Kenji Arai
Monitor program only for mbed GR-PEACH
Diff: debug_tools/debug_lpc1114.cpp
- Revision:
- 5:1d465d550109
- Parent:
- 4:76b3113c79ff
--- a/debug_tools/debug_lpc1114.cpp Sun Dec 14 09:17:01 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,146 +0,0 @@
-/*
- * mbed Application program
- *
- * Copyright (c) 2010-2014 Kenji Arai / JH1PJL
- * http://www.page.sannet.ne.jp/kenjia/index.html
- * http://mbed.org/users/kenjiArai/
- * Created: May 15th, 2010
- * Spareted: June 25th, 2014 mon() & mon_hw()
- * Ported: September 22nd, 2014 from L152RE, LP1114
- * changed: October 15th, 2014 mon.cpp to debug_xxx.cpp
- * Revised: Nobember 2nd, 2014
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
- * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
- * AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
- * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#if defined(TARGET_LPC1114)
-
-// Include ---------------------------------------------------------------------------------------
-#include "mbed.h"
-#include "debug_common.h"
-
-// Object ----------------------------------------------------------------------------------------
-
-// Definition ------------------------------------------------------------------------------------
-
-// RAM -------------------------------------------------------------------------------------------
-
-// ROM / Constant data ---------------------------------------------------------------------------
-
-// Function prototypes ---------------------------------------------------------------------------
-extern void cpu_inf (void);
-
-//-------------------------------------------------------------------------------------------------
-// Control Program
-//-------------------------------------------------------------------------------------------------
-// Help Massage
-void msg_hlp (void)
-{
- PRINTF(mon_msg);
- put_rn();
- PRINTF("1 - goto step1 -> no connection all pins");
- put_rn();
- PRINTF("2 - goto step2 -> connects pin_x and pin_y");
- put_rn();
- PRINTF("x - Goto HW monitor");
- put_rn();
- PRINTF("q - Return to main");
- put_rn();
-}
-
-// ---------- Program starts here! ---------------------------------------------------------------
-void debug_interface(void)
-{
- char *ptr;
- uint8_t quitflag;
-
- BAUD(BAUD_RATE);
- put_rn();
- put_rn();
- PRINTF("%s [Help:'?' key]", mon_msg);
- put_rn();
- for (;;) {
- put_r();
- PUTC('>');
- ptr = linebuf;
- get_line(ptr, sizeof(linebuf));
- switch (*ptr++) {
- //---------------------------------------------------------------------------------
- // Debug Step1
- //---------------------------------------------------------------------------------
- case '1' :
- put_r();
- PRINTF("Enter Step1: no connection all pins");
- put_rn();
- quitflag = 0;
- for (; quitflag != 0xff;) {
- PRINTF("1>");
- ptr = linebuf;
- get_line(ptr, buf_size);
- put_r();
- switch(*ptr++) {
- case 's' :
- PRINTF("----- CPU CLOCK Information -----");
- put_rn();
- get_freq(1);
- PRINTF("----- CPU TYPE Information ------");
- put_rn();
- cpu_inf();
- break;
- case '?' :
- PRINTF("s - CPU system info & clock");
- put_rn();
- PRINTF("q - Return to all mode");
- put_rn();
- PRINTF("? - You know this");
- put_rn();
- break;
- case 'q' : // quit
- PRINTF("Back to all mode");
- quitflag = 0xff;
- break;
- default:
- PUTC('?');
- put_rn();
- }
- }
- put_rn();
- break;
- //---------------------------------------------------------------------------------
- // help
- //---------------------------------------------------------------------------------
- case '?' :
- put_r();
- msg_hlp();
- break;
- //---------------------------------------------------------------------------------
- // Go to special command
- //---------------------------------------------------------------------------------
- case 'x' :
- mon_hw();
- PRINTF("->Came back monitor\r\n");
- break;
- //---------------------------------------------------------------------------------
- // Go back to main()
- //---------------------------------------------------------------------------------
- case 'q' : // Quit
- PRINTF("\rReturn to main\r\n");
- //PRINTF("cannot control anymore from here\r\n");
- return;
- //---------------------------------------------------------------------------------
- // no support
- //---------------------------------------------------------------------------------
- default:
- put_r();
- PUTC('?');
- put_rn();
- break;
- }
- }
-}
-
-#endif // defined(TARGET_LPC1114)