cc y
/
mbed
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_L476RG/stm32l4xx_hal_rcc.h
- Revision:
- 122:f9eeca106725
- Parent:
- 117:99a22ba036c9
diff -r 6c34061e7c34 -r f9eeca106725 TARGET_NUCLEO_L476RG/stm32l4xx_hal_rcc.h
--- a/TARGET_NUCLEO_L476RG/stm32l4xx_hal_rcc.h Wed May 25 16:44:06 2016 +0100
+++ b/TARGET_NUCLEO_L476RG/stm32l4xx_hal_rcc.h Thu Jul 07 14:34:11 2016 +0100
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32l4xx_hal_rcc.h
* @author MCD Application Team
- * @version V1.0.0
- * @date 26-June-2015
+ * @version V1.5.1
+ * @date 31-May-2016
* @brief Header file of RCC HAL module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -71,7 +71,7 @@
This parameter must be a value of @ref RCC_PLL_Clock_Source */
uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock.
- This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
+ This parameter must be a number between Min_Data = 1 and Max_Data = 8 */
uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock.
This parameter must be a number between Min_Data = 8 and Max_Data = 86 */
@@ -106,7 +106,8 @@
This parameter can be a value of @ref RCC_HSI_Config */
uint32_t HSICalibrationValue; /*!< The calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
- This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F on STM32L47x/STM32L48x devices.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F on STM32L43x/STM32L44x/STM32L49x/STM32L4Ax/ devices */
uint32_t LSIState; /*!< The new state of the LSI.
This parameter can be a value of @ref RCC_LSI_Config */
@@ -120,6 +121,9 @@
uint32_t MSIClockRange; /*!< The MSI frequency range.
This parameter can be a value of @ref RCC_MSI_Clock_Range */
+ uint32_t HSI48State; /*!< The new state of the HSI48 (only applicable to STM32L43x/STM32L44x/STM32L49x/STM32L4Ax devices).
+ This parameter can be a value of @ref RCC_HSI48_Config */
+
RCC_PLLInitTypeDef PLL; /*!< Main PLL structure parameters */
}RCC_OscInitTypeDef;
@@ -158,7 +162,7 @@
/** @defgroup RCC_Timeout_Value Timeout Values
* @{
*/
-#define RCC_DBP_TIMEOUT_VALUE ((uint32_t)100)
+#define RCC_DBP_TIMEOUT_VALUE ((uint32_t)2U) /* 2 ms (minimum Tick + 1) */
#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT
/**
* @}
@@ -167,12 +171,15 @@
/** @defgroup RCC_Oscillator_Type Oscillator Type
* @{
*/
-#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000) /*!< Oscillator configuration unchanged */
-#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001) /*!< HSE to configure */
-#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002) /*!< HSI to configure */
-#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004) /*!< LSE to configure */
-#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008) /*!< LSI to configure */
-#define RCC_OSCILLATORTYPE_MSI ((uint32_t)0x00000010) /*!< MSI to configure */
+#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000U) /*!< Oscillator configuration unchanged */
+#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001U) /*!< HSE to configure */
+#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002U) /*!< HSI to configure */
+#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004U) /*!< LSE to configure */
+#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008U) /*!< LSI to configure */
+#define RCC_OSCILLATORTYPE_MSI ((uint32_t)0x00000010U) /*!< MSI to configure */
+#if defined(RCC_HSI48_SUPPORT)
+#define RCC_OSCILLATORTYPE_HSI48 ((uint32_t)0x00000020U) /*!< HSI48 to configure */
+#endif /* RCC_HSI48_SUPPORT */
/**
* @}
*/
@@ -180,7 +187,7 @@
/** @defgroup RCC_HSE_Config HSE Config
* @{
*/
-#define RCC_HSE_OFF ((uint32_t)0x00000000) /*!< HSE clock deactivation */
+#define RCC_HSE_OFF ((uint32_t)0x00000000U) /*!< HSE clock deactivation */
#define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */
#define RCC_HSE_BYPASS ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON)) /*!< External clock source for HSE clock */
/**
@@ -190,7 +197,7 @@
/** @defgroup RCC_LSE_Config LSE Config
* @{
*/
-#define RCC_LSE_OFF ((uint32_t)0x00000000) /*!< LSE clock deactivation */
+#define RCC_LSE_OFF ((uint32_t)0x00000000U) /*!< LSE clock deactivation */
#define RCC_LSE_ON RCC_BDCR_LSEON /*!< LSE clock activation */
#define RCC_LSE_BYPASS ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON)) /*!< External clock source for LSE clock */
/**
@@ -200,7 +207,7 @@
/** @defgroup RCC_HSI_Config HSI Config
* @{
*/
-#define RCC_HSI_OFF ((uint32_t)0x00000000) /*!< HSI clock deactivation */
+#define RCC_HSI_OFF ((uint32_t)0x00000000U) /*!< HSI clock deactivation */
#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */
#define RCC_HSICALIBRATION_DEFAULT ((uint32_t)16) /*!< Default HSI calibration trimming value */
@@ -211,7 +218,7 @@
/** @defgroup RCC_LSI_Config LSI Config
* @{
*/
-#define RCC_LSI_OFF ((uint32_t)0x00000000) /*!< LSI clock deactivation */
+#define RCC_LSI_OFF ((uint32_t)0x00000000U) /*!< LSI clock deactivation */
#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */
/**
* @}
@@ -220,7 +227,7 @@
/** @defgroup RCC_MSI_Config MSI Config
* @{
*/
-#define RCC_MSI_OFF ((uint32_t)0x00000000) /*!< MSI clock deactivation */
+#define RCC_MSI_OFF ((uint32_t)0x00000000U) /*!< MSI clock deactivation */
#define RCC_MSI_ON RCC_CR_MSION /*!< MSI clock activation */
#define RCC_MSICALIBRATION_DEFAULT ((uint32_t)0) /*!< Default MSI calibration trimming value */
@@ -228,12 +235,31 @@
* @}
*/
+#if defined(RCC_HSI48_SUPPORT)
+/** @defgroup RCC_HSI48_Config HSI48 Config
+ * @{
+ */
+#define RCC_HSI48_OFF ((uint32_t)0x00000000U) /*!< HSI48 clock deactivation */
+#define RCC_HSI48_ON RCC_CRRCR_HSI48ON /*!< HSI48 clock activation */
+/**
+ * @}
+ */
+#else
+/** @defgroup RCC_HSI48_Config HSI48 Config
+ * @{
+ */
+#define RCC_HSI48_OFF ((uint32_t)0x00000000U) /*!< HSI48 clock deactivation */
+/**
+ * @}
+ */
+#endif /* RCC_HSI48_SUPPORT */
+
/** @defgroup RCC_PLL_Config PLL Config
* @{
*/
-#define RCC_PLL_NONE ((uint32_t)0x00000000) /*!< PLL configuration unchanged */
-#define RCC_PLL_OFF ((uint32_t)0x00000001) /*!< PLL deactivation */
-#define RCC_PLL_ON ((uint32_t)0x00000002) /*!< PLL activation */
+#define RCC_PLL_NONE ((uint32_t)0x00000000U) /*!< PLL configuration unchanged */
+#define RCC_PLL_OFF ((uint32_t)0x00000001U) /*!< PLL deactivation */
+#define RCC_PLL_ON ((uint32_t)0x00000002U) /*!< PLL activation */
/**
* @}
*/
@@ -241,8 +267,41 @@
/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider
* @{
*/
-#define RCC_PLLP_DIV7 ((uint32_t)0x00000007) /*!< PLLP division factor = 7 */
-#define RCC_PLLP_DIV17 ((uint32_t)0x00000011) /*!< PLLP division factor = 17 */
+#if defined(RCC_PLLP_DIV_2_31_SUPPORT)
+#define RCC_PLLP_DIV2 ((uint32_t)0x00000002U) /*!< PLLP division factor = 2 */
+#define RCC_PLLP_DIV3 ((uint32_t)0x00000003U) /*!< PLLP division factor = 3 */
+#define RCC_PLLP_DIV4 ((uint32_t)0x00000004U) /*!< PLLP division factor = 4 */
+#define RCC_PLLP_DIV5 ((uint32_t)0x00000005U) /*!< PLLP division factor = 5 */
+#define RCC_PLLP_DIV6 ((uint32_t)0x00000006U) /*!< PLLP division factor = 6 */
+#define RCC_PLLP_DIV7 ((uint32_t)0x00000007U) /*!< PLLP division factor = 7 */
+#define RCC_PLLP_DIV8 ((uint32_t)0x00000008U) /*!< PLLP division factor = 8 */
+#define RCC_PLLP_DIV9 ((uint32_t)0x00000009U) /*!< PLLP division factor = 9 */
+#define RCC_PLLP_DIV10 ((uint32_t)0x0000000AU) /*!< PLLP division factor = 10 */
+#define RCC_PLLP_DIV11 ((uint32_t)0x0000000BU) /*!< PLLP division factor = 11 */
+#define RCC_PLLP_DIV12 ((uint32_t)0x0000000CU) /*!< PLLP division factor = 12 */
+#define RCC_PLLP_DIV13 ((uint32_t)0x0000000DU) /*!< PLLP division factor = 13 */
+#define RCC_PLLP_DIV14 ((uint32_t)0x0000000EU) /*!< PLLP division factor = 14 */
+#define RCC_PLLP_DIV15 ((uint32_t)0x0000000FU) /*!< PLLP division factor = 15 */
+#define RCC_PLLP_DIV16 ((uint32_t)0x00000010U) /*!< PLLP division factor = 16 */
+#define RCC_PLLP_DIV17 ((uint32_t)0x00000011U) /*!< PLLP division factor = 17 */
+#define RCC_PLLP_DIV18 ((uint32_t)0x00000012U) /*!< PLLP division factor = 18 */
+#define RCC_PLLP_DIV19 ((uint32_t)0x00000013U) /*!< PLLP division factor = 19 */
+#define RCC_PLLP_DIV20 ((uint32_t)0x00000014U) /*!< PLLP division factor = 20 */
+#define RCC_PLLP_DIV21 ((uint32_t)0x00000015U) /*!< PLLP division factor = 21 */
+#define RCC_PLLP_DIV22 ((uint32_t)0x00000016U) /*!< PLLP division factor = 22 */
+#define RCC_PLLP_DIV23 ((uint32_t)0x00000017U) /*!< PLLP division factor = 23 */
+#define RCC_PLLP_DIV24 ((uint32_t)0x00000018U) /*!< PLLP division factor = 24 */
+#define RCC_PLLP_DIV25 ((uint32_t)0x00000019U) /*!< PLLP division factor = 25 */
+#define RCC_PLLP_DIV26 ((uint32_t)0x0000001AU) /*!< PLLP division factor = 26 */
+#define RCC_PLLP_DIV27 ((uint32_t)0x0000001BU) /*!< PLLP division factor = 27 */
+#define RCC_PLLP_DIV28 ((uint32_t)0x0000001CU) /*!< PLLP division factor = 28 */
+#define RCC_PLLP_DIV29 ((uint32_t)0x0000001DU) /*!< PLLP division factor = 29 */
+#define RCC_PLLP_DIV30 ((uint32_t)0x0000001EU) /*!< PLLP division factor = 30 */
+#define RCC_PLLP_DIV31 ((uint32_t)0x0000001FU) /*!< PLLP division factor = 31 */
+#else
+#define RCC_PLLP_DIV7 ((uint32_t)0x00000007U) /*!< PLLP division factor = 7 */
+#define RCC_PLLP_DIV17 ((uint32_t)0x00000011U) /*!< PLLP division factor = 17 */
+#endif /* RCC_PLLP_DIV_2_31_SUPPORT */
/**
* @}
*/
@@ -250,10 +309,10 @@
/** @defgroup RCC_PLLQ_Clock_Divider PLLQ Clock Divider
* @{
*/
-#define RCC_PLLQ_DIV2 ((uint32_t)0x00000002) /*!< PLLQ division factor = 2 */
-#define RCC_PLLQ_DIV4 ((uint32_t)0x00000004) /*!< PLLQ division factor = 4 */
-#define RCC_PLLQ_DIV6 ((uint32_t)0x00000006) /*!< PLLQ division factor = 6 */
-#define RCC_PLLQ_DIV8 ((uint32_t)0x00000008) /*!< PLLQ division factor = 8 */
+#define RCC_PLLQ_DIV2 ((uint32_t)0x00000002U) /*!< PLLQ division factor = 2 */
+#define RCC_PLLQ_DIV4 ((uint32_t)0x00000004U) /*!< PLLQ division factor = 4 */
+#define RCC_PLLQ_DIV6 ((uint32_t)0x00000006U) /*!< PLLQ division factor = 6 */
+#define RCC_PLLQ_DIV8 ((uint32_t)0x00000008U) /*!< PLLQ division factor = 8 */
/**
* @}
*/
@@ -261,10 +320,10 @@
/** @defgroup RCC_PLLR_Clock_Divider PLLR Clock Divider
* @{
*/
-#define RCC_PLLR_DIV2 ((uint32_t)0x00000002) /*!< PLLR division factor = 2 */
-#define RCC_PLLR_DIV4 ((uint32_t)0x00000004) /*!< PLLR division factor = 4 */
-#define RCC_PLLR_DIV6 ((uint32_t)0x00000006) /*!< PLLR division factor = 6 */
-#define RCC_PLLR_DIV8 ((uint32_t)0x00000008) /*!< PLLR division factor = 8 */
+#define RCC_PLLR_DIV2 ((uint32_t)0x00000002U) /*!< PLLR division factor = 2 */
+#define RCC_PLLR_DIV4 ((uint32_t)0x00000004U) /*!< PLLR division factor = 4 */
+#define RCC_PLLR_DIV6 ((uint32_t)0x00000006U) /*!< PLLR division factor = 6 */
+#define RCC_PLLR_DIV8 ((uint32_t)0x00000008U) /*!< PLLR division factor = 8 */
/**
* @}
*/
@@ -272,7 +331,7 @@
/** @defgroup RCC_PLL_Clock_Source PLL Clock Source
* @{
*/
-#define RCC_PLLSOURCE_NONE ((uint32_t)0x00000000) /*!< No clock selected as PLL entry clock source */
+#define RCC_PLLSOURCE_NONE ((uint32_t)0x00000000U) /*!< No clock selected as PLL entry clock source */
#define RCC_PLLSOURCE_MSI RCC_PLLCFGR_PLLSRC_MSI /*!< MSI clock selected as PLL entry clock source */
#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI clock selected as PLL entry clock source */
#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */
@@ -283,7 +342,11 @@
/** @defgroup RCC_PLL_Clock_Output PLL Clock Output
* @{
*/
-#define RCC_PLL_SAI3CLK RCC_PLLCFGR_PLLPEN /*!< PLLSAI3CLK selection from main PLL */
+#if defined(RCC_PLLSAI2_SUPPORT)
+#define RCC_PLL_SAI3CLK RCC_PLLCFGR_PLLPEN /*!< PLLSAI3CLK selection from main PLL (for devices with PLLSAI2) */
+#else
+#define RCC_PLL_SAI2CLK RCC_PLLCFGR_PLLPEN /*!< PLLSAI2CLK selection from main PLL (for devices without PLLSAI2) */
+#endif /* RCC_PLLSAI2_SUPPORT */
#define RCC_PLL_48M1CLK RCC_PLLCFGR_PLLQEN /*!< PLL48M1CLK selection from main PLL */
#define RCC_PLL_SYSCLK RCC_PLLCFGR_PLLREN /*!< PLLCLK selection from main PLL */
/**
@@ -300,6 +363,8 @@
* @}
*/
+#if defined(RCC_PLLSAI2_SUPPORT)
+
/** @defgroup RCC_PLLSAI2_Clock_Output PLLSAI2 Clock Output
* @{
*/
@@ -309,6 +374,8 @@
* @}
*/
+#endif /* RCC_PLLSAI2_SUPPORT */
+
/** @defgroup RCC_MSI_Clock_Range MSI Clock Range
* @{
*/
@@ -331,10 +398,10 @@
/** @defgroup RCC_System_Clock_Type System Clock Type
* @{
*/
-#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001) /*!< SYSCLK to configure */
-#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002) /*!< HCLK to configure */
-#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004) /*!< PCLK1 to configure */
-#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008) /*!< PCLK2 to configure */
+#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001U) /*!< SYSCLK to configure */
+#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002U) /*!< HCLK to configure */
+#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004U) /*!< PCLK1 to configure */
+#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008U) /*!< PCLK2 to configure */
/**
* @}
*/
@@ -392,9 +459,10 @@
/** @defgroup RCC_RTC_Clock_Source RTC Clock Source
* @{
*/
-#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */
-#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */
-#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */
+#define RCC_RTCCLKSOURCE_NO_CLK ((uint32_t)0x00000000U) /*!< No clock used as RTC clock */
+#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */
+#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */
+#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */
/**
* @}
*/
@@ -402,7 +470,7 @@
/** @defgroup RCC_MCO_Index MCO Index
* @{
*/
-#define RCC_MCO1 ((uint32_t)0x00000000)
+#define RCC_MCO1 ((uint32_t)0x00000000U)
#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/
/**
* @}
@@ -411,13 +479,17 @@
/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source
* @{
*/
+#define RCC_MCO1SOURCE_NOCLOCK ((uint32_t)0x00000000U) /*!< MCO1 output disabled, no clock on MCO1 */
#define RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_0 /*!< SYSCLK selection as MCO1 source */
#define RCC_MCO1SOURCE_MSI RCC_CFGR_MCOSEL_1 /*!< MSI selection as MCO1 source */
#define RCC_MCO1SOURCE_HSI (RCC_CFGR_MCOSEL_0| RCC_CFGR_MCOSEL_1) /*!< HSI selection as MCO1 source */
#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_2 /*!< HSE selection as MCO1 source */
