This is a RTC additional function. This is only for Nucleo F401RE & F411RE mbed(Added L152RE, F334R8, L476RG & F746xx). If you connected battery backup circuit for internal RTC, you can make a power-off and reset condition. RTC still has proper time and date.
Dependents: Nucleo_rtos_sample PB_Emma_Ethernet
Please refer following NOTE information.
/users/kenjiArai/notebook/nucleo-series-rtc-control-under-power-onoff-and-re/
Diff: rtc_api_F334.c
- Revision:
- 13:44e5327acb05
- Parent:
- 9:1af4e107ca7b
--- a/rtc_api_F334.c Fri Jan 29 07:35:34 2016 +0000 +++ b/rtc_api_F334.c Fri May 27 20:16:09 2016 +0000 @@ -1,278 +1,294 @@ -#if 0 -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#include "rtc_api.h" - -#if DEVICE_RTC - -#include "mbed_error.h" - -static int rtc_inited = 0; - -static RTC_HandleTypeDef RtcHandle; - -//#define ORIGINAL -#if defined(ORIGINAL) -#warning "You cannot use SetRTC functions" -#else -#warning "You modified mbed-src rtc_api.c for SetRTC functions" -#endif - -#if defined(ORIGINAL) // modify part1 of 4 (Start) -#else -#define RTC_DAT0 0x55aa55aa -#define RTC_DAT1 0xaa55aa55 - -uint32_t RTC_ReadBackupRegister(uint32_t RTC_BKP_DR) -{ - __IO uint32_t tmp = 0; - - // Check the parameters - assert_param(IS_RTC_BKP(RTC_BKP_DR)); - tmp = RTC_BASE + 0x50; - tmp += (RTC_BKP_DR * 4); - // Read the specified register - return (*(__IO uint32_t *)tmp); -} - -/* Check RTC Backup registers contents */ -uint32_t Check_Rtc_backup_reg( void ) -{ - if ( RTC_ReadBackupRegister( RTC_BKP_DR0 ) == RTC_DAT0 ) { - if ( RTC_ReadBackupRegister( RTC_BKP_DR1 ) == RTC_DAT1 ) { - return 1; - } - } - return 0; -} - -void RTC_WriteBackupRegister(uint32_t RTC_BKP_DR, uint32_t Data) -{ - __IO uint32_t tmp = 0; - - // Check the parameters/ - assert_param(IS_RTC_BKP(RTC_BKP_DR)); - tmp = RTC_BASE + 0x50; - tmp += (RTC_BKP_DR * 4); - // Write the specified register/ - *(__IO uint32_t *)tmp = (uint32_t)Data; -} -#endif // modify part1 of 4 (End) - -void rtc_init(void) -{ - RCC_OscInitTypeDef RCC_OscInitStruct; - uint32_t rtc_freq = 0; - -#if defined(ORIGINAL) // modify part2 of 4 (Start) - if (rtc_inited) return; - rtc_inited = 1; - - RtcHandle.Instance = RTC; - - // Enable Power clock - __PWR_CLK_ENABLE(); - - // Enable access to Backup domain - HAL_PWR_EnableBkUpAccess(); -#else - RtcHandle.Instance = RTC; - - // Enable Power clock - __PWR_CLK_ENABLE(); - - // Enable access to Backup domain - HAL_PWR_EnableBkUpAccess(); - - // Check backup condition - if ( Check_Rtc_backup_reg() ) { - return; - } -#endif // modify part2 of 4 (End) - - // Reset Backup domain - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - - // Enable LSE Oscillator - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; /* Mandatory, otherwise the PLL is reconfigured! */ - RCC_OscInitStruct.LSEState = RCC_LSE_ON; /* External 32.768 kHz clock on OSC_IN/OSC_OUT */ - if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { - // Connect LSE to RTC - __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE); - rtc_freq = LSE_VALUE; - } else { - // Enable LSI clock - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured! - RCC_OscInitStruct.LSEState = RCC_LSE_OFF; - RCC_OscInitStruct.LSIState = RCC_LSI_ON; - if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { - error("RTC error: LSI clock initialization failed."); - } - // Connect LSI to RTC - __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI); - // Note: The LSI clock can be measured