File content as of revision 0:bacc6e701fb4:

/**
******************************************************************************
* @file    low_power_manager.h
* @author  MCD Application Team
* @version V1.1.4
* @date    08-January-2018
* @brief   Header for stm32xx_lpm.c module
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics International N.V.
* All rights reserved.</center></h2>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted, provided that the following conditions are met:
*
* 1. Redistribution of source code must retain the above copyright notice,
*    this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
*    this list of conditions and the following disclaimer in the documentation
*    and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of other
*    contributors to this software may be used to endorse or promote products
*    derived from this software without specific written permission.
* 4. This software, including modifications and/or derivative works of this
*    software, must execute solely and exclusively on microcontroller or
*    microprocessor devices manufactured by or for STMicroelectronics.
* 5. Redistribution and use of this software other than as permitted under
*    this license is void and will automatically terminate your rights under
*    this license.
*
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32_LPM__H
#define __STM32_LPM__H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
/*low power manager configuration*/
typedef enum
{
  LPM_APPLI_Id =    (1 << 0),
  LPM_LIB_Id =      (1 << 1),
  LPM_RTC_Id =      (1 << 2),
  LPM_GPS_Id =      (1 << 3),
  LPM_UART_RX_Id =  (1 << 4),
  LPM_UART_TX_Id =  (1 << 5),
} LPM_Id_t;

/**
 * Low Power Mode selected
 */
typedef enum
{
  LPM_Enable=0,
  LPM_Disable,
} LPM_SetMode_t;

typedef enum
{
  LPM_SleepMode,
  LPM_StopMode,
  LPM_OffMode,
} LPM_GetMode_t;

/* Exported constants --------------------------------------------------------*/
/* External variables --------------------------------------------------------*/
/* Exported macros -----------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/**
 * @brief  This API returns the Low Power Mode selected that will be applied when the system will enter low power mode
 *         if there is no update between the time the mode is read with this API and the time the system enters
 *         low power mode.
 * @param  None
 * @retval LPM_ModeSelected_t
 */
LPM_GetMode_t LPM_GetMode(void);
/**
 * @brief  This API notifies the low power manager if the specified user allows the Off mode or not.
 *         When the application does not require the system clock, it enters Stop Mode if at least one user disallow
 *         Off Mode. Otherwise, it enters Off Mode.
 *         The default mode selection for all users is Off mode enabled
 * @param  id: process Id
 * @param  mode: mode selected
 * @retval None
 */
void LPM_SetStopMode(LPM_Id_t id, LPM_SetMode_t mode);

void LPM_SetOffMode(LPM_Id_t id, LPM_SetMode_t mode);
/**
 * @brief  This API shall be used by the application when there is no more code to execute so that the system may
 *         enter low-power mode. The mode selected depends on the information received from LPM_OffModeSelection() and
 *         LPM_SysclockRequest()
 *         This function shall be called in critical section
 * @param  None
 * @retval None
 */
void LPM_EnterLowPower(void);

/**
 * @brief  This API is called by the low power manager in a critical section (PRIMASK bit set) to allow the
 *         application to implement dedicated code before entering Sleep Mode
 * @param  None
 * @retval None
 */
void LPM_EnterSleepMode(void);

/**
 * @brief  This API is called by the low power manager in a critical section (PRIMASK bit set) to allow the
 *         application to implement dedicated code before getting out from Sleep Mode
 * @param  None
 * @retval None
 */
void LPM_ExitSleepMode(void);

/**
 * @brief  This API is called by the low power manager in a critical section (PRIMASK bit set) to allow the
 *         application to implement dedicated code before entering Stop Mode
 * @param  None
 * @retval None
 */
void LPM_EnterStopMode(void);

/**
 * @brief  This API is called by the low power manager in a critical section (PRIMASK bit set) to allow the
 *         application to implement dedicated code before getting out from Stop Mode. This is where the application
 *         should reconfigure the clock tree when needed
 * @param  None
 * @retval None
 */
void LPM_ExitStopMode(void);

/**
 * @brief  This API is called by the low power manager in a critical section (PRIMASK bit set) to allow the
 *         application to implement dedicated code before entering Off mode. This is where the application could save
 *         data in the retention memory as the RAM memory content will be lost
 * @param  None
 * @retval None
 */
void LPM_EnterOffMode(void);


/**
 * @brief  This API is called by the low power manager in a critical section (PRIMASK bit set) to allow the
 *         application to implement dedicated code before getting out from Off mode. This can only happen when the
 *         Off mode is finally not entered. In that case, the application may reverse some configurations done before
 *         entering Off mode. When Off mode is successful, the system is reset when getting out from this low-power mode
 * @param  None
 * @retval None
 */
void LPM_ExitOffMode(void);

#ifdef __cplusplus
}
#endif

#endif /*__STM32_LPM__H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/