#define RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_2) /*!< PLLCLK selection as MCO1 source */
#define RCC_MCO1SOURCE_LSI (RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI selection as MCO1 source */
-#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCOSEL /*!< LSE selection as MCO1 source */
+#define RCC_MCO1SOURCE_LSE (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSE selection as MCO1 source */
+#if defined(RCC_HSI48_SUPPORT)
+#define RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCOSEL_3 /*!< HSI48 selection as MCO1 source (STM32L43x/STM32L44x devices) */
+#endif /* RCC_HSI48_SUPPORT */
/**
* @}
*/
@@ -425,11 +497,11 @@
/** @defgroup RCC_MCOx_Clock_Prescaler MCO1 Clock Prescaler
* @{
*/
-#define RCC_MCODIV_1 RCC_CFGR_MCO_PRE_1 /*!< MCO not divided */
-#define RCC_MCODIV_2 RCC_CFGR_MCO_PRE_2 /*!< MCO divided by 2 */
-#define RCC_MCODIV_4 RCC_CFGR_MCO_PRE_4 /*!< MCO divided by 4 */
-#define RCC_MCODIV_8 RCC_CFGR_MCO_PRE_8 /*!< MCO divided by 8 */
-#define RCC_MCODIV_16 RCC_CFGR_MCO_PRE_16 /*!< MCO divided by 16 */
+#define RCC_MCODIV_1 RCC_CFGR_MCOPRE_DIV1 /*!< MCO not divided */
+#define RCC_MCODIV_2 RCC_CFGR_MCOPRE_DIV2 /*!< MCO divided by 2 */
+#define RCC_MCODIV_4 RCC_CFGR_MCOPRE_DIV4 /*!< MCO divided by 4 */
+#define RCC_MCODIV_8 RCC_CFGR_MCOPRE_DIV8 /*!< MCO divided by 8 */
+#define RCC_MCODIV_16 RCC_CFGR_MCOPRE_DIV16 /*!< MCO divided by 16 */
/**
* @}
*/
@@ -437,52 +509,65 @@
/** @defgroup RCC_Interrupt Interrupts
* @{
*/
-#define RCC_IT_LSIRDY ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
-#define RCC_IT_LSERDY ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
-#define RCC_IT_MSIRDY ((uint32_t)0x00000004) /*!< MSI Ready Interrupt flag */
-#define RCC_IT_HSIRDY ((uint32_t)0x00000008) /*!< HSI Ready Interrupt flag */
-#define RCC_IT_HSERDY ((uint32_t)0x00000010) /*!< HSE Ready Interrupt flag */
-#define RCC_IT_PLLRDY ((uint32_t)0x00000020) /*!< PLL Ready Interrupt flag */
-#define RCC_IT_PLLSAI1RDY ((uint32_t)0x00000040) /*!< PLLSAI1 Ready Interrupt flag */
-#define RCC_IT_PLLSAI2RDY ((uint32_t)0x00000080) /*!< PLLSAI2 Ready Interrupt flag */
-#define RCC_IT_CSS ((uint32_t)0x00000100) /*!< Clock Security System Interrupt flag */
-#define RCC_IT_LSECSS ((uint32_t)0x00000200) /*!< LSE Clock Security System Interrupt flag */
+#define RCC_IT_LSIRDY RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt flag */
+#define RCC_IT_LSERDY RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */
+#define RCC_IT_MSIRDY RCC_CIFR_MSIRDYF /*!< MSI Ready Interrupt flag */
+#define RCC_IT_HSIRDY RCC_CIFR_HSIRDYF /*!< HSI16 Ready Interrupt flag */
+#define RCC_IT_HSERDY RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */
+#define RCC_IT_PLLRDY RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */
+#define RCC_IT_PLLSAI1RDY RCC_CIFR_PLLSAI1RDYF /*!< PLLSAI1 Ready Interrupt flag */
+#if defined(RCC_PLLSAI2_SUPPORT)
+#define RCC_IT_PLLSAI2RDY RCC_CIFR_PLLSAI2RDYF /*!< PLLSAI2 Ready Interrupt flag */
+#endif /* RCC_PLLSAI2_SUPPORT */
+#define RCC_IT_CSS RCC_CIFR_CSSF /*!< Clock Security System Interrupt flag */
+#define RCC_IT_LSECSS RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */
+#if defined(RCC_HSI48_SUPPORT)
+#define RCC_IT_HSI48RDY RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */
+#endif /* RCC_HSI48_SUPPORT */
/**
* @}
*/
/** @defgroup RCC_Flag Flags
- * Elements values convention: 0XXYYYYYb
+ * Elements values convention: XXXYYYYYb
* - YYYYY : Flag position in the register
- * - 0XX : Register index
- * - 01: CR register
- * - 10: BDCR register
- * - 11: CSR register
+ * - XXX : Register index
+ * - 001: CR register
+ * - 010: BDCR register
+ * - 011: CSR register
+ * - 100: CRRCR register
* @{
*/
/* Flags in the CR register */
-#define RCC_FLAG_MSIRDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_MSIRDY))) /*!< MSI Ready flag */
-#define RCC_FLAG_HSIRDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_HSIRDY))) /*!< HSI Ready flag */
-#define RCC_FLAG_HSERDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_HSERDY))) /*!< HSE Ready flag */
-#define RCC_FLAG_PLLRDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_PLLRDY))) /*!< PLL Ready flag */
-#define RCC_FLAG_PLLSAI1RDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_PLLSAI1RDY))) /*!< PLLSAI1 Ready flag */
-#define RCC_FLAG_PLLSAI2RDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_PLLSAI2RDY))) /*!< PLLSAI2 Ready flag */
+#define RCC_FLAG_MSIRDY ((uint32_t)((CR_REG_INDEX << 5U) | POSITION_VAL(RCC_CR_MSIRDY))) /*!< MSI Ready flag */
+#define RCC_FLAG_HSIRDY ((uint32_t)((CR_REG_INDEX << 5U) | POSITION_VAL(RCC_CR_HSIRDY))) /*!< HSI Ready flag */
+#define RCC_FLAG_HSERDY ((uint32_t)((CR_REG_INDEX << 5U) | POSITION_VAL(RCC_CR_HSERDY))) /*!< HSE Ready flag */
+#define RCC_FLAG_PLLRDY ((uint32_t)((CR_REG_INDEX << 5U) | POSITION_VAL(RCC_CR_PLLRDY))) /*!< PLL Ready flag */
+#define RCC_FLAG_PLLSAI1RDY ((uint32_t)((CR_REG_INDEX << 5U) | POSITION_VAL(RCC_CR_PLLSAI1RDY))) /*!< PLLSAI1 Ready flag */
+#if defined(RCC_PLLSAI2_SUPPORT)
+#define RCC_FLAG_PLLSAI2RDY ((uint32_t)((CR_REG_INDEX << 5U) | POSITION_VAL(RCC_CR_PLLSAI2RDY))) /*!< PLLSAI2 Ready flag */
+#endif /* RCC_PLLSAI2_SUPPORT */
/* Flags in the BDCR register */
-#define RCC_FLAG_LSERDY ((uint8_t)((BDCR_REG_INDEX << 5) | POSITION_VAL(RCC_BDCR_LSERDY))) /*!< LSE Ready flag */
-#define RCC_FLAG_LSECSSD ((uint8_t)((BDCR_REG_INDEX << 5) | POSITION_VAL(RCC_BDCR_LSECSSD))) /*!< LSE Clock Security System Interrupt flag */
+#define RCC_FLAG_LSERDY ((uint32_t)((BDCR_REG_INDEX << 5U) | POSITION_VAL(RCC_BDCR_LSERDY))) /*!< LSE Ready flag */
+#define RCC_FLAG_LSECSSD ((uint32_t)((BDCR_REG_INDEX << 5U) | POSITION_VAL(RCC_BDCR_LSECSSD))) /*!< LSE Clock Security System Interrupt flag */
/* Flags in the CSR register */
-#define RCC_FLAG_LSIRDY ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_LSIRDY))) /*!< LSI Ready flag */
-#define RCC_FLAG_RMVF ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_RMVF))) /*!< Remove reset flag */
-#define RCC_FLAG_FWRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_FWRSTF))) /*!< Firewall reset flag */
-#define RCC_FLAG_OBLRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_OBLRSTF))) /*!< Option Byte Loader reset flag */
-#define RCC_FLAG_PINRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_PINRSTF))) /*!< PIN reset flag */
-#define RCC_FLAG_BORRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_BORRSTF))) /*!< BOR reset flag */
-#define RCC_FLAG_SFTRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_SFTRSTF))) /*!< Software Reset flag */
-#define RCC_FLAG_IWDGRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_IWDGRSTF))) /*!< Independent Watchdog reset flag */
-#define RCC_FLAG_WWDGRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_WWDGRSTF))) /*!< Window watchdog reset flag */
-#define RCC_FLAG_LPWRRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_LPWRRSTF))) /*!< Low-Power reset flag */
+#define RCC_FLAG_LSIRDY ((uint32_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_LSIRDY))) /*!< LSI Ready flag */
+#define RCC_FLAG_RMVF ((uint32_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_RMVF))) /*!< Remove reset flag */
+#define RCC_FLAG_FWRST ((uint32_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_FWRSTF))) /*!< Firewall reset flag */
+#define RCC_FLAG_OBLRST ((uint32_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_OBLRSTF))) /*!< Option Byte Loader reset flag */
+#define RCC_FLAG_PINRST ((uint32_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_PINRSTF))) /*!< PIN reset flag */
+#define RCC_FLAG_BORRST ((uint32_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_BORRSTF))) /*!< BOR reset flag */
+#define RCC_FLAG_SFTRST ((uint32_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_SFTRSTF))) /*!< Software Reset flag */
+#define RCC_FLAG_IWDGRST ((uint32_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_IWDGRSTF))) /*!< Independent Watchdog reset flag */
+#define RCC_FLAG_WWDGRST ((uint32_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_WWDGRSTF))) /*!< Window watchdog reset flag */
+#define RCC_FLAG_LPWRRST ((uint32_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_LPWRRSTF))) /*!< Low-Power reset flag */
+
+#if defined(RCC_HSI48_SUPPORT)
+/* Flags in the CRRCR register */
+#define RCC_FLAG_HSI48RDY ((uint32_t)((CRRCR_REG_INDEX << 5U) | POSITION_VAL(RCC_CRRCR_HSI48RDY))) /*!< HSI48 Ready flag */
+#endif /* RCC_HSI48_SUPPORT */
/**
* @}
*/
@@ -490,11 +575,9 @@
/** @defgroup RCC_LSEDrive_Config LSE Drive Config
* @{
*/
-#define RCC_LSEDRIVE_LOW ((uint32_t)0x00000000) /*!< LSE low drive capability */
-#define RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_1 /*!< LSE medium low drive capability */
- /* Workaround implementation on medium low */
-#define RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_0 /*!< LSE medium high drive capability */
- /* Workaround implementation on medium high */
+#define RCC_LSEDRIVE_LOW ((uint32_t)0x00000000U) /*!< LSE low drive capability */
+#define RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_0 /*!< LSE medium low drive capability */
+#define RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_1 /*!< LSE medium high drive capability */
#define RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< LSE high drive capability */
/**
* @}
@@ -503,7 +586,7 @@
/** @defgroup RCC_Stop_WakeUpClock Wake-Up from STOP Clock
* @{
*/
-#define RCC_STOP_WAKEUPCLOCK_MSI ((uint32_t)0x00000000) /*!< MSI selection after wake-up from STOP */
+#define RCC_STOP_WAKEUPCLOCK_MSI ((uint32_t)0x00000000U) /*!< MSI selection after wake-up from STOP */
#define RCC_STOP_WAKEUPCLOCK_HSI RCC_CFGR_STOPWUCK /*!< HSI selection after wake-up from STOP */
/**
* @}
@@ -567,6 +650,7 @@
UNUSED(tmpreg); \
} while(0)
+
#define __HAL_RCC_DMA1_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN)
#define __HAL_RCC_DMA2_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN)
@@ -581,7 +665,7 @@
* @}
*/
-/** @defgroup RCC_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
+/** @defgroup RCC_AHB2_Peripheral_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
* @brief Enable or disable the AHB2 peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
@@ -613,6 +697,7 @@
UNUSED(tmpreg); \
} while(0)
+#if defined(GPIOD)
#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN); \
@@ -620,7 +705,9 @@
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN); \
UNUSED(tmpreg); \
} while(0)
-
+#endif /* GPIOD */
+
+#if defined(GPIOE)
#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN); \
@@ -628,7 +715,9 @@
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN); \
UNUSED(tmpreg); \
} while(0)
-
+#endif /* GPIOE */
+
+#if defined(GPIOF)
#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN); \
@@ -636,7 +725,9 @@
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN); \
UNUSED(tmpreg); \
} while(0)
-
+#endif /* GPIOF */
+
+#if defined(GPIOG)
#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN); \
@@ -644,6 +735,7 @@
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN); \
UNUSED(tmpreg); \
} while(0)
+#endif /* GPIOG */
#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
@@ -653,6 +745,16 @@
UNUSED(tmpreg); \
} while(0)
+#if defined(USB_OTG_FS)
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN); \
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* USB_OTG_FS */
+
#define __HAL_RCC_ADC_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN); \
@@ -661,6 +763,16 @@
UNUSED(tmpreg); \
} while(0)
+#if defined(AES)
+#define __HAL_RCC_AES_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN); \
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* AES */
+
#define __HAL_RCC_RNG_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN); \
@@ -669,24 +781,41 @@
UNUSED(tmpreg); \
} while(0)
+
#define __HAL_RCC_GPIOA_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOAEN)
#define __HAL_RCC_GPIOB_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOBEN)
#define __HAL_RCC_GPIOC_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOCEN)
+#if defined(GPIOD)
#define __HAL_RCC_GPIOD_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN)
-
+#endif /* GPIOD */
+
+#if defined(GPIOE)
#define __HAL_RCC_GPIOE_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN)
-
+#endif /* GPIOE */
+
+#if defined(GPIOF)
#define __HAL_RCC_GPIOF_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN)
-
+#endif /* GPIOF */
+
+#if defined(GPIOG)
#define __HAL_RCC_GPIOG_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN)
+#endif /* GPIOG */
#define __HAL_RCC_GPIOH_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOHEN)
+#if defined(USB_OTG_FS)
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN);
+#endif /* USB_OTG_FS */
+
#define __HAL_RCC_ADC_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN)
+#if defined(AES)
+#define __HAL_RCC_AES_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN);
+#endif /* AES */
+
#define __HAL_RCC_RNG_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN)
/**
@@ -701,6 +830,7 @@
* @{
*/
+#if defined(FMC_BANK1)
#define __HAL_RCC_FMC_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); \
@@ -708,7 +838,9 @@
tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); \
UNUSED(tmpreg); \
} while(0)
-
+#endif /* FMC_BANK1 */
+
+#if defined(QUADSPI)
#define __HAL_RCC_QSPI_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN); \
@@ -716,10 +848,16 @@
tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN); \
UNUSED(tmpreg); \
} while(0)
-
+#endif /* QUADSPI */
+
+
+#if defined(FMC_BANK1)
#define __HAL_RCC_FMC_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN)
-
+#endif /* FMC_BANK1 */
+
+#if defined(QUADSPI)
#define __HAL_RCC_QSPI_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN)
+#endif /* QUADSPI */
/**
* @}
@@ -741,6 +879,7 @@
UNUSED(tmpreg); \
} while(0)
+#if defined(TIM3)
#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN); \
@@ -748,7 +887,9 @@
tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN); \
UNUSED(tmpreg); \
} while(0)
-
+#endif /* TIM3 */
+
+#if defined(TIM4)
#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN); \
@@ -756,7 +897,9 @@
tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN); \
UNUSED(tmpreg); \
} while(0)
-
+#endif /* TIM4 */
+
+#if defined(TIM5)
