![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Uses the APDS_9960 Digital Proximity, Ambient Light, RGB and Gesture Sensor library to play detected gesture sounds on a speaker from the SDcard
Dependencies: mbed SDFileSystem wave_player
glibr.h
- Committer:
- kbhagat6
- Date:
- 2015-03-06
- Revision:
- 5:3eb4f3091bd8
- Parent:
- 4:84545b0e63a9
- Child:
- 8:6fa15d4e31fb
File content as of revision 5:3eb4f3091bd8:
#include "mbed.h" #define DEBUG 0 /* APDS-9960 I2C address */ #define APDS9960_I2C_ADDR 0x39 /* Gesture parameters */ #define GESTURE_THRESHOLD_OUT 10 #define GESTURE_SENSITIVITY_1 50 #define GESTURE_SENSITIVITY_2 20 /* Error code for returned values */ #define ERROR 0xFF /* Acceptable device IDs */ #define APDS9960_ID_1 0xAB #define APDS9960_ID_2 0x9C /* Misc parameters */ #define FIFO_PAUSE_TIME 30 // Wait period (ms) between FIFO reads /* APDS-9960 register addresses */ #define APDS9960_ENABLE 0x80 #define APDS9960_ATIME 0x81 #define APDS9960_WTIME 0x83 #define APDS9960_AILTL 0x84 #define APDS9960_AILTH 0x85 #define APDS9960_AIHTL 0x86 #define APDS9960_AIHTH 0x87 #define APDS9960_PILT 0x89 #define APDS9960_PIHT 0x8B #define APDS9960_PERS 0x8C #define APDS9960_CONFIG1 0x8D #define APDS9960_PPULSE 0x8E #define APDS9960_CONTROL 0x8F #define APDS9960_CONFIG2 0x90 #define APDS9960_ID 0x92 #define APDS9960_STATUS 0x93 #define APDS9960_CDATAL 0x94 #define APDS9960_CDATAH 0x95 #define APDS9960_RDATAL 0x96 #define APDS9960_RDATAH 0x97 #define APDS9960_GDATAL 0x98 #define APDS9960_GDATAH 0x99 #define APDS9960_BDATAL 0x9A #define APDS9960_BDATAH 0x9B #define APDS9960_PDATA 0x9C #define APDS9960_POFFSET_UR 0x9D #define APDS9960_POFFSET_DL 0x9E #define APDS9960_CONFIG3 0x9F #define APDS9960_GPENTH 0xA0 #define APDS9960_GEXTH 0xA1 #define APDS9960_GCONF1 0xA2 #define APDS9960_GCONF2 0xA3 #define APDS9960_GOFFSET_U 0xA4 #define APDS9960_GOFFSET_D 0xA5 #define APDS9960_GOFFSET_L 0xA7 #define APDS9960_GOFFSET_R 0xA9 #define APDS9960_GPULSE 0xA6 #define APDS9960_GCONF3 0xAA #define APDS9960_GCONF4 0xAB #define APDS9960_GFLVL 0xAE #define APDS9960_GSTATUS 0xAF #define APDS9960_IFORCE 0xE4 #define APDS9960_PICLEAR 0xE5 #define APDS9960_CICLEAR 0xE6 #define APDS9960_AICLEAR 0xE7 #define APDS9960_GFIFO_U 0xFC #define APDS9960_GFIFO_D 0xFD #define APDS9960_GFIFO_L 0xFE #define APDS9960_GFIFO_R 0xFF /* Bit fields */ #define APDS9960_PON 0x01 #define APDS9960_AEN 0x02 #define APDS9960_PEN 0x04 #define APDS9960_WEN 0x08 #define APSD9960_AIEN 0x10 #define APDS9960_PIEN 0x20 #define APDS9960_GEN 0x40 #define APDS9960_GVALID 0x01 /* On/Off definitions */ #define OFF 0 #define ON 1 /* Acceptable parameters for setMode */ #define POWER 0 #define AMBIENT_LIGHT 1 #define PROXIMITY 2 #define WAIT 3 #define AMBIENT_LIGHT_INT 4 #define PROXIMITY_INT 5 #define GESTURE 6 #define ALL 7 /* LED Drive values */ #define LED_DRIVE_100MA 0 #define LED_DRIVE_50MA 1 #define LED_DRIVE_25MA 2 #define LED_DRIVE_12_5MA 3 /* Proximity