![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Our version of TFC code.
Fork of FRDM-TFC by
TFC.cpp@7:b34924a05d60, 2014-04-20 (annotated)
- Committer:
- redxeth
- Date:
- Sun Apr 20 00:14:53 2014 +0000
- Revision:
- 7:b34924a05d60
- Parent:
- 3:23cce037011f
- Child:
- 8:4e9ce846f7c3
Updated SERVO_DEFAULT_PERIOD to be faster (10mS from 20mS) to permit racing.; ; Increase Clock period to compensate so integration time not impacted (from 100 cycles to 200 cycles)
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
emh203 | 1:6f37253dab87 | 1 | #include "mbed.h" |
emh203 | 1:6f37253dab87 | 2 | #include "TFC.h" |
emh203 | 1:6f37253dab87 | 3 | |
redxeth | 7:b34924a05d60 | 4 | #define FTM1_CLK_PRESCALE 6 // Prescale Selector value - see comments in Status Control (SC) section for more details |
redxeth | 7:b34924a05d60 | 5 | #define SERVO_DEFAULT_PERIOD (float)(.010) // Desired Frequency of PWM Signal - Here 50Hz => 20ms period |
redxeth | 7:b34924a05d60 | 6 | #define TAOS_CLK_COUNT 200 // Number of cycles for CLK Signal on camera |
redxeth | 7:b34924a05d60 | 7 | |
emh203 | 1:6f37253dab87 | 8 | // use these to dial in servo steering to your particular servo |
emh203 | 1:6f37253dab87 | 9 | #define SERVO_MIN_PULSE_WIDTH_DEFAULT (float)(.0005) // The number here should be be *pulse width* in seconds to move servo to its left limit |
redxeth | 7:b34924a05d60 | 10 | #define SERVO_MAX_PULSE_WIDTH_DEFAULT (float)(.002) // The number here should be be *pulse width* in seconds to move servo to its left limit |
emh203 | 1:6f37253dab87 | 11 | |
emh203 | 1:6f37253dab87 | 12 | |
emh203 | 1:6f37253dab87 | 13 | #define FTM0_CLOCK (SystemCoreClock/2) |
emh203 | 1:6f37253dab87 | 14 | #define FTM0_CLK_PRESCALE (0) // Prescale Selector value - see comments in Status Control (SC) section for more details |
emh203 | 1:6f37253dab87 | 15 | #define FTM0_DEFAULT_SWITCHING_FREQUENCY (4000.0) |
emh203 | 1:6f37253dab87 | 16 | |
emh203 | 1:6f37253dab87 | 17 | #define ADC_MAX_CODE (4095) |
emh203 | 1:6f37253dab87 | 18 | |
emh203 | 1:6f37253dab87 | 19 | #define TAOS_CLK_HIGH PTE->PSOR = (1<<1) |
emh203 | 1:6f37253dab87 | 20 | #define TAOS_CLK_LOW PTE->PCOR = (1<<1) |
emh203 | 1:6f37253dab87 | 21 | #define TAOS_SI_HIGH PTD->PSOR = (1<<7) |
emh203 | 1:6f37253dab87 | 22 | #define TAOS_SI_LOW PTD->PCOR = (1<<7) |
emh203 | 1:6f37253dab87 | 23 | |
emh203 | 1:6f37253dab87 | 24 | #define ADC_STATE_INIT 0 |
emh203 | 1:6f37253dab87 | 25 | #define ADC_STATE_CAPTURE_POT_0 1 |
emh203 | 1:6f37253dab87 | 26 | #define ADC_STATE_CAPTURE_POT_1 2 |
emh203 | 1:6f37253dab87 | 27 | #define ADC_STATE_CAPTURE_BATTERY_LEVEL 3 |
emh203 | 1:6f37253dab87 | 28 | #define ADC_STATE_CAPTURE_LINE_SCAN 4 |
emh203 | 1:6f37253dab87 | 29 | |
emh203 | 1:6f37253dab87 | 30 | |
emh203 | 1:6f37253dab87 | 31 | #define TFC_POT_0_ADC_CHANNEL 13 |
emh203 | 1:6f37253dab87 | 32 | #define TFC_POT_1_ADC_CHANNEL 12 |
emh203 | 1:6f37253dab87 | 33 | #define TFC_BAT_SENSE_CHANNEL 4 |
emh203 | 1:6f37253dab87 | 34 | #define TFC_LINESCAN0_ADC_CHANNEL 6 |
emh203 | 1:6f37253dab87 | 35 | #define TFC_LINESCAN1_ADC_CHANNEL 7 |
emh203 | 1:6f37253dab87 | 36 | |
emh203 | 1:6f37253dab87 | 37 | |
emh203 | 1:6f37253dab87 | 38 | #define ADC0_irq_no 57 |
emh203 | 1:6f37253dab87 | 39 | #define ADC1_irq_no 58 |
emh203 | 1:6f37253dab87 | 40 | |
emh203 | 1:6f37253dab87 | 41 | #define ADC0_CHANA 19 // set to desired ADC0 channel trigger A |
emh203 | 1:6f37253dab87 | 42 | #define ADC0_CHANB 20 // set to desired ADC0 channel trigger B |
emh203 | 1:6f37253dab87 | 43 | |
emh203 | 1:6f37253dab87 | 44 | #define ADC1_CHANA 20 // set to desired ADC1 channel trigger A 20 defaults to potentiometer in TWRK60 |
emh203 | 1:6f37253dab87 | 45 | #define ADC1_CHANB 20 // set to desired ADC1 channel trigger B |
emh203 | 1:6f37253dab87 | 46 | |
emh203 | 1:6f37253dab87 | 47 | #define ADC0_DLYA 0x2000 // ADC0 trigger A delay |
emh203 | 1:6f37253dab87 | 48 | #define ADC0_DLYB 0x4000 // ADC0 trigger B delay |
emh203 | 1:6f37253dab87 | 49 | #define ADC1_DLYA 0x6000 // ADC1 trigger A delay |
emh203 | 1:6f37253dab87 | 50 | #define ADC1_DLYB 0x7fff // ADC1 trigger B delay |
emh203 | 1:6f37253dab87 | 51 | |
emh203 | 1:6f37253dab87 | 52 | |
emh203 | 1:6f37253dab87 | 53 | #define ADC0A_DONE 0x01 |
emh203 | 1:6f37253dab87 | 54 | #define ADC0B_DONE 0x02 |
emh203 | 1:6f37253dab87 | 55 | #define ADC1A_DONE 0x04 |
emh203 | 1:6f37253dab87 | 56 | #define ADC1B_DONE 0x08 |
emh203 | 1:6f37253dab87 | 57 | |
emh203 | 1:6f37253dab87 | 58 | |
emh203 | 1:6f37253dab87 | 59 | // Bit shifting of bitfiled is already taken into account so |
emh203 | 1:6f37253dab87 | 60 | // bitfiled values are always represented as relative to their position. |
emh203 | 1:6f37253dab87 | 61 | |
emh203 | 1:6f37253dab87 | 62 | /************************* #Defines ******************************************/ |
emh203 | 1:6f37253dab87 | 63 | |
emh203 | 1:6f37253dab87 | 64 | #define A 0x0 |
emh203 | 1:6f37253dab87 | 65 | #define B 0x1 |
emh203 | 1:6f37253dab87 | 66 | |
emh203 | 1:6f37253dab87 | 67 | /////// NOTE: the following defines relate to the ADC register definitions |
emh203 | 1:6f37253dab87 | 68 | /////// and the content follows the reference manual, using the same symbols. |
emh203 | 1:6f37253dab87 | 69 | |
emh203 | 1:6f37253dab87 | 70 | |
emh203 | 1:6f37253dab87 | 71 | //// ADCSC1 (register) |
emh203 | 1:6f37253dab87 | 72 | |
emh203 | 1:6f37253dab87 | 73 | // Conversion Complete (COCO) mask |
emh203 | 1:6f37253dab87 | 74 | #define COCO_COMPLETE ADC_SC1_COCO_MASK |
emh203 | 1:6f37253dab87 | 75 | #define COCO_NOT 0x00 |
emh203 | 1:6f37253dab87 | 76 | |
emh203 | 1:6f37253dab87 | 77 | // ADC interrupts: enabled, or disabled. |
emh203 | 1:6f37253dab87 | 78 | #define AIEN_ON ADC_SC1_AIEN_MASK |
emh203 | 1:6f37253dab87 | 79 | #define AIEN_OFF 0x00 |
emh203 | 1:6f37253dab87 | 80 | |
emh203 | 1:6f37253dab87 | 81 | // Differential or Single ended ADC input |
emh203 | 1:6f37253dab87 | 82 | #define DIFF_SINGLE 0x00 |
emh203 | 1:6f37253dab87 | 83 | #define DIFF_DIFFERENTIAL ADC_SC1_DIFF_MASK |
emh203 | 1:6f37253dab87 | 84 | |
emh203 | 1:6f37253dab87 | 85 | //// ADCCFG1 |
emh203 | 1:6f37253dab87 | 86 | |
emh203 | 1:6f37253dab87 | 87 | // Power setting of ADC |
emh203 | 1:6f37253dab87 | 88 | #define ADLPC_LOW ADC_CFG1_ADLPC_MASK |
emh203 | 1:6f37253dab87 | 89 | #define ADLPC_NORMAL 0x00 |
emh203 | 1:6f37253dab87 | 90 | |
emh203 | 1:6f37253dab87 | 91 | // Clock divisor |
emh203 | 1:6f37253dab87 | 92 | #define ADIV_1 0x00 |
emh203 | 1:6f37253dab87 | 93 | #define ADIV_2 0x01 |
emh203 | 1:6f37253dab87 | 94 | #define ADIV_4 0x02 |
emh203 | 1:6f37253dab87 | 95 | #define ADIV_8 0x03 |
emh203 | 1:6f37253dab87 | 96 | |
emh203 | 1:6f37253dab87 | 97 | // Long samle time, or Short sample time |
emh203 | 1:6f37253dab87 | 98 | #define ADLSMP_LONG ADC_CFG1_ADLSMP_MASK |
emh203 | 1:6f37253dab87 | 99 | #define ADLSMP_SHORT 0x00 |
emh203 | 1:6f37253dab87 | 100 | |
emh203 | 1:6f37253dab87 | 101 | // How many bits for the conversion? 8, 12, 10, or 16 (single ended). |
emh203 | 1:6f37253dab87 | 102 | #define MODE_8 0x00 |
emh203 | 1:6f37253dab87 | 103 | #define MODE_12 0x01 |
emh203 | 1:6f37253dab87 | 104 | #define MODE_10 0x02 |
emh203 | 1:6f37253dab87 | 105 | #define MODE_16 0x03 |
emh203 | 1:6f37253dab87 | 106 | |
emh203 | 1:6f37253dab87 | 107 | |
emh203 | 1:6f37253dab87 | 108 | |
emh203 | 1:6f37253dab87 | 109 | // ADC Input Clock Source choice? Bus clock, Bus clock/2, "altclk", or the |
emh203 | 1:6f37253dab87 | 110 | // ADC's own asynchronous clock for less noise |
emh203 | 1:6f37253dab87 | 111 | #define ADICLK_BUS 0x00 |
emh203 | 1:6f37253dab87 | 112 | #define ADICLK_BUS_2 0x01 |
emh203 | 1:6f37253dab87 | 113 | #define ADICLK_ALTCLK 0x02 |
emh203 | 1:6f37253dab87 | 114 | #define ADICLK_ADACK 0x03 |
emh203 | 1:6f37253dab87 | 115 | |
emh203 | 1:6f37253dab87 | 116 | //// ADCCFG2 |
emh203 | 1:6f37253dab87 | 117 | |
emh203 | 1:6f37253dab87 | 118 | // Select between B or A channels |
emh203 | 1:6f37253dab87 | 119 | #define MUXSEL_ADCB ADC_CFG2_MUXSEL_MASK |
emh203 | 1:6f37253dab87 | 120 | #define MUXSEL_ADCA 0x00 |