precisely using a timer input capture. - rtc_freq = LSI_VALUE; - } - - // Enable RTC - __HAL_RCC_RTC_ENABLE(); - - RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24; - RtcHandle.Init.AsynchPrediv = 127; - RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1; - RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE; - RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; - RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; - -#if defined(ORIGINAL) // modify part3 of 4 (Start) -#else - /* Write backup data into the backup RAM */ - RTC_WriteBackupRegister( RTC_BKP_DR0, RTC_DAT0 ); - RTC_WriteBackupRegister( RTC_BKP_DR1, RTC_DAT1 ); -#endif // modify part3 of 4 (End) - - if (HAL_RTC_Init(&RtcHandle) != HAL_OK) { - error("RTC error: RTC initialization failed."); - } -} - -void rtc_free(void) -{ - // Enable Power clock - __PWR_CLK_ENABLE(); - - // Enable access to Backup domain - HAL_PWR_EnableBkUpAccess(); - - // Reset Backup domain - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - - // Disable access to Backup domain - HAL_PWR_DisableBkUpAccess(); - - // Disable LSI and LSE clocks - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; - RCC_OscInitStruct.LSIState = RCC_LSI_OFF; - RCC_OscInitStruct.LSEState = RCC_LSE_OFF; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - rtc_inited = 0; -} - -int rtc_isenabled(void) -{ -#if defined(ORIGINAL) // modify part4 of 4 (Start) - return rtc_inited; -#else - return Check_Rtc_backup_reg(); -#endif // modify part4 of 4 (End) -} - -/* - RTC Registers - RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday - RTC_Month 1=january, 2=february, ..., 12=december - RTC_Date day of the month 1-31 - RTC_Year year 0-99 - struct tm - tm_sec seconds after the minute 0-61 - tm_min minutes after the hour 0-59 - tm_hour hours since midnight 0-23 - tm_mday day of the month 1-31 - tm_mon months since January 0-11 - tm_year years since 1900 - tm_wday days since Sunday 0-6 - tm_yday days since January 1 0-365 - tm_isdst Daylight Saving Time flag -*/ -time_t rtc_read(void) -{ - RTC_DateTypeDef dateStruct; - RTC_TimeTypeDef timeStruct; - struct tm timeinfo; - - RtcHandle.Instance = RTC; - - // Read actual date and time - // Warning: the time must be read first! - HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN); - HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN); - - // Setup a tm structure based on the RTC - timeinfo.tm_wday = dateStruct.WeekDay; - timeinfo.tm_mon = dateStruct.Month - 1; - timeinfo.tm_mday = dateStruct.Date; - timeinfo.tm_year = dateStruct.Year + 100; - timeinfo.tm_hour = timeStruct.Hours; - timeinfo.tm_min = timeStruct.Minutes; - timeinfo.tm_sec = timeStruct.Seconds; - - // Convert to timestamp - time_t t = mktime(&timeinfo); - - return t; -} - -void rtc_write(time_t t) -{ - RTC_DateTypeDef dateStruct; - RTC_TimeTypeDef timeStruct; - - RtcHandle.Instance = RTC; - - // Convert the time into a tm - struct tm *timeinfo = localtime(&t); - - // Fill RTC structures - dateStruct.WeekDay = timeinfo->tm_wday; - dateStruct.Month = timeinfo->tm_mon + 1; - dateStruct.Date = timeinfo->tm_mday; - dateStruct.Year = timeinfo->tm_year - 100; - timeStruct.Hours = timeinfo->tm_hour; - timeStruct.Minutes = timeinfo->tm_min; - timeStruct.Seconds = timeinfo->tm_sec; - timeStruct.TimeFormat = RTC_HOURFORMAT12_PM; - timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE; - timeStruct.StoreOperation = RTC_STOREOPERATION_RESET; - - // Change