Gain (PGAIN) values */ #define PGAIN_1X 0 #define PGAIN_2X 1 #define PGAIN_4X 2 #define PGAIN_8X 3 /* ALS Gain (AGAIN) values */ #define AGAIN_1X 0 #define AGAIN_4X 1 #define AGAIN_16X 2 #define AGAIN_64X 3 /* Gesture Gain (GGAIN) values */ #define GGAIN_1X 0 #define GGAIN_2X 1 #define GGAIN_4X 2 #define GGAIN_8X 3 /* LED Boost values */ #define LED_BOOST_100 0 #define LED_BOOST_150 1 #define LED_BOOST_200 2 #define LED_BOOST_300 3 /* Gesture wait time values */ #define GWTIME_0MS 0 #define GWTIME_2_8MS 1 #define GWTIME_5_6MS 2 #define GWTIME_8_4MS 3 #define GWTIME_14_0MS 4 #define GWTIME_22_4MS 5 #define GWTIME_30_8MS 6 #define GWTIME_39_2MS 7 /* Default values */ #define DEFAULT_ATIME 219 // 103ms #define DEFAULT_WTIME 246 // 27ms #define DEFAULT_PROX_PPULSE 0x87 // 16us, 8 pulses #define DEFAULT_GESTURE_PPULSE 0x89 // 16us, 10 pulses #define DEFAULT_POFFSET_UR 0 // 0 offset #define DEFAULT_POFFSET_DL 0 // 0 offset #define DEFAULT_CONFIG1 0x60 // No 12x wait (WTIME) factor #define DEFAULT_LDRIVE LED_DRIVE_100MA #define DEFAULT_PGAIN PGAIN_4X #define DEFAULT_AGAIN AGAIN_4X #define DEFAULT_PILT 0 // Low proximity threshold #define DEFAULT_PIHT 50 // High proximity threshold #define DEFAULT_AILT 0xFFFF // Force interrupt for calibration #define DEFAULT_AIHT 0 #define DEFAULT_PERS 0x11 // 2 consecutive prox or ALS for int. #define DEFAULT_CONFIG2 0x01 // No saturation interrupts or LED boost #define DEFAULT_CONFIG3 0 // Enable all photodiodes, no SAI #define DEFAULT_GPENTH 40 // Threshold for entering gesture mode #define DEFAULT_GEXTH 30 // Threshold for exiting gesture mode #define DEFAULT_GCONF1 0x40 // 4 gesture events for int., 1 for exit #define DEFAULT_GGAIN GGAIN_4X #define DEFAULT_GLDRIVE LED_DRIVE_100MA #define DEFAULT_GWTIME GWTIME_2_8MS #define DEFAULT_GOFFSET 0 // No offset scaling for gesture mode #define DEFAULT_GPULSE 0xC9 // 32us, 10 pulses #define DEFAULT_GCONF3 0 // All photodiodes active during gesture #define DEFAULT_GIEN 0 // Disable gesture interrupts /* Direction definitions */ enum { DIR_NONE, DIR_LEFT, DIR_RIGHT, DIR_UP, DIR_DOWN, DIR_NEAR, DIR_FAR, DIR_ALL }; /* State definitions */ enum { NA_STATE, NEAR_STATE, FAR_STATE, ALL_STATE }; /* Container for gesture data */ typedef struct gesture_data_type { uint8_t u_data[32]; uint8_t d_data[32]; uint8_t l_data[32]; uint8_t r_data[32]; uint8_t index; uint8_t total_gestures; uint8_t in_threshold; uint8_t out_threshold; } gesture_data_type; class glibr{ public: glibr(PinName sda, PinName scl); //constructor ~glibr(); uint8_t ginit(); /* Initialization methods */ uint8_t getMode(); bool setMode(uint8_t mode, uint8_t enable); /* Turn the APDS-9960 on and off */ bool enablePower(); bool disablePower(); /* Enable or disable specific sensors */ bool enableLightSensor(bool interrupts = false); bool disableLightSensor(); bool enableProximitySensor(bool interrupts = false); bool disableProximitySensor(); bool enableGestureSensor(bool interrupts = true); bool disableGestureSensor(); /* LED drive strength control */ uint8_t getLEDDrive(); bool setLEDDrive(uint8_t drive); uint8_t getGestureLEDDrive(); bool setGestureLEDDrive(uint8_t drive); /* Gain control */ uint8_t getAmbientLightGain(); bool setAmbientLightGain(uint8_t gain); uint8_t getProximityGain(); bool setProximityGain(uint8_t gain); uint8_t getGestureGain(); bool setGestureGain(uint8_t gain); /* Get and set light interrupt thresholds */ bool getLightIntLowThreshold(uint16_t &threshold); bool setLightIntLowThreshold(uint16_t threshold); bool getLightIntHighThreshold(uint16_t &threshold); bool setLightIntHighThreshold(uint16_t threshold); /* Get and set proximity interrupt thresholds */ bool getProximityIntLowThreshold(uint8_t &threshold); bool setProximityIntLowThreshold(uint8_t threshold); bool getProximityIntHighThreshold(uint8_t &threshold); bool setProximityIntHighThreshold(uint8_t threshold); /* Get and set interrupt enables */ uint8_t getAmbientLightIntEnable(); bool setAmbientLightIntEnable(uint8_t enable); uint8_t getProximityIntEnable(); bool setProximityIntEnable(uint8_t enable); uint8_t getGestureIntEnable(); bool setGestureIntEnable(uint8_t enable); /* Clear interrupts */ bool clearAmbientLightInt(); bool clearProximityInt(); /* Ambient light methods */ bool readAmbientLight(uint16_t &val); bool readRedLight(uint16_t &val); bool readGreenLight(uint16_t &val); bool readBlueLight(uint16_t &val); /* Proximity methods */ bool readProximity(uint8_t &val); /* Gesture methods */ bool isGestureAvailable(); int readGesture(); private: /* Gesture processing */ void resetGestureParameters(); bool processGestureData(); bool decodeGesture(); /* Proximity Interrupt Threshold */ uint8_t getProxIntLowThresh(); bool setProxIntLowThresh(uint8_t threshold); uint8_t getProxIntHighThresh(); bool setProxIntHighThresh(uint8_t threshold); /* LED Boost Control */ uint8_t getLEDBoost(); bool setLEDBoost(uint8_t boost); /* Proximity photodiode select */ uint8_t getProxGainCompEnable(); bool setProxGainCompEnable(uint8_t enable); uint8_t getProxPhotoMask(); bool setProxPhotoMask(uint8_t mask); /* Gesture threshold control */ uint8_t getGestureEnterThresh(); bool setGestureEnterThresh(uint8_t threshold); uint8_t getGestureExitThresh(); bool setGestureExitThresh(uint8_t threshold); /* Gesture LED, gain, and time control */ uint8_t getGestureWaitTime(); bool setGestureWaitTime(uint8_t time); /* Gesture mode */ uint8_t getGestureMode(); bool setGestureMode(uint8_t mode); /* Members */ gesture_data_type gesture_data_; //instanciation from struct int gesture_ud_delta_; int gesture_lr_delta_; int gesture_ud_count_; int gesture_lr_count_; int gesture_near_count_; int gesture_far_count_; int gesture_state_; int gesture_motion_; uint8_t I2CreadByte(char address, char subAddress); int I2CwriteByte(char address, char subAddress, char data); int I2CReadDataBlock(uint8_t reg, uint8_t *val, unsigned int len); I2C i2c; };