emh203 | 1:6f37253dab87 | 121 | |
emh203 | 1:6f37253dab87 | 122 | // Ansync clock output enable: enable, or disable the output of it |
emh203 | 1:6f37253dab87 | 123 | #define ADACKEN_ENABLED ADC_CFG2_ADACKEN_MASK |
emh203 | 1:6f37253dab87 | 124 | #define ADACKEN_DISABLED 0x00 |
emh203 | 1:6f37253dab87 | 125 | |
emh203 | 1:6f37253dab87 | 126 | // High speed or low speed conversion mode |
emh203 | 1:6f37253dab87 | 127 | #define ADHSC_HISPEED ADC_CFG2_ADHSC_MASK |
emh203 | 1:6f37253dab87 | 128 | #define ADHSC_NORMAL 0x00 |
emh203 | 1:6f37253dab87 | 129 | |
emh203 | 1:6f37253dab87 | 130 | // Long Sample Time selector: 20, 12, 6, or 2 extra clocks for a longer sample time |
emh203 | 1:6f37253dab87 | 131 | #define ADLSTS_20 0x00 |
emh203 | 1:6f37253dab87 | 132 | #define ADLSTS_12 0x01 |
emh203 | 1:6f37253dab87 | 133 | #define ADLSTS_6 0x02 |
emh203 | 1:6f37253dab87 | 134 | #define ADLSTS_2 0x03 |
emh203 | 1:6f37253dab87 | 135 | |
emh203 | 1:6f37253dab87 | 136 | ////ADCSC2 |
emh203 | 1:6f37253dab87 | 137 | |
emh203 | 1:6f37253dab87 | 138 | // Read-only status bit indicating conversion status |
emh203 | 1:6f37253dab87 | 139 | #define ADACT_ACTIVE ADC_SC2_ADACT_MASK |
emh203 | 1:6f37253dab87 | 140 | #define ADACT_INACTIVE 0x00 |
emh203 | 1:6f37253dab87 | 141 | |
emh203 | 1:6f37253dab87 | 142 | // Trigger for starting conversion: Hardware trigger, or software trigger. |
emh203 | 1:6f37253dab87 | 143 | // For using PDB, the Hardware trigger option is selected. |
emh203 | 1:6f37253dab87 | 144 | #define ADTRG_HW ADC_SC2_ADTRG_MASK |
emh203 | 1:6f37253dab87 | 145 | #define ADTRG_SW 0x00 |
emh203 | 1:6f37253dab87 | 146 | |
emh203 | 1:6f37253dab87 | 147 | // ADC Compare Function Enable: Disabled, or Enabled. |
emh203 | 1:6f37253dab87 | 148 | #define ACFE_DISABLED 0x00 |
emh203 | 1:6f37253dab87 | 149 | #define ACFE_ENABLED ADC_SC2_ACFE_MASK |
emh203 | 1:6f37253dab87 | 150 | |
emh203 | 1:6f37253dab87 | 151 | // Compare Function Greater Than Enable: Greater, or Less. |
emh203 | 1:6f37253dab87 | 152 | #define ACFGT_GREATER ADC_SC2_ACFGT_MASK |
emh203 | 1:6f37253dab87 | 153 | #define ACFGT_LESS 0x00 |
emh203 | 1:6f37253dab87 | 154 | |
emh203 | 1:6f37253dab87 | 155 | // Compare Function Range Enable: Enabled or Disabled. |
emh203 | 1:6f37253dab87 | 156 | #define ACREN_ENABLED ADC_SC2_ACREN_MASK |
emh203 | 1:6f37253dab87 | 157 | #define ACREN_DISABLED 0x00 |
emh203 | 1:6f37253dab87 | 158 | |
emh203 | 1:6f37253dab87 | 159 | // DMA enable: enabled or disabled. |
emh203 | 1:6f37253dab87 | 160 | #define DMAEN_ENABLED ADC_SC2_DMAEN_MASK |
emh203 | 1:6f37253dab87 | 161 | #define DMAEN_DISABLED 0x00 |
emh203 | 1:6f37253dab87 | 162 | |
emh203 | 1:6f37253dab87 | 163 | // Voltage Reference selection for the ADC conversions |
emh203 | 1:6f37253dab87 | 164 | // (***not*** the PGA which uses VREFO only). |
emh203 | 1:6f37253dab87 | 165 | // VREFH and VREFL (0) , or VREFO (1). |
emh203 | 1:6f37253dab87 | 166 | |
emh203 | 1:6f37253dab87 | 167 | #define REFSEL_EXT 0x00 |
emh203 | 1:6f37253dab87 | 168 | #define REFSEL_ALT 0x01 |
emh203 | 1:6f37253dab87 | 169 | #define REFSEL_RES 0x02 /* reserved */ |
emh203 | 1:6f37253dab87 | 170 | #define REFSEL_RES_EXT 0x03 /* reserved but defaults to Vref */ |
emh203 | 1:6f37253dab87 | 171 | |
emh203 | 1:6f37253dab87 | 172 | ////ADCSC3 |
emh203 | 1:6f37253dab87 | 173 | |
emh203 | 1:6f37253dab87 | 174 | // Calibration begin or off |
emh203 | 1:6f37253dab87 | 175 | #define CAL_BEGIN ADC_SC3_CAL_MASK |
emh203 | 1:6f37253dab87 | 176 | #define CAL_OFF 0x00 |
emh203 | 1:6f37253dab87 | 177 | |
emh203 | 1:6f37253dab87 | 178 | // Status indicating Calibration failed, or normal success |
emh203 | 1:6f37253dab87 | 179 | #define CALF_FAIL ADC_SC3_CALF_MASK |
emh203 | 1:6f37253dab87 | 180 | #define CALF_NORMAL 0x00 |
emh203 | 1:6f37253dab87 | 181 | |
emh203 | 1:6f37253dab87 | 182 | // ADC to continously convert, or do a sinle conversion |
emh203 | 1:6f37253dab87 | 183 | #define ADCO_CONTINUOUS ADC_SC3_ADCO_MASK |
emh203 | 1:6f37253dab87 | 184 | #define ADCO_SINGLE 0x00 |
emh203 | 1:6f37253dab87 | 185 | |
emh203 | 1:6f37253dab87 | 186 | // Averaging enabled in the ADC, or not. |
emh203 | 1:6f37253dab87 | 187 | #define AVGE_ENABLED ADC_SC3_AVGE_MASK |
emh203 | 1:6f37253dab87 | 188 | #define AVGE_DISABLED 0x00 |
emh203 | 1:6f37253dab87 | 189 | |
emh203 | 1:6f37253dab87 | 190 | // How many to average prior to "interrupting" the MCU? 4, 8, 16, or 32 |
emh203 | 1:6f37253dab87 | 191 | #define AVGS_4 0x00 |
emh203 | 1:6f37253dab87 | 192 | #define AVGS_8 0x01 |
emh203 | 1:6f37253dab87 | 193 | #define AVGS_16 0x02 |
emh203 | 1:6f37253dab87 | 194 | #define AVGS_32 0x03 |
emh203 | 1:6f37253dab87 | 195 | |
emh203 | 1:6f37253dab87 | 196 | ////PGA |
emh203 | 1:6f37253dab87 | 197 | |
emh203 | 1:6f37253dab87 | 198 | // PGA enabled or not? |
emh203 | 1:6f37253dab87 | 199 | #define PGAEN_ENABLED ADC_PGA_PGAEN_MASK |
emh203 | 1:6f37253dab87 | 200 | #define PGAEN_DISABLED 0x00 |
emh203 | 1:6f37253dab87 | 201 | |
emh203 | 1:6f37253dab87 | 202 | // Chopper stabilization of the amplifier, or not. |
emh203 | 1:6f37253dab87 | 203 | #define PGACHP_CHOP ADC_PGA_PGACHP_MASK |
emh203 | 1:6f37253dab87 | 204 | #define PGACHP_NOCHOP 0x00 |
emh203 | 1:6f37253dab87 | 205 | |
emh203 | 1:6f37253dab87 | 206 | // PGA in low power mode, or normal mode. |
emh203 | 1:6f37253dab87 | 207 | #define PGALP_LOW ADC_PGA_PGALP_MASK |
emh203 | 1:6f37253dab87 | 208 | #define PGALP_NORMAL 0x00 |
emh203 | 1:6f37253dab87 | 209 | |
emh203 | 1:6f37253dab87 | 210 | // Gain of PGA. Selectable from 1 to 64. |
emh203 | 1:6f37253dab87 | 211 | #define PGAG_1 0x00 |
emh203 | 1:6f37253dab87 | 212 | #define PGAG_2 0x01 |
emh203 | 1:6f37253dab87 | 213 | #define PGAG_4 0x02 |
emh203 | 1:6f37253dab87 | 214 | #define PGAG_8 0x03 |
emh203 | 1:6f37253dab87 | 215 | #define PGAG_16 0x04 |
emh203 | 1:6f37253dab87 | 216 | #define PGAG_32 0x05 |
emh203 | 1:6f37253dab87 | 217 | #define PGAG_64 0x06 |
emh203 | 1:6f37253dab87 | 218 | |
emh203 | 1:6f37253dab87 | 219 | |
emh203 | 1:6f37253dab87 | 220 | #define ADC_STATE_INIT 0 |
emh203 | 1:6f37253dab87 | 221 | #define ADC_STATE_CAPTURE_POT_0 1 |
emh203 | 1:6f37253dab87 | 222 | #define ADC_STATE_CAPTURE_POT_1 2 |
emh203 | 1:6f37253dab87 | 223 | #define ADC_STATE_CAPTURE_BATTERY_LEVEL 3 |
emh203 | 1:6f37253dab87 | 224 | #define ADC_STATE_CAPTURE_LINE_SCAN 4 |
emh203 | 1:6f37253dab87 | 225 | |
emh203 | 1:6f37253dab87 | 226 | |
emh203 | 1:6f37253dab87 | 227 | /////////// The above values fit into the structure below to select ADC/PGA |
emh203 | 1:6f37253dab87 | 228 | /////////// configuration desired: |
emh203 | 1:6f37253dab87 | 229 | |
emh203 | 1:6f37253dab87 | 230 | typedef struct adc_cfg { |
emh203 | 1:6f37253dab87 | 231 | uint8_t CONFIG1; |
emh203 | 1:6f37253dab87 | 232 | uint8_t CONFIG2; |
emh203 | 1:6f37253dab87 | 233 | uint16_t COMPARE1; |
emh203 | 1:6f37253dab87 | 234 | uint16_t COMPARE2; |
emh203 | 1:6f37253dab87 | 235 | uint8_t STATUS2; |
emh203 | 1:6f37253dab87 | 236 | uint8_t STATUS3; |
emh203 | 1:6f37253dab87 | 237 | uint8_t STATUS1A; |
emh203 | 1:6f37253dab87 | 238 | uint8_t STATUS1B; |
emh203 | 1:6f37253dab87 | 239 | uint32_t PGA; |
emh203 | 1:6f37253dab87 | 240 | } *tADC_ConfigPtr, tADC_Config ; |
emh203 | 1:6f37253dab87 | 241 | |
emh203 | 1:6f37253dab87 | 242 | |
emh203 | 1:6f37253dab87 | 243 | #define CAL_BLK_NUMREC 18 |
emh203 | 1:6f37253dab87 | 244 | |
emh203 | 1:6f37253dab87 | 245 | typedef struct adc_cal { |
emh203 | 1:6f37253dab87 | 246 | |
emh203 | 1:6f37253dab87 | 247 | uint16_t OFS; |
emh203 | 1:6f37253dab87 | 248 | uint16_t PG; |
emh203 | 1:6f37253dab87 | 249 | uint16_t MG; |
emh203 | 1:6f37253dab87 | 250 | uint8_t CLPD; |
emh203 | 1:6f37253dab87 | 251 | uint8_t CLPS; |
emh203 | 1:6f37253dab87 | 252 | uint16_t CLP4; |
emh203 | 1:6f37253dab87 | 253 | uint16_t CLP3; |
emh203 | 1:6f37253dab87 | 254 | uint8_t CLP2; |
emh203 | 1:6f37253dab87 | 255 | uint8_t CLP1; |
emh203 | 1:6f37253dab87 | 256 | uint8_t CLP0; |
emh203 | 1:6f37253dab87 | 257 | uint8_t dummy; |
emh203 | 1:6f37253dab87 | 258 | uint8_t CLMD; |
emh203 | 1:6f37253dab87 | 259 | uint8_t CLMS; |