#define __HAL_RCC_TIM5_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN); \
@@ -764,6 +907,7 @@
tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN); \
UNUSED(tmpreg); \
} while(0)
+#endif /* TIM5 */
#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
@@ -781,6 +925,26 @@
UNUSED(tmpreg); \
} while(0)
+#if defined(LCD)
+#define __HAL_RCC_LCD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN); \
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* LCD */
+
+#if defined(RCC_APB1ENR1_RTCAPBEN)
+#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN); \
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* RCC_APB1ENR1_RTCAPBEN */
+
#define __HAL_RCC_WWDG_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_WWDGEN); \
@@ -789,6 +953,7 @@
UNUSED(tmpreg); \
} while(0)
+#if defined(SPI2)
#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN); \
@@ -796,6 +961,7 @@
tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN); \
UNUSED(tmpreg); \
} while(0)
+#endif /* SPI2 */
#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
@@ -813,6 +979,7 @@
UNUSED(tmpreg); \
} while(0)
+#if defined(USART3)
#define __HAL_RCC_USART3_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN); \
@@ -820,7 +987,9 @@
tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN); \
UNUSED(tmpreg); \
} while(0)
-
+#endif /* USART3 */
+
+#if defined(UART4)
#define __HAL_RCC_UART4_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN); \
@@ -828,7 +997,9 @@
tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN); \
UNUSED(tmpreg); \
} while(0)
-
+#endif /* UART4 */
+
+#if defined(UART5)
#define __HAL_RCC_UART5_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN); \
@@ -836,6 +1007,7 @@
tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN); \
UNUSED(tmpreg); \
} while(0)
+#endif /* UART5 */
#define __HAL_RCC_I2C1_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
@@ -845,6 +1017,7 @@
UNUSED(tmpreg); \
} while(0)
+#if defined(I2C2)
#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN); \
@@ -852,6 +1025,7 @@
tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN); \
UNUSED(tmpreg); \
} while(0)
+#endif /* I2C2 */
#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
@@ -861,6 +1035,16 @@
UNUSED(tmpreg); \
} while(0)
+#if defined(CRS)
+#define __HAL_RCC_CRS_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN); \
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* CRS */
+
#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN); \
@@ -869,6 +1053,16 @@
UNUSED(tmpreg); \
} while(0)
+#if defined(USB)
+#define __HAL_RCC_USB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN); \
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* USB */
+
#define __HAL_RCC_PWR_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN); \
@@ -925,40 +1119,71 @@
UNUSED(tmpreg); \
} while(0)
+
#define __HAL_RCC_TIM2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN)
+#if defined(TIM3)
#define __HAL_RCC_TIM3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN)
-
+#endif /* TIM3 */
+
+#if defined(TIM4)
#define __HAL_RCC_TIM4_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN)
-
+#endif /* TIM4 */
+
+#if defined(TIM5)
#define __HAL_RCC_TIM5_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN)
+#endif /* TIM5 */
#define __HAL_RCC_TIM6_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN)
#define __HAL_RCC_TIM7_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN)
-#define __HAL_RCC_WWDG_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_WWDGEN)
-
+#if defined(LCD)
+#define __HAL_RCC_LCD_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN);
+#endif /* LCD */
+
+#if defined(RCC_APB1ENR1_RTCAPBEN)
+#define __HAL_RCC_RTCAPB_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN);
+#endif /* RCC_APB1ENR1_RTCAPBEN */
+
+#if defined(SPI2)
#define __HAL_RCC_SPI2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN)
+#endif /* SPI2 */
#define __HAL_RCC_SPI3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN)
#define __HAL_RCC_USART2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN)
+#if defined(USART3)
#define __HAL_RCC_USART3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN)
-
+#endif /* USART3 */
+
+#if defined(UART4)
#define __HAL_RCC_UART4_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN)
-
+#endif /* UART4 */
+
+#if defined(UART5)
#define __HAL_RCC_UART5_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN)
+#endif /* UART5 */
#define __HAL_RCC_I2C1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1EN)
+#if defined(I2C2)
#define __HAL_RCC_I2C2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN)
+#endif /* I2C2 */
#define __HAL_RCC_I2C3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN)
+#if defined(CRS)
+#define __HAL_RCC_CRS_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN);
+#endif /* CRS */
+
#define __HAL_RCC_CAN1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN)
+#if defined(USB)
+#define __HAL_RCC_USB_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN);
+#endif /* USB */
+
#define __HAL_RCC_PWR_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN)
#define __HAL_RCC_DAC1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_DAC1EN)
@@ -1001,6 +1226,7 @@
UNUSED(tmpreg); \
} while(0)
+#if defined(SDMMC1) && defined(RCC_APB2ENR_SDMMC1EN)
#define __HAL_RCC_SDMMC1_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN); \
@@ -1008,6 +1234,7 @@
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN); \
UNUSED(tmpreg); \
} while(0)
+#endif /* SDMMC1 && RCC_APB2ENR_SDMMC1EN */
#define __HAL_RCC_TIM1_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
@@ -1025,6 +1252,7 @@
UNUSED(tmpreg); \
} while(0)
+#if defined(TIM8)
#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN); \
@@ -1032,6 +1260,7 @@
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN); \
UNUSED(tmpreg); \
} while(0)
+#endif /* TIM8 */
#define __HAL_RCC_USART1_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
@@ -1058,6 +1287,7 @@
UNUSED(tmpreg); \
} while(0)
+#if defined(TIM17)
#define __HAL_RCC_TIM17_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN); \
@@ -1065,6 +1295,7 @@
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN); \
UNUSED(tmpreg); \
} while(0)
+#endif /* TIM17 */
#define __HAL_RCC_SAI1_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
@@ -1074,6 +1305,7 @@
UNUSED(tmpreg); \
} while(0)
+#if defined(SAI2)
#define __HAL_RCC_SAI2_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN); \
@@ -1081,24 +1313,32 @@
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN); \
UNUSED(tmpreg); \
} while(0)
-
-#define __HAL_RCC_DFSDM_CLK_ENABLE() do { \
+#endif /* SAI2 */
+
+#if defined(DFSDM1_Filter0)
+#define __HAL_RCC_DFSDM1_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDMEN); \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN); \
/* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDMEN); \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN); \
UNUSED(tmpreg); \
} while(0)
+#endif /* DFSDM1_Filter0 */
+
#define __HAL_RCC_SYSCFG_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN)
+#if defined(SDMMC1) && defined(RCC_APB2ENR_SDMMC1EN)
#define __HAL_RCC_SDMMC1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN)
+#endif /* SDMMC1 && RCC_APB2ENR_SDMMC1EN */
#define __HAL_RCC_TIM1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN)
#define __HAL_RCC_SPI1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN)
+#if defined(TIM8)
#define __HAL_RCC_TIM8_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN)
+#endif /* TIM8 */
#define __HAL_RCC_USART1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN)
@@ -1106,13 +1346,19 @@
#define __HAL_RCC_TIM16_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN)
+#if defined(TIM17)
#define __HAL_RCC_TIM17_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN)
+#endif /* TIM17 */
#define __HAL_RCC_SAI1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN)
+#if defined(SAI2)
#define __HAL_RCC_SAI2_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN)
-
-#define __HAL_RCC_DFSDM_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDMEN)
+#endif /* SAI2 */
+
+#if defined(DFSDM1_Filter0)
+#define __HAL_RCC_DFSDM1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN)
+#endif /* DFSDM1_Filter0 */
/**
* @}
@@ -1136,6 +1382,7 @@
#define __HAL_RCC_TSC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_TSCEN) != RESET)
+
#define __HAL_RCC_DMA1_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN) == RESET)
#define __HAL_RCC_DMA2_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN) == RESET)
@@ -1164,38 +1411,71 @@
#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOCEN) != RESET)
+#if defined(GPIOD)
#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN) != RESET)
-
+#endif /* GPIOD */
+
+#if defined(GPIOE)
#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN) != RESET)
-
+#endif /* GPIOE */
+
+#if defined(GPIOF)
#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN) != RESET)
-
+#endif /* GPIOF */
+
+#if defined(GPIOG)
#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN) != RESET)
+#endif /* GPIOG */
#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOHEN) != RESET)
+#if defined(USB_OTG_FS)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN) != RESET)
+#endif /* USB_OTG_FS */
+
#define __HAL_RCC_ADC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN) != RESET)
+#if defined(AES)
+#define __HAL_RCC_AES_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN) != RESET)
+#endif /* AES */
+
#define __HAL_RCC_RNG_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN) != RESET)
+
#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOAEN) == RESET)
#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOBEN) == RESET)
#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOCEN) == RESET)
+#if defined(GPIOD)
#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN) == RESET)
-
+#endif /* GPIOD */
+
+#if defined(GPIOE)
#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN) == RESET)
-
+#endif /* GPIOE */
+
+#if defined(GPIOF)
#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN) == RESET)
-
+#endif /* GPIOF */
+
+#if defined(GPIOG)
#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN) == RESET)
+#endif /* GPIOG */
#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOHEN) == RESET)
+#if defined(USB_OTG_FS)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN) == RESET)
+#endif /* USB_OTG_FS */
+
#define __HAL_RCC_ADC_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN) == RESET)
+#if defined(AES)
+#define __HAL_RCC_AES_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN) == RESET)
+#endif /* AES */
+
#define __HAL_RCC_RNG_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN) == RESET)
/**
@@ -1210,13 +1490,21 @@
* @{
*/
+#if defined(FMC_BANK1)
#define __HAL_RCC_FMC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN) != RESET)
-
+#endif /* FMC_BANK1 */
+
+#if defined(QUADSPI)
#define __HAL_RCC_QSPI_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN) != RESET)
-
+#endif /* QUADSPI */
+
+#if defined(FMC_BANK1)
#define __HAL_RCC_FMC_IS_CLK_DISABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN) == RESET)
-
+#endif /* FMC_BANK1 */
+
+#if defined(QUADSPI)
#define __HAL_RCC_QSPI_IS_CLK_DISABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN) == RESET)
+#endif /* QUADSPI */
/**
* @}
@@ -1232,38 +1520,70 @@
#define __HAL_RCC_TIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN) != RESET)
+#if defined(TIM3)
#define __HAL_RCC_TIM3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN) != RESET)
-
+#endif /* TIM3 */
+
+#if defined(TIM4)
#define __HAL_RCC_TIM4_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN) != RESET)
-
+#endif /* TIM4 */
+
+#if defined(TIM5)
#define __HAL_RCC_TIM5_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN) != RESET)
+#endif /* TIM5 */
#define __HAL_RCC_TIM6_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN) != RESET)
#define __HAL_RCC_TIM7_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN) != RESET)
+#if defined(LCD)
+#define __HAL_RCC_LCD_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN) != RESET)
+#endif /* LCD */
+
+#if defined(RCC_APB1ENR1_RTCAPBEN)
+#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN) != RESET)
+#endif /* RCC_APB1ENR1_RTCAPBEN */
+
#define __HAL_RCC_WWDG_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_WWDGEN) != RESET)
+#if defined(SPI2)
#define __HAL_RCC_SPI2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN) != RESET)
+#endif /* SPI2 */
#define __HAL_RCC_SPI3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN) != RESET)
#define __HAL_RCC_USART2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN) != RESET)
+#if defined(USART3)
#define __HAL_RCC_USART3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN) != RESET)
-
+#endif /* USART3 */
+
+#if defined(UART4)
#define __HAL_RCC_UART4_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN) != RESET)
-
+#endif /* UART4 */
+
+#if defined(UART5)
#define __HAL_RCC_UART5_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN) != RESET)
+#endif /* UART5 */
#define __HAL_RCC_I2C1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1EN) != RESET)
+#if defined(I2C2)
#define __HAL_RCC_I2C2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN) != RESET)
+#endif /* I2C2 */
#define __HAL_RCC_I2C3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN) != RESET)
+#if defined(CRS)
+#define __HAL_RCC_CRS_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN) != RESET)
+#endif /* CRS */
+
#define __HAL_RCC_CAN1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN) != RESET)
+#if defined(USB)
+#define __HAL_RCC_USB_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN) != RESET)
+#endif /* USB */
+
#define __HAL_RCC_PWR_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN) != RESET)
#define __HAL_RCC_DAC1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_DAC1EN) != RESET)
@@ -1278,40 +1598,73 @@
#define __HAL_RCC_LPTIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPTIM2EN) != RESET)
+
#define __HAL_RCC_TIM2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN) == RESET)
+#if defined(TIM3)
#define __HAL_RCC_TIM3_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN) == RESET)
-
+#endif /* TIM3 */
+
+#if defined(TIM4)
#define __HAL_RCC_TIM4_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN) == RESET)
-
