cc y
/
mbed
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of
mbed
by 
mbed official
Diff: TARGET_ELMO_F411RE/stm32f4xx_hal_rtc_ex.h
- Revision:
- 122:f9eeca106725
- Parent:
- 110:165afa46840b
--- a/TARGET_ELMO_F411RE/stm32f4xx_hal_rtc_ex.h Wed May 25 16:44:06 2016 +0100
+++ b/TARGET_ELMO_F411RE/stm32f4xx_hal_rtc_ex.h Thu Jul 07 14:34:11 2016 +0100
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f4xx_hal_rtc_ex.h
* @author MCD Application Team
- * @version V1.4.1
- * @date 09-October-2015
+ * @version V1.5.0
+ * @date 06-May-2016
* @brief Header file of RTC HAL Extension module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -66,27 +66,27 @@
{
uint32_t Tamper; /*!< Specifies the Tamper Pin.
This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
-
+
uint32_t PinSelection; /*!< Specifies the Tamper Pin.
- This parameter can be a value of @ref RTCEx_Tamper_Pins_Selection */
-
+ This parameter can be a value of @ref RTCEx_Tamper_Pins_Selection */
+
uint32_t Trigger; /*!< Specifies the Tamper Trigger.
This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
-
+
uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
-
+
uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
-
+
uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
-
+
uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
- This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
+ This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
}RTC_TamperTypeDef;
/**
* @}
@@ -100,26 +100,26 @@
/** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions
* @{
*/
-#define RTC_BKP_DR0 ((uint32_t)0x00000000)
-#define RTC_BKP_DR1 ((uint32_t)0x00000001)
-#define RTC_BKP_DR2 ((uint32_t)0x00000002)
-#define RTC_BKP_DR3 ((uint32_t)0x00000003)
-#define RTC_BKP_DR4 ((uint32_t)0x00000004)
-#define RTC_BKP_DR5 ((uint32_t)0x00000005)
-#define RTC_BKP_DR6 ((uint32_t)0x00000006)
-#define RTC_BKP_DR7 ((uint32_t)0x00000007)
-#define RTC_BKP_DR8 ((uint32_t)0x00000008)
-#define RTC_BKP_DR9 ((uint32_t)0x00000009)
-#define RTC_BKP_DR10 ((uint32_t)0x0000000A)
-#define RTC_BKP_DR11 ((uint32_t)0x0000000B)
-#define RTC_BKP_DR12 ((uint32_t)0x0000000C)
-#define RTC_BKP_DR13 ((uint32_t)0x0000000D)
-#define RTC_BKP_DR14 ((uint32_t)0x0000000E)
-#define RTC_BKP_DR15 ((uint32_t)0x0000000F)
-#define RTC_BKP_DR16 ((uint32_t)0x00000010)
-#define RTC_BKP_DR17 ((uint32_t)0x00000011)
-#define RTC_BKP_DR18 ((uint32_t)0x00000012)
-#define RTC_BKP_DR19 ((uint32_t)0x00000013)
+#define RTC_BKP_DR0 ((uint32_t)0x00000000U)
+#define RTC_BKP_DR1 ((uint32_t)0x00000001U)
+#define RTC_BKP_DR2 ((uint32_t)0x00000002U)
+#define RTC_BKP_DR3 ((uint32_t)0x00000003U)
+#define RTC_BKP_DR4 ((uint32_t)0x00000004U)
+#define RTC_BKP_DR5 ((uint32_t)0x00000005U)
+#define RTC_BKP_DR6 ((uint32_t)0x00000006U)
+#define RTC_BKP_DR7 ((uint32_t)0x00000007U)
+#define RTC_BKP_DR8 ((uint32_t)0x00000008U)
+#define RTC_BKP_DR9 ((uint32_t)0x00000009U)
+#define RTC_BKP_DR10 ((uint32_t)0x0000000AU)
+#define RTC_BKP_DR11 ((uint32_t)0x0000000BU)
+#define RTC_BKP_DR12 ((uint32_t)0x0000000CU)
+#define RTC_BKP_DR13 ((uint32_t)0x0000000DU)
+#define RTC_BKP_DR14 ((uint32_t)0x0000000EU)
+#define RTC_BKP_DR15 ((uint32_t)0x0000000FU)
+#define RTC_BKP_DR16 ((uint32_t)0x00000010U)
+#define RTC_BKP_DR17 ((uint32_t)0x00000011U)
+#define RTC_BKP_DR18 ((uint32_t)0x00000012U)
+#define RTC_BKP_DR19 ((uint32_t)0x00000013U)
/**
* @}
*/
@@ -127,8 +127,8 @@
/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTC TimeStamp Edges Definitions
* @{
*/
-#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000)
-#define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008)
+#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000U)
+#define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008U)
/**
* @}
*/
@@ -145,8 +145,8 @@
/** @defgroup RTCEx_Tamper_Pins_Selection RTC tamper Pins Selection
* @{
*/
-#define RTC_TAMPERPIN_DEFAULT ((uint32_t)0x00000000)
-#define RTC_TAMPERPIN_POS1 ((uint32_t)0x00010000)
+#define RTC_TAMPERPIN_DEFAULT ((uint32_t)0x00000000U)
+#define RTC_TAMPERPIN_POS1 ((uint32_t)0x00010000U)
/**
* @}
*/
@@ -154,8 +154,8 @@
/** @defgroup RTCEx_TimeStamp_Pin_Selection RTC TimeStamp Pins Selection
* @{
*/
-#define RTC_TIMESTAMPPIN_DEFAULT ((uint32_t)0x00000000)
-#define RTC_TIMESTAMPPIN_POS1 ((uint32_t)0x00020000)
+#define RTC_TIMESTAMPPIN_DEFAULT ((uint32_t)0x00000000U)
+#define RTC_TIMESTAMPPIN_POS1 ((uint32_t)0x00020000U)
/**
* @}
*/
@@ -163,8 +163,8 @@
/** @defgroup RTCEx_Tamper_Trigger_Definitions RTC Tamper Triggers Definitions
* @{
*/
-#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000)
-#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002)
+#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000U)
+#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002U)
#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
/**
@@ -174,13 +174,13 @@
/** @defgroup RTCEx_Tamper_Filter_Definitions RTC Tamper Filter Definitions
* @{
*/
-#define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000) /*!< Tamper filter is disabled */
+#define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000U) /*!< Tamper filter is disabled */
-#define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800) /*!< Tamper is activated after 2
+#define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800U) /*!< Tamper is activated after 2
consecutive samples at the active level */