emh203 | 1:6f37253dab87 | 260 | uint16_t CLM4; |
emh203 | 1:6f37253dab87 | 261 | uint16_t CLM3; |
emh203 | 1:6f37253dab87 | 262 | uint8_t CLM2; |
emh203 | 1:6f37253dab87 | 263 | uint8_t CLM1; |
emh203 | 1:6f37253dab87 | 264 | uint8_t CLM0; |
emh203 | 1:6f37253dab87 | 265 | } tADC_Cal_Blk ; |
emh203 | 1:6f37253dab87 | 266 | |
emh203 | 1:6f37253dab87 | 267 | typedef struct ADC_MemMap { |
emh203 | 1:6f37253dab87 | 268 | uint32_t SC1[2]; /**< ADC Status and Control Registers 1, array offset: 0x0, array step: 0x4 */ |
emh203 | 1:6f37253dab87 | 269 | uint32_t CFG1; /**< ADC Configuration Register 1, offset: 0x8 */ |
emh203 | 1:6f37253dab87 | 270 | uint32_t CFG2; /**< ADC Configuration Register 2, offset: 0xC */ |
emh203 | 1:6f37253dab87 | 271 | uint32_t R[2]; /**< ADC Data Result Register, array offset: 0x10, array step: 0x4 */ |
emh203 | 1:6f37253dab87 | 272 | uint32_t CV1; /**< Compare Value Registers, offset: 0x18 */ |
emh203 | 1:6f37253dab87 | 273 | uint32_t CV2; /**< Compare Value Registers, offset: 0x1C */ |
emh203 | 1:6f37253dab87 | 274 | uint32_t SC2; /**< Status and Control Register 2, offset: 0x20 */ |
emh203 | 1:6f37253dab87 | 275 | uint32_t SC3; /**< Status and Control Register 3, offset: 0x24 */ |
emh203 | 1:6f37253dab87 | 276 | uint32_t OFS; /**< ADC Offset Correction Register, offset: 0x28 */ |
emh203 | 1:6f37253dab87 | 277 | uint32_t PG; /**< ADC Plus-Side Gain Register, offset: 0x2C */ |
emh203 | 1:6f37253dab87 | 278 | uint32_t MG; /**< ADC Minus-Side Gain Register, offset: 0x30 */ |
emh203 | 1:6f37253dab87 | 279 | uint32_t CLPD; /**< ADC Plus-Side General Calibration Value Register, offset: 0x34 */ |
emh203 | 1:6f37253dab87 | 280 | uint32_t CLPS; /**< ADC Plus-Side General Calibration Value Register, offset: 0x38 */ |
emh203 | 1:6f37253dab87 | 281 | uint32_t CLP4; /**< ADC Plus-Side General Calibration Value Register, offset: 0x3C */ |
emh203 | 1:6f37253dab87 | 282 | uint32_t CLP3; /**< ADC Plus-Side General Calibration Value Register, offset: 0x40 */ |
emh203 | 1:6f37253dab87 | 283 | uint32_t CLP2; /**< ADC Plus-Side General Calibration Value Register, offset: 0x44 */ |
emh203 | 1:6f37253dab87 | 284 | uint32_t CLP1; /**< ADC Plus-Side General Calibration Value Register, offset: 0x48 */ |
emh203 | 1:6f37253dab87 | 285 | uint32_t CLP0; /**< ADC Plus-Side General Calibration Value Register, offset: 0x4C */ |
emh203 | 1:6f37253dab87 | 286 | uint8_t RESERVED_0[4]; |
emh203 | 1:6f37253dab87 | 287 | uint32_t CLMD; /**< ADC Minus-Side General Calibration Value Register, offset: 0x54 */ |
emh203 | 1:6f37253dab87 | 288 | uint32_t CLMS; /**< ADC Minus-Side General Calibration Value Register, offset: 0x58 */ |
emh203 | 1:6f37253dab87 | 289 | uint32_t CLM4; /**< ADC Minus-Side General Calibration Value Register, offset: 0x5C */ |
emh203 | 1:6f37253dab87 | 290 | uint32_t CLM3; /**< ADC Minus-Side General Calibration Value Register, offset: 0x60 */ |
emh203 | 1:6f37253dab87 | 291 | uint32_t CLM2; /**< ADC Minus-Side General Calibration Value Register, offset: 0x64 */ |
emh203 | 1:6f37253dab87 | 292 | uint32_t CLM1; /**< ADC Minus-Side General Calibration Value Register, offset: 0x68 */ |
emh203 | 1:6f37253dab87 | 293 | uint32_t CLM0; /**< ADC Minus-Side General Calibration Value Register, offset: 0x6C */ |
emh203 | 1:6f37253dab87 | 294 | } volatile *ADC_MemMapPtr; |
emh203 | 1:6f37253dab87 | 295 | |
emh203 | 1:6f37253dab87 | 296 | |
emh203 | 1:6f37253dab87 | 297 | |
emh203 | 1:6f37253dab87 | 298 | /* ADC - Register accessors */ |
emh203 | 1:6f37253dab87 | 299 | #define ADC_SC1_REG(base,index) ((base)->SC1[index]) |
emh203 | 1:6f37253dab87 | 300 | #define ADC_CFG1_REG(base) ((base)->CFG1) |
emh203 | 1:6f37253dab87 | 301 | #define ADC_CFG2_REG(base) ((base)->CFG2) |
emh203 | 1:6f37253dab87 | 302 | #define ADC_R_REG(base,index) ((base)->R[index]) |
emh203 | 1:6f37253dab87 | 303 | #define ADC_CV1_REG(base) ((base)->CV1) |
emh203 | 1:6f37253dab87 | 304 | #define ADC_CV2_REG(base) ((base)->CV2) |
emh203 | 1:6f37253dab87 | 305 | #define ADC_SC2_REG(base) ((base)->SC2) |
emh203 | 1:6f37253dab87 | 306 | #define ADC_SC3_REG(base) ((base)->SC3) |
emh203 | 1:6f37253dab87 | 307 | #define ADC_OFS_REG(base) ((base)->OFS) |
emh203 | 1:6f37253dab87 | 308 | #define ADC_PG_REG(base) ((base)->PG) |
emh203 | 1:6f37253dab87 | 309 | #define ADC_MG_REG(base) ((base)->MG) |
emh203 | 1:6f37253dab87 | 310 | #define ADC_CLPD_REG(base) ((base)->CLPD) |
emh203 | 1:6f37253dab87 | 311 | #define ADC_CLPS_REG(base) ((base)->CLPS) |
emh203 | 1:6f37253dab87 | 312 | #define ADC_CLP4_REG(base) ((base)->CLP4) |
emh203 | 1:6f37253dab87 | 313 | #define ADC_CLP3_REG(base) ((base)->CLP3) |
emh203 | 1:6f37253dab87 | 314 | #define ADC_CLP2_REG(base) ((base)->CLP2) |
emh203 | 1:6f37253dab87 | 315 | #define ADC_CLP1_REG(base) ((base)->CLP1) |
emh203 | 1:6f37253dab87 | 316 | #define ADC_CLP0_REG(base) ((base)->CLP0) |
emh203 | 1:6f37253dab87 | 317 | #define ADC_CLMD_REG(base) ((base)->CLMD) |
emh203 | 1:6f37253dab87 | 318 | #define ADC_CLMS_REG(base) ((base)->CLMS) |
emh203 | 1:6f37253dab87 | 319 | #define ADC_CLM4_REG(base) ((base)->CLM4) |
emh203 | 1:6f37253dab87 | 320 | #define ADC_CLM3_REG(base) ((base)->CLM3) |
emh203 | 1:6f37253dab87 | 321 | #define ADC_CLM2_REG(base) ((base)->CLM2) |
emh203 | 1:6f37253dab87 | 322 | #define ADC_CLM1_REG(base) ((base)->CLM1) |
emh203 | 1:6f37253dab87 | 323 | #define ADC_CLM0_REG(base) ((base)->CLM0) |
emh203 | 1:6f37253dab87 | 324 | |
emh203 | 1:6f37253dab87 | 325 | #define ADC0_BASE_PTR ((ADC_MemMapPtr)0x4003B000u) |
emh203 | 1:6f37253dab87 | 326 | /** Array initializer of ADC peripheral base pointers */ |
emh203 | 1:6f37253dab87 | 327 | #define ADC_BASE_PTRS { ADC0_BASE_PTR } |
emh203 | 1:6f37253dab87 | 328 | |
emh203 | 1:6f37253dab87 | 329 | |
emh203 | 1:6f37253dab87 | 330 | float _ServoDutyCycleMin; |
emh203 | 1:6f37253dab87 | 331 | float _ServoDutyCycleMax; |
emh203 | 1:6f37253dab87 | 332 | float _ServoPeriod; |
emh203 | 1:6f37253dab87 | 333 | |
emh203 | 1:6f37253dab87 | 334 | volatile uint16_t QueuedServo0Val; |
emh203 | 1:6f37253dab87 | 335 | volatile uint16_t QueuedServo1Val; |
emh203 | 1:6f37253dab87 | 336 | |
emh203 | 1:6f37253dab87 | 337 | volatile uint16_t *LineScanImage0WorkingBuffer; |
emh203 | 1:6f37253dab87 | 338 | volatile uint16_t *LineScanImage1WorkingBuffer; |
emh203 | 1:6f37253dab87 | 339 | |
emh203 | 1:6f37253dab87 | 340 | volatile uint16_t LineScanImage0Buffer[2][128]; |
emh203 | 1:6f37253dab87 | 341 | volatile uint16_t LineScanImage1Buffer[2][128]; |
emh203 | 1:6f37253dab87 | 342 | volatile uint8_t LineScanWorkingBuffer; |
emh203 | 1:6f37253dab87 | 343 | |
emh203 | 3:23cce037011f | 344 | volatile uint16_t * TFC_LineScanImage0; |
emh203 | 3:23cce037011f | 345 | volatile uint16_t * TFC_LineScanImage1; |
emh203 | 3:23cce037011f | 346 | volatile uint8_t TFC_LineScanImageReady; |
emh203 | 3:23cce037011f | 347 | |
emh203 | 1:6f37253dab87 | 348 | volatile uint16_t PotADC_Value[2]; |
emh203 | 1:6f37253dab87 | 349 | volatile uint16_t BatSenseADC_Value; |
emh203 | 1:6f37253dab87 | 350 | volatile uint16_t CurrentADC_State; |
emh203 | 1:6f37253dab87 | 351 | volatile uint8_t CurrentLineScanPixel; |
emh203 | 1:6f37253dab87 | 352 | volatile uint8_t CurrentLineScanChannel; |
emh203 | 1:6f37253dab87 | 353 | volatile uint32_t TFC_ServoTicker; |
emh203 | 3:23cce037011f | 354 | |
emh203 | 1:6f37253dab87 | 355 | |
emh203 | 1:6f37253dab87 | 356 | void TFC_SetServoDutyCycle(uint8_t ServoNumber, float DutyCycle); |
emh203 | 1:6f37253dab87 | 357 | void TFC_InitLineScanCamera(); |
emh203 | 1:6f37253dab87 | 358 | uint8_t ADC_Cal(ADC_MemMapPtr adcmap); |
emh203 | 1:6f37253dab87 | 359 | void ADC_Config_Alt(ADC_MemMapPtr adcmap, tADC_ConfigPtr ADC_CfgPtr); |
emh203 | 1:6f37253dab87 | 360 | void ADC_Read_Cal(ADC_MemMapPtr adcmap, tADC_Cal_Blk *blk); |
emh203 | 1:6f37253dab87 | 361 | void TFC_InitADC0(); |
emh203 | 1:6f37253dab87 | 362 | void TFC_InitADC_System(); |
emh203 | 1:6f37253dab87 | 363 | void TFC_GPIO_Init(); |
emh203 | 1:6f37253dab87 | 364 | void ADC0_Handler(); |
emh203 | 1:6f37253dab87 | 365 | void TPM1_Handler(); |
emh203 | 1:6f37253dab87 | 366 | |