+#endif /* TIM4 */
+
+#if defined(TIM5)
#define __HAL_RCC_TIM5_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN) == RESET)
+#endif /* TIM5 */
#define __HAL_RCC_TIM6_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN) == RESET)
#define __HAL_RCC_TIM7_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN) == RESET)
+#if defined(LCD)
+#define __HAL_RCC_LCD_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN) == RESET)
+#endif /* LCD */
+
+#if defined(RCC_APB1ENR1_RTCAPBEN)
+#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN) == RESET)
+#endif /* RCC_APB1ENR1_RTCAPBEN */
+
#define __HAL_RCC_WWDG_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_WWDGEN) == RESET)
+#if defined(SPI2)
#define __HAL_RCC_SPI2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN) == RESET)
+#endif /* SPI2 */
#define __HAL_RCC_SPI3_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN) == RESET)
#define __HAL_RCC_USART2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN) == RESET)
+#if defined(USART3)
#define __HAL_RCC_USART3_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN) == RESET)
-
+#endif /* USART3 */
+
+#if defined(UART4)
#define __HAL_RCC_UART4_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN) == RESET)
-
+#endif /* UART4 */
+
+#if defined(UART5)
#define __HAL_RCC_UART5_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN) == RESET)
+#endif /* UART5 */
#define __HAL_RCC_I2C1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1EN) == RESET)
+#if defined(I2C2)
#define __HAL_RCC_I2C2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN) == RESET)
+#endif /* I2C2 */
#define __HAL_RCC_I2C3_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN) == RESET)
+#if defined(CRS)
+#define __HAL_RCC_CRS_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN) == RESET)
+#endif /* CRS */
+
#define __HAL_RCC_CAN1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN) == RESET)
+#if defined(USB)
+#define __HAL_RCC_USB_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN) == RESET)
+#endif /* USB */
+
#define __HAL_RCC_PWR_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN) == RESET)
#define __HAL_RCC_DAC1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_DAC1EN) == RESET)
@@ -1342,13 +1695,17 @@
#define __HAL_RCC_FIREWALL_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_FWEN) != RESET)
+#if defined(SDMMC1) && defined(RCC_APB2ENR_SDMMC1EN)
#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN) != RESET)
+#endif /* SDMMC1 && RCC_APB2ENR_SDMMC1EN */
#define __HAL_RCC_TIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN) != RESET)
#define __HAL_RCC_SPI1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN) != RESET)
+#if defined(TIM8)
#define __HAL_RCC_TIM8_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN) != RESET)
+#endif /* TIM8 */
#define __HAL_RCC_USART1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN) != RESET)
@@ -1356,23 +1713,34 @@
#define __HAL_RCC_TIM16_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN) != RESET)
+#if defined(TIM17)
#define __HAL_RCC_TIM17_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN) != RESET)
+#endif /* TIM17 */
#define __HAL_RCC_SAI1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN) != RESET)
+#if defined(SAI2)
#define __HAL_RCC_SAI2_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN) != RESET)
-
-#define __HAL_RCC_DFSDM_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDMEN) != RESET)
+#endif /* SAI2 */
+
+#if defined(DFSDM1_Filter0)
+#define __HAL_RCC_DFSDM1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN) != RESET)
+#endif /* DFSDM1_Filter0 */
+
#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN) == RESET)
+#if defined(SDMMC1) && defined(RCC_APB2ENR_SDMMC1EN)
#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN) == RESET)
+#endif /* SDMMC1 && RCC_APB2ENR_SDMMC1EN */
#define __HAL_RCC_TIM1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN) == RESET)
#define __HAL_RCC_SPI1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN) == RESET)
+#if defined(TIM8)
#define __HAL_RCC_TIM8_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN) == RESET)
+#endif /* TIM8 */
#define __HAL_RCC_USART1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN) == RESET)
@@ -1380,13 +1748,19 @@
#define __HAL_RCC_TIM16_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN) == RESET)
+#if defined(TIM17)
#define __HAL_RCC_TIM17_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN) == RESET)
+#endif /* TIM17 */
#define __HAL_RCC_SAI1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN) == RESET)
+#if defined(SAI2)
#define __HAL_RCC_SAI2_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN) == RESET)
-
-#define __HAL_RCC_DFSDM_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDMEN) == RESET)
+#endif /* SAI2 */
+
+#if defined(DFSDM1_Filter0)
+#define __HAL_RCC_DFSDM1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN) == RESET)
+#endif /* DFSDM1_Filter0 */
/**
* @}
@@ -1396,7 +1770,7 @@
* @brief Force or release AHB1 peripheral reset.
* @{
*/
-#define __HAL_RCC_AHB1_FORCE_RESET() WRITE_REG(RCC->AHB1RSTR, 0xFFFFFFFF)
+#define __HAL_RCC_AHB1_FORCE_RESET() WRITE_REG(RCC->AHB1RSTR, 0xFFFFFFFFU)
#define __HAL_RCC_DMA1_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA1RST)
@@ -1408,7 +1782,8 @@
#define __HAL_RCC_TSC_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_TSCRST)
-#define __HAL_RCC_AHB1_RELEASE_RESET() WRITE_REG(RCC->AHB1RSTR, 0x00000000)
+
+#define __HAL_RCC_AHB1_RELEASE_RESET() WRITE_REG(RCC->AHB1RSTR, 0x00000000U)
#define __HAL_RCC_DMA1_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA1RST)
@@ -1428,7 +1803,7 @@
* @brief Force or release AHB2 peripheral reset.
* @{
*/
-#define __HAL_RCC_AHB2_FORCE_RESET() WRITE_REG(RCC->AHB2RSTR, 0xFFFFFFFF)
+#define __HAL_RCC_AHB2_FORCE_RESET() WRITE_REG(RCC->AHB2RSTR, 0xFFFFFFFFU)
#define __HAL_RCC_GPIOA_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOARST)
@@ -1436,21 +1811,38 @@
#define __HAL_RCC_GPIOC_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOCRST)
+#if defined(GPIOD)
#define __HAL_RCC_GPIOD_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIODRST)
-
+#endif /* GPIOD */
+
+#if defined(GPIOE)
#define __HAL_RCC_GPIOE_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOERST)
-
+#endif /* GPIOE */
+
+#if defined(GPIOF)
#define __HAL_RCC_GPIOF_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOFRST)
-
+#endif /* GPIOF */
+
+#if defined(GPIOG)
#define __HAL_RCC_GPIOG_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOGRST)
+#endif /* GPIOG */
#define __HAL_RCC_GPIOH_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOHRST)
+#if defined(USB_OTG_FS)
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_OTGFSRST)
+#endif /* USB_OTG_FS */
+
#define __HAL_RCC_ADC_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_ADCRST)
+#if defined(AES)
+#define __HAL_RCC_AES_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_AESRST)
+#endif /* AES */
+
#define __HAL_RCC_RNG_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_RNGRST)
-#define __HAL_RCC_AHB2_RELEASE_RESET() WRITE_REG(RCC->AHB2RSTR, 0x00000000)
+
+#define __HAL_RCC_AHB2_RELEASE_RESET() WRITE_REG(RCC->AHB2RSTR, 0x00000000U)
#define __HAL_RCC_GPIOA_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOARST)
@@ -1458,18 +1850,34 @@
#define __HAL_RCC_GPIOC_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOCRST)
+#if defined(GPIOD)
#define __HAL_RCC_GPIOD_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIODRST)
-
+#endif /* GPIOD */
+
+#if defined(GPIOE)
#define __HAL_RCC_GPIOE_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOERST)
-
+#endif /* GPIOE */
+
+#if defined(GPIOF)
#define __HAL_RCC_GPIOF_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOFRST)
-
+#endif /* GPIOF */
+
+#if defined(GPIOG)
#define __HAL_RCC_GPIOG_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOGRST)
+#endif /* GPIOG */
#define __HAL_RCC_GPIOH_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOHRST)
+#if defined(USB_OTG_FS)
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_OTGFSRST)
+#endif /* USB_OTG_FS */
+
#define __HAL_RCC_ADC_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_ADCRST)
+#if defined(AES)
+#define __HAL_RCC_AES_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_AESRST)
+#endif /* AES */
+
#define __HAL_RCC_RNG_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_RNGRST)
/**
@@ -1480,17 +1888,26 @@
* @brief Force or release AHB3 peripheral reset.
* @{
*/
-#define __HAL_RCC_AHB3_FORCE_RESET() WRITE_REG(RCC->AHB3RSTR, 0xFFFFFFFF)
-
+#define __HAL_RCC_AHB3_FORCE_RESET() WRITE_REG(RCC->AHB3RSTR, 0xFFFFFFFFU)
+
+#if defined(FMC_BANK1)
#define __HAL_RCC_FMC_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_FMCRST)
-
+#endif /* FMC_BANK1 */
+
+#if defined(QUADSPI)
#define __HAL_RCC_QSPI_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_QSPIRST)
-
-#define __HAL_RCC_AHB3_RELEASE_RESET() WRITE_REG(RCC->AHB3RSTR, 0x00000000)
-
+#endif /* QUADSPI */
+
+
+#define __HAL_RCC_AHB3_RELEASE_RESET() WRITE_REG(RCC->AHB3RSTR, 0x00000000U)
+
+#if defined(FMC_BANK1)
#define __HAL_RCC_FMC_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_FMCRST)
-
+#endif /* FMC_BANK1 */
+
+#if defined(QUADSPI)
#define __HAL_RCC_QSPI_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_QSPIRST)
+#endif /* QUADSPI */
/**
* @}
@@ -1500,40 +1917,68 @@
* @brief Force or release APB1 peripheral reset.
* @{
*/
-#define __HAL_RCC_APB1_FORCE_RESET() WRITE_REG(RCC->APB1RSTR1, 0xFFFFFFFF)
+#define __HAL_RCC_APB1_FORCE_RESET() WRITE_REG(RCC->APB1RSTR1, 0xFFFFFFFFU)
#define __HAL_RCC_TIM2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM2RST)
+#if defined(TIM3)
#define __HAL_RCC_TIM3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM3RST)
-
+#endif /* TIM3 */
+
+#if defined(TIM4)
#define __HAL_RCC_TIM4_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM4RST)
-
+#endif /* TIM4 */
+
+#if defined(TIM5)
#define __HAL_RCC_TIM5_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM5RST)
+#endif /* TIM5 */
#define __HAL_RCC_TIM6_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM6RST)
#define __HAL_RCC_TIM7_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM7RST)
+#if defined(LCD)
+#define __HAL_RCC_LCD_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_LCDRST)
+#endif /* LCD */
+
+#if defined(SPI2)
#define __HAL_RCC_SPI2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI2RST)
+#endif /* SPI2 */
#define __HAL_RCC_SPI3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI3RST)
#define __HAL_RCC_USART2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART2RST)
+#if defined(USART3)
#define __HAL_RCC_USART3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART3RST)
-
+#endif /* USART3 */
+
+#if defined(UART4)
#define __HAL_RCC_UART4_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART4RST)
-
+#endif /* UART4 */
+
+#if defined(UART5)
#define __HAL_RCC_UART5_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART5RST)
+#endif /* UART5 */
#define __HAL_RCC_I2C1_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C1RST)
+#if defined(I2C2)
#define __HAL_RCC_I2C2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C2RST)
+#endif /* I2C2 */
#define __HAL_RCC_I2C3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C3RST)
+#if defined(CRS)
+#define __HAL_RCC_CRS_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CRSRST)
+#endif /* CRS */
+
#define __HAL_RCC_CAN1_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CAN1RST)
+#if defined(USB)
+#define __HAL_RCC_USB_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USBFSRST)
+#endif /* USB */
+
#define __HAL_RCC_PWR_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_PWRRST)
#define __HAL_RCC_DAC1_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_DAC1RST)
@@ -1548,40 +1993,69 @@
#define __HAL_RCC_LPTIM2_FORCE_RESET() SET_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_LPTIM2RST)
-#define __HAL_RCC_APB1_RELEASE_RESET() WRITE_REG(RCC->APB1RSTR1, 0x00000000)
+
+#define __HAL_RCC_APB1_RELEASE_RESET() WRITE_REG(RCC->APB1RSTR1, 0x00000000U)
#define __HAL_RCC_TIM2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM2RST)
+#if defined(TIM3)
#define __HAL_RCC_TIM3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM3RST)
-
+#endif /* TIM3 */
+
+#if defined(TIM4)
#define __HAL_RCC_TIM4_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM4RST)
-
+#endif /* TIM4 */
+
+#if defined(TIM5)
#define __HAL_RCC_TIM5_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM5RST)
+#endif /* TIM5 */
#define __HAL_RCC_TIM6_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM6RST)
#define __HAL_RCC_TIM7_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM7RST)
+#if defined(LCD)
+#define __HAL_RCC_LCD_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_LCDRST)
+#endif /* LCD */
+
+#if defined(SPI2)
#define __HAL_RCC_SPI2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI2RST)
+#endif /* SPI2 */
#define __HAL_RCC_SPI3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI3RST)
#define __HAL_RCC_USART2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART2RST)
+#if defined(USART3)
#define __HAL_RCC_USART3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART3RST)
-
+#endif /* USART3 */
+
+#if defined(UART4)
#define __HAL_RCC_UART4_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART4RST)
-
+#endif /* UART4 */
+
+#if defined(UART5)
#define __HAL_RCC_UART5_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART5RST)
+#endif /* UART5 */
#define __HAL_RCC_I2C1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C1RST)
+#if defined(I2C2)
#define __HAL_RCC_I2C2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C2RST)
+#endif /* I2C2 */
#define __HAL_RCC_I2C3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C3RST)
+#if defined(CRS)
+#define __HAL_RCC_CRS_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CRSRST)
+#endif /* CRS */
+
#define __HAL_RCC_CAN1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CAN1RST)
+#if defined(USB)
+#define __HAL_RCC_USB_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USBFSRST)
+#endif /* USB */
+
#define __HAL_RCC_PWR_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_PWRRST)
#define __HAL_RCC_DAC1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_DAC1RST)
@@ -1604,17 +2078,21 @@
* @brief Force or release APB2 peripheral reset.
