Kenji Arai
Check System frequency of Nucleo F411RE board. Also F401RE.
You are viewing an older revision! See the latest version
Homepage
I made a clock checking program for Nucleo F411RE and F401 mbed board.
Picture shows F411RE example.
System frequency is 100MHz. Looks okay for me.
USB frequency is 44.4MHz? -> USB clock needs accurate frequency 48MHz.
Once keeping 100MHz system clock freq., we can select PLLQ value only 9 or 8.
If PLLQ=9, USB Freq. is 44.4MHz (current setting).
If PLLQ=8, USB Freq. is 50.0MHz.
Best selection looks follows.
PLL clock -> HSE = 8MHz
PLLN= 192, PLLM = 4
PLL Freq. = (PLL Clock)*(PLLN/PLLM) = 8MHz * 192 / 4 = 384MHz
System clock = (PLL Freq.)/PLLP = 384MHz/4 = 96MHz
USB clock = (PLL Freq.)/PLLQ = 384MHz/8 = 48MHz
Is this result okay?
or
Is my program wrong?