Diff: SDBlockDeviceDISCOF769NI.cpp

Revision:

0:c0eba637f7c7

diff -r 000000000000 -r c0eba637f7c7 SDBlockDeviceDISCOF769NI.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/SDBlockDeviceDISCOF769NI.cpp	Sat Apr 07 02:06:27 2018 +0000
@@ -0,0 +1,271 @@
+/* SD/MMC Block device Library for MBED-OS
+ * Copyright 2017 Roy Krikke
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+/*
+    Original Library by Roy Krikke
+    https://os.mbed.com/users/roykrikke/code/BD_SD_DISCO_F746NG/
+    https://os.mbed.com/users/roykrikke/
+
+    Modified by K.Arai / JH1PJL     April 5th, 2018
+    
+    All of following keywords are changed
+    F746NG  -> F769NI
+    32746g  -> 32f769i
+ */
+
+#include "SDBlockDeviceDISCOF769NI.h"
+#include "mbed_debug.h"
+
+/* Required version: 5.5.0 and above */
+#if defined(MBED_MAJOR_VERSION) && MBED_MAJOR_VERSION >= 5
+#if (MBED_VERSION < MBED_ENCODE_VERSION(5,5,0))
+#error "Incompatible mbed-os version detected! Required 5.5.0 and above"
+#endif
+#else
+#warning "mbed-os version 5.5.0 or above required"
+#endif
+
+/* Required version: 5.5.0 and above */
+#warning "Block device class BD_SD_DISCO_F769NI is depending on BSP_DISCO_F769NI libary (Revision 3:145e71 with date 06 Jul 2017)"
+
+#define SD_DBG 0 /*!< 1 - Enable debugging */
+
+/** Enum of standard error codes
+ *
+ *  @enum bd_sd_error
+ */
+enum bd_sd_error {
+    SD_BLOCK_DEVICE_OK = 0,             /*!< no error */
+    SD_BLOCK_DEVICE_ERROR = -5000,      /*!< device specific error */
+    //SD_BLOCK_DEVICE_ERROR_WOULD_BLOCK = -5001,  /*!< operation would block */
+    //SD_BLOCK_DEVICE_ERROR_UNSUPPORTED = -5002,  /*!< unsupported operation */
+    SD_BLOCK_DEVICE_ERROR_PARAMETER = -5003,    /*!< invalid parameter */
+    SD_BLOCK_DEVICE_ERROR_NO_INIT = -5004,      /*!< uninitialized */
+    SD_BLOCK_DEVICE_ERROR_NO_DEVICE = -5005,    /*!< device is missing or not connected */
+    //SD_BLOCK_DEVICE_ERROR_WRITE_PROTECTED = -5006,    /*!< write protected */
+    //SD_BLOCK_DEVICE_ERROR_UNUSABLE = -5007,           /*!< unusable card */
+    //SD_BLOCK_DEVICE_ERROR_NO_RESPONSE = -5008,        /*!< No response from device */
+    //SD_BLOCK_DEVICE_ERROR_CRC = -5009,                /*!< CRC error */
+    SD_BLOCK_DEVICE_ERROR_ERASE = -5010,        /*!< Erase error */
+    SD_BLOCK_DEVICE_ERROR_READ = -5011,         /*!< Read error */
+    SD_BLOCK_DEVICE_ERROR_PROGRAM = -5012,      /*!< Program error */
+};
+
+#define BLOCK_SIZE_HC 512 /*!< Block size supported for SD card is 512 bytes  */
+
+SDBlockDeviceDISCOF769NI::SDBlockDeviceDISCOF769NI() :
+    _read_size (BLOCK_SIZE_HC), _program_size (BLOCK_SIZE_HC),
+    _erase_size(BLOCK_SIZE_HC), _block_size (BLOCK_SIZE_HC),
+    _capacity_in_blocks (0)
+{
+    _timeout = 1000;
+}
+
+SDBlockDeviceDISCOF769NI::~SDBlockDeviceDISCOF769NI()
+{
+    if(_is_initialized) {
+        deinit ();
+    }
+}
+
+int SDBlockDeviceDISCOF769NI::init()
+{
+    lock();
+    _sd_state = BSP_SD_Init();
+
+    if(_sd_state != MSD_OK) {
+        if(_sd_state == MSD_ERROR_SD_NOT_PRESENT) {
+            debug_if(SD_DBG, "SD card is missing or not connected\n");
+            unlock ();
+            return SD_BLOCK_DEVICE_ERROR_NO_DEVICE;
+        } else {
+            debug_if(SD_DBG, "SD card initialization failed\n");
+            unlock();
+            return SD_BLOCK_DEVICE_ERROR_NO_INIT;
+        }
+    }
+    BSP_SD_GetCardInfo(&_current_card_info);
+
+    _card_type = _current_card_info.CardType;
+    _read_size = _current_card_info.BlockSize;
+    _program_size = _current_card_info.BlockSize;
+    _erase_size = _current_card_info.BlockSize;
+    _block_size = _current_card_info.BlockSize;
+    _capacity_in_blocks = _current_card_info.BlockNbr;
+
+    debug_if(SD_DBG, "Card Type: %i\n", _current_card_info.CardType);
+    debug_if(SD_DBG, "Card Version: %i\n", _current_card_info.CardVersion);
+    debug_if(SD_DBG, "Class: %i\n", _current_card_info.Class);
+    debug_if(SD_DBG, "Relative Card Address: %x\n", _current_card_info.RelCardAdd);
+    debug_if(SD_DBG, "Card Capacity in blocks: %i\n", _current_card_info.BlockNbr);
+    debug_if(SD_DBG, "One block size in bytes: %i\n", _current_card_info.BlockSize);
