![](/media/cache/profiles/f0fcf351df4eb6786e9bb6fc4e2dee02.jpg.50x50_q85.jpg)
Test program for FlashAir with iSDIO
Dependencies: FlashAir_iSDIO SDFileSystem
main.cpp
- Committer:
- mbed_crane_elec
- Date:
- 2019-07-16
- Revision:
- 0:0d4d83f88469
- Child:
- 1:e7d6381479e1
File content as of revision 0:0d4d83f88469:
/* FlashAir iSDIO sample * Copyright (C) 2018 by Junichi SHIBA, PIAX Inc. * * This file is a FlashAir iSDIO sample program code * Released under the BSD 2-Clause license. * http://flashair-developers.com/documents/license.html */ #include "mbed.h" #include "FlashAir_iSDIO.h" //#define USE_CONSOLE #if defined(TARGET_LPC11U24) FlashAir_iSDIO sd(p11, p12, p13, p14, "sd"); // MOSI, MISO, SCLK, SSEL #elif defined(TARGET_LPC1114) FlashAir_iSDIO sd(p11, p12, p13, p14, "sd"); // MOSI, MISO, SCLK, SSEL #elif defined(TARGET_LPC1549) FlashAir_iSDIO sd(D11, D12, D13, D10, "sd"); // MOSI, MISO, SCLK, SSEL #elif defined(TARGET_NUCLEO_L073RZ) // TOYBOARD Serial console(PA_9, PA_10); // TX, RX FlashAir_iSDIO sd(PB_15, PB_14, PB_13, PB_12, "sd", &console); // mosi(CMD), miso(DAT0), sclk(CLK), cs(DAT3) DigitalOut ledB(PB_11, 1); // B DigitalOut ledG(PB_10, 1); // G DigitalOut ledR(PA_15, 1); // R DigitalOut SD_VEN(PC_4, 0); // SD initialy off DigitalIn SD_CD(PC_1); // SD_CD #elif defined(TARGET_LPC11U35_401) // Airio-Base //#elif defined(TARGET_MCU_LPC11U35_501) Serial console(P0_19, P0_18); // TX, RX //Serial pc(USBTX, USBRX); FlashAir_iSDIO sd(P0_21, P0_22, P1_15, P0_17, "sd", &console); // mosi(CMD), miso(DAT0), sclk(CLK), cs(DAT3) DigitalOut ledB(P0_7, 1); DigitalOut ledG(P0_7, 1); DigitalOut ledR(P0_7, 1); DigitalOut SD_VEN(P1_16); DigitalIn SD_CD(P1_19); #else #error #endif //************************************************** int main() { uint32_t sequenceId ; ledG=0; ledB=0; #ifdef USE_CONSOLE console.printf("start FlashAir iSDIO sample\n"); #endif // supply power to SD card SD_VEN = 1; wait(5.0); if (SD_CD) { #ifdef USE_CONSOLE console.printf("SD: Not dected\n"); #endif } else { #ifdef USE_CONSOLE console.printf("SD: Detected\n"); #endif } // Initialize card FILE *fp = fopen("/sd/isdio.txt", "w"); fclose(fp); wait(15.0); ledG=1; ledB=1; ledR=0; // disconnect // 1. get sequenceID // 2. issue disconnect command // 3. wait response sequenceId = sd.getNextSequenceId(); sd.wlan_disconnect(sequenceId); sd.waitResponse(sequenceId); wait(5.0); ledB = 0; // establish // 1. get sequenceID // 2. issue establish command // 3. wait resoonse sequenceId = sd.getNextSequenceId(); sd.wlan_establish(sequenceId, "isdiotest", "12345678", FlashAir_iSDIO::ENCMODE_WPA2PSK_AES); wait(5.0); ledG = 0; // shared mem // 1. prepare test data // 2. write data to shared mem area // 3. read back and check #define TESTDATA 0xdeadbeaf uint32_t testdata = TESTDATA; uint8_t data[sizeof(testdata)]; memcpy(data, &testdata, sizeof(data)); sd.write_shared_mem(0x0, data, sizeof(data)); memset(data, 0x0, sizeof(data)); sd.read_shared_mem(0x0, data, sizeof(data)); ledG=1; ledB=1; ledR=1; for(;;); }