* @{
*/
-#define __HAL_RCC_APB2_FORCE_RESET() WRITE_REG(RCC->APB2RSTR, 0xFFFFFFFF)
+#define __HAL_RCC_APB2_FORCE_RESET() WRITE_REG(RCC->APB2RSTR, 0xFFFFFFFFU)
#define __HAL_RCC_SYSCFG_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SYSCFGRST)
+#if defined(SDMMC1) && defined(RCC_APB2RSTR_SDMMC1RST)
#define __HAL_RCC_SDMMC1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SDMMC1RST)
+#endif /* SDMMC1 && RCC_APB2RSTR_SDMMC1RST */
#define __HAL_RCC_TIM1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM1RST)
#define __HAL_RCC_SPI1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SPI1RST)
+#if defined(TIM8)
#define __HAL_RCC_TIM8_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM8RST)
+#endif /* TIM8 */
#define __HAL_RCC_USART1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_USART1RST)
@@ -1622,25 +2100,36 @@
#define __HAL_RCC_TIM16_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM16RST)
+#if defined(TIM17)
#define __HAL_RCC_TIM17_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM17RST)
+#endif /* TIM17 */
#define __HAL_RCC_SAI1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI1RST)
+#if defined(SAI2)
#define __HAL_RCC_SAI2_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI2RST)
-
-#define __HAL_RCC_DFSDM_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_DFSDMRST)
-
-#define __HAL_RCC_APB2_RELEASE_RESET() WRITE_REG(RCC->APB2RSTR, 0x00000000)
+#endif /* SAI2 */
+
+#if defined(DFSDM1_Filter0)
+#define __HAL_RCC_DFSDM1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_DFSDM1RST)
+#endif /* DFSDM1_Filter0 */
+
+
+#define __HAL_RCC_APB2_RELEASE_RESET() WRITE_REG(RCC->APB2RSTR, 0x00000000U)
#define __HAL_RCC_SYSCFG_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SYSCFGRST)
+#if defined(SDMMC1) && defined(RCC_APB2RSTR_SDMMC1RST)
#define __HAL_RCC_SDMMC1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SDMMC1RST)
+#endif /* SDMMC1 && RCC_APB2RSTR_SDMMC1RST */
#define __HAL_RCC_TIM1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM1RST)
#define __HAL_RCC_SPI1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SPI1RST)
+#if defined(TIM8)
#define __HAL_RCC_TIM8_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM8RST)
+#endif /* TIM8 */
#define __HAL_RCC_USART1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_USART1RST)
@@ -1648,13 +2137,19 @@
#define __HAL_RCC_TIM16_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM16RST)
+#if defined(TIM17)
#define __HAL_RCC_TIM17_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM17RST)
+#endif /* TIM17 */
#define __HAL_RCC_SAI1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI1RST)
+#if defined(SAI2)
#define __HAL_RCC_SAI2_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI2RST)
-
-#define __HAL_RCC_DFSDM_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_DFSDMRST)
+#endif /* SAI2 */
+
+#if defined(DFSDM1_Filter0)
+#define __HAL_RCC_DFSDM1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_DFSDM1RST)
+#endif /* DFSDM1_Filter0 */
/**
* @}
@@ -1681,6 +2176,7 @@
#define __HAL_RCC_TSC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_TSCSMEN)
+
#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA1SMEN)
#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2SMEN)
@@ -1712,41 +2208,74 @@
#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN)
+#if defined(GPIOD)
#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN)
-
+#endif /* GPIOD */
+
+#if defined(GPIOE)
#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN)
-
+#endif /* GPIOE */
+
+#if defined(GPIOF)
#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOFSMEN)
-
+#endif /* GPIOF */
+
+#if defined(GPIOG)
#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOGSMEN)
+#endif /* GPIOG */
#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN)
#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM2SMEN)
+#if defined(USB_OTG_FS)
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OTGFSSMEN)
+#endif /* USB_OTG_FS */
+
#define __HAL_RCC_ADC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN)
+#if defined(AES)
+#define __HAL_RCC_AES_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AESSMEN)
+#endif /* AES */
+
#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_RNGSMEN)
+
#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOASMEN)
#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOBSMEN)
#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN)
+#if defined(GPIOD)
#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN)
-
+#endif /* GPIOD */
+
+#if defined(GPIOE)
#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN)
-
+#endif /* GPIOE */
+
+#if defined(GPIOF)
#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOFSMEN)
-
+#endif /* GPIOF */
+
+#if defined(GPIOG)
#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOGSMEN)
+#endif /* GPIOG */
#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN)
+#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM2SMEN)
+
+#if defined(USB_OTG_FS)
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OTGFSSMEN)
+#endif /* USB_OTG_FS */
+
#define __HAL_RCC_ADC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN)
-#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM2SMEN)
+#if defined(AES)
+#define __HAL_RCC_AES_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AESSMEN)
+#endif /* AES */
#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_RNGSMEN)
@@ -1763,13 +2292,22 @@
* @{
*/
+#if defined(QUADSPI)
#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QSPISMEN)
-
+#endif /* QUADSPI */
+
+#if defined(FMC_BANK1)
#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FMCSMEN)
-
+#endif /* FMC_BANK1 */
+
+
+#if defined(QUADSPI)
#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QSPISMEN)
-
+#endif /* QUADSPI */
+
+#if defined(FMC_BANK1)
#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FMCSMEN)
+#endif /* FMC_BANK1 */
/**
* @}
@@ -1786,38 +2324,70 @@
#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN)
+#if defined(TIM3)
#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM3SMEN)
-
+#endif /* TIM3 */
+
+#if defined(TIM4)
#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM4SMEN)
-
+#endif /* TIM4 */
+
+#if defined(TIM5)
#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM5SMEN)
+#endif /* TIM5 */
#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM6SMEN)
#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM7SMEN)
+#if defined(LCD)
+#define __HAL_RCC_LCD_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN)
+#endif /* LCD */
+
+#if defined(RCC_APB1SMENR1_RTCAPBSMEN)
+#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN)
+#endif /* RCC_APB1SMENR1_RTCAPBSMEN */
+
#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN)
+#if defined(SPI2)
#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN)
+#endif /* SPI2 */
#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI3SMEN)
#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART2SMEN)
+#if defined(USART3)
#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART3SMEN)
-
+#endif /* USART3 */
+
+#if defined(UART4)
#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART4SMEN)
-
+#endif /* UART4 */
+
+#if defined(UART5)
#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART5SMEN)
+#endif /* UART5 */
#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN)
+#if defined(I2C2)
#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C2SMEN)
+#endif /* I2C2 */
#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN)
+#if defined(CRS)
+#define __HAL_RCC_CRS_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN)
+#endif /* CRS */
+
#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN1SMEN)
+#if defined(USB)
+#define __HAL_RCC_USB_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBFSSMEN)
+#endif /* USB */
+
#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_PWRSMEN)
#define __HAL_RCC_DAC1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_DAC1SMEN)
@@ -1832,40 +2402,73 @@
#define __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPTIM2SMEN)
+
#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN)
+#if defined(TIM3)
#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM3SMEN)
-
+#endif /* TIM3 */
+
+#if defined(TIM4)
#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM4SMEN)
-
+#endif /* TIM4 */
+
+#if defined(TIM5)
#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM5SMEN)
+#endif /* TIM5 */
#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM6SMEN)
#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM7SMEN)
+#if defined(LCD)
+#define __HAL_RCC_LCD_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN)
+#endif /* LCD */
+
+#if defined(RCC_APB1SMENR1_RTCAPBSMEN)
+#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN)
+#endif /* RCC_APB1SMENR1_RTCAPBSMEN */
+
#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN)
+#if defined(SPI2)
#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN)
+#endif /* SPI2 */
#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI3SMEN)
#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART2SMEN)
+#if defined(USART3)
#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART3SMEN)
-
+#endif /* USART3 */
+
+#if defined(UART4)
#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART4SMEN)
-
+#endif /* UART4 */
+
+#if defined(UART5)
#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART5SMEN)
+#endif /* UART5 */
#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN)
+#if defined(I2C2)
#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C2SMEN)
+#endif /* I2C2 */
#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN)
+#if defined(CRS)
+#define __HAL_RCC_CRS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN)
+#endif /* CRS */
+
#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN1SMEN)
+#if defined(USB)
+#define __HAL_RCC_USB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBFSSMEN)
+#endif /* USB */
+
#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_PWRSMEN)
#define __HAL_RCC_DAC1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_DAC1SMEN)
@@ -1895,13 +2498,17 @@
#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SYSCFGSMEN)
+#if defined(SDMMC1) && defined(RCC_APB2SMENR_SDMMC1SMEN)
#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SDMMC1SMEN)
+#endif /* SDMMC1 && RCC_APB2SMENR_SDMMC1SMEN */
#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN)
#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN)
+#if defined(TIM8)
#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM8SMEN)
+#endif /* TIM8 */
#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN)
@@ -1909,23 +2516,34 @@
#define __HAL_RCC_TIM16_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN)
+#if defined(TIM17)
#define __HAL_RCC_TIM17_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN)
+#endif /* TIM17 */
#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN)
+#if defined(SAI2)
#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI2SMEN)
-
-#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDMSMEN)
+#endif /* SAI2 */
+
+#if defined(DFSDM1_Filter0)
+#define __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDM1SMEN)
+#endif /* DFSDM1_Filter0 */
+
#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SYSCFGSMEN)
+#if defined(SDMMC1) && defined(RCC_APB2SMENR_SDMMC1SMEN)
#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SDMMC1SMEN)
+#endif /* SDMMC1 && RCC_APB2SMENR_SDMMC1SMEN */
#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN)
#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN)
+#if defined(TIM8)
#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM8SMEN)
+#endif /* TIM8 */
#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN)
@@ -1933,13 +2551,19 @@
#define __HAL_RCC_TIM16_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN)
+#if defined(TIM17)
#define __HAL_RCC_TIM17_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN)
+#endif /* TIM17 */
#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN)
+#if defined(SAI2)
#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI2SMEN)
-
-#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDMSMEN)
+#endif /* SAI2 */
+
+#if defined(DFSDM1_Filter0)
+#define __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDM1SMEN)
+#endif /* DFSDM1_Filter0 */
/**
* @}
@@ -1966,6 +2590,7 @@
#define __HAL_RCC_TSC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_TSCSMEN) != RESET)
+
#define __HAL_RCC_DMA1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA1SMEN) == RESET)
#define __HAL_RCC_DMA2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2SMEN) == RESET)
@@ -1997,41 +2622,74 @@
#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN) != RESET)
+#if defined(GPIOD)
#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN) != RESET)
-
+#endif /* GPIOD */
+
+#if defined(GPIOE)
#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) != RESET)
-
+#endif /* GPIOE */
+
+#if defined(GPIOF)
#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOFSMEN) != RESET)
-
+#endif /* GPIOF */
+
+#if defined(GPIOG)
#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOGSMEN) != RESET)
+#endif /* GPIOG */
#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) != RESET)
#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM2SMEN) != RESET)
+#if defined(USB_OTG_FS)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OTGFSSMEN) != RESET)
+#endif /* USB_OTG_FS */
+
#define __HAL_RCC_ADC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) != RESET)
+#if defined(AES)
+#define __HAL_RCC_AES_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AESSMEN) != RESET)
+#endif /* AES */
+
#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_RNGSMEN) != RESET)
+
#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOASMEN) == RESET)
#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOBSMEN) == RESET)
#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN) == RESET)
+#if defined(GPIOD)
#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN) == RESET)
-
+#endif /* GPIOD */
+
+#if defined(GPIOE)
#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) == RESET)
-
+#endif /* GPIOE */
+
+#if defined(GPIOF)
#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOFSMEN) == RESET)
-
+#endif /* GPIOF */
+
+#if defined(GPIOG)
#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOGSMEN) == RESET)
+#endif /* GPIOG */
#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) == RESET)
+#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM2SMEN) == RESET)
+
+#if defined(USB_OTG_FS)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OTGFSSMEN) == RESET)
+#endif /* USB_OTG_FS */
+
#define __HAL_RCC_ADC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) == RESET)
-#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM2SMEN) == RESET)
+#if defined(AES)
