Diff: TARGET_NRF51822/ble_hci.h

Revision:

82:6473597d706e

Parent:

81:7d30d6019079

Child:

83:8a40adfe8776

--- a/TARGET_NRF51822/ble_hci.h	Wed Mar 19 18:28:32 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,96 +0,0 @@
-/*
-  Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
-
-  The information contained herein is confidential property of Nordic Semiconductor. The use,
-  copying, transfer or disclosure of such information is prohibited except by express written
-  agreement with Nordic Semiconductor.
- */
-/**
-  @addtogroup BLE_COMMON 
-  @{
-*/
-
-
-#ifndef BLE_HCI_H__
-#define BLE_HCI_H__ 
-
-/** @defgroup BLE_HCI_STATUS_CODES Bluetooth status codes
- * @{ */
-
-#define BLE_HCI_STATUS_CODE_SUCCESS                        0x00
-#define BLE_HCI_STATUS_CODE_UNKNOWN_BTLE_COMMAND           0x01
-#define BLE_HCI_STATUS_CODE_UNKNOWN_CONNECTION_IDENTIFIER  0x02 
-/*0x03 Hardware Failure
-0x04 Page Timeout
-*/
-#define BLE_HCI_AUTHENTICATION_FAILURE                     0x05
-#define BLE_HCI_STATUS_CODE_PIN_OR_KEY_MISSING             0x06
-#define BLE_HCI_MEMORY_CAPACITY_EXCEEDED                   0x07
-#define BLE_HCI_CONNECTION_TIMEOUT                         0x08
-/*0x09 Connection Limit Exceeded
-0x0A Synchronous Connection Limit To A Device Exceeded
-0x0B ACL Connection Already Exists*/
-#define BLE_HCI_STATUS_CODE_COMMAND_DISALLOWED             0x0C
-/*0x0D Connection Rejected due to Limited Resources
-0x0E Connection Rejected Due To Security Reasons
-0x0F Connection Rejected due to Unacceptable BD_ADDR
-0x10 Connection Accept Timeout Exceeded
-0x11 Unsupported Feature or Parameter Value*/
-#define BLE_HCI_STATUS_CODE_INVALID_BTLE_COMMAND_PARAMETERS 0x12
-#define BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION           0x13
-#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES 0x14
-#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF     0x15
-#define BLE_HCI_LOCAL_HOST_TERMINATED_CONNECTION            0x16
-/*
-0x17 Repeated Attempts
-0x18 Pairing Not Allowed
-0x19 Unknown LMP PDU
-*/
-#define BLE_HCI_UNSUPPORTED_REMOTE_FEATURE 0x1A
-/*
-0x1B SCO Offset Rejected
-0x1C SCO Interval Rejected
-0x1D SCO Air Mode Rejected*/
-#define BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS     0x1E
-#define BLE_HCI_STATUS_CODE_UNSPECIFIED_ERROR          0x1F
-/*0x20 Unsupported LMP Parameter Value
-0x21 Role Change Not Allowed
-*/
-#define BLE_HCI_STATUS_CODE_LMP_RESPONSE_TIMEOUT       0x22
-/*0x23 LMP Error Transaction Collision*/
-#define BLE_HCI_STATUS_CODE_LMP_PDU_NOT_ALLOWED        0x24
-/*0x25 Encryption Mode Not Acceptable
-0x26 Link Key Can Not be Changed
-0x27 Requested QoS Not Supported
-*/
-#define BLE_HCI_INSTANT_PASSED                         0x28
-#define BLE_HCI_PAIRING_WITH_UNIT_KEY_UNSUPPORTED      0x29
-#define BLE_HCI_DIFFERENT_TRANSACTION_COLLISION        0x2A
-/*
-0x2B Reserved
-0x2C QoS Unacceptable Parameter
-0x2D QoS Rejected
-0x2E Channel Classification Not Supported
-0x2F Insufficient Security
-0x30 Parameter Out Of Mandatory Range
-0x31 Reserved
-0x32 Role Switch Pending
-0x33 Reserved
-0x34 Reserved Slot Violation
-0x35 Role Switch Failed
-0x36 Extended Inquiry Response Too Large
-0x37 Secure Simple Pairing Not Supported By Host.
-0x38 Host Busy - Pairing
-0x39 Connection Rejected due to No Suitable Channel Found*/
-#define BLE_HCI_CONTROLLER_BUSY                        0x3A
-#define BLE_HCI_CONN_INTERVAL_UNACCEPTABLE             0x3B
-#define BLE_HCI_DIRECTED_ADVERTISER_TIMEOUT            0x3C
-#define BLE_HCI_CONN_TERMINATED_DUE_TO_MIC_FAILURE     0x3D
-#define BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED          0x3E
-
-/** @} */
-
-
-#endif // BLE_HCI_H__
-
-/** @} */