the RTC current date/time - HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN); - HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN); -} - -#endif - -#endif +#if 0 +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#include "rtc_api.h" + +#if DEVICE_RTC + +#include "mbed_error.h" + +#if DEVICE_RTC_LSI +static int rtc_inited = 0; +#endif + +static RTC_HandleTypeDef RtcHandle; + +//#define ORIGINAL +#if defined(ORIGINAL) +#warning "You cannot use SetRTC functions" +#else +#warning "You modified mbed-src rtc_api.c for SetRTC functions" +#endif + +#if defined(ORIGINAL) // modify part1 of 4 (Start) +#else +#define RTC_DAT0 0x55aa55aa +#define RTC_DAT1 0xaa55aa55 + +uint32_t RTC_ReadBackupRegister(uint32_t RTC_BKP_DR) +{ + __IO uint32_t tmp = 0; + + // Check the parameters + assert_param(IS_RTC_BKP(RTC_BKP_DR)); + tmp = RTC_BASE + 0x50; + tmp += (RTC_BKP_DR * 4); + // Read the specified register + return (*(__IO uint32_t *)tmp); +} + +/* Check RTC Backup registers contents */ +uint32_t Check_Rtc_backup_reg( void ) +{ + if ( RTC_ReadBackupRegister( RTC_BKP_DR0 ) == RTC_DAT0 ) { + if ( RTC_ReadBackupRegister( RTC_BKP_DR1 ) == RTC_DAT1 ) { + return 1; + } + } + return 0; +} + +void RTC_WriteBackupRegister(uint32_t RTC_BKP_DR, uint32_t Data) +{ + __IO uint32_t tmp = 0; + + // Check the parameters/ + assert_param(IS_RTC_BKP(RTC_BKP_DR)); + tmp = RTC_BASE + 0x50; + tmp += (RTC_BKP_DR * 4); + // Write the specified register/ + *(__IO uint32_t *)tmp = (uint32_t)Data; +} +#endif // modify part1 of 4 (End) + +void rtc_init(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct; + uint32_t rtc_freq = 0; + +#if DEVICE_RTC_LSI + rtc_inited = 1; +#endif + + RtcHandle.Instance = RTC; + +#if defined(ORIGINAL) // modify part2 of 4 (Start) +#else + RtcHandle.Instance = RTC; + + // Enable Power clock + __PWR_CLK_ENABLE(); + + // Enable access to Backup domain + HAL_PWR_EnableBkUpAccess(); + + // Check backup condition + if ( Check_Rtc_backup_reg() ) { + return; + } +#endif // modify part2 of 4 (End) +#if !DEVICE_RTC_LSI + // Enable LSE Oscillator + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; /* Mandatory, otherwise the PLL is reconfigured! */ + RCC_OscInitStruct.LSEState = RCC_LSE_ON; /* External 32.768 kHz clock on OSC_IN/OSC_OUT */ + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + // Connect LSE to RTC + __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE); + rtc_freq = LSE_VALUE; + } + else { + error("RTC error: LSE clock initialization failed."); + } +#else + // Enable Power clock + __PWR_CLK_ENABLE(); + + // Enable access to Backup domain + HAL_PWR_EnableBkUpAccess(); + + // Reset Backup domain + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + + // Enable LSI clock + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured! + RCC_OscInitStruct.LSEState = RCC_LSE_OFF; + RCC_OscInitStruct.LSIState = RCC_LSI_ON; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + error("RTC error: LSI clock initialization failed."); + } + // Connect LSI to RTC + __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI); + // Note: The LSI clock can be measured precisely using a timer input capture. + rtc_freq = LSI_VALUE; +#endif + + // Enable RTC + __HAL_RCC_RTC_ENABLE(); + + RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24; + RtcHandle.Init.AsynchPrediv = 127; + RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1; + RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE; + RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; + RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; + +#if