emh203 | 1:6f37253dab87 | 367 | |
emh203 | 1:6f37253dab87 | 368 | void TFC_Init() |
emh203 | 1:6f37253dab87 | 369 | { |
emh203 | 1:6f37253dab87 | 370 | |
emh203 | 1:6f37253dab87 | 371 | TFC_GPIO_Init(); |
emh203 | 1:6f37253dab87 | 372 | |
emh203 | 1:6f37253dab87 | 373 | TFC_InitADC_System(); // Always call this before the Servo init function.... The IRQ for the Servo code modifies ADC registers and the clocks need enable to the ADC peripherals 1st! |
emh203 | 1:6f37253dab87 | 374 | |
emh203 | 1:6f37253dab87 | 375 | TFC_InitLineScanCamera(); |
emh203 | 1:6f37253dab87 | 376 | |
emh203 | 1:6f37253dab87 | 377 | TFC_InitServos(SERVO_MIN_PULSE_WIDTH_DEFAULT , SERVO_MAX_PULSE_WIDTH_DEFAULT, SERVO_DEFAULT_PERIOD); |
emh203 | 1:6f37253dab87 | 378 | |
emh203 | 1:6f37253dab87 | 379 | TFC_ServoTicker = 0; |
emh203 | 1:6f37253dab87 | 380 | |
emh203 | 1:6f37253dab87 | 381 | TFC_InitMotorPWM(FTM0_DEFAULT_SWITCHING_FREQUENCY); |
emh203 | 1:6f37253dab87 | 382 | |
emh203 | 1:6f37253dab87 | 383 | } |
emh203 | 1:6f37253dab87 | 384 | |
emh203 | 1:6f37253dab87 | 385 | |
emh203 | 1:6f37253dab87 | 386 | void TFC_GPIO_Init() |
emh203 | 1:6f37253dab87 | 387 | { |
emh203 | 1:6f37253dab87 | 388 | |
emh203 | 1:6f37253dab87 | 389 | //enable Clocks to all ports |
emh203 | 1:6f37253dab87 | 390 | |
emh203 | 1:6f37253dab87 | 391 | SIM->SCGC5 |= SIM_SCGC5_PORTA_MASK | SIM_SCGC5_PORTB_MASK | SIM_SCGC5_PORTC_MASK | SIM_SCGC5_PORTD_MASK | SIM_SCGC5_PORTE_MASK; |
emh203 | 1:6f37253dab87 | 392 | |
emh203 | 1:6f37253dab87 | 393 | //Setup Pins as GPIO |
emh203 | 1:6f37253dab87 | 394 | PORTE->PCR[21] = PORT_PCR_MUX(1) | PORT_PCR_DSE_MASK; |
emh203 | 1:6f37253dab87 | 395 | PORTE->PCR[20] = PORT_PCR_MUX(1); |
emh203 | 1:6f37253dab87 | 396 | |
emh203 | 1:6f37253dab87 | 397 | //Port for Pushbuttons |
emh203 | 1:6f37253dab87 | 398 | PORTC->PCR[13] = PORT_PCR_MUX(1); |
emh203 | 1:6f37253dab87 | 399 | PORTC->PCR[17] = PORT_PCR_MUX(1); |
emh203 | 1:6f37253dab87 | 400 | |
emh203 | 1:6f37253dab87 | 401 | |
emh203 | 1:6f37253dab87 | 402 | //Ports for DIP Switches |
emh203 | 1:6f37253dab87 | 403 | PORTE->PCR[2] = PORT_PCR_MUX(1); |
emh203 | 1:6f37253dab87 | 404 | PORTE->PCR[3] = PORT_PCR_MUX(1); |
emh203 | 1:6f37253dab87 | 405 | PORTE->PCR[4] = PORT_PCR_MUX(1); |
emh203 | 1:6f37253dab87 | 406 | PORTE->PCR[5] = PORT_PCR_MUX(1); |
emh203 | 1:6f37253dab87 | 407 | |
emh203 | 1:6f37253dab87 | 408 | //Ports for LEDs |
emh203 | 1:6f37253dab87 | 409 | PORTB->PCR[8] = PORT_PCR_MUX(1) | PORT_PCR_DSE_MASK; |
emh203 | 1:6f37253dab87 | 410 | PORTB->PCR[9] = PORT_PCR_MUX(1) | PORT_PCR_DSE_MASK; |
emh203 | 1:6f37253dab87 | 411 | PORTB->PCR[10] = PORT_PCR_MUX(1) | PORT_PCR_DSE_MASK; |
emh203 | 1:6f37253dab87 | 412 | PORTB->PCR[11] = PORT_PCR_MUX(1) | PORT_PCR_DSE_MASK; |
emh203 | 1:6f37253dab87 | 413 | |
emh203 | 1:6f37253dab87 | 414 | |
emh203 | 1:6f37253dab87 | 415 | //Setup the output pins |
emh203 | 1:6f37253dab87 | 416 | PTE->PDDR = TFC_HBRIDGE_EN_LOC; |
emh203 | 1:6f37253dab87 | 417 | PTB->PDDR = TFC_BAT_LED0_LOC | TFC_BAT_LED1_LOC | TFC_BAT_LED2_LOC | TFC_BAT_LED3_LOC; |
emh203 | 1:6f37253dab87 | 418 | |
emh203 | 1:6f37253dab87 | 419 | TFC_SetBatteryLED(0); |
emh203 | 1:6f37253dab87 | 420 | TFC_HBRIDGE_DISABLE; |
emh203 | 1:6f37253dab87 | 421 | } |
emh203 | 1:6f37253dab87 | 422 | |
emh203 | 1:6f37253dab87 | 423 | void TFC_SetBatteryLED(uint8_t Value) |
emh203 | 1:6f37253dab87 | 424 | { |
emh203 | 1:6f37253dab87 | 425 | if(Value & 0x01) |
emh203 | 1:6f37253dab87 | 426 | TFC_BAT_LED0_ON; |
emh203 | 1:6f37253dab87 | 427 | else |
emh203 | 1:6f37253dab87 | 428 | TFC_BAT_LED0_OFF; |
emh203 | 1:6f37253dab87 | 429 | |
emh203 | 1:6f37253dab87 | 430 | if(Value & 0x02) |
emh203 | 1:6f37253dab87 | 431 | TFC_BAT_LED1_ON; |
emh203 | 1:6f37253dab87 | 432 | else |
emh203 | 1:6f37253dab87 | 433 | TFC_BAT_LED1_OFF; |
emh203 | 1:6f37253dab87 | 434 | |
emh203 | 1:6f37253dab87 | 435 | if(Value & 0x04) |
emh203 | 1:6f37253dab87 | 436 | TFC_BAT_LED2_ON; |
emh203 | 1:6f37253dab87 | 437 | else |
emh203 | 1:6f37253dab87 | 438 | TFC_BAT_LED2_OFF; |
emh203 | 1:6f37253dab87 | 439 | |
emh203 | 1:6f37253dab87 | 440 | if(Value & 0x08) |
emh203 | 1:6f37253dab87 | 441 | TFC_BAT_LED3_ON; |
emh203 | 1:6f37253dab87 | 442 | else |
emh203 | 1:6f37253dab87 | 443 | TFC_BAT_LED3_OFF; |
emh203 | 1:6f37253dab87 | 444 | } |
emh203 | 1:6f37253dab87 | 445 | |
emh203 | 1:6f37253dab87 | 446 | uint8_t TFC_GetDIP_Switch() |
emh203 | 1:6f37253dab87 | 447 | { |
emh203 | 1:6f37253dab87 | 448 | uint8_t DIP_Val=0; |
emh203 | 1:6f37253dab87 | 449 | |
emh203 | 1:6f37253dab87 | 450 | DIP_Val = (PTE->PDIR>>2) & 0xF; |
emh203 | 1:6f37253dab87 | 451 | |
emh203 | 1:6f37253dab87 | 452 | return DIP_Val; |
emh203 | 1:6f37253dab87 | 453 | } |
emh203 | 1:6f37253dab87 | 454 | |
emh203 | 1:6f37253dab87 | 455 | uint8_t TFC_ReadPushButton(uint8_t Index) |
emh203 | 1:6f37253dab87 | 456 | { |
emh203 | 1:6f37253dab87 | 457 | if(Index == 0) { |
emh203 | 1:6f37253dab87 | 458 | return TFC_PUSH_BUTTON_0_PRESSED; |
emh203 | 1:6f37253dab87 | 459 | } else { |
emh203 | 1:6f37253dab87 | 460 | return TFC_PUSH_BUTTON_1_PRESSED; |
emh203 | 1:6f37253dab87 | 461 | } |
emh203 | 1:6f37253dab87 | 462 | } |
emh203 | 1:6f37253dab87 | 463 | |
emh203 | 1:6f37253dab87 | 464 | extern "C" void TPM1_IRQHandler() |
emh203 | 1:6f37253dab87 | 465 | { |
emh203 | 1:6f37253dab87 | 466 | //Clear the overflow mask if set. According to the reference manual, we clear by writing a logic one! |
emh203 | 1:6f37253dab87 | 467 | if(TPM1->SC & TPM_SC_TOF_MASK) |
emh203 | 1:6f37253dab87 | 468 | TPM1->SC |= TPM_SC_TOF_MASK; |
emh203 | 1:6f37253dab87 | 469 | |
emh203 | 1:6f37253dab87 | 470 | //Dump the queued values to the timer channels |
emh203 | 1:6f37253dab87 | 471 | TPM1->CONTROLS[0].CnV = QueuedServo0Val; |
emh203 | 1:6f37253dab87 | 472 | TPM1->CONTROLS[1].CnV = QueuedServo1Val; |
emh203 | 1:6f37253dab87 | 473 | |
emh203 | 1:6f37253dab87 | 474 | |
emh203 | 1:6f37253dab87 | 475 | //Prime the next ADC capture cycle |
emh203 | 1:6f37253dab87 | 476 | TAOS_SI_HIGH; |
emh203 | 1:6f37253dab87 | 477 | //Prime the ADC pump and start capturing POT 0 |
emh203 | 1:6f37253dab87 | 478 | CurrentADC_State = ADC_STATE_CAPTURE_POT_0; |
emh203 | 1:6f37253dab87 | 479 | |
emh203 | 1:6f37253dab87 | 480 | ADC0->CFG2 &= ~ADC_CFG2_MUXSEL_MASK; //Select the A side of the mux |
emh203 | 1:6f37253dab87 | 481 | ADC0->SC1[0] = TFC_POT_0_ADC_CHANNEL | ADC_SC1_AIEN_MASK; //Start the State machine at POT0 |
emh203 | 1:6f37253dab87 | 482 | |
emh203 | 1:6f37253dab87 | 483 | //Flag that a new cervo cycle will start |
emh203 | 1:6f37253dab87 | 484 | if (TFC_ServoTicker < 0xffffffff)//if servo tick less than max value, count up... |
emh203 | 1:6f37253dab87 | 485 | TFC_ServoTicker++; |
emh203 | 1:6f37253dab87 | 486 | |
emh203 | 1:6f37253dab87 | 487 | } |
emh203 | 1:6f37253dab87 | 488 | |
emh203 | 1:6f37253dab87 | 489 | |
emh203 | 1:6f37253dab87 | 490 | void TFC_InitServos(float PulseWidthMin, float PulseWidthMax, float ServoPeriod) |
emh203 | 1:6f37253dab87 | 491 | { |
emh203 | 1:6f37253dab87 | 492 | |
emh203 | 1:6f37253dab87 | 493 | SIM->SCGC5 |= SIM_SCGC5_PORTB_MASK; |
emh203 | 1:6f37253dab87 | 494 | |
emh203 | 1:6f37253dab87 | 495 | _ServoPeriod = ServoPeriod; |
emh203 | 1:6f37253dab87 | 496 | _ServoDutyCycleMin = PulseWidthMin/ServoPeriod; |
emh203 | 1:6f37253dab87 | 497 | _ServoDutyCycleMax = PulseWidthMax/ServoPeriod; |
emh203 | 1:6f37253dab87 | 498 | |
emh203 | 1:6f37253dab87 | 499 | //Clock Setup for the TPM requires a couple steps. |
emh203 | 1:6f37253dab87 | 500 | SIM->SCGC6 &= ~SIM_SCGC6_TPM1_MASK; |
emh203 | 1:6f37253dab87 | 501 | //1st, set the clock mux |
emh203 | 1:6f37253dab87 | 502 | //See Page 124 of f the KL25 Sub-Family Reference Manual, Rev. 3, September 2012 |
emh203 | 1:6f37253dab87 | 503 | SIM->SOPT2 |= SIM_SOPT2_PLLFLLSEL_MASK;// We Want MCGPLLCLK/2 (See Page 196 of the KL25 Sub-Family Reference Manual, Rev. 3, September 2012) |
emh203 | 1:6f37253dab87 | 504 | SIM->SOPT2 &= ~(SIM_SOPT2_TPMSRC_MASK); |
emh203 | 1:6f37253dab87 | 505 | SIM->SOPT2 |= SIM_SOPT2_TPMSRC(1); |
emh203 | 1:6f37253dab87 | 506 | |