-#define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000) /*!< Tamper is activated after 4
+#define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000U) /*!< Tamper is activated after 4
consecutive samples at the active level */
-#define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800) /*!< Tamper is activated after 8
+#define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800U) /*!< Tamper is activated after 8
consecutive samples at the active level. */
/**
* @}
@@ -189,21 +189,21 @@
/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTC Tamper Sampling Frequencies Definitions
* @{
*/
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000U) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 32768 */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100) /*!< Each of the tamper inputs are sampled
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100U) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 16384 */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200U) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 8192 */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300U) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 4096 */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400U) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 2048 */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500U) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 1024 */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600U) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 512 */
-#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700U) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 256 */
/**
* @}
@@ -212,13 +212,13 @@
/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTC Tamper Pin Precharge Duration Definitions
* @{
*/
-#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before
+#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000U) /*!< Tamper pins are pre-charged before
sampling during 1 RTCCLK cycle */
-#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before
+#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000U) /*!< Tamper pins are pre-charged before
sampling during 2 RTCCLK cycles */
-#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before
+#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000U) /*!< Tamper pins are pre-charged before
sampling during 4 RTCCLK cycles */
-#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before
+#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000U) /*!< Tamper pins are pre-charged before
sampling during 8 RTCCLK cycles */
/**
* @}
@@ -228,7 +228,7 @@
* @{
*/
#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */
-#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event is not saved */
+#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000U) /*!< TimeStamp on Tamper Detection event is not saved */
/**
* @}
*/
@@ -236,7 +236,7 @@
/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTC Tamper Pull Up Definitions
* @{
*/
-#define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000U) /*!< TimeStamp on Tamper Detection event saved */
#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */
/**
* @}
@@ -245,12 +245,12 @@
/** @defgroup RTCEx_Wakeup_Timer_Definitions RTC Wake-up Timer Definitions
* @{
*/
-#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000)
-#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001)
-#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002)
-#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003)
-#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004)
-#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000U)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001U)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002U)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003U)
+#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004U)
+#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006U)
/**
* @}
*/
@@ -258,8 +258,8 @@
/** @defgroup RTCEx_Digital_Calibration_Definitions RTC Digital Calib Definitions
* @{
*/
-#define RTC_CALIBSIGN_POSITIVE ((uint32_t)0x00000000)
-#define RTC_CALIBSIGN_NEGATIVE ((uint32_t)0x00000080)
+#define RTC_CALIBSIGN_POSITIVE ((uint32_t)0x00000000U)
+#define RTC_CALIBSIGN_NEGATIVE ((uint32_t)0x00000080U)
/**
* @}
*/
@@ -267,11 +267,11 @@
/** @defgroup RTCEx_Smooth_calib_period_Definitions RTC Smooth Calib Period Definitions
* @{
*/
-#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000) /*!< If RTCCLK = 32768 Hz, Smooth calibration
+#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000U) /*!< If RTCCLK = 32768 Hz, Smooth calibration
period is 32s, else 2exp20 RTCCLK seconds */
-#define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000) /*!< If RTCCLK = 32768 Hz, Smooth calibration
+#define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000U) /*!< If RTCCLK = 32768 Hz, Smooth calibration
period is 16s, else 2exp19 RTCCLK seconds */
-#define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000) /*!< If RTCCLK = 32768 Hz, Smooth calibration
+#define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000U) /*!< If RTCCLK = 32768 Hz, Smooth calibration
period is 8s, else 2exp18 RTCCLK seconds */
/**
* @}
@@ -280,10 +280,10 @@
/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTC Smooth Calib Plus Pulses Definitions
* @{
*/