+#define __HAL_RCC_AES_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AESSMEN) == RESET)
+#endif /* AES */
#define __HAL_RCC_RNG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_RNGSMEN) == RESET)
@@ -2048,13 +2706,21 @@
* @{
*/
+#if defined(QUADSPI)
#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QSPISMEN) != RESET)
-
+#endif /* QUADSPI */
+
+#if defined(FMC_BANK1)
#define __HAL_RCC_FMC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FMCSMEN) != RESET)
-
+#endif /* FMC_BANK1 */
+
+#if defined(QUADSPI)
#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QSPISMEN) == RESET)
-
+#endif /* QUADSPI */
+
+#if defined(FMC_BANK1)
#define __HAL_RCC_FMC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FMCSMEN) == RESET)
+#endif /* FMC_BANK1 */
/**
* @}
@@ -2071,38 +2737,70 @@
#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN) != RESET)
+#if defined(TIM3)
#define __HAL_RCC_TIM3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM3SMEN) != RESET)
-
+#endif /* TIM3 */
+
+#if defined(TIM4)
#define __HAL_RCC_TIM4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM4SMEN) != RESET)
-
+#endif /* TIM4 */
+
+#if defined(TIM5)
#define __HAL_RCC_TIM5_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM5SMEN) != RESET)
+#endif /* TIM5 */
#define __HAL_RCC_TIM6_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM6SMEN) != RESET)
#define __HAL_RCC_TIM7_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM7SMEN) != RESET)
+#if defined(LCD)
+#define __HAL_RCC_LCD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN) != RESET)
+#endif /* LCD */
+
+#if defined(RCC_APB1SMENR1_RTCAPBSMEN)
+#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN) != RESET)
+#endif /* RCC_APB1SMENR1_RTCAPBSMEN */
+
#define __HAL_RCC_WWDG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN) != RESET)
+#if defined(SPI2)
#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN) != RESET)
+#endif /* SPI2 */
#define __HAL_RCC_SPI3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI3SMEN) != RESET)
#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART2SMEN) != RESET)
+#if defined(USART3)
#define __HAL_RCC_USART3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART3SMEN) != RESET)
-
+#endif /* USART3 */
+
+#if defined(UART4)
#define __HAL_RCC_UART4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART4SMEN) != RESET)
-
+#endif /* UART4 */
+
+#if defined(UART5)
#define __HAL_RCC_UART5_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART5SMEN) != RESET)
+#endif /* UART5 */
#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN) != RESET)
+#if defined(I2C2)
#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C2SMEN) != RESET)
+#endif /* I2C2 */
#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN) != RESET)
+#if defined(CRS)
+#define __HAL_RCC_CRS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN) != RESET)
+#endif /* CRS */
+
#define __HAL_RCC_CAN1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN1SMEN) != RESET)
+#if defined(USB)
+#define __HAL_RCC_USB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBFSSMEN) != RESET)
+#endif /* USB */
+
#define __HAL_RCC_PWR_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_PWRSMEN) != RESET)
#define __HAL_RCC_DAC1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_DAC1SMEN) != RESET)
@@ -2117,40 +2815,73 @@
#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPTIM2SMEN) != RESET)
+
#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN) == RESET)
+#if defined(TIM3)
#define __HAL_RCC_TIM3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM3SMEN) == RESET)
-
+#endif /* TIM3 */
+
+#if defined(TIM4)
#define __HAL_RCC_TIM4_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM4SMEN) == RESET)
-
+#endif /* TIM4 */
+
+#if defined(TIM5)
#define __HAL_RCC_TIM5_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM5SMEN) == RESET)
+#endif /* TIM5 */
#define __HAL_RCC_TIM6_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM6SMEN) == RESET)
#define __HAL_RCC_TIM7_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM7SMEN) == RESET)
+#if defined(LCD)
+#define __HAL_RCC_LCD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN) == RESET)
+#endif /* LCD */
+
+#if defined(RCC_APB1SMENR1_RTCAPBSMEN)
+#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN) == RESET)
+#endif /* RCC_APB1SMENR1_RTCAPBSMEN */
+
#define __HAL_RCC_WWDG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN) == RESET)
+#if defined(SPI2)
#define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN) == RESET)
+#endif /* SPI2 */
#define __HAL_RCC_SPI3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI3SMEN) == RESET)
#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART2SMEN) == RESET)
+#if defined(USART3)
#define __HAL_RCC_USART3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART3SMEN) == RESET)
-
+#endif /* USART3 */
+
+#if defined(UART4)
#define __HAL_RCC_UART4_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART4SMEN) == RESET)
-
+#endif /* UART4 */
+
+#if defined(UART5)
#define __HAL_RCC_UART5_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART5SMEN) == RESET)
+#endif /* UART5 */
#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN) == RESET)
+#if defined(I2C2)
#define __HAL_RCC_I2C2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C2SMEN) == RESET)
+#endif /* I2C2 */
#define __HAL_RCC_I2C3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN) == RESET)
+#if defined(CRS)
+#define __HAL_RCC_CRS_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN) == RESET)
+#endif /* CRS */
+
#define __HAL_RCC_CAN1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN1SMEN) == RESET)
+#if defined(USB)
+#define __HAL_RCC_USB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBFSSMEN) == RESET)
+#endif /* USB */
+
#define __HAL_RCC_PWR_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_PWRSMEN) == RESET)
#define __HAL_RCC_DAC1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_DAC1SMEN) == RESET)
@@ -2180,13 +2911,17 @@
#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SYSCFGSMEN) != RESET)
+#if defined(SDMMC1) && defined(RCC_APB2SMENR_SDMMC1SMEN)
#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SDMMC1SMEN) != RESET)
+#endif /* SDMMC1 && RCC_APB2SMENR_SDMMC1SMEN */
#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) != RESET)
#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) != RESET)
+#if defined(TIM8)
#define __HAL_RCC_TIM8_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM8SMEN) != RESET)
+#endif /* TIM8 */
#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) != RESET)
@@ -2194,23 +2929,34 @@
#define __HAL_RCC_TIM16_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN) != RESET)
+#if defined(TIM17)
#define __HAL_RCC_TIM17_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN) != RESET)
+#endif /* TIM17 */
#define __HAL_RCC_SAI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) != RESET)
+#if defined(SAI2)
#define __HAL_RCC_SAI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI2SMEN) != RESET)
-
-#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDMSMEN) != RESET)
+#endif /* SAI2 */
+
+#if defined(DFSDM1_Filter0)
+#define __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDM1SMEN) != RESET)
+#endif /* DFSDM1_Filter0 */
+
#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SYSCFGSMEN) == RESET)
+#if defined(SDMMC1) && defined(RCC_APB2SMENR_SDMMC1SMEN)
#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SDMMC1SMEN) == RESET)
+#endif /* SDMMC1 && RCC_APB2SMENR_SDMMC1SMEN */
#define __HAL_RCC_TIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) == RESET)
#define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) == RESET)
+#if defined(TIM8)
#define __HAL_RCC_TIM8_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM8SMEN) == RESET)
+#endif /* TIM8 */
#define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) == RESET)
@@ -2218,13 +2964,19 @@
#define __HAL_RCC_TIM16_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN) == RESET)
+#if defined(TIM17)
#define __HAL_RCC_TIM17_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN) == RESET)
+#endif /* TIM17 */
#define __HAL_RCC_SAI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) == RESET)
+#if defined(SAI2)
#define __HAL_RCC_SAI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI2SMEN) == RESET)
-
-#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDMSMEN) == RESET)
+#endif /* SAI2 */
+
+#if defined(DFSDM1_Filter0)
+#define __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDM1SMEN) == RESET)
+#endif /* DFSDM1_Filter0 */
/**
* @}
@@ -2268,7 +3020,7 @@
* @}
*/
-/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
+/** @brief Macros to enable or disable the Internal High Speed 16MHz oscillator (HSI).
* @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
* It is used (enabled by hardware) as system clock source after startup
* from Reset, wakeup from STOP and STANDBY mode, or in case of failure
@@ -2288,7 +3040,7 @@
#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION)
-/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+/** @brief Macro to adjust the Internal High Speed 16MHz oscillator (HSI) calibration value.
* @note The calibration is used to compensate for the variations in voltage
* and temperature that influence the frequency of the internal HSI RC.
* @param __HSICALIBRATIONVALUE__: specifies the calibration trimming value
@@ -2369,18 +3121,18 @@
* @note The MSI clock range after reset can be modified on the fly.
* @param __MSIRANGEVALUE__: specifies the MSI clock range.
* This parameter must be one of the following values:
- * @arg RCC_MSIRANGE_0: MSI clock is around 100 KHz
- * @arg RCC_MSIRANGE_1: MSI clock is around 200 KHz
- * @arg RCC_MSIRANGE_2: MSI clock is around 400 KHz
- * @arg RCC_MSIRANGE_3: MSI clock is around 800 KHz
- * @arg RCC_MSIRANGE_4: MSI clock is around 1 MHz
- * @arg RCC_MSIRANGE_5: MSI clock is around 2MHz
- * @arg RCC_MSIRANGE_6: MSI clock is around 4MHz (default after Reset)
- * @arg RCC_MSIRANGE_7: MSI clock is around 8 MHz
- * @arg RCC_MSIRANGE_8: MSI clock is around 16 MHz
- * @arg RCC_MSIRANGE_9: MSI clock is around 24 MHz
- * @arg RCC_MSIRANGE_10: MSI clock is around 32 MHz
- * @arg RCC_MSIRANGE_11: MSI clock is around 48 MHz
+ * @arg @ref RCC_MSIRANGE_0 MSI clock is around 100 KHz
+ * @arg @ref RCC_MSIRANGE_1 MSI clock is around 200 KHz
+ * @arg @ref RCC_MSIRANGE_2 MSI clock is around 400 KHz
+ * @arg @ref RCC_MSIRANGE_3 MSI clock is around 800 KHz
+ * @arg @ref RCC_MSIRANGE_4 MSI clock is around 1 MHz
+ * @arg @ref RCC_MSIRANGE_5 MSI clock is around 2MHz
+ * @arg @ref RCC_MSIRANGE_6 MSI clock is around 4MHz (default after Reset)
+ * @arg @ref RCC_MSIRANGE_7 MSI clock is around 8 MHz
+ * @arg @ref RCC_MSIRANGE_8 MSI clock is around 16 MHz
+ * @arg @ref RCC_MSIRANGE_9 MSI clock is around 24 MHz
+ * @arg @ref RCC_MSIRANGE_10 MSI clock is around 32 MHz
+ * @arg @ref RCC_MSIRANGE_11 MSI clock is around 48 MHz
* @retval None
*/
#define __HAL_RCC_MSI_RANGE_CONFIG(__MSIRANGEVALUE__) \
@@ -2394,10 +3146,10 @@
* After Standby its frequency can be selected between 4 possible values (1, 2, 4 or 8 MHz).
* @param __MSIRANGEVALUE__: specifies the MSI clock range.
* This parameter must be one of the following values:
- * @arg RCC_MSIRANGE_4: MSI clock is around 1 MHz
- * @arg RCC_MSIRANGE_5: MSI clock is around 2MHz
- * @arg RCC_MSIRANGE_6: MSI clock is around 4MHz (default after Reset)
- * @arg RCC_MSIRANGE_7: MSI clock is around 8 MHz
+ * @arg @ref RCC_MSIRANGE_4 MSI clock is around 1 MHz
+ * @arg @ref RCC_MSIRANGE_5 MSI clock is around 2MHz
+ * @arg @ref RCC_MSIRANGE_6 MSI clock is around 4MHz (default after Reset)
+ * @arg @ref RCC_MSIRANGE_7 MSI clock is around 8 MHz
* @retval None
*/
#define __HAL_RCC_MSI_STANDBY_RANGE_CONFIG(__MSIRANGEVALUE__) \
@@ -2406,18 +3158,18 @@
/** @brief Macro to get the Internal Multi Speed oscillator (MSI) clock range in run mode
* @retval MSI clock range.
* This parameter must be one of the following values:
- * @arg RCC_MSIRANGE_0: MSI clock is around 100 KHz
- * @arg RCC_MSIRANGE_1: MSI clock is around 200 KHz
- * @arg RCC_MSIRANGE_2: MSI clock is around 400 KHz
- * @arg RCC_MSIRANGE_3: MSI clock is around 800 KHz
- * @arg RCC_MSIRANGE_4: MSI clock is around 1 MHz
- * @arg RCC_MSIRANGE_5: MSI clock is around 2MHz
- * @arg RCC_MSIRANGE_6: MSI clock is around 4MHz (default after Reset)
- * @arg RCC_MSIRANGE_7: MSI clock is around 8 MHz
- * @arg RCC_MSIRANGE_8: MSI clock is around 16 MHz
- * @arg RCC_MSIRANGE_9: MSI clock is around 24 MHz
- * @arg RCC_MSIRANGE_10: MSI clock is around 32 MHz
- * @arg RCC_MSIRANGE_11: MSI clock is around 48 MHz
+ * @arg @ref RCC_MSIRANGE_0 MSI clock is around 100 KHz
+ * @arg @ref RCC_MSIRANGE_1 MSI clock is around 200 KHz
+ * @arg @ref RCC_MSIRANGE_2 MSI clock is around 400 KHz
+ * @arg @ref RCC_MSIRANGE_3 MSI clock is around 800 KHz
+ * @arg @ref RCC_MSIRANGE_4 MSI clock is around 1 MHz
+ * @arg @ref RCC_MSIRANGE_5 MSI clock is around 2MHz
+ * @arg @ref RCC_MSIRANGE_6 MSI clock is around 4MHz (default after Reset)
+ * @arg @ref RCC_MSIRANGE_7 MSI clock is around 8 MHz
+ * @arg @ref RCC_MSIRANGE_8 MSI clock is around 16 MHz
+ * @arg @ref RCC_MSIRANGE_9 MSI clock is around 24 MHz
+ * @arg @ref RCC_MSIRANGE_10 MSI clock is around 32 MHz
+ * @arg @ref RCC_MSIRANGE_11 MSI clock is around 48 MHz
*/
#define __HAL_RCC_GET_MSI_RANGE() \
((READ_BIT(RCC->CR, RCC_CR_MSIRGSEL) != RESET) ? \
@@ -2454,10 +3206,10 @@
* function.
* @param __STATE__: specifies the new state of the HSE.
* This parameter can be one of the following values:
- * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
+ * @arg @ref RCC_HSE_OFF Turn OFF the HSE oscillator, HSERDY flag goes low after
* 6 HSE oscillator clock cycles.
- * @arg RCC_HSE_ON: turn ON the HSE oscillator.
- * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock.
+ * @arg @ref RCC_HSE_ON Turn ON the HSE oscillator.
+ * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock.
* @retval None
*/
#define __HAL_RCC_HSE_CONFIG(__STATE__) \
@@ -2468,7 +3220,6 @@
} \
else if((__STATE__) == RCC_HSE_BYPASS) \
{ \
- CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \
SET_BIT(RCC->CR, RCC_CR_HSEBYP); \
SET_BIT(RCC->CR, RCC_CR_HSEON); \
} \
@@ -2493,10 +3244,10 @@
* is stable and can be used to clock the RTC.
* @param __STATE__: specifies the new state of the LSE.
* This parameter can be one of the following values:
- * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
+ * @arg @ref RCC_LSE_OFF Turn OFF the LSE oscillator, LSERDY flag goes low after
* 6 LSE oscillator clock cycles.
- * @arg RCC_LSE_ON: turn ON the LSE oscillator.
- * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock.
+ * @arg @ref RCC_LSE_ON Turn ON the LSE oscillator.
+ * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock.
* @retval None
*/
#define __HAL_RCC_LSE_CONFIG(__STATE__) \
@@ -2505,14 +3256,8 @@
{ \
SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
} \
- else if((__STATE__) == RCC_LSE_OFF) \
- { \
- CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
- CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
- } \
else if((__STATE__) == RCC_LSE_BYPASS) \
{ \
- CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
} \
@@ -2523,6 +3268,21 @@
} \
} while(0)
+#if defined(RCC_HSI48_SUPPORT)
+
+/** @brief Macros to enable or disable the Internal High Speed 48MHz oscillator (HSI48).
+ * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes.
+ * @note After enabling the HSI48, the application software should wait on HSI48RDY
+ * flag to be set indicating that HSI48 clock is stable.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+#define __HAL_RCC_HSI48_ENABLE() SET_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON)
+
+#define __HAL_RCC_HSI48_DISABLE() CLEAR_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON)
+
+#endif /* RCC_HSI48_SUPPORT */
+
/** @brief Macros to configure the RTC clock (RTCCLK).
* @note As the RTC clock configuration bits are in the Backup domain and write
* access is denied to this domain after reset, you have to enable write
@@ -2534,9 +3294,10 @@
*
* @param __RTC_CLKSOURCE__: specifies the RTC clock source.
* This parameter can be one of the following values:
- * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock.
- * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock.
- * @arg RCC_RTCCLKSOURCE_HSE_DIV32: HSE clock divided by 32 selected
+ * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock.
+ * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock.
+ * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock.
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected
*
* @note If the LSE or LSI is used as RTC clock source, the RTC continues to
* work in STOP and STANDBY modes, and can be used as wakeup source.
@@ -2552,9 +3313,10 @@
/** @brief Macro to get the RTC clock source.
* @retval The returned value can be one of the following:
- * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock.
- * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock.
- * @arg RCC_RTCCLKSOURCE_HSE_DIV32: HSE clock divided by 32 selected
+ * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock.
+ * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock.
+ * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock.
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected
*/
#define __HAL_RCC_GET_RTC_SOURCE() ((uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)))
@@ -2574,10 +3336,10 @@
* @note This function must be used only when the main PLL is disabled.
* @param __PLLSOURCE__: specifies the PLL entry clock source.
* This parameter can be one of the following values:
- * @arg RCC_PLLSOURCE_NONE: No clock selected as PLL clock entry
- * @arg RCC_PLLSOURCE_MSI: MSI oscillator clock selected as PLL clock entry
- * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
- * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @arg @ref RCC_PLLSOURCE_NONE No clock selected as PLL clock entry
+ * @arg @ref RCC_PLLSOURCE_MSI MSI oscillator clock selected as PLL clock entry
+ * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry
+ * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry
* @note This clock source is common for the main PLL and audio PLL (PLLSAI1 and PLLSAI2).
* @retval None
*
@@ -2585,7 +3347,7 @@
#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) \
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__))
-/** @brief Macro to configure the PLL multiplication factor.
+/** @brief Macro to configure the PLL source division factor M.
* @note This function must be used only when the main PLL is disabled.
* @param __PLLM__: specifies the division factor for PLL VCO input clock
* This parameter must be a number between Min_Data = 1 and Max_Data = 8.
@@ -2604,10 +3366,10 @@
*
* @param __PLLSOURCE__: specifies the PLL entry clock source.
* This parameter can be one of the following values:
- * @arg RCC_PLLSOURCE_NONE: No clock selected as PLL clock entry
- * @arg RCC_PLLSOURCE_MSI: MSI oscillator clock selected as PLL clock entry
- * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
- * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @arg @ref RCC_PLLSOURCE_NONE No clock selected as PLL clock entry
+ * @arg @ref RCC_PLLSOURCE_MSI MSI oscillator clock selected as PLL clock entry
+ * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry
+ * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry
* @note This clock source is common for the main PLL and audio PLL (PLLSAI1 and PLLSAI2).
*
* @param __PLLM__: specifies the division factor for PLL VCO input clock.
@@ -2622,7 +3384,8 @@
* output frequency is between 64 and 344 MHz.
*
* @param __PLLP__: specifies the division factor for SAI clock.
- * This parameter must be a number in the range (7 or 17).
+ * This parameter must be a number in the range (7 or 17) for STM32L47x/STM32L48x
+ * else (2 to 31).
*
* @param __PLLQ__: specifies the division factor for OTG FS, SDMMC1 and RNG clocks.
* This parameter must be in the range (2, 4, 6 or 8).
@@ -2635,9 +3398,20 @@
* This parameter must be in the range (2, 4, 6 or 8).
* @retval None
*/
+#if defined(RCC_PLLP_DIV_2_31_SUPPORT)
+
#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__ ) \
- (RCC->PLLCFGR = (((__PLLM__) - 1) << 4U) | ((__PLLN__) << 8U) | (((__PLLP__) >> 4U ) << 17U) | \
- (__PLLSOURCE__) | ((((__PLLQ__) >> 1U) - 1) << 21U) | ((((__PLLR__) >> 1U) - 1) << 25U))
+ (RCC->PLLCFGR = (uint32_t)(((__PLLM__) - 1U) << 4U) | (uint32_t)((__PLLN__) << 8U) | \
+ (uint32_t)(__PLLSOURCE__) | (uint32_t)((((__PLLQ__) >> 1U) - 1U) << 21U) | (uint32_t)((((__PLLR__) >> 1U) - 1U) << 25U) | \
+ (uint32_t)((__PLLP__) << 27U))
+
+#else
+
+#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__ ) \
+ (RCC->PLLCFGR = (uint32_t)(((__PLLM__) - 1U) << 4U) | (uint32_t)((__PLLN__) << 8U) | (uint32_t)(((__PLLP__) >> 4U ) << 17U) | \
+ (uint32_t)(__PLLSOURCE__) | (uint32_t)((((__PLLQ__) >> 1U) - 1U) << 21U) | (uint32_t)((((__PLLR__) >> 1U) - 1U) << 25U))
+
+#endif /* RCC_PLLP_DIV_2_31_SUPPORT */
/** @brief Macro to get the oscillator used as PLL clock source.
* @retval The oscillator used as PLL clock source. The returned value can be one
@@ -2656,11 +3430,11 @@
* be stopped if used as System Clock.
* @param __PLLCLOCKOUT__: specifies the PLL clock to be output.
* This parameter can be one or a combination of the following values:
- * @arg RCC_PLL_SAI3CLK: This clock is used to generate an accurate clock to achieve
+ * @arg @ref RCC_PLL_SAI3CLK This clock is used to generate an accurate clock to achieve
* high-quality audio performance on SAI interface in case.
- * @arg RCC_PLL_48M1CLK: This Clock is used to generate the clock for the USB OTG FS (48 MHz),
+ * @arg @ref RCC_PLL_48M1CLK This Clock is used to generate the clock for the USB OTG FS (48 MHz),
* the random analog generator (<=48 MHz) and the SDMMC1 (<= 48 MHz).
- * @arg RCC_PLL_SYSCLK: This Clock is used to generate the high speed system clock (up to 80MHz)
+ * @arg @ref RCC_PLL_SYSCLK This Clock is used to generate the high speed system clock (up to 80MHz)
* @retval None
*/
#define __HAL_RCC_PLLCLKOUT_ENABLE(__PLLCLOCKOUT__) SET_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__))
@@ -2671,11 +3445,11 @@
* @brief Get clock output enable status (RCC_PLL_SYSCLK, RCC_PLL_48M1CLK, RCC_PLL_SAI3CLK)
* @param __PLLCLOCKOUT__: specifies the output PLL clock to be checked.
* This parameter can be one of the following values:
- * @arg RCC_PLL_SAI3CLK: This clock is used to generate an accurate clock to achieve
+ * @arg @ref RCC_PLL_SAI3CLK This clock is used to generate an accurate clock to achieve
* high-quality audio performance on SAI interface in case.
- * @arg RCC_PLL_48M1CLK: This Clock is used to generate the clock for the USB OTG FS (48 MHz),
+ * @arg @ref RCC_PLL_48M1CLK This Clock is used to generate the clock for the USB OTG FS (48 MHz),
* the random analog generator (<=48 MHz) and the SDMMC1 (<= 48 MHz).
- * @arg RCC_PLL_SYSCLK: This Clock is used to generate the high speed system clock (up to 80MHz)
+ * @arg @ref RCC_PLL_SYSCLK This Clock is used to generate the high speed system clock (up to 80MHz)
* @retval SET / RESET
*/
#define __HAL_RCC_GET_PLLCLKOUT_CONFIG(__PLLCLOCKOUT__) READ_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__))
@@ -2704,34 +3478,59 @@
#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS))
/**
- * @brief Macro to configures the External Low Speed oscillator (LSE) drive capability.
+ * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability.
* @note As the LSE is in the Backup domain and write access is denied to
* this domain after reset, you have to enable write access using
* HAL_PWR_EnableBkUpAccess() function before to configure the LSE
* (to be done once after reset).
* @param __LSEDRIVE__: specifies the new state of the LSE drive capability.
* This parameter can be one of the following values:
- * @arg RCC_LSEDRIVE_LOW: LSE oscillator low drive capability.
- * @arg RCC_LSEDRIVE_MEDIUMLOW: LSE oscillator medium low drive capability.
- * @arg RCC_LSEDRIVE_MEDIUMHIGH: LSE oscillator medium high drive capability.
- * @arg RCC_LSEDRIVE_HIGH: LSE oscillator high drive capability.
+ * @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability.
+ * @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability.
+ * @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability.
+ * @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability.
* @retval None
*/
#define __HAL_RCC_LSEDRIVE_CONFIG(__LSEDRIVE__) \
MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (uint32_t)(__LSEDRIVE__))
/**
- * @brief Macro to configures the wake up from stop clock.
+ * @brief Macro to configure the wake up from stop clock.
* @param __STOPWUCLK__: specifies the clock source used after wake up from stop.
* This parameter can be one of the following values:
- * @arg RCC_STOP_WAKEUPCLOCK_MSI: MSI selected as system clock source
- * @arg RCC_STOP_WAKEUPCLOCK_HSI: HSI selected as system clock source
+ * @arg @ref RCC_STOP_WAKEUPCLOCK_MSI MSI selected as system clock source
+ * @arg @ref RCC_STOP_WAKEUPCLOCK_HSI HSI selected as system clock source
* @retval None
*/
#define __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(__STOPWUCLK__) \
MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPWUCK, (__STOPWUCLK__))
+/** @brief Macro to configure the MCO clock.
+ * @param __MCOCLKSOURCE__ specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCO1SOURCE_NOCLOCK MCO output disabled
+ * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO source
+ * @arg @ref RCC_MCO1SOURCE_MSI MSI clock selected as MCO source
+ * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO source
+ * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO sourcee
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK Main PLL clock selected as MCO source
+ * @arg @ref RCC_MCO1SOURCE_LSI LSI clock selected as MCO source
+ * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO source
+ @if STM32L443xx
+ * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source for devices with HSI48
+ @endif
+ * @param __MCODIV__ specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1
+ * @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2
+ * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4
+ * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8
+ * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16
+ */
+#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
+
/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management
* @brief macros to manage the specified RCC Flags and interrupts.
* @{
@@ -2741,15 +3540,18 @@
* the selected interrupts).
* @param __INTERRUPT__: specifies the RCC interrupt sources to be enabled.
* This parameter can be any combination of the following values:
- * @arg RCC_IT_LSIRDY: LSI ready interrupt
- * @arg RCC_IT_LSERDY: LSE ready interrupt
- * @arg RCC_IT_MSIRDY: HSI ready interrupt
- * @arg RCC_IT_HSIRDY: HSI ready interrupt
- * @arg RCC_IT_HSERDY: HSE ready interrupt
- * @arg RCC_IT_PLLRDY: main PLL ready interrupt
- * @arg RCC_IT_PLLSAI1RDY: PLLSAI1 ready interrupt
- * @arg RCC_IT_PLLSAI2RDY: PLLSAI2 ready interrupt
- * @arg RCC_IT_LSECSS: Clock security system interrupt
+ * @arg @ref RCC_IT_LSIRDY LSI ready interrupt
+ * @arg @ref RCC_IT_LSERDY LSE ready interrupt
+ * @arg @ref RCC_IT_MSIRDY HSI ready interrupt
+ * @arg @ref RCC_IT_HSIRDY HSI ready interrupt
+ * @arg @ref RCC_IT_HSERDY HSE ready interrupt
+ * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt
+ * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt
+ * @arg @ref RCC_IT_PLLSAI2RDY PLLSAI2 ready interrupt for devices with PLLSAI2
+ * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt
+ @if STM32L443xx
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48
+ @endif
* @retval None
*/
#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) SET_BIT(RCC->CIER, (__INTERRUPT__))
@@ -2758,15 +3560,18 @@
* the selected interrupts).
* @param __INTERRUPT__: specifies the RCC interrupt sources to be disabled.
* This parameter can be any combination of the following values:
- * @arg RCC_IT_LSIRDY: LSI ready interrupt
- * @arg RCC_IT_LSERDY: LSE ready interrupt
- * @arg RCC_IT_MSIRDY: HSI ready interrupt
- * @arg RCC_IT_HSIRDY: HSI ready interrupt
- * @arg RCC_IT_HSERDY: HSE ready interrupt
- * @arg RCC_IT_PLLRDY: main PLL ready interrupt
- * @arg RCC_IT_PLLSAI1RDY: PLLSAI1 ready interrupt
- * @arg RCC_IT_PLLSAI2RDY: PLLSAI2 ready interrupt
- * @arg RCC_IT_LSECSS: Clock security system interrupt
+ * @arg @ref RCC_IT_LSIRDY LSI ready interrupt
+ * @arg @ref RCC_IT_LSERDY LSE ready interrupt
+ * @arg @ref RCC_IT_MSIRDY HSI ready interrupt
+ * @arg @ref RCC_IT_HSIRDY HSI ready interrupt
+ * @arg @ref RCC_IT_HSERDY HSE ready interrupt
+ * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt
+ * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt
+ * @arg @ref RCC_IT_PLLSAI2RDY PLLSAI2 ready interrupt for devices with PLLSAI2
+ * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt
+ @if STM32L443xx
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48
+ @endif
* @retval None
*/
#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(RCC->CIER, (__INTERRUPT__))
@@ -2775,16 +3580,19 @@
* bits to clear the selected interrupt pending bits.
* @param __INTERRUPT__: specifies the interrupt pending bit to clear.