emh203 | 1:6f37253dab87 | 507 | //Enable the Clock to the FTM0 Module |
emh203 | 1:6f37253dab87 | 508 | //See Page 207 of f the KL25 Sub-Family Reference Manual, Rev. 3, September 2012 |
emh203 | 1:6f37253dab87 | 509 | SIM->SCGC6 |= SIM_SCGC6_TPM1_MASK; |
emh203 | 1:6f37253dab87 | 510 | |
emh203 | 1:6f37253dab87 | 511 | //The TPM Module has Clock. Now set up the peripheral |
emh203 | 1:6f37253dab87 | 512 | |
emh203 | 1:6f37253dab87 | 513 | //Blow away the control registers to ensure that the counter is not running |
emh203 | 1:6f37253dab87 | 514 | TPM1->SC = 0; |
emh203 | 1:6f37253dab87 | 515 | TPM1->CONF = 0; |
emh203 | 1:6f37253dab87 | 516 | |
emh203 | 1:6f37253dab87 | 517 | //While the counter is disabled we can setup the prescaler |
emh203 | 1:6f37253dab87 | 518 | |
emh203 | 1:6f37253dab87 | 519 | TPM1->SC = TPM_SC_PS(FTM1_CLK_PRESCALE); |
emh203 | 1:6f37253dab87 | 520 | TPM1->SC |= TPM_SC_TOIE_MASK; //Enable Interrupts for the Timer Overflow |
emh203 | 1:6f37253dab87 | 521 | |
emh203 | 1:6f37253dab87 | 522 | //Setup the mod register to get the correct PWM Period |
emh203 | 1:6f37253dab87 | 523 | |
emh203 | 1:6f37253dab87 | 524 | TPM1->MOD = (SystemCoreClock/(1<<(FTM1_CLK_PRESCALE))) * _ServoPeriod; |
emh203 | 1:6f37253dab87 | 525 | //Setup Channels 0 and 1 |
emh203 | 1:6f37253dab87 | 526 | |
emh203 | 1:6f37253dab87 | 527 | TPM1->CONTROLS[0].CnSC = TPM_CnSC_MSB_MASK | TPM_CnSC_ELSB_MASK; |
emh203 | 1:6f37253dab87 | 528 | TPM1->CONTROLS[1].CnSC = TPM_CnSC_MSB_MASK | TPM_CnSC_ELSB_MASK; |
emh203 | 1:6f37253dab87 | 529 | |
emh203 | 1:6f37253dab87 | 530 | |
emh203 | 1:6f37253dab87 | 531 | //Set the Default duty cycle to servo neutral |
emh203 | 1:6f37253dab87 | 532 | TFC_SetServo(0, 0.0); |
emh203 | 1:6f37253dab87 | 533 | TFC_SetServo(1, 0.0); |
emh203 | 1:6f37253dab87 | 534 | |
emh203 | 1:6f37253dab87 | 535 | //Enable the TPM COunter |
emh203 | 1:6f37253dab87 | 536 | TPM1->SC |= TPM_SC_CMOD(1); |
emh203 | 1:6f37253dab87 | 537 | |
emh203 | 1:6f37253dab87 | 538 | //Enable TPM1 IRQ on the NVIC |
emh203 | 1:6f37253dab87 | 539 | |
emh203 | 1:6f37253dab87 | 540 | //NVIC_SetVector(TPM1_IRQn,(uint32_t)TPM1_Handler); |
emh203 | 1:6f37253dab87 | 541 | NVIC_EnableIRQ(TPM1_IRQn); |
emh203 | 1:6f37253dab87 | 542 | |
emh203 | 1:6f37253dab87 | 543 | //Enable the FTM functions on the the port |
emh203 | 1:6f37253dab87 | 544 | |
emh203 | 1:6f37253dab87 | 545 | PORTB->PCR[0] = PORT_PCR_MUX(3); |
emh203 | 1:6f37253dab87 | 546 | PORTB->PCR[1] = PORT_PCR_MUX(3); |
emh203 | 1:6f37253dab87 | 547 | |
emh203 | 1:6f37253dab87 | 548 | } |
emh203 | 1:6f37253dab87 | 549 | |
emh203 | 1:6f37253dab87 | 550 | |
emh203 | 1:6f37253dab87 | 551 | void TFC_SetServoDutyCycle(uint8_t ServoNumber, float DutyCycle) |
emh203 | 1:6f37253dab87 | 552 | { |
emh203 | 1:6f37253dab87 | 553 | switch(ServoNumber) { |
emh203 | 1:6f37253dab87 | 554 | default: |
emh203 | 1:6f37253dab87 | 555 | case 0: |
emh203 | 1:6f37253dab87 | 556 | |
emh203 | 1:6f37253dab87 | 557 | QueuedServo0Val = TPM1->MOD * DutyCycle; |
emh203 | 1:6f37253dab87 | 558 | |
emh203 | 1:6f37253dab87 | 559 | break; |
emh203 | 1:6f37253dab87 | 560 | |
emh203 | 1:6f37253dab87 | 561 | case 1: |
emh203 | 1:6f37253dab87 | 562 | |
emh203 | 1:6f37253dab87 | 563 | QueuedServo1Val = TPM1->MOD * DutyCycle; |
emh203 | 1:6f37253dab87 | 564 | |
emh203 | 1:6f37253dab87 | 565 | break; |
emh203 | 1:6f37253dab87 | 566 | } |
emh203 | 1:6f37253dab87 | 567 | } |
emh203 | 1:6f37253dab87 | 568 | |
emh203 | 1:6f37253dab87 | 569 | void TFC_SetServo(uint8_t ServoNumber, float Position) |
emh203 | 1:6f37253dab87 | 570 | { |
emh203 | 1:6f37253dab87 | 571 | TFC_SetServoDutyCycle(ServoNumber , |
emh203 | 3:23cce037011f | 572 | ((Position + 1.0)/2) * ((_ServoDutyCycleMax - _ServoDutyCycleMin))+_ServoDutyCycleMin) ; |
emh203 | 1:6f37253dab87 | 573 | |
emh203 | 1:6f37253dab87 | 574 | } |
emh203 | 1:6f37253dab87 | 575 | |
emh203 | 1:6f37253dab87 | 576 | //******************************************************************************************************** |
emh203 | 1:6f37253dab87 | 577 | //******************************************************************************************************** |
emh203 | 1:6f37253dab87 | 578 | //******************************************************************************************************** |
emh203 | 1:6f37253dab87 | 579 | // _____ _____ ______ _ _ _ _ _____ _______ _____ ____ _ _ _____ |
emh203 | 1:6f37253dab87 | 580 | // /\ | __ \ / ____| | ____| | | | \ | |/ ____|__ __|_ _/ __ \| \ | |/ ____| |
emh203 | 1:6f37253dab87 | 581 | // / \ | | | | | | |__ | | | | \| | | | | | || | | | \| | (___ |
emh203 | 1:6f37253dab87 | 582 | // / /\ \ | | | | | | __| | | | | . ` | | | | | || | | | . ` |\___ \ |
emh203 | 1:6f37253dab87 | 583 | // / ____ \| |__| | |____ | | | |__| | |\ | |____ | | _| || |__| | |\ |____) | |
emh203 | 1:6f37253dab87 | 584 | // /_/ \_\_____/ \_____| |_| \____/|_| \_|\_____| |_| |_____\____/|_| \_|_____/ |
emh203 | 1:6f37253dab87 | 585 | // ******************************************************************************************************** |
emh203 | 1:6f37253dab87 | 586 | // ******************************************************************************************************** |
emh203 | 1:6f37253dab87 | 587 | // ******************************************************************************************************** |
emh203 | 1:6f37253dab87 | 588 | |
emh203 | 1:6f37253dab87 | 589 | |
emh203 | 1:6f37253dab87 | 590 | |
emh203 | 1:6f37253dab87 | 591 | |
emh203 | 1:6f37253dab87 | 592 | |
emh203 | 1:6f37253dab87 | 593 | uint8_t ADC_Cal(ADC_MemMapPtr adcmap) |
emh203 | 1:6f37253dab87 | 594 | { |
emh203 | 1:6f37253dab87 | 595 | |
emh203 | 1:6f37253dab87 | 596 | uint16_t cal_var; |
emh203 | 1:6f37253dab87 | 597 | |
emh203 | 1:6f37253dab87 | 598 | ADC_SC2_REG(adcmap) &= ~ADC_SC2_ADTRG_MASK ; // Enable Software Conversion Trigger for Calibration Process - ADC0_SC2 = ADC0_SC2 | ADC_SC2_ADTRGW(0); |
emh203 | 1:6f37253dab87 | 599 | ADC_SC3_REG(adcmap) &= ( ~ADC_SC3_ADCO_MASK & ~ADC_SC3_AVGS_MASK ); // set single conversion, clear avgs bitfield for next writing |
emh203 | 1:6f37253dab87 | 600 | ADC_SC3_REG(adcmap) |= ( ADC_SC3_AVGE_MASK | ADC_SC3_AVGS(AVGS_32) ); // Turn averaging ON and set at max value ( 32 ) |
emh203 | 1:6f37253dab87 | 601 | |
emh203 | 1:6f37253dab87 | 602 | |
emh203 | 1:6f37253dab87 | 603 | ADC_SC3_REG(adcmap) |= ADC_SC3_CAL_MASK ; // Start CAL |
emh203 | 1:6f37253dab87 | 604 | while ( (ADC_SC1_REG(adcmap,A) & ADC_SC1_COCO_MASK ) == COCO_NOT ); // Wait calibration end |
emh203 | 1:6f37253dab87 | 605 | |
emh203 | 1:6f37253dab87 | 606 | if ((ADC_SC3_REG(adcmap)& ADC_SC3_CALF_MASK) == CALF_FAIL ) { |
emh203 | 1:6f37253dab87 | 607 | return(1); // Check for Calibration fail error and return |
emh203 | 1:6f37253dab87 | 608 | } |
emh203 | 1:6f37253dab87 | 609 | // Calculate plus-side calibration |
emh203 | 1:6f37253dab87 | 610 | cal_var = 0x00; |
emh203 | 1:6f37253dab87 | 611 | |
emh203 | 1:6f37253dab87 | 612 | cal_var = ADC_CLP0_REG(adcmap); |
emh203 | 1:6f37253dab87 | 613 | cal_var += ADC_CLP1_REG(adcmap); |
emh203 | 1:6f37253dab87 | 614 | cal_var += ADC_CLP2_REG(adcmap); |
emh203 | 1:6f37253dab87 | 615 | cal_var += ADC_CLP3_REG(adcmap); |
emh203 | 1:6f37253dab87 | 616 | cal_var += ADC_CLP4_REG(adcmap); |
emh203 | 1:6f37253dab87 | 617 | cal_var += ADC_CLPS_REG(adcmap); |
emh203 | 1:6f37253dab87 | 618 | |
emh203 | 1:6f37253dab87 | 619 | cal_var = cal_var/2; |
emh203 | 1:6f37253dab87 | 620 | cal_var |= 0x8000; // Set MSB |
emh203 | 1:6f37253dab87 | 621 | |
emh203 | 1:6f37253dab87 | 622 | ADC_PG_REG(adcmap) = ADC_PG_PG(cal_var); |
emh203 | 1:6f37253dab87 | 623 | |
emh203 | 1:6f37253dab87 | 624 | |
emh203 | 1:6f37253dab87 | 625 | // Calculate minus-side calibration |
emh203 | 1:6f37253dab87 | 626 | cal_var = 0x00; |
emh203 | 1:6f37253dab87 | 627 | |
emh203 | 1:6f37253dab87 | 628 | cal_var = ADC_CLM0_REG(adcmap); |
emh203 | 1:6f37253dab87 | 629 | cal_var += ADC_CLM1_REG(adcmap); |
emh203 | 1:6f37253dab87 | 630 | cal_var += ADC_CLM2_REG(adcmap); |
emh203 | 1:6f37253dab87 | 631 | cal_var += ADC_CLM3_REG(adcmap); |
