Extended library from C12832 Lib. by Peter Drescher, Chris Styles & Mihail Stoyanov. LCD in the market such as AQM1248A (Akizuki), AD-12864-SPI (antendo), NHD-C12832 (Newhaven), ST7565 (adafruit) and so on
Dependents: CW_Decoder_using_FFT_on_F446 LPC1114_SPI_LCD_ST7565family_test
Fork of C12832 by
Original library is below link.
http://mbed.org/teams/components/code/C12832/
https://mbed.org/users/dreschpe/code/C12832_lcd/
I extended applicable LCD's not only 128 x 32 but also 128 x 48 and 128 x 64 type of SPI LCD using ST7565 controller.
I have checked AD-12864-SPI and AQM1248 LCD.
Import programLPC1114_SPI_LCD_ST7565family_test
Controller chip is ST7565
Revision 23:233a0d635d9d, committed 2020-08-05
- Comitter:
- kenjiArai
- Date:
- Wed Aug 05 05:08:59 2020 +0000
- Parent:
- 22:7d03976a0cb3
- Commit message:
- added #include "Stream.h" line for running on mbed-os6.2.0
Changed in this revision
--- a/ST7565_SPI_LCD.cpp Sat Dec 13 05:29:11 2014 +0000 +++ b/ST7565_SPI_LCD.cpp Wed Aug 05 05:08:59 2020 +0000 @@ -1,16 +1,17 @@ /* EXTEND for SPI interface LCD which is using ST7565 controller - Modified by Kenji Arai / JH1PJL - http://www.page.sannet.ne.jp/kenjia/index.html - http://mbed.org/users/kenjiArai/ + Modified by Kenji Arai / JH1PJL + http://www7b.biglobe.ne.jp/~kenjia/ + https://os.mbed.com/users/kenjiArai/ Started: September 20th, 2014 Revised: December 13th, 2014 + Revised: August 5th, 2020 original file: C12832.cpp original Library name: C12832 */ -//---------- ORIGINAL Header ---------------------------------------------------- +//---------- ORIGINAL Header --------------------------------------------------- /* mbed library for the mbed Lab Board 128*32 pixel LCD * use C12832 controller * Copyright (c) 2012 Peter Drescher - DC2PD @@ -40,38 +41,50 @@ //#define DEBUG // Com #ifdef DEBUG -#define BAUD(x) pcx.baud(x) -#define GETC(x) pcx.getc(x) -#define PUTC(x) pcx.putc(x) -#define PRINTF(...) pcx.printf(__VA_ARGS__) -#define READABLE(x) pcx.readable(x) +#define PRINTF(...) printf(__VA_ARGS__) #else -#define BAUD(x) {;} -#define GETC(x) {;} -#define PUTC(x) {;} #define PRINTF(...) {;} -#define READABLE(x) {;} -#endif -#ifdef DEBUG -// com !!!Please specify the pin!!!! -Serial pcx(?,?); // Communication with Host #endif -ST7565::ST7565(PinName mosi, PinName sck, - PinName reset, PinName a0, PinName ncs, LCDType type, const char* name) - : GraphicsDisplay(name),_spi(mosi,NC,sck),_reset(reset),_A0(a0),_CS(ncs) +ST7565::ST7565 +( + PinName mosi, PinName sck, + PinName reset, + PinName a0, + PinName ncs, + LCDType type, + const char* name +): + GraphicsDisplay(name), + _spi_p(new SPI(mosi,NC,sck)), _spi(*_spi_p), + _reset(reset), + _A0(a0), + _CS(ncs) { initialize(type); } -ST7565::ST7565(SPI& p_spi, PinName reset, PinName a0, PinName ncs, LCDType type, const char* name) - : GraphicsDisplay(name),_spi(p_spi),_reset(reset),_A0(a0),_CS(ncs) +ST7565::ST7565 +( + SPI& p_spi, + PinName reset, + PinName a0, + PinName ncs, + LCDType type, + const char* name +): + GraphicsDisplay(name), + _spi(p_spi), + _reset(reset), + _A0(a0), + _CS(ncs) { initialize(type); } -void ST7565::initialize(LCDType type){ - switch (type){ +void ST7565::initialize(LCDType type) +{ + switch (type) { case LCD128x32: lcd_width = 128; lcd_height = 32; @@ -80,7 +93,7 @@ lcd_width = 128; lcd_height = 48; break; - case LCD128x64: + case LCD128x64: lcd_width = 128; lcd_height = 64; break; @@ -93,37 +106,43 @@ lcd_reset(); } -int ST7565::width(){ +int ST7565::width() +{ // PRINTF("W:%d",lcd_width); return(lcd_width); } -int ST7565::height(){ +int ST7565::height() +{ // PRINTF("H:%d",lcd_height); return(lcd_height); } -void ST7565::invert(unsigned int o){ - if(o == 0){ +void ST7565::invert(unsigned int o) +{ + if(o == 0) { wr_cmd(0xA6); } else { wr_cmd(0xA7); } } -void ST7565::set_contrast(unsigned int o){ +void ST7565::set_contrast(unsigned int o) +{ contrast = o; wr_cmd(0x23); // Vo voltage reg. wr_cmd(0x81); // set volume wr_cmd(o & 0x3F); } -unsigned int ST7565::get_contrast(void){ +unsigned int ST7565::get_contrast(void) +{ return(contrast); } // write command to lcd controller -void ST7565::wr_cmd(unsigned char cmd){ +void ST7565::wr_cmd(unsigned char cmd) +{ _A0 = 0; _CS = 0; _spi.write(cmd); @@ -131,7 +150,8 @@ } // write data to lcd controller -void ST7565::wr_dat(unsigned char dat){ +void ST7565::wr_dat(unsigned char dat) +{ _A0 = 1; _CS = 0; _spi.write(dat); @@ -139,7 +159,8 @@ } // reset and init the lcd controller -void ST7565::lcd_reset(){ +void ST7565::lcd_reset() +{ _spi.format(8,0); _spi.frequency(10000000); // 10 MHz SPI clock _A0 = 0; @@ -147,7 +168,7 @@ _reset = 0; // display reset wait_us(50); _reset = 1; // end reset - wait_ms(5); + ThisThread::sleep_for(5ms); // initialize sequence wr_cmd(0xaf); // display on wr_cmd(0x2f); // power control set @@ -174,7 +195,8 @@ } // set one pixel in buffer -void ST7565::pixel(int x, int y, int color){ +void ST7565::pixel(int x, int y, int color) +{ // first check parameter if(x > lcd_width || y > lcd_height || x < 0 || y < 0) return; if(draw_mode == NORMAL) { @@ -189,9 +211,10 @@ } // update lcd -void ST7565::copy_to_lcd(void){ -int i=0; - +void ST7565::copy_to_lcd(void) +{ + int i=0; + // page 0 wr_cmd(0x00); // set column low nibble 0 wr_cmd(0x10); // set column hi nibble 0 @@ -224,7 +247,7 @@ for(i=384; i<512; i++) { wr_dat(buffer[i]); } - if ((lcd_height == 48) || (lcd_height == 64)){ + if ((lcd_height == 48) || (lcd_height == 64)) { // page 4 wr_cmd(0x00); // set column low nibble 0 wr_cmd(0x10); // set column hi nibble 0 @@ -241,8 +264,8 @@ for(i=640; i<768; i++) { wr_dat(buffer[i]); } - } - if (lcd_height == 64){ + } + if (lcd_height == 64) { // page 6 wr_cmd(0x00); // set column low nibble 0 wr_cmd(0x10); // set column hi nibble 0 @@ -263,16 +286,18 @@ _CS = 0; } -void ST7565::cls(void){ +void ST7565::cls(void) +{ memset(buffer,0x00,1024); // clear display buffer copy_to_lcd(); } -void ST7565::line(int x0, int y0, int x1, int y1, int color){ -int dx = 0, dy = 0; -int dx_sym = 0, dy_sym = 0; -int dx_x2 = 0, dy_x2 = 0; -int di = 0; +void ST7565::line(int x0, int y0, int x1, int y1, int color) +{ + int dx = 0, dy = 0; + int dx_sym = 0, dy_sym = 0; + int dx_x2 = 0, dy_x2 = 0; + int di = 0; dx = x1-x0; dy = y1-y0; @@ -327,23 +352,41 @@ } pixel(x0, y0, color); } - if(auto_up){ copy_to_lcd();} + if(auto_up) { + copy_to_lcd(); + } } -void ST7565::rect(int x0, int y0, int x1, int y1, int color){ - if (x1 > x0){ line(x0,y0,x1,y0,color); - } else { line(x1,y0,x0,y0,color);} - if (y1 > y0){ line(x0,y0,x0,y1,color); - } else { line(x0,y1,x0,y0,color);} - if (x1 > x0){ line(x0,y1,x1,y1,color); - } else { line(x1,y1,x0,y1,color);} - if (y1 > y0){ line(x1,y0,x1,y1,color); - } else { line(x1,y1,x1,y0,color);} - if(auto_up){ copy_to_lcd();} +void ST7565::rect(int x0, int y0, int x1, int y1, int color) +{ + if (x1 > x0) { + line(x0,y0,x1,y0,color); + } else { + line(x1,y0,x0,y0,color); + } + if (y1 > y0) { + line(x0,y0,x0,y1,color); + } else { + line(x0,y1,x0,y0,color); + } + if (x1 > x0) { + line(x0,y1,x1,y1,color); + } else { + line(x1,y1,x0,y1,color); + } + if (y1 > y0) { + line(x1,y0,x1,y1,color); + } else { + line(x1,y1,x1,y0,color); + } + if(auto_up) { + copy_to_lcd(); + } } -void ST7565::fillrect(int x0, int y0, int x1, int y1, int color){ -int l,c,i; +void ST7565::fillrect(int x0, int y0, int x1, int y1, int color) +{ + int l,c,i; if(x0 > x1) { i = x0; @@ -360,20 +403,23 @@ pixel(l,c,color); } } - if(auto_up){ copy_to_lcd();} + if(auto_up) { + copy_to_lcd(); + } } -void ST7565::circle(int x0, int y0, int r, int color){ -int draw_x0, draw_y0; -int draw_x1, draw_y1; -int draw_x2, draw_y2; -int draw_x3, draw_y3; -int draw_x4, draw_y4; -int draw_x5, draw_y5; -int draw_x6, draw_y6; -int draw_x7, draw_y7; -int xx, yy; -int di; +void ST7565::circle(int x0, int y0, int r, int color) +{ + int draw_x0, draw_y0; + int draw_x1, draw_y1; + int draw_x2, draw_y2; + int draw_x3, draw_y3; + int draw_x4, draw_y4; + int draw_x5, draw_y5; + int draw_x6, draw_y6; + int draw_x7, draw_y7; + int xx, yy; + int di; //WindowMax(); if (r == 0) { /* no radius */ @@ -429,65 +475,75 @@ draw_y5++; draw_y6--; draw_y7--; - if ((draw_x0 <= width()) && (draw_y0>=0)){ + if ((draw_x0 <= width()) && (draw_y0>=0)) { pixel(draw_x0, draw_y0, color); } - if ((draw_x1 >= 0) && (draw_y1 >= 0)){ + if ((draw_x1 >= 0) && (draw_y1 >= 0)) { pixel(draw_x1, draw_y1, color); } - if ((draw_x2 <= width()) && (draw_y2 <= height())){ + if ((draw_x2 <= width()) && (draw_y2 <= height())) { pixel(draw_x2, draw_y2, color); } - if ((draw_x3 >=0 ) && (draw_y3 <= height())){ + if ((draw_x3 >=0 ) && (draw_y3 <= height())) { pixel(draw_x3, draw_y3, color); } - if ((draw_x4 <= width()) && (draw_y4 >= 0)){ + if ((draw_x4 <= width()) && (draw_y4 >= 0)) { pixel(draw_x4, draw_y4, color); } - if ((draw_x5 >= 0) && (draw_y5 >= 0)){ + if ((draw_x5 >= 0) && (draw_y5 >= 0)) { pixel(draw_x5, draw_y5, color); } - if ((draw_x6 <=width()) && (draw_y6 <= height())){ + if ((draw_x6 <=width()) && (draw_y6 <= height())) { pixel(draw_x6, draw_y6, color); } - if ((draw_x7 >= 0) && (draw_y7 <= height())){ + if ((draw_x7 >= 0) && (draw_y7 <= height())) { pixel(draw_x7, draw_y7, color); } } - if(auto_up){ copy_to_lcd();} + if(auto_up) { + copy_to_lcd(); + } } -void ST7565::fillcircle(int x, int y, int r, int color){ -int i,up; +void ST7565::fillcircle(int x, int y, int r, int color) +{ + int i,up; up = auto_up; auto_up = 0; // off - for (i = 0; i <= r; i++){ + for (i = 0; i <= r; i++) { circle(x,y,i,color); } auto_up = up; - if(auto_up){ copy_to_lcd();} + if(auto_up) { + copy_to_lcd(); + } } -void ST7565::setmode(int mode){ +void ST7565::setmode(int mode) +{ draw_mode = mode; } -void ST7565::locate(int x, int y){ +void ST7565::locate(int x, int y) +{ char_x = x; char_y = y; } -int ST7565::columns(){ +int ST7565::columns() +{ return width() / font[1]; } -int ST7565::rows(){ +int ST7565::rows() +{ return height() / font[2]; } -void ST7565::line_clear(int y){ -unsigned int vert,j,i,x; +void ST7565::line_clear(int y) +{ + unsigned int vert,j,i,x; // read font parameter from start of array vert = font[2]; // get vert size of font @@ -496,39 +552,45 @@ for (i=0; i<width(); i++) { // horz line pixel(x+i,y+j,0); } - } + } } -int ST7565::_putc(int value){ +int ST7565::_putc(int value) +{ if (value == 0x0d) { // new line char_x = 0; char_y = char_y + font[2]; - if (char_y >= height() - font[2]){ + if (char_y >= height() - font[2]) { char_y = 0; } line_clear(char_y); } else { character(char_x, char_y, value); - if(auto_up){ copy_to_lcd();} + if(auto_up) { + copy_to_lcd(); + } } return value; } -void ST7565::character(int x, int y, int c){ -unsigned int hor,vert,offset,bpl,j,i,b; -unsigned char* zeichen; -unsigned char z,w; +void ST7565::character(int x, int y, int c) +{ + unsigned int hor,vert,offset,bpl,j,i,b; + unsigned char* zeichen; + unsigned char z,w; - if ((c < 31) || (c > 127)){ return;} // test char range + if ((c < 31) || (c > 127)) { + return; // test char range + } // read font parameter from start of array offset = font[0]; // bytes / char hor = font[1]; // get hor size of font vert = font[2]; // get vert size of font bpl = font[3]; // bytes per line - if (char_x + hor > width()){ + if (char_x + hor > width()) { char_x = 0; char_y = char_y + vert; - if (char_y >= height() - font[2]){ + if (char_y >= height() - font[2]) { char_y = 0; } } @@ -550,7 +612,7 @@ if(char_x >= (width() - hor)) { char_x = 0; char_y = char_y + vert; - if (char_y >= height() - font[2]){ + if (char_y >= height() - font[2]) { char_y = 0; } line_clear(char_y); @@ -558,30 +620,38 @@ //PRINTF("C:%d %d %d %d %d %d\r\n",offset,hor,vert,bpl,char_x,char_y); } -void ST7565::set_font(unsigned char* f){ +void ST7565::set_font(unsigned char* f) +{ font = f; } -void ST7565::set_auto_up(unsigned int up){ - if(up){ +void ST7565::set_auto_up(unsigned int up) +{ + if(up) { auto_up = 1; } else { auto_up = 0; } } -unsigned int ST7565::get_auto_up(void){ +unsigned int ST7565::get_auto_up(void) +{ return (auto_up); } -void ST7565::print_bm(Bitmap bm, int x, int y){ -int h,v,b; -char d; +void ST7565::print_bm(Bitmap bm, int x, int y) +{ + int h,v,b; + char d; for(v=0; v < bm.ySize; v++) { // lines for(h=0; h < bm.xSize; h++) { // pixel - if(h + x > 127){ break; } - if(v + y > 31){ break; } + if(h + x > 127) { + break; + } + if(v + y > 31) { + break; + } d = bm.data[bm.Byte_in_Line * v + ((h & 0xF8) >> 3)]; b = 0x80 >> (h & 0x07); if((d & b) == 0) {
--- a/ST7565_SPI_LCD.h Sat Dec 13 05:29:11 2014 +0000 +++ b/ST7565_SPI_LCD.h Wed Aug 05 05:08:59 2020 +0000 @@ -1,16 +1,17 @@ /* EXTEND for SPI interface LCD which is using ST7565 controller - Modified by Kenji Arai / JH1PJL - http://www.page.sannet.ne.jp/kenjia/index.html - http://mbed.org/users/kenjiArai/ + Modified by Kenji Arai / JH1PJL + http://www7b.biglobe.ne.jp/~kenjia/ + https://os.mbed.com/users/kenjiArai/ Started: September 20th, 2014 Revised: November 29th, 2014 + Revised: August 5th, 2020 original file: C12832.h original Library name: C12832 */ -//---------- ORIGINAL Header ---------------------------------------------------- +//---------- ORIGINAL Header --------------------------------------------------- /* mbed library