-#define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added
+#define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000U) /*!< The number of RTCCLK pulses added
during a X -second window = Y - CALM[8:0]
with Y = 512, 256, 128 when X = 32, 16, 8 */
-#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited
+#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000U) /*!< The number of RTCCLK pulses subbstited
during a 32-second window = CALM[8:0] */
/**
* @}
@@ -292,8 +292,8 @@
/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTC Add 1 Second Parameter Definitions
* @{
*/
-#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000)
-#define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000)
+#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000U)
+#define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000U)
/**
* @}
*/
@@ -302,8 +302,8 @@
/** @defgroup RTCEx_Calib_Output_selection_Definitions RTC Calib Output Selection Definitions
* @{
*/
-#define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000)
-#define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000)
+#define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000U)
+#define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000U)
/**
* @}
*/
@@ -364,7 +364,7 @@
* @arg RTC_IT_WUT: WakeUpTimer A interrupt
* @retval None
*/
-#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
+#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
/**
* @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
@@ -449,14 +449,18 @@
* @brief Enable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.
* @retval None.
*/
-#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();\
+ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();\
+ } while(0)
/**
* @brief Disable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.
* This parameter can be:
* @retval None.
*/
-#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();\
+ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();\
+ } while(0)
/**
* @brief Check whether the RTC Wake-up Timer associated Exti line interrupt flag is set or not.
@@ -527,7 +531,7 @@
* @arg RTC_IT_TS: TimeStamp interrupt
* @retval None
*/
-#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
+#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
/**
* @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not.
@@ -606,7 +610,7 @@
* @arg RTC_IT_TAMP2
* @retval None
*/
-#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
/**
* @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
@@ -700,14 +704,18 @@
* @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
* @retval None.
*/
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE();
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();\
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); \
+ } while(0)
/**
* @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
* This parameter can be:
* @retval None.
*/
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();\
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();\
+ } while(0)
/**
* @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
@@ -873,14 +881,14 @@
* @}
*/
-/* Private types -------------------------------------------------------------*/
+/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
* @{
*/
-#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)EXTI_IMR_MR21) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
-#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_MR22) /*!< External interrupt line 22 Connected to the RTC Wake-up event */
+#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)EXTI_IMR_MR21) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
+#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_MR22) /*!< External interrupt line 22 Connected to the RTC Wake-up event */
/**
* @}
*/
@@ -915,14 +923,14 @@
((BKP) == RTC_BKP_DR19))
#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
-#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)!(RTC_TAFCR_TAMP1E | RTC_TAFCR_TAMP2E))) == 0x00) && ((TAMPER) != (uint32_t)RESET))
+#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)!(RTC_TAFCR_TAMP1E | RTC_TAFCR_TAMP2E))) == 0x00U) && ((TAMPER) != (uint32_t)RESET))
#define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TAMPERPIN_DEFAULT) || \
((PIN) == RTC_TAMPERPIN_POS1))
-
+
#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT) || \
((PIN) == RTC_TIMESTAMPPIN_POS1))
-
+
#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
@@ -954,11 +962,11 @@
((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
-#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF)
+#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFFU)
#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CALIBSIGN_POSITIVE) || \
((SIGN) == RTC_CALIBSIGN_NEGATIVE))
-#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20)
+#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20U)
#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
@@ -966,11 +974,10 @@
#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
-
-#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF)
+#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FFU)
#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
((SEL) == RTC_SHIFTADD1S_SET))
-#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF)
+#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFFU)
#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
/**