Diff: TARGET_NRF51822/ble_l2cap.h

Revision:

82:6473597d706e

Parent:

81:7d30d6019079

Child:

83:8a40adfe8776

--- a/TARGET_NRF51822/ble_l2cap.h	Wed Mar 19 18:28:32 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,135 +0,0 @@
-/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
- *
- * The information contained herein is confidential property of Nordic Semiconductor. The use,
- * copying, transfer or disclosure of such information is prohibited except by express written
- * agreement with Nordic Semiconductor.
- *
- */
-/**
-  @addtogroup BLE_L2CAP Logical Link Control and Adaptation Protocol (L2CAP)
-  @{
-  @brief Definitions and prototypes for the L2CAP interface.
- */
-
-#ifndef BLE_L2CAP_H__
-#define BLE_L2CAP_H__ 
-
-#include "ble_types.h"
-#include "ble_ranges.h"
-#include "ble_err.h"
-#include "nrf_svc.h"
-
-/**@brief L2CAP API SVC numbers. */
-enum BLE_L2CAP_SVCS 
-{
-  SD_BLE_L2CAP_CID_REGISTER = BLE_L2CAP_SVC_BASE,  /**< Register a CID. */
-  SD_BLE_L2CAP_CID_UNREGISTER,                     /**< Unregister a CID. */
-  SD_BLE_L2CAP_TX                                  /**< Transmit a packet. */
-};
-
-/**@addtogroup BLE_L2CAP_DEFINES Defines
- * @{ */
-
-/**@defgroup BLE_ERRORS_L2CAP SVC return values specific to L2CAP
- * @{ */
-#define BLE_ERROR_L2CAP_CID_IN_USE            (NRF_L2CAP_ERR_BASE + 0x000)  /**< CID already in use. */
-/** @} */
-
-/**@brief Default L2CAP MTU. */
-#define BLE_L2CAP_MTU_DEF           (23)    
-
-/**@brief Invalid Channel Identifier. */
-#define BLE_L2CAP_CID_INVALID       (0x0000) 
-
-/**@brief Dynamic Channel Identifier base. */
-#define BLE_L2CAP_CID_DYN_BASE      (0x0040) 
-
-/**@brief Maximum amount of dynamic CIDs. */
-#define BLE_L2CAP_CID_DYN_MAX       (8) 
-
-/** @} */
-
-/**@brief Packet header format for L2CAP transmission. */
-typedef struct
-{
-  uint16_t   len;                                 /**< Length of valid info in data member. */
-  uint16_t   cid;                                 /**< Channel ID on which packet is transmitted. */
-} ble_l2cap_header_t;
-
-/**@brief L2CAP Event IDs. */
-enum BLE_L2CAP_EVTS 
-{
-  BLE_L2CAP_EVT_RX  = BLE_L2CAP_EVT_BASE          /**< L2CAP packet received. */
-};
-
-
-/**@brief L2CAP Received packet event report. */
-typedef struct
-{
-  ble_l2cap_header_t header;                      /** L2CAP packet header. */
-  uint8_t    data[1];                             /**< Packet data, variable length. */
-} ble_l2cap_evt_rx_t;
-
-
-/**@brief L2CAP event callback event structure. */
-typedef struct
-{
-  uint16_t conn_handle;                           /**< Connection Handle on which event occured. */
-  union
-  {
-    ble_l2cap_evt_rx_t rx;                        /**< RX Event parameters. */
-  } params;
-} ble_l2cap_evt_t;
-
-
-/**@brief Register a CID with L2CAP.
- *
- * @details This registers a higher protocol layer with the L2CAP multiplexer, and is requried prior to all operations on the CID.
- *          
- * @param[in] cid L2CAP CID.
- *
- * @return @ref NRF_SUCCESS Successfully registered a CID with the L2CAP layer.
- * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, CID must be above @ref BLE_L2CAP_CID_DYN_BASE.
- * @return @ref BLE_ERROR_L2CAP_CID_IN_USE L2CAP CID already in use.
- * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
- */
-SVCALL(SD_BLE_L2CAP_CID_REGISTER, uint32_t, sd_ble_l2cap_cid_register(uint16_t cid));
-
-/**@brief Unregister a CID with L2CAP.
- *
- * @details This unregisters a previously registerd higher protocol layer with the L2CAP multiplexer.
- *          
- * @param[in] cid L2CAP CID.
- *
- * @return @ref NRF_SUCCESS Successfully unregistered the CID.
- * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
- * @return @ref NRF_ERROR_NOT_FOUND CID not previously registered.
- */
-SVCALL(SD_BLE_L2CAP_CID_UNREGISTER, uint32_t, sd_ble_l2cap_cid_unregister(uint16_t cid));
-
-/**@brief Transmit an L2CAP packet.
- *
- * @note    It is important to note that a call to this function will <b>consume an application buffer</b>, and will therefore 
- *          generate a @ref BLE_EVT_TX_COMPLETE event when the packet has been transmitted. 
- *          Please see the documentation of @ref sd_ble_tx_buffer_count_get for more details.
- *
- * @param[in] conn_handle Connection Handle.
- * @param[in] p_header    Pointer to a packet header containing length and CID.
- * @param[in] p_data      Pointer to the data to be transmitted.
- *
- * @return @ref NRF_SUCCESS Successfully queued an L2CAP packet for transmission.
- * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
- * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, CIDs must be registered beforehand with @ref sd_ble_l2cap_cid_register.
- * @return @ref NRF_ERROR_NOT_FOUND CID not found.
- * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
- * @return @ref BLE_ERROR_NO_TX_BUFFERS Not enough application buffers available.
- * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, see @ref BLE_L2CAP_MTU_DEF.
- */
-SVCALL(SD_BLE_L2CAP_TX, uint32_t, sd_ble_l2cap_tx(uint16_t conn_handle, ble_l2cap_header_t const * const p_header, uint8_t const * const p_data));
-
-
-#endif // BLE_L2CAP_H__
-
-/**
-  @}
-*/