for the mbed Lab Board 128*32 pixel LCD * use C12832 controller * Copyright (c) 2012 Peter Drescher - DC2PD @@ -33,12 +34,12 @@ /** Bitmap */ -struct Bitmap{ +struct Bitmap { int xSize; int ySize; int Byte_in_Line; char* data; - }; +}; /** SPI LCD control library for ST7565 Controller * http://www.ladyada.net/learn/lcd/st7565.html @@ -48,12 +49,14 @@ * * @code * #include "mbed.h" - * - * #if 1 - * ST7565 lcd(dp2, dp6, dp10, dp4, dp9, ST7565::AD12864SPI); // mosi, sck, reset, a0, ncs + * + * #if 1 + * // mosi, sck, reset, a0, ncs + * ST7565 lcd(dp2, dp6, dp10, dp4, dp9, ST7565::AD12864SPI); * #else * SPI spi_lcd(dp2, dp1, dp6); // mosi, miso, sck - * ST7565 lcd(spi_lcd, dp10, dp4, dp9, ST7565::AD12864SPI); // spi, reset, a0, ncs + * // spi, reset, a0, ncs + * ST7565 lcd(spi_lcd, dp10, dp4, dp9, ST7565::AD12864SPI); * #endif * * int main() { @@ -69,26 +72,37 @@ * @endcode */ -class ST7565 : public GraphicsDisplay{ +class ST7565 : public GraphicsDisplay +{ public: /** LCD panel format */ enum LCDType { - LCD128x32, + LCD128x32, LCD128x48, LCD128x64, AQM1248A = LCD128x48, AD12864SPI = LCD128x64, - ST7565LCD = LCD128x64 + ST7565LCD = LCD128x64 }; - + /** * Create a ST7565 object connected to SPI1 */ ST7565(PinName mosi, PinName sck, - PinName reset, PinName a0, PinName ncs, LCDType type, const char* name = "LCD"); + PinName reset, + PinName a0, + PinName ncs, + LCDType type, + const char* name = "LCD" + ); ST7565(SPI& _spi, - PinName reset, PinName a0, PinName ncs, LCDType type, const char* name = "LCD"); + PinName reset, + PinName a0, + PinName ncs, + LCDType type, + const char* name = "LCD" + ); /** * Get the width of the screen in pixel @@ -224,13 +238,13 @@ * @param y y-position */ virtual void locate(int x, int y); - + /** - * Setup auto update of screen + * Setup auto update of screen * * @param up 1 = on , 0 = off * - * if switched off the program has to call copy_to_lcd() + * if switched off the program has to call copy_to_lcd() * to update screen from framebuffer */ void set_auto_up(unsigned int up); @@ -247,8 +261,8 @@ * * @param f pointer to font array * - * font array can created with GLCD Font Creator from http://www.mikroe.com - * you have to add 4 parameter at the beginning of the font array to use: + * font array can created with GLCD Font Creator from http://www.mikroe.com + * you have to add 4 parameter at the beginning of the font array to use: * - the number of byte / char * - the vertial size in pixel * - the horizontal size in pixel @@ -256,7 +270,7 @@ * you also have to change the array to char[] */ void set_font(unsigned char* f); - + /** * Print bitmap to buffer * @@ -290,15 +304,16 @@ /** Draw color */ enum {WHITE = 0,BLACK}; - + /** Draw mode * NORMAl * XOR set pixel by xor the screen */ enum {NORMAL,XOR}; - + /** Vars */ - SPI _spi; + SPI *_spi_p; + SPI &_spi; DigitalOut _reset; DigitalOut _A0; DigitalOut _CS; @@ -314,7 +329,7 @@ void initialize(LCDType type); virtual int _putc(int value); - + unsigned int lcd_width; unsigned int lcd_height; unsigned int char_x;
--- a/TextDisplay.h Sat Dec 13 05:29:11 2014 +0000 +++ b/TextDisplay.h Wed Aug 05 05:08:59 2020 +0000 @@ -17,6 +17,7 @@ #define MBED_TEXTDISPLAY_H #include "mbed.h" +#include "Stream.h" // need on mbed-os-6.2.0, Aug. 5th, 2020 by JH1PJL /** * TextDisplay interface