emh203 | 1:6f37253dab87 | 632 | cal_var += ADC_CLM4_REG(adcmap); |
emh203 | 1:6f37253dab87 | 633 | cal_var += ADC_CLMS_REG(adcmap); |
emh203 | 1:6f37253dab87 | 634 | |
emh203 | 1:6f37253dab87 | 635 | cal_var = cal_var/2; |
emh203 | 1:6f37253dab87 | 636 | |
emh203 | 1:6f37253dab87 | 637 | cal_var |= 0x8000; // Set MSB |
emh203 | 1:6f37253dab87 | 638 | |
emh203 | 1:6f37253dab87 | 639 | ADC_MG_REG(adcmap) = ADC_MG_MG(cal_var); |
emh203 | 1:6f37253dab87 | 640 | |
emh203 | 1:6f37253dab87 | 641 | ADC_SC3_REG(adcmap) &= ~ADC_SC3_CAL_MASK ; /* Clear CAL bit */ |
emh203 | 1:6f37253dab87 | 642 | |
emh203 | 1:6f37253dab87 | 643 | return(0); |
emh203 | 1:6f37253dab87 | 644 | } |
emh203 | 1:6f37253dab87 | 645 | |
emh203 | 1:6f37253dab87 | 646 | |
emh203 | 1:6f37253dab87 | 647 | void ADC_Config_Alt(ADC_MemMapPtr adcmap, tADC_ConfigPtr ADC_CfgPtr) |
emh203 | 1:6f37253dab87 | 648 | { |
emh203 | 1:6f37253dab87 | 649 | ADC_CFG1_REG(adcmap) = ADC_CfgPtr->CONFIG1; |
emh203 | 1:6f37253dab87 | 650 | ADC_CFG2_REG(adcmap) = ADC_CfgPtr->CONFIG2; |
emh203 | 1:6f37253dab87 | 651 | ADC_CV1_REG(adcmap) = ADC_CfgPtr->COMPARE1; |
emh203 | 1:6f37253dab87 | 652 | ADC_CV2_REG(adcmap) = ADC_CfgPtr->COMPARE2; |
emh203 | 1:6f37253dab87 | 653 | ADC_SC2_REG(adcmap) = ADC_CfgPtr->STATUS2; |
emh203 | 1:6f37253dab87 | 654 | ADC_SC3_REG(adcmap) = ADC_CfgPtr->STATUS3; |
emh203 | 1:6f37253dab87 | 655 | //ADC_PGA_REG(adcmap) = ADC_CfgPtr->PGA; |
emh203 | 1:6f37253dab87 | 656 | ADC_SC1_REG(adcmap,A)= ADC_CfgPtr->STATUS1A; |
emh203 | 1:6f37253dab87 | 657 | ADC_SC1_REG(adcmap,B)= ADC_CfgPtr->STATUS1B; |
emh203 | 1:6f37253dab87 | 658 | } |
emh203 | 1:6f37253dab87 | 659 | |
emh203 | 1:6f37253dab87 | 660 | |
emh203 | 1:6f37253dab87 | 661 | void ADC_Read_Cal(ADC_MemMapPtr adcmap, tADC_Cal_Blk *blk) |
emh203 | 1:6f37253dab87 | 662 | { |
emh203 | 1:6f37253dab87 | 663 | blk->OFS = ADC_OFS_REG(adcmap); |
emh203 | 1:6f37253dab87 | 664 | blk->PG = ADC_PG_REG(adcmap); |
emh203 | 1:6f37253dab87 | 665 | blk->MG = ADC_MG_REG(adcmap); |
emh203 | 1:6f37253dab87 | 666 | blk->CLPD = ADC_CLPD_REG(adcmap); |
emh203 | 1:6f37253dab87 | 667 | blk->CLPS = ADC_CLPS_REG(adcmap); |
emh203 | 1:6f37253dab87 | 668 | blk->CLP4 = ADC_CLP4_REG(adcmap); |
emh203 | 1:6f37253dab87 | 669 | blk->CLP3 = ADC_CLP3_REG(adcmap); |
emh203 | 1:6f37253dab87 | 670 | blk->CLP2 = ADC_CLP2_REG(adcmap); |
emh203 | 1:6f37253dab87 | 671 | blk->CLP1 = ADC_CLP1_REG(adcmap); |
emh203 | 1:6f37253dab87 | 672 | blk->CLP0 = ADC_CLP0_REG(adcmap); |
emh203 | 1:6f37253dab87 | 673 | blk->CLMD = ADC_CLMD_REG(adcmap); |
emh203 | 1:6f37253dab87 | 674 | blk->CLMS = ADC_CLMS_REG(adcmap); |
emh203 | 1:6f37253dab87 | 675 | blk->CLM4 = ADC_CLM4_REG(adcmap); |
emh203 | 1:6f37253dab87 | 676 | blk->CLM3 = ADC_CLM3_REG(adcmap); |
emh203 | 1:6f37253dab87 | 677 | blk->CLM2 = ADC_CLM2_REG(adcmap); |
emh203 | 1:6f37253dab87 | 678 | blk->CLM1 = ADC_CLM1_REG(adcmap); |
emh203 | 1:6f37253dab87 | 679 | blk->CLM0 = ADC_CLM0_REG(adcmap); |
emh203 | 1:6f37253dab87 | 680 | |
emh203 | 1:6f37253dab87 | 681 | } |
emh203 | 1:6f37253dab87 | 682 | |
emh203 | 1:6f37253dab87 | 683 | |
emh203 | 1:6f37253dab87 | 684 | void TFC_InitADC0() |
emh203 | 1:6f37253dab87 | 685 | { |
emh203 | 1:6f37253dab87 | 686 | tADC_Config Master_Adc0_Config; |
emh203 | 1:6f37253dab87 | 687 | |
emh203 | 1:6f37253dab87 | 688 | |
emh203 | 1:6f37253dab87 | 689 | SIM->SCGC6 |= (SIM_SCGC6_ADC0_MASK); |
emh203 | 1:6f37253dab87 | 690 | |
emh203 | 1:6f37253dab87 | 691 | //Lets calibrate the ADC. 1st setup how the channel will be used. |
emh203 | 1:6f37253dab87 | 692 | |
emh203 | 1:6f37253dab87 | 693 | |
emh203 | 1:6f37253dab87 | 694 | Master_Adc0_Config.CONFIG1 = ADLPC_NORMAL //No low power mode |
emh203 | 1:6f37253dab87 | 695 | | ADC_CFG1_ADIV(ADIV_4) //divide input by 4 |
emh203 | 1:6f37253dab87 | 696 | | ADLSMP_LONG //long sample time |
emh203 | 1:6f37253dab87 | 697 | | ADC_CFG1_MODE(MODE_12)//single ended 8-bit conversion |
emh203 | 1:6f37253dab87 | 698 | | ADC_CFG1_ADICLK(ADICLK_BUS); |
emh203 | 1:6f37253dab87 | 699 | |
emh203 | 1:6f37253dab87 | 700 | Master_Adc0_Config.CONFIG2 = MUXSEL_ADCA // select the A side of the ADC channel. |
emh203 | 1:6f37253dab87 | 701 | | ADACKEN_DISABLED |
emh203 | 1:6f37253dab87 | 702 | | ADHSC_HISPEED |
emh203 | 1:6f37253dab87 | 703 | | ADC_CFG2_ADLSTS(ADLSTS_2);//Extra long sample Time (20 extra clocks) |
emh203 | 1:6f37253dab87 | 704 | |
emh203 | 1:6f37253dab87 | 705 | |
emh203 | 1:6f37253dab87 | 706 | Master_Adc0_Config.COMPARE1 = 00000; // Comparators don't matter for calibration |
emh203 | 1:6f37253dab87 | 707 | Master_Adc0_Config.COMPARE1 = 0xFFFF; |
emh203 | 1:6f37253dab87 | 708 | |
emh203 | 1:6f37253dab87 | 709 | Master_Adc0_Config.STATUS2 = ADTRG_HW //hardware triggers for calibration |
emh203 | 1:6f37253dab87 | 710 | | ACFE_DISABLED //disable comparator |
emh203 | 1:6f37253dab87 | 711 | | ACFGT_GREATER |
emh203 | 1:6f37253dab87 | 712 | | ACREN_ENABLED |
emh203 | 1:6f37253dab87 | 713 | | DMAEN_DISABLED //Disable DMA |
emh203 | 1:6f37253dab87 | 714 | | ADC_SC2_REFSEL(REFSEL_EXT); //External Reference |
emh203 | 1:6f37253dab87 | 715 | |
emh203 | 1:6f37253dab87 | 716 | Master_Adc0_Config.STATUS3 = CAL_OFF |
emh203 | 1:6f37253dab87 | 717 | | ADCO_SINGLE |
emh203 | 1:6f37253dab87 | 718 | | AVGE_ENABLED; |
emh203 | 1:6f37253dab87 | 719 | // | ADC_SC3_AVGS(AVGS_4); |
emh203 | 1:6f37253dab87 | 720 | |
emh203 | 1:6f37253dab87 | 721 | Master_Adc0_Config.PGA = 0; // Disable the PGA |
emh203 | 1:6f37253dab87 | 722 | |
emh203 | 1:6f37253dab87 | 723 | |
emh203 | 1:6f37253dab87 | 724 | // Configure ADC as it will be used, but because ADC_SC1_ADCH is 31, |
emh203 | 1:6f37253dab87 | 725 | // the ADC will be inactive. Channel 31 is just disable function. |
emh203 | 1:6f37253dab87 | 726 | // There really is no channel 31. |
emh203 | 1:6f37253dab87 | 727 | |
emh203 | 1:6f37253dab87 | 728 | Master_Adc0_Config.STATUS1A = AIEN_ON | DIFF_SINGLE | ADC_SC1_ADCH(31); |
emh203 | 1:6f37253dab87 | 729 | |
emh203 | 1:6f37253dab87 | 730 | |
emh203 | 1:6f37253dab87 | 731 | ADC_Config_Alt(ADC0_BASE_PTR, &Master_Adc0_Config); // config ADC |
emh203 | 1:6f37253dab87 | 732 | |
emh203 | 1:6f37253dab87 | 733 | // Calibrate the ADC in the configuration in which it will be used: |
emh203 | 1:6f37253dab87 | 734 | ADC_Cal(ADC0_BASE_PTR); // do the calibration |
emh203 | 1:6f37253dab87 | 735 | |
emh203 | 1:6f37253dab87 | 736 | |
emh203 | 1:6f37253dab87 | 737 | Master_Adc0_Config.STATUS2 = ACFE_DISABLED //disable comparator |
emh203 | 1:6f37253dab87 | 738 | | ACFGT_GREATER |
emh203 | 1:6f37253dab87 | 739 | | ACREN_ENABLED |
emh203 | 1:6f37253dab87 | 740 | | DMAEN_DISABLED //Disable DMA |
emh203 | 1:6f37253dab87 | 741 | | ADC_SC2_REFSEL(REFSEL_EXT); //External Reference |
emh203 | 1:6f37253dab87 | 742 | |
emh203 | 1:6f37253dab87 | 743 | Master_Adc0_Config.STATUS3 = CAL_OFF |
emh203 | 1:6f37253dab87 | 744 | | ADCO_SINGLE; |
emh203 | 1:6f37253dab87 | 745 | |
emh203 | 1:6f37253dab87 | 746 | |
emh203 | 1:6f37253dab87 | 747 | |
emh203 | 1:6f37253dab87 | 748 | ADC_Config_Alt(ADC0_BASE_PTR, &Master_Adc0_Config); |
emh203 | 1:6f37253dab87 | 749 | } |
emh203 | 1:6f37253dab87 | 750 | |
emh203 | 1:6f37253dab87 | 751 | |
emh203 | 1:6f37253dab87 | 752 | void TFC_InitADC_System() |
emh203 | 1:6f37253dab87 | 753 | { |
emh203 | 1:6f37253dab87 | 754 | |
emh203 | 1:6f37253dab87 | 755 | TFC_InitADC0(); |
emh203 | 1:6f37253dab87 | 756 | |
emh203 | 1:6f37253dab87 | 757 | |
emh203 | 1:6f37253dab87 | 758 | //All Adc processing of the Pots and linescan will be done in the ADC0 IRQ! |
emh203 | 1:6f37253dab87 | 759 | //A state machine will scan through the channels. |
emh203 | 1:6f37253dab87 | 760 | //This is done to automate the linescan capture on Channel 0 to ensure that timing is very even |
emh203 | 1:6f37253dab87 | 761 | CurrentADC_State = ADC_STATE_INIT; |
emh203 | 1:6f37253dab87 | 762 | |
emh203 | 1:6f37253dab87 | 763 | //The pump will be primed with the TPM1 interrupt. upon timeout/interrupt it will set the SI signal high |
emh203 | 1:6f37253dab87 | 764 | //for the camera and then start the conversions for the pots. |