+    debug_if(SD_DBG, "Card logical Capacity in blocks: %i\n", _current_card_info.LogBlockNbr);
+    debug_if(SD_DBG, "Logical block size in bytes: %i\n", _current_card_info.LogBlockSize);
+    debug_if(SD_DBG, "Timeout: %i\n", _timeout);
+
+    _is_initialized = true;
+    unlock();
+    return SD_BLOCK_DEVICE_OK;
+}
+
+int SDBlockDeviceDISCOF769NI::deinit()
+{
+    lock();
+    _sd_state = BSP_SD_DeInit ();
+    if(_sd_state != MSD_OK) {
+        debug_if (SD_DBG, "SD card deinitialization failed\n");
+        return SD_BLOCK_DEVICE_ERROR;
+    }
+    _is_initialized = false;
+    unlock();
+    return BD_ERROR_OK;
+}
+
+int SDBlockDeviceDISCOF769NI::read(void *b, bd_addr_t addr, bd_size_t size)
+{
+    if(!is_valid_read (addr, size)) {
+        return SD_BLOCK_DEVICE_ERROR_PARAMETER;
+    }
+
+    lock();
+    if(!_is_initialized) {
+        unlock();
+        return SD_BLOCK_DEVICE_ERROR_NO_INIT;
+    }
+
+    uint32_t *buffer = static_cast<uint32_t *> (b);
+    int status = SD_BLOCK_DEVICE_OK;
+
+    // Get block address
+    uint32_t block_addr = addr / _block_size;
+    // Get block count
+    uint32_t block_cnt = size / _block_size;
+
+    debug_if(
+        SD_DBG,
+        "BD_SD_DISCO_F769NI::read addr: 0x%x, block_addr: %i size: %lu block count: %i\n",
+        addr, block_addr, size, block_cnt);
+
+    if(BSP_SD_ReadBlocks (buffer, block_addr, block_cnt, _timeout) != MSD_OK) {
+        status = SD_BLOCK_DEVICE_ERROR_READ;
+    }
+
+    // Wait until SD card is ready to use for new operation
+    while(BSP_SD_GetCardState() != SD_TRANSFER_OK) {
+    }
+
+    unlock ();
+    return status;
+}
+
+int SDBlockDeviceDISCOF769NI::program(const void *b, bd_addr_t addr, bd_size_t size)
+{
+    if(!is_valid_program (addr, size)) {
+        return SD_BLOCK_DEVICE_ERROR_PARAMETER;
+    }
+
+    lock();
+    if(!_is_initialized) {
+        unlock ();
+        return SD_BLOCK_DEVICE_ERROR_NO_INIT;
+    }
+
+    uint32_t* buffer =
+        const_cast<uint32_t*> (reinterpret_cast<const uint32_t*> (b));
+    int status = SD_BLOCK_DEVICE_OK;
+
+    // Get block address
+    uint32_t block_addr = addr / _block_size;
+    // Get block count
+    uint32_t block_cnt = size / _block_size;
+
+    debug_if (
+        SD_DBG,
+        "BD_SD_DISCO_F769NI::program addr: 0x%x, block_addr: %i size: %lu block count: %i\n",
+        addr, block_addr, size, block_cnt);
+
+    if(BSP_SD_WriteBlocks (buffer, block_addr, block_cnt, _timeout) != MSD_OK) {
+        status = SD_BLOCK_DEVICE_ERROR_PROGRAM;
+    }
+
+    // Wait until SD card is ready to use for new operation
+    while(BSP_SD_GetCardState() != SD_TRANSFER_OK) {
+    }
+
+    unlock();
+    return status;
+}
+
+int SDBlockDeviceDISCOF769NI::erase(bd_addr_t addr, bd_size_t size)
+{
+    if (!is_valid_erase(addr, size)) {
+        return SD_BLOCK_DEVICE_ERROR_PARAMETER;
+    }
+
+    lock();
+    if(!_is_initialized) {
+        unlock();
+        return SD_BLOCK_DEVICE_ERROR_NO_INIT;
+    }
+
+    size -= _block_size;
+
+    int status = SD_BLOCK_DEVICE_OK;
+    uint32_t start_addr = addr;
+    uint32_t end_addr = start_addr + size;
+
+    // Get block count
+    uint32_t block_start_addr = start_addr / _block_size;
+    // Get block address
+    uint32_t block_end_addr = end_addr / _block_size;
+
+    debug_if(
+        SD_DBG,
+        "BD_SD_DISCO_F769NI::erase start_addr: 0x%x, block_start_addr: %i | end_addr: 0x%x, block_end_addr: %i size: %lu\n",
+        start_addr, block_start_addr, end_addr, block_end_addr, size);
+
+    if(BSP_SD_Erase (block_start_addr, block_end_addr) != MSD_OK) {
+        status = SD_BLOCK_DEVICE_ERROR_ERASE;
+    }
+
+    /* Wait until SD card is ready to use for new operation */
+    while(BSP_SD_GetCardState() != SD_TRANSFER_OK) {
+    }
+
+    unlock();
+    return status;
+}
+
+bd_size_t SDBlockDeviceDISCOF769NI::get_read_size() const
+{
+    return _read_size;
+}
+
+bd_size_t SDBlockDeviceDISCOF769NI::get_program_size() const
+{
+    return _program_size;
+}
+
+bd_size_t SDBlockDeviceDISCOF769NI::get_erase_size() const
+{
+    return _erase_size;
+}
+
+bd_size_t SDBlockDeviceDISCOF769NI::size() const
+{
+    return (_block_size * _capacity_in_blocks);
+}
+