defined(ORIGINAL) // modify part3 of 4 (Start) +#else + /* Write backup data into the backup RAM */ + RTC_WriteBackupRegister( RTC_BKP_DR0, RTC_DAT0 ); + RTC_WriteBackupRegister( RTC_BKP_DR1, RTC_DAT1 ); +#endif // modify part3 of 4 (End) + + if (HAL_RTC_Init(&RtcHandle) != HAL_OK) { + error("RTC error: RTC initialization failed."); + } +} + +void rtc_free(void) +{ +#if DEVICE_RTC_LSI + // Enable Power clock + __PWR_CLK_ENABLE(); + + // Enable access to Backup domain + HAL_PWR_EnableBkUpAccess(); + + // Reset Backup domain + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + + // Disable access to Backup domain + HAL_PWR_DisableBkUpAccess(); +#endif + + // Disable LSI and LSE clocks + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + RCC_OscInitStruct.LSIState = RCC_LSI_OFF; + RCC_OscInitStruct.LSEState = RCC_LSE_OFF; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + +#if DEVICE_RTC_LSI + rtc_inited = 0; +#endif +} + +int rtc_isenabled(void) +{ +#if DEVICE_RTC_LSI + return rtc_inited; +#else +#if defined(ORIGINAL) // modify part4 of 4 (Start) + if ((RTC->ISR & RTC_ISR_INITS) == RTC_ISR_INITS) return 1; + else return 0; +#else + return Check_Rtc_backup_reg(); +#endif // modify part4 of 4 (End) +#endif +} + +/* + RTC Registers + RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday + RTC_Month 1=january, 2=february, ..., 12=december + RTC_Date day of the month 1-31 + RTC_Year year 0-99 + struct tm + tm_sec seconds after the minute 0-61 + tm_min minutes after the hour 0-59 + tm_hour hours since midnight 0-23 + tm_mday day of the month 1-31 + tm_mon months since January 0-11 + tm_year years since 1900 + tm_wday days since Sunday 0-6 + tm_yday days since January 1 0-365 + tm_isdst Daylight Saving Time flag +*/ +time_t rtc_read(void) +{ + RTC_DateTypeDef dateStruct; + RTC_TimeTypeDef timeStruct; + struct tm timeinfo; + + RtcHandle.Instance = RTC; + + // Read actual date and time + // Warning: the time must be read first! + HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN); + HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN); + + // Setup a tm structure based on the RTC + timeinfo.tm_wday = dateStruct.WeekDay; + timeinfo.tm_mon = dateStruct.Month - 1; + timeinfo.tm_mday = dateStruct.Date; + timeinfo.tm_year = dateStruct.Year + 100; + timeinfo.tm_hour = timeStruct.Hours; + timeinfo.tm_min = timeStruct.Minutes; + timeinfo.tm_sec = timeStruct.Seconds; + + // Convert to timestamp + time_t t = mktime(&timeinfo); + + return t; +} + +void rtc_write(time_t t) +{ + RTC_DateTypeDef dateStruct; + RTC_TimeTypeDef timeStruct; + + RtcHandle.Instance = RTC; + + // Convert the time into a tm + struct tm *timeinfo = localtime(&t); + + // Fill RTC structures + dateStruct.WeekDay = timeinfo->tm_wday; + dateStruct.Month = timeinfo->tm_mon + 1; + dateStruct.Date = timeinfo->tm_mday; + dateStruct.Year = timeinfo->tm_year - 100; + timeStruct.Hours = timeinfo->tm_hour; + timeStruct.Minutes = timeinfo->tm_min; + timeStruct.Seconds = timeinfo->tm_sec; + timeStruct.TimeFormat = RTC_HOURFORMAT12_PM; + timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE; + timeStruct.StoreOperation = RTC_STOREOPERATION_RESET; + + // Change the RTC current date/time + HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN); + HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN); +} + +#endif +#endif