emh203 | 1:6f37253dab87 | 765 | |
emh203 | 1:6f37253dab87 | 766 | // NVIC_SetVector(ADC0_IRQn,(uint32_t)ADC0_Handler); |
emh203 | 1:6f37253dab87 | 767 | NVIC_EnableIRQ(ADC0_IRQn); |
emh203 | 1:6f37253dab87 | 768 | |
emh203 | 1:6f37253dab87 | 769 | } |
emh203 | 1:6f37253dab87 | 770 | |
emh203 | 1:6f37253dab87 | 771 | extern "C" void ADC0_IRQHandler() |
emh203 | 1:6f37253dab87 | 772 | { |
emh203 | 1:6f37253dab87 | 773 | uint8_t Junk; |
emh203 | 1:6f37253dab87 | 774 | |
emh203 | 1:6f37253dab87 | 775 | switch(CurrentADC_State) { |
emh203 | 1:6f37253dab87 | 776 | default: |
emh203 | 1:6f37253dab87 | 777 | Junk = ADC0->R[0]; |
emh203 | 1:6f37253dab87 | 778 | break; |
emh203 | 1:6f37253dab87 | 779 | |
emh203 | 1:6f37253dab87 | 780 | case ADC_STATE_CAPTURE_POT_0: |
emh203 | 1:6f37253dab87 | 781 | |
emh203 | 1:6f37253dab87 | 782 | PotADC_Value[0] = ADC0->R[0]; |
emh203 | 1:6f37253dab87 | 783 | ADC0->CFG2 &= ~ADC_CFG2_MUXSEL_MASK; //Select the A side of the mux |
emh203 | 1:6f37253dab87 | 784 | ADC0->SC1[0] = TFC_POT_1_ADC_CHANNEL | ADC_SC1_AIEN_MASK; |
emh203 | 1:6f37253dab87 | 785 | CurrentADC_State = ADC_STATE_CAPTURE_POT_1; |
emh203 | 1:6f37253dab87 | 786 | |
emh203 | 1:6f37253dab87 | 787 | break; |
emh203 | 1:6f37253dab87 | 788 | |
emh203 | 1:6f37253dab87 | 789 | case ADC_STATE_CAPTURE_POT_1: |
emh203 | 1:6f37253dab87 | 790 | |
emh203 | 1:6f37253dab87 | 791 | PotADC_Value[1] = ADC0->R[0]; |
emh203 | 1:6f37253dab87 | 792 | ADC0->CFG2 |= ADC_CFG2_MUXSEL_MASK; //Select the B side of the mux |
emh203 | 1:6f37253dab87 | 793 | ADC0->SC1[0] = TFC_BAT_SENSE_CHANNEL| ADC_SC1_AIEN_MASK; |
emh203 | 1:6f37253dab87 | 794 | CurrentADC_State = ADC_STATE_CAPTURE_BATTERY_LEVEL; |
emh203 | 1:6f37253dab87 | 795 | |
emh203 | 1:6f37253dab87 | 796 | break; |
emh203 | 1:6f37253dab87 | 797 | |
emh203 | 1:6f37253dab87 | 798 | case ADC_STATE_CAPTURE_BATTERY_LEVEL: |
emh203 | 1:6f37253dab87 | 799 | |
emh203 | 1:6f37253dab87 | 800 | BatSenseADC_Value = ADC0->R[0]; |
emh203 | 1:6f37253dab87 | 801 | |
emh203 | 1:6f37253dab87 | 802 | //Now we will start the sequence for the Linescan camera |
emh203 | 1:6f37253dab87 | 803 | |
emh203 | 1:6f37253dab87 | 804 | TAOS_CLK_HIGH; |
emh203 | 1:6f37253dab87 | 805 | |
redxeth | 7:b34924a05d60 | 806 | for(Junk = 0; Junk<TAOS_CLK_COUNT/2; Junk++) { |
emh203 | 1:6f37253dab87 | 807 | } |
emh203 | 1:6f37253dab87 | 808 | |
emh203 | 1:6f37253dab87 | 809 | TAOS_SI_LOW; |
emh203 | 1:6f37253dab87 | 810 | |
emh203 | 1:6f37253dab87 | 811 | |
emh203 | 1:6f37253dab87 | 812 | CurrentLineScanPixel = 0; |
emh203 | 1:6f37253dab87 | 813 | CurrentLineScanChannel = 0; |
emh203 | 1:6f37253dab87 | 814 | CurrentADC_State = ADC_STATE_CAPTURE_LINE_SCAN; |
emh203 | 1:6f37253dab87 | 815 | ADC0->CFG2 |= ADC_CFG2_MUXSEL_MASK; //Select the B side of the mux |
emh203 | 1:6f37253dab87 | 816 | ADC0->SC1[0] = TFC_LINESCAN0_ADC_CHANNEL | ADC_SC1_AIEN_MASK; |
emh203 | 1:6f37253dab87 | 817 | |
emh203 | 1:6f37253dab87 | 818 | break; |
emh203 | 1:6f37253dab87 | 819 | |
emh203 | 1:6f37253dab87 | 820 | case ADC_STATE_CAPTURE_LINE_SCAN: |
emh203 | 1:6f37253dab87 | 821 | |
emh203 | 1:6f37253dab87 | 822 | if(CurrentLineScanPixel<128) { |
emh203 | 1:6f37253dab87 | 823 | if(CurrentLineScanChannel == 0) { |
emh203 | 1:6f37253dab87 | 824 | LineScanImage0WorkingBuffer[CurrentLineScanPixel] = ADC0->R[0]; |
emh203 | 1:6f37253dab87 | 825 | ADC0->SC1[0] = TFC_LINESCAN1_ADC_CHANNEL | ADC_SC1_AIEN_MASK; |
emh203 | 1:6f37253dab87 | 826 | CurrentLineScanChannel = 1; |
emh203 | 1:6f37253dab87 | 827 | |
emh203 | 1:6f37253dab87 | 828 | } else { |
emh203 | 1:6f37253dab87 | 829 | LineScanImage1WorkingBuffer[CurrentLineScanPixel] = ADC0->R[0]; |
emh203 | 1:6f37253dab87 | 830 | ADC0->SC1[0] = TFC_LINESCAN0_ADC_CHANNEL | ADC_SC1_AIEN_MASK; |
emh203 | 1:6f37253dab87 | 831 | CurrentLineScanChannel = 0; |
emh203 | 1:6f37253dab87 | 832 | CurrentLineScanPixel++; |
emh203 | 1:6f37253dab87 | 833 | |
emh203 | 1:6f37253dab87 | 834 | TAOS_CLK_LOW; |
redxeth | 7:b34924a05d60 | 835 | for(Junk = 0; Junk<TAOS_CLK_COUNT/2; Junk++) { |
emh203 | 1:6f37253dab87 | 836 | } |
emh203 | 1:6f37253dab87 | 837 | TAOS_CLK_HIGH; |
emh203 | 1:6f37253dab87 | 838 | |
emh203 | 1:6f37253dab87 | 839 | } |
emh203 | 1:6f37253dab87 | 840 | |
emh203 | 1:6f37253dab87 | 841 | } else { |
emh203 | 1:6f37253dab87 | 842 | // done with the capture sequence. we can wait for the PIT0 IRQ to restart |
emh203 | 1:6f37253dab87 | 843 | |
emh203 | 1:6f37253dab87 | 844 | TAOS_CLK_HIGH; |
emh203 | 1:6f37253dab87 | 845 | |
redxeth | 7:b34924a05d60 | 846 | for(Junk = 0; Junk<TAOS_CLK_COUNT/2; Junk++) { |
emh203 | 1:6f37253dab87 | 847 | } |
emh203 | 1:6f37253dab87 | 848 | |
emh203 | 1:6f37253dab87 | 849 | TAOS_CLK_LOW; |
emh203 | 1:6f37253dab87 | 850 | CurrentADC_State = ADC_STATE_INIT; |
emh203 | 1:6f37253dab87 | 851 | |
emh203 | 1:6f37253dab87 | 852 | //swap the buffer |
emh203 | 1:6f37253dab87 | 853 | |
emh203 | 1:6f37253dab87 | 854 | if(LineScanWorkingBuffer == 0) { |
emh203 | 1:6f37253dab87 | 855 | LineScanWorkingBuffer = 1; |
emh203 | 1:6f37253dab87 | 856 | |
emh203 | 1:6f37253dab87 | 857 | LineScanImage0WorkingBuffer = &LineScanImage0Buffer[1][0]; |
emh203 | 1:6f37253dab87 | 858 | LineScanImage1WorkingBuffer = &LineScanImage1Buffer[1][0]; |
emh203 | 1:6f37253dab87 | 859 | |
emh203 | 3:23cce037011f | 860 | TFC_LineScanImage0 = &LineScanImage0Buffer[0][0]; |
emh203 | 3:23cce037011f | 861 | TFC_LineScanImage1 = &LineScanImage1Buffer[0][0]; |
emh203 | 1:6f37253dab87 | 862 | } else { |
emh203 | 1:6f37253dab87 | 863 | LineScanWorkingBuffer = 0; |
emh203 | 1:6f37253dab87 | 864 | LineScanImage0WorkingBuffer = &LineScanImage0Buffer[0][0]; |
emh203 | 1:6f37253dab87 | 865 | LineScanImage1WorkingBuffer = &LineScanImage1Buffer[0][0]; |
emh203 | 1:6f37253dab87 | 866 | |
emh203 | 3:23cce037011f | 867 | TFC_LineScanImage0 = &LineScanImage0Buffer[1][0]; |
emh203 | 3:23cce037011f | 868 | TFC_LineScanImage1 = &LineScanImage1Buffer[1][0]; |
emh203 | 1:6f37253dab87 | 869 | } |
emh203 | 1:6f37253dab87 | 870 | |
emh203 | 3:23cce037011f | 871 | TFC_LineScanImageReady++; |
emh203 | 1:6f37253dab87 | 872 | } |
emh203 | 1:6f37253dab87 | 873 | |
emh203 | 1:6f37253dab87 | 874 | break; |
emh203 | 1:6f37253dab87 | 875 | } |
emh203 | 1:6f37253dab87 | 876 | |
emh203 | 1:6f37253dab87 | 877 | } |
emh203 | 1:6f37253dab87 | 878 | |
emh203 | 1:6f37253dab87 | 879 | void TFC_InitLineScanCamera() |
emh203 | 1:6f37253dab87 | 880 | { |
emh203 | 1:6f37253dab87 | 881 | SIM->SCGC5 |= SIM_SCGC5_PORTE_MASK | SIM_SCGC5_PORTD_MASK; //Make sure the clock is enabled for PORTE; |
emh203 | 1:6f37253dab87 | 882 | PORTE->PCR[1] = PORT_PCR_MUX(1) | PORT_PCR_DSE_MASK; //Enable GPIO on on the pin for the CLOCK Signal |
emh203 | 1:6f37253dab87 | 883 | PORTD->PCR[7] = PORT_PCR_MUX(1) | PORT_PCR_DSE_MASK; //Enable GPIO on on the pin for SI signal |
emh203 | 1:6f37253dab87 | 884 | |
emh203 | 1:6f37253dab87 | 885 | PORTD->PCR[5] = PORT_PCR_MUX(0); //Make sure AO signal goes to an analog input |
emh203 | 1:6f37253dab87 | 886 | PORTD->PCR[6] = PORT_PCR_MUX(0); //Make sure AO signal goes to an analog input |
emh203 | 1:6f37253dab87 | 887 | |
emh203 | 1:6f37253dab87 | 888 | //Make sure the Clock and SI pins are outputs |
emh203 | 1:6f37253dab87 | 889 | PTD->PDDR |= (1<<7); |
emh203 | 1:6f37253dab87 | 890 | PTE->PDDR |= (1<<1); |
emh203 | 1:6f37253dab87 | 891 | |
emh203 | 1:6f37253dab87 | 892 | TAOS_CLK_LOW; |
emh203 | 1:6f37253dab87 | 893 | TAOS_SI_LOW; |
emh203 | 1:6f37253dab87 | 894 | |
emh203 | 1:6f37253dab87 | 895 | LineScanWorkingBuffer = 0; |
emh203 | 1:6f37253dab87 | 896 | |
emh203 | 1:6f37253dab87 | 897 | LineScanImage0WorkingBuffer = &LineScanImage0Buffer[LineScanWorkingBuffer][0]; |
emh203 | 1:6f37253dab87 | 898 | LineScanImage1WorkingBuffer = &LineScanImage1Buffer[LineScanWorkingBuffer][0]; |
emh203 | 1:6f37253dab87 | 899 | |
emh203 | 3:23cce037011f | 900 | TFC_LineScanImage0 = &LineScanImage0Buffer[1][0]; |
emh203 | 3:23cce037011f | 901 | TFC_LineScanImage1 = &LineScanImage1Buffer[1][0]; |
emh203 | 1:6f37253dab87 | 902 | } |
emh203 | 1:6f37253dab87 | 903 | |
emh203 | 1:6f37253dab87 | 904 | |