* This parameter can be any combination of the following values:
- * @arg RCC_IT_LSIRDY: LSI ready interrupt
- * @arg RCC_IT_LSERDY: LSE ready interrupt
- * @arg RCC_IT_MSIRDY: MSI ready interrupt
- * @arg RCC_IT_HSIRDY: HSI ready interrupt
- * @arg RCC_IT_HSERDY: HSE ready interrupt
- * @arg RCC_IT_PLLRDY: main PLL ready interrupt
- * @arg RCC_IT_PLLSAI1RDY: PLLSAI1 ready interrupt
- * @arg RCC_IT_PLLSAI2RDY: PLLSAI2 ready interrupt
- * @arg RCC_IT_HSECSS: HSE Clock Security interrupt
- * @arg RCC_IT_LSECSS: Clock security system interrupt
+ * @arg @ref RCC_IT_LSIRDY LSI ready interrupt
+ * @arg @ref RCC_IT_LSERDY LSE ready interrupt
+ * @arg @ref RCC_IT_MSIRDY MSI ready interrupt
+ * @arg @ref RCC_IT_HSIRDY HSI ready interrupt
+ * @arg @ref RCC_IT_HSERDY HSE ready interrupt
+ * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt
+ * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt
+ * @arg @ref RCC_IT_PLLSAI2RDY PLLSAI2 ready interrupt for devices with PLLSAI2
+ * @arg @ref RCC_IT_CSS HSE Clock security system interrupt
+ * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt
+ @if STM32L443xx
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48
+ @endif
* @retval None
*/
#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (RCC->CICR = (__INTERRUPT__))
@@ -2792,19 +3600,22 @@
/** @brief Check whether the RCC interrupt has occurred or not.
* @param __INTERRUPT__: specifies the RCC interrupt source to check.
* This parameter can be one of the following values:
- * @arg RCC_IT_LSIRDY: LSI ready interrupt
- * @arg RCC_IT_LSERDY: LSE ready interrupt
- * @arg RCC_IT_MSIRDY: MSI ready interrupt
- * @arg RCC_IT_HSIRDY: HSI ready interrupt
- * @arg RCC_IT_HSERDY: HSE ready interrupt
- * @arg RCC_IT_PLLRDY: main PLL ready interrupt
- * @arg RCC_IT_PLLSAI1RDY: PLLSAI1 ready interrupt
- * @arg RCC_IT_PLLSAI2RDY: PLLSAI2 ready interrupt
- * @arg RCC_IT_HSECSS: HSE Clock Security interrupt
- * @arg RCC_IT_LSECSS: Clock security system interrupt
+ * @arg @ref RCC_IT_LSIRDY LSI ready interrupt
+ * @arg @ref RCC_IT_LSERDY LSE ready interrupt
+ * @arg @ref RCC_IT_MSIRDY MSI ready interrupt
+ * @arg @ref RCC_IT_HSIRDY HSI ready interrupt
+ * @arg @ref RCC_IT_HSERDY HSE ready interrupt
+ * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt
+ * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt
+ * @arg @ref RCC_IT_PLLSAI2RDY PLLSAI2 ready interrupt for devices with PLLSAI2
+ * @arg @ref RCC_IT_CSS HSE Clock security system interrupt
+ * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt
+ @if STM32L443xx
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48
+ @endif
* @retval The new state of __INTERRUPT__ (TRUE or FALSE).
*/
-#define __HAL_RCC_GET_IT_SOURCE(__INTERRUPT__) ((RCC->CIFR & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIFR & (__INTERRUPT__)) == (__INTERRUPT__))
/** @brief Set RMVF bit to clear the reset flags.
* The reset flags are: RCC_FLAG_FWRRST, RCC_FLAG_OBLRST, RCC_FLAG_PINRST, RCC_FLAG_BORRST,
@@ -2816,31 +3627,43 @@
/** @brief Check whether the selected RCC flag is set or not.
* @param __FLAG__: specifies the flag to check.
* This parameter can be one of the following values:
- * @arg RCC_FLAG_MSIRDY: MSI oscillator clock ready
- * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready
- * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready
- * @arg RCC_FLAG_PLLRDY: main PLL clock ready
- * @arg RCC_FLAG_PLLSAI2RDY: PLLSAI2 clock ready
- * @arg RCC_FLAG_PLLSAI1RDY: PLLSAI1 clock ready
- * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready
- * @arg RCC_FLAG_LSECSSD: Clock security system failure on LSE oscillator detection
- * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready
- * @arg RCC_FLAG_BORRST: BOR reset
- * @arg RCC_FLAG_OBLRST: OBLRST reset
- * @arg RCC_FLAG_PINRST: Pin reset
- * @arg RCC_FLAG_FWRST: FIREWALL reset
- * @arg RCC_FLAG_RMVF: Remove reset Flag
- * @arg RCC_FLAG_SFTRST: Software reset
- * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset
- * @arg RCC_FLAG_WWDGRST: Window Watchdog reset
- * @arg RCC_FLAG_LPWRRST: Low Power reset
+ * @arg @ref RCC_FLAG_MSIRDY MSI oscillator clock ready
+ * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready
+ * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready
+ * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready
+ * @arg @ref RCC_FLAG_PLLSAI1RDY PLLSAI1 clock ready
+ * @arg @ref RCC_FLAG_PLLSAI2RDY PLLSAI2 clock ready for devices with PLLSAI2
+ @if STM32L443xx
+ * @arg @ref RCC_FLAG_HSI48RDY HSI48 clock ready for devices with HSI48
+ @endif
+ * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready
+ * @arg @ref RCC_FLAG_LSECSSD Clock security system failure on LSE oscillator detection
+ * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready
+ * @arg @ref RCC_FLAG_BORRST BOR reset
+ * @arg @ref RCC_FLAG_OBLRST OBLRST reset
+ * @arg @ref RCC_FLAG_PINRST Pin reset
+ * @arg @ref RCC_FLAG_FWRST FIREWALL reset
+ * @arg @ref RCC_FLAG_RMVF Remove reset Flag
+ * @arg @ref RCC_FLAG_SFTRST Software reset
+ * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset
+ * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset
+ * @arg @ref RCC_FLAG_LPWRRST Low Power reset
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
-#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U) ? RCC->CR : \
- ((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR : \
- ((((__FLAG__) >> 5U) == 3U) ? RCC->CSR : RCC->CIFR))) & \
- ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK))) != 0) \
- ? 1 : 0)
+#if defined(RCC_HSI48_SUPPORT)
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U) ? RCC->CR : \
+ ((((__FLAG__) >> 5U) == 4U) ? RCC->CRRCR : \
+ ((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR : \
+ ((((__FLAG__) >> 5U) == 3U) ? RCC->CSR : RCC->CIFR)))) & \
+ ((uint32_t)1U << ((__FLAG__) & RCC_FLAG_MASK))) != RESET) \
+ ? 1U : 0U)
+#else
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U) ? RCC->CR : \
+ ((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR : \
+ ((((__FLAG__) >> 5U) == 3U) ? RCC->CSR : RCC->CIFR))) & \
+ ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK))) != RESET) \
+ ? 1U : 0U)
+#endif /* RCC_HSI48_SUPPORT */
/**
* @}
@@ -2855,11 +3678,14 @@
* @{
*/
/* Defines used for Flags */
-#define CR_REG_INDEX ((uint8_t)1)
-#define BDCR_REG_INDEX ((uint8_t)2)
-#define CSR_REG_INDEX ((uint8_t)3)
-
-#define RCC_FLAG_MASK ((uint8_t)0x1F)
+#define CR_REG_INDEX ((uint32_t)1U)
+#define BDCR_REG_INDEX ((uint32_t)2U)
+#define CSR_REG_INDEX ((uint32_t)3U)
+#if defined(RCC_HSI48_SUPPORT)
+#define CRRCR_REG_INDEX ((uint32_t)4U)
+#endif /* RCC_HSI48_SUPPORT */
+
+#define RCC_FLAG_MASK ((uint32_t)0x1FU)
/**
* @}
*/
@@ -2869,12 +3695,22 @@
* @{
*/
+#if defined(RCC_HSI48_SUPPORT)
+#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \
+ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \
+ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \
+ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) || \
+ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_MSI) == RCC_OSCILLATORTYPE_MSI) || \
+ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \
+ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE))
+#else
#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \
(((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \
(((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \
(((__OSCILLATOR__) & RCC_OSCILLATORTYPE_MSI) == RCC_OSCILLATORTYPE_MSI) || \
(((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \
(((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE))
+#endif /* RCC_HSI48_SUPPORT */
#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \
((__HSE__) == RCC_HSE_BYPASS))
@@ -2884,13 +3720,17 @@
#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON))
-#define IS_RCC_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= (uint32_t)31)
+#define IS_RCC_HSI_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= (uint32_t)31U)
#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON))
#define IS_RCC_MSI(__MSI__) (((__MSI__) == RCC_MSI_OFF) || ((__MSI__) == RCC_MSI_ON))
-#define IS_RCC_MSICALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= (uint32_t)255)
+#define IS_RCC_MSICALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= (uint32_t)255U)
+
+#if defined(RCC_HSI48_SUPPORT)
+#define IS_RCC_HSI48(__HSI48__) (((__HSI48__) == RCC_HSI48_OFF) || ((__HSI48__) == RCC_HSI48_ON))
+#endif /* RCC_HSI48_SUPPORT */
#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) ||((__PLL__) == RCC_PLL_OFF) || \
((__PLL__) == RCC_PLL_ON))
@@ -2900,26 +3740,32 @@
((__SOURCE__) == RCC_PLLSOURCE_HSI) || \
((__SOURCE__) == RCC_PLLSOURCE_HSE))
-#define IS_RCC_PLLM_VALUE(__VALUE__) ((__VALUE__) <= 8)
-
-#define IS_RCC_PLLN_VALUE(__VALUE__) ((8 <= (__VALUE__)) && ((__VALUE__) <= 86))
-
-#define IS_RCC_PLLP_VALUE(__VALUE__) (((__VALUE__) == 7) || ((__VALUE__) == 17) )
-
-#define IS_RCC_PLLQ_VALUE(__VALUE__) (((__VALUE__) == 2 ) || ((__VALUE__) == 4) || \
- ((__VALUE__) == 6) || ((__VALUE__) == 8))
-
-#define IS_RCC_PLLR_VALUE(__VALUE__) (((__VALUE__) == 2 ) || ((__VALUE__) == 4) || \
- ((__VALUE__) == 6) || ((__VALUE__) == 8))
+#define IS_RCC_PLLM_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 8U))
+
+#define IS_RCC_PLLN_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U))
+
+#if defined(RCC_PLLP_DIV_2_31_SUPPORT)
+#define IS_RCC_PLLP_VALUE(__VALUE__) (((__VALUE__) >= 2U) && ((__VALUE__) <= 31U))
+#else
+#define IS_RCC_PLLP_VALUE(__VALUE__) (((__VALUE__) == 7U) || ((__VALUE__) == 17U))
+#endif /*RCC_PLLP_DIV_2_31_SUPPORT */
+
+#define IS_RCC_PLLQ_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \
+ ((__VALUE__) == 6U) || ((__VALUE__) == 8U))
+
+#define IS_RCC_PLLR_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \
+ ((__VALUE__) == 6U) || ((__VALUE__) == 8U))
#define IS_RCC_PLLSAI1CLOCKOUT_VALUE(__VALUE__) (((((__VALUE__) & RCC_PLLSAI1_SAI1CLK) == RCC_PLLSAI1_SAI1CLK) || \
(((__VALUE__) & RCC_PLLSAI1_48M2CLK) == RCC_PLLSAI1_48M2CLK) || \
(((__VALUE__) & RCC_PLLSAI1_ADC1CLK) == RCC_PLLSAI1_ADC1CLK)) && \
- (((__VALUE__) & ~(RCC_PLLSAI1_SAI1CLK|RCC_PLLSAI1_48M2CLK|RCC_PLLSAI1_ADC1CLK)) == 0))
-
-#define IS_RCC_PLLSAI2CLOCKOUT_VALUE(__VALUE__) (((((__VALUE__) & RCC_PLLSAI2_SAI2CLK) == RCC_PLLSAI2_SAI2CLK ) || \
+ (((__VALUE__) & ~(RCC_PLLSAI1_SAI1CLK|RCC_PLLSAI1_48M2CLK|RCC_PLLSAI1_ADC1CLK)) == 0U))
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+#define IS_RCC_PLLSAI2CLOCKOUT_VALUE(__VALUE__) (((((__VALUE__) & RCC_PLLSAI2_SAI2CLK) == RCC_PLLSAI2_SAI2CLK) || \
(((__VALUE__) & RCC_PLLSAI2_ADC2CLK) == RCC_PLLSAI2_ADC2CLK)) && \
- (((__VALUE__) & ~(RCC_PLLSAI2_SAI2CLK|RCC_PLLSAI2_ADC2CLK)) == 0))
+ (((__VALUE__) & ~(RCC_PLLSAI2_SAI2CLK|RCC_PLLSAI2_ADC2CLK)) == 0U))
+#endif /* RCC_PLLSAI2_SUPPORT */
#define IS_RCC_MSI_CLOCK_RANGE(__RANGE__) (((__RANGE__) == RCC_MSIRANGE_0) || \
((__RANGE__) == RCC_MSIRANGE_1) || \
@@ -2939,7 +3785,7 @@
((__RANGE__) == RCC_MSIRANGE_6) || \
((__RANGE__) == RCC_MSIRANGE_7))
-#define IS_RCC_CLOCKTYPE(__CLK__) ((1 <= (__CLK__)) && ((__CLK__) <= 15))
+#define IS_RCC_CLOCKTYPE(__CLK__) ((1U <= (__CLK__)) && ((__CLK__) <= 15U))
#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_MSI) || \
((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \
@@ -2956,19 +3802,33 @@
((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \
((__PCLK__) == RCC_HCLK_DIV16))
-#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \
- ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \
+#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NO_CLK) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \
((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32))
#define IS_RCC_MCO(__MCOX__) ((__MCOX__) == RCC_MCO1)
-#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \
+#if defined(RCC_HSI48_SUPPORT)
+#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \
+ ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_MCO1SOURCE_MSI) || \
+ ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \
+ ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \
+ ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \
+ ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \
+ ((__SOURCE__) == RCC_MCO1SOURCE_LSE) || \
+ ((__SOURCE__) == RCC_MCO1SOURCE_HSI48))
+#else
+#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \
+ ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \
((__SOURCE__) == RCC_MCO1SOURCE_MSI) || \
((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \
((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \
((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \
((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \
((__SOURCE__) == RCC_MCO1SOURCE_LSE))
+#endif /* RCC_HSI48_SUPPORT */
#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1) || ((__DIV__) == RCC_MCODIV_2) || \
((__DIV__) == RCC_MCODIV_4) || ((__DIV__) == RCC_MCODIV_8) || \