Diff: TARGET_NUCLEO_F072RB/stm32f0xx_hal_rtc_ex.h

Revision:

122:f9eeca106725

Parent:

108:34e6b704fe68

--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_rtc_ex.h	Wed May 25 16:44:06 2016 +0100
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_rtc_ex.h	Thu Jul 07 14:34:11 2016 +0100
@@ -2,13 +2,13 @@
   ******************************************************************************
   * @file    stm32f0xx_hal_rtc_ex.h
   * @author  MCD Application Team
-  * @version V1.3.0
-  * @date    26-June-2015
+  * @version V1.4.0
+  * @date    27-May-2016
   * @brief   Header file of RTC HAL Extended module.
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
   *
   * Redistribution and use in source and binary forms, with or without modification,
   * are permitted provided that the following conditions are met:
@@ -240,7 +240,7 @@
   * @{
   */
 #define RTC_TAMPER_PULLUP_ENABLE  ((uint32_t)0x00000000)            /*!< Tamper pins are pre-charged before sampling */
-#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS)   /*!< TimeStamp on Tamper Detection event is not saved */
+#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS)   /*!< Tamper pins are not pre-charged before sampling */
 
 /**
   * @}
@@ -302,8 +302,8 @@
 /** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTCEx Add 1 Second Parameter Definition
   * @{
   */
-#define RTC_SHIFTADD1S_RESET      ((uint32_t)0x00000000)
-#define RTC_SHIFTADD1S_SET        ((uint32_t)0x80000000)
+#define RTC_SHIFTADD1S_RESET      ((uint32_t)0x00000000U)
+#define RTC_SHIFTADD1S_SET        ((uint32_t)0x80000000U)
 
 /**
   * @}
@@ -396,7 +396,7 @@
   *            @arg RTC_FLAG_WUTF
   * @retval None
   */
-#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) 
+#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) 
 
 /* WAKE-UP TIMER EXTI */
 /* ------------------ */
@@ -560,7 +560,7 @@
   *             @arg RTC_FLAG_TSF  
   * @retval None
   */
-#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__)          ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__)          ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
 
 /**
   * @}
@@ -696,7 +696,8 @@
   *             @arg RTC_FLAG_TAMP3F  
   * @retval None
   */
-#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__)         ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__)      ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
 #else
 
 /**
@@ -720,7 +721,7 @@
   *             @arg RTC_FLAG_TAMP2F 
   * @retval None
   */
-#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__)         ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__)      ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
 
 #endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
 /**
@@ -930,7 +931,7 @@
 uint32_t          HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
 #endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */
 
-HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue);
 HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
 HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
 HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
@@ -982,10 +983,10 @@
 #define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
                                  ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
 #if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
-#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFD6) == 0x00) && ((TAMPER) != (uint32_t)RESET))
+#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFD6U) == 0x00) && ((TAMPER) != (uint32_t)RESET))
 
 #else
-#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFF6) == 0x00) && ((TAMPER) != (uint32_t)RESET))
+#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFF6U) == 0x00) && ((TAMPER) != (uint32_t)RESET))
 
 #endif