emh203 | 1:6f37253dab87 | 905 | |
emh203 | 1:6f37253dab87 | 906 | |
emh203 | 1:6f37253dab87 | 907 | |
emh203 | 1:6f37253dab87 | 908 | /** Initialized TPM0 to be used for generating PWM signals for the the dual drive motors. This method is called in the TFC constructor with a default value of 4000.0Hz |
emh203 | 1:6f37253dab87 | 909 | * |
emh203 | 1:6f37253dab87 | 910 | * @param SwitchingFrequency PWM Switching Frequency in floating point format. Pick something between 1000 and 9000. Maybe you can modulate it and make a tune. |
emh203 | 1:6f37253dab87 | 911 | */ |
emh203 | 1:6f37253dab87 | 912 | void TFC_InitMotorPWM(float SwitchingFrequency) |
emh203 | 1:6f37253dab87 | 913 | { |
emh203 | 1:6f37253dab87 | 914 | //Clock Setup for the TPM requires a couple steps. |
emh203 | 1:6f37253dab87 | 915 | |
emh203 | 1:6f37253dab87 | 916 | //1st, set the clock mux |
emh203 | 1:6f37253dab87 | 917 | //See Page 124 of f the KL25 Sub-Family Reference Manual, Rev. 3, September 2012 |
emh203 | 3:23cce037011f | 918 | SIM->SOPT2 |= SIM_SOPT2_PLLFLLSEL_MASK;// We Want MCGPLLCLK/2 (See Page 196 of the KL25 Sub-Family Reference Manual, Rev. 3, September 2012) |
emh203 | 3:23cce037011f | 919 | SIM->SOPT2 &= ~(SIM_SOPT2_TPMSRC_MASK); |
emh203 | 3:23cce037011f | 920 | SIM->SOPT2 |= SIM_SOPT2_TPMSRC(1); //We want the MCGPLLCLK/2 (See Page 196 of the KL25 Sub-Family Reference Manual, Rev. 3, September 2012) |
emh203 | 1:6f37253dab87 | 921 | |
emh203 | 1:6f37253dab87 | 922 | |
emh203 | 1:6f37253dab87 | 923 | //Enable the Clock to the FTM0 Module |
emh203 | 1:6f37253dab87 | 924 | //See Page 207 of f the KL25 Sub-Family Reference Manual, Rev. 3, September 2012 |
emh203 | 1:6f37253dab87 | 925 | SIM->SCGC6 |= SIM_SCGC6_TPM0_MASK; |
emh203 | 1:6f37253dab87 | 926 | |
emh203 | 1:6f37253dab87 | 927 | //The TPM Module has Clock. Now set up the peripheral |
emh203 | 1:6f37253dab87 | 928 | |
emh203 | 1:6f37253dab87 | 929 | //Blow away the control registers to ensure that the counter is not running |
emh203 | 1:6f37253dab87 | 930 | TPM0->SC = 0; |
emh203 | 1:6f37253dab87 | 931 | TPM0->CONF = 0; |
emh203 | 1:6f37253dab87 | 932 | |
emh203 | 1:6f37253dab87 | 933 | //While the counter is disabled we can setup the prescaler |
emh203 | 1:6f37253dab87 | 934 | |
emh203 | 1:6f37253dab87 | 935 | TPM0->SC = TPM_SC_PS(FTM0_CLK_PRESCALE); |
emh203 | 1:6f37253dab87 | 936 | |
emh203 | 1:6f37253dab87 | 937 | //Setup the mod register to get the correct PWM Period |
emh203 | 1:6f37253dab87 | 938 | |
emh203 | 1:6f37253dab87 | 939 | TPM0->MOD = (uint32_t)((float)(FTM0_CLOCK/(1<<FTM0_CLK_PRESCALE))/SwitchingFrequency); |
emh203 | 1:6f37253dab87 | 940 | |
emh203 | 1:6f37253dab87 | 941 | //Setup Channels 0,1,2,3 |
emh203 | 1:6f37253dab87 | 942 | TPM0->CONTROLS[0].CnSC = TPM_CnSC_MSB_MASK | TPM_CnSC_ELSB_MASK; |
emh203 | 1:6f37253dab87 | 943 | TPM0->CONTROLS[1].CnSC = TPM_CnSC_MSB_MASK | TPM_CnSC_ELSA_MASK; // invert the second PWM signal for a complimentary output; |
emh203 | 1:6f37253dab87 | 944 | TPM0->CONTROLS[2].CnSC = TPM_CnSC_MSB_MASK | TPM_CnSC_ELSB_MASK; |
emh203 | 1:6f37253dab87 | 945 | TPM0->CONTROLS[3].CnSC = TPM_CnSC_MSB_MASK | TPM_CnSC_ELSA_MASK; // invert the second PWM signal for a complimentary output; |
emh203 | 1:6f37253dab87 | 946 | |
emh203 | 1:6f37253dab87 | 947 | //Enable the Counter |
emh203 | 1:6f37253dab87 | 948 | |
emh203 | 1:6f37253dab87 | 949 | //Set the Default duty cycle to 50% duty cycle |
emh203 | 1:6f37253dab87 | 950 | TFC_SetMotorPWM(0.0,0.0); |
emh203 | 1:6f37253dab87 | 951 | |
emh203 | 1:6f37253dab87 | 952 | //Enable the TPM COunter |
emh203 | 1:6f37253dab87 | 953 | TPM0->SC |= TPM_SC_CMOD(1); |
emh203 | 1:6f37253dab87 | 954 | |
emh203 | 1:6f37253dab87 | 955 | //Enable the FTM functions on the the port |
emh203 | 1:6f37253dab87 | 956 | PORTC->PCR[1] = PORT_PCR_MUX(4); |
emh203 | 1:6f37253dab87 | 957 | PORTC->PCR[2] = PORT_PCR_MUX(4); |
emh203 | 1:6f37253dab87 | 958 | PORTC->PCR[3] = PORT_PCR_MUX(4); |
emh203 | 1:6f37253dab87 | 959 | PORTC->PCR[4] = PORT_PCR_MUX(4); |
emh203 | 1:6f37253dab87 | 960 | |
emh203 | 1:6f37253dab87 | 961 | } |
emh203 | 1:6f37253dab87 | 962 | |
emh203 | 1:6f37253dab87 | 963 | void TFC_SetMotorPWM(float MotorA , float MotorB) |
emh203 | 1:6f37253dab87 | 964 | { |
emh203 | 1:6f37253dab87 | 965 | if(MotorA>1.0) |
emh203 | 1:6f37253dab87 | 966 | MotorA = 1.0; |
emh203 | 1:6f37253dab87 | 967 | else if(MotorA<-1.0) |
emh203 | 1:6f37253dab87 | 968 | MotorA = -1.0; |
emh203 | 1:6f37253dab87 | 969 | |
emh203 | 1:6f37253dab87 | 970 | if(MotorB>1.0) |
emh203 | 1:6f37253dab87 | 971 | MotorB = 1.0; |
emh203 | 1:6f37253dab87 | 972 | else if(MotorB<-1.0) |
emh203 | 1:6f37253dab87 | 973 | MotorB = -1.0; |
emh203 | 1:6f37253dab87 | 974 | |
emh203 | 1:6f37253dab87 | 975 | TPM0->CONTROLS[2].CnV = (uint16_t) ((float)TPM0->MOD * (float)((MotorA + 1.0)/2.0)); |
emh203 | 1:6f37253dab87 | 976 | TPM0->CONTROLS[3].CnV = TPM0->CONTROLS[2].CnV; |
emh203 | 1:6f37253dab87 | 977 | TPM0->CONTROLS[0].CnV = (uint16_t) ((float)TPM0->MOD * (float)((MotorB + 1.0)/2.0)); |
emh203 | 1:6f37253dab87 | 978 | TPM0->CONTROLS[1].CnV = TPM0->CONTROLS[0].CnV; |
emh203 | 1:6f37253dab87 | 979 | |
emh203 | 1:6f37253dab87 | 980 | } |
emh203 | 1:6f37253dab87 | 981 | |
emh203 | 1:6f37253dab87 | 982 | //Pot Reading is Scaled to return a value of -1.0 to 1.0 |
emh203 | 1:6f37253dab87 | 983 | float TFC_ReadPot(uint8_t Channel) |
emh203 | 1:6f37253dab87 | 984 | { |
emh203 | 1:6f37253dab87 | 985 | if(Channel == 0) |
emh203 | 1:6f37253dab87 | 986 | return ((float)PotADC_Value[0]/-((float)ADC_MAX_CODE/2.0))+1.0; |
emh203 | 1:6f37253dab87 | 987 | else |
emh203 | 1:6f37253dab87 | 988 | return ((float)PotADC_Value[1]/-((float)ADC_MAX_CODE/2.0))+1.0; |
emh203 | 1:6f37253dab87 | 989 | } |
emh203 | 1:6f37253dab87 | 990 | |
emh203 | 1:6f37253dab87 | 991 | float TFC_ReadBatteryVoltage() |
emh203 | 1:6f37253dab87 | 992 | { |
emh203 | 1:6f37253dab87 | 993 | return (((float)BatSenseADC_Value/(float)(ADC_MAX_CODE)) * 3.0);// * ((47000.0+10000.0)/10000.0); |
emh203 | 1:6f37253dab87 | 994 | } |
emh203 | 3:23cce037011f | 995 | |
emh203 | 3:23cce037011f | 996 | |
emh203 | 3:23cce037011f | 997 | void TFC_SetBatteryLED_Level(uint8_t BattLevel) |
emh203 | 3:23cce037011f | 998 | { |
emh203 | 3:23cce037011f | 999 | switch(BattLevel) |
emh203 | 3:23cce037011f | 1000 | { |
emh203 | 3:23cce037011f | 1001 | default: |
emh203 | 3:23cce037011f | 1002 | case 0: |
emh203 | 3:23cce037011f | 1003 | TFC_BAT_LED0_OFF; |
emh203 | 3:23cce037011f | 1004 | TFC_BAT_LED1_OFF; |
emh203 | 3:23cce037011f | 1005 | TFC_BAT_LED2_OFF; |
emh203 | 3:23cce037011f | 1006 | TFC_BAT_LED3_OFF; |
emh203 | 3:23cce037011f | 1007 | break; |
emh203 | 3:23cce037011f | 1008 | |
emh203 | 3:23cce037011f | 1009 | case 1: |
emh203 | 3:23cce037011f | 1010 | TFC_BAT_LED0_ON; |
emh203 | 3:23cce037011f | 1011 | TFC_BAT_LED1_OFF; |
emh203 | 3:23cce037011f | 1012 | TFC_BAT_LED2_OFF; |
emh203 | 3:23cce037011f | 1013 | TFC_BAT_LED3_OFF; |
emh203 | 3:23cce037011f | 1014 | break; |
emh203 | 3:23cce037011f | 1015 | |
emh203 | 3:23cce037011f | 1016 | case 2: |
emh203 | 3:23cce037011f | 1017 | TFC_BAT_LED0_ON; |
emh203 | 3:23cce037011f | 1018 | TFC_BAT_LED1_ON; |
emh203 | 3:23cce037011f | 1019 | TFC_BAT_LED2_OFF; |
emh203 | 3:23cce037011f | 1020 | TFC_BAT_LED3_OFF; |
emh203 | 3:23cce037011f | 1021 | break; |
emh203 | 3:23cce037011f | 1022 | |
emh203 | 3:23cce037011f | 1023 | case 3: |
emh203 | 3:23cce037011f | 1024 | TFC_BAT_LED0_ON; |
emh203 | 3:23cce037011f | 1025 | TFC_BAT_LED1_ON; |
emh203 | 3:23cce037011f | 1026 | TFC_BAT_LED2_ON; |
emh203 | 3:23cce037011f | 1027 | TFC_BAT_LED3_OFF; |
emh203 | 3:23cce037011f | 1028 | break; |
emh203 | 3:23cce037011f | 1029 | |
emh203 | 3:23cce037011f | 1030 | case 4: |
emh203 | 3:23cce037011f | 1031 | TFC_BAT_LED0_ON; |
emh203 | 3:23cce037011f | 1032 | TFC_BAT_LED1_ON; |
emh203 | 3:23cce037011f | 1033 | TFC_BAT_LED2_ON; |
emh203 | 3:23cce037011f | 1034 | TFC_BAT_LED3_ON; |
emh203 | 3:23cce037011f | 1035 | break; |
emh203 | 3:23cce037011f | 1036 | |
emh203 | 3:23cce037011f | 1037 | } |
emh203 | 3:23cce037011f | 1038 | } |