cc y / mbed

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Fork of mbed by mbed official

Diff: TARGET_NUCLEO_L053R8/stm32l0xx_hal_conf.h

Revision:
96:487b796308b0
Parent:
92:4fc01daae5a5
Child:
98:8ab26030e058
--- a/TARGET_NUCLEO_L053R8/stm32l0xx_hal_conf.h	Wed Mar 04 07:31:39 2015 +0100
+++ b/TARGET_NUCLEO_L053R8/stm32l0xx_hal_conf.h	Tue Mar 17 14:27:45 2015 +0000
@@ -1,14 +1,16 @@
 /**
   ******************************************************************************
-  * @file    stm32l0xx_hal_conf.h
+  * @file    stm32l0xx_hal_conf_template.h
   * @author  MCD Application Team
-  * @version V1.1.0
-  * @date    18-June-2014
-  * @brief   HAL configuration file.
+  * @version V1.2.0
+  * @date    06-February-2015
+  * @brief   HAL configuration template file. 
+  *          This file should be copied to the application folder and renamed
+  *          to stm32l0xx_hal_conf.h.
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
   *
   * Redistribution and use in source and binary forms, with or without modification,
   * are permitted provided that the following conditions are met:
@@ -57,7 +59,8 @@
 #define HAL_CRYP_MODULE_ENABLED  
 #define HAL_DAC_MODULE_ENABLED   
 #define HAL_DMA_MODULE_ENABLED
-#define HAL_FLASH_MODULE_ENABLED 
+#define HAL_FIREWALL_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
 #define HAL_GPIO_MODULE_ENABLED
 #define HAL_I2C_MODULE_ENABLED
 #define HAL_I2S_MODULE_ENABLED   
@@ -80,7 +83,6 @@
 #define HAL_CORTEX_MODULE_ENABLED
 #define HAL_PCD_MODULE_ENABLED 
 
-
 /* ########################## Oscillator Values adaptation ####################*/
 /**
   * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
@@ -102,7 +104,6 @@
 #if !defined  (MSI_VALUE)
   #define MSI_VALUE    ((uint32_t)2000000) /*!< Value of the Internal oscillator in Hz*/
 #endif /* MSI_VALUE */
-   
 /**
   * @brief Internal High Speed oscillator (HSI) value.
   *        This value is used by the RCC HAL module to compute the system frequency
@@ -111,7 +112,7 @@
 #if !defined  (HSI_VALUE)
   #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
 #endif /* HSI_VALUE */
-   
+
 /**
   * @brief External Low Speed oscillator (LSE) value.
   *        This value is used by the UART, RTC HAL module to compute the system frequency
@@ -134,10 +135,10 @@
   * @brief This is the HAL system configuration section
   */     
 #define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            ((uint32_t)3)    /*!< tick interrupt priority */            
+#define  TICK_INT_PRIORITY            (((uint32_t)1<<__NVIC_PRIO_BITS) - 1)    /*!< tick interrupt priority */            
 #define  USE_RTOS                     0     
 #define  PREFETCH_ENABLE              1              
-#define  PREREAD_ENABLE               1
+#define  PREREAD_ENABLE               0
 #define  BUFFER_CACHE_DISABLE         0
 
 /* ########################## Assert Selection ############################## */
@@ -155,7 +156,7 @@
 #ifdef HAL_RCC_MODULE_ENABLED
   #include "stm32l0xx_hal_rcc.h"
 #endif /* HAL_RCC_MODULE_ENABLED */
-
+  
 #ifdef HAL_GPIO_MODULE_ENABLED
   #include "stm32l0xx_hal_gpio.h"
 #endif /* HAL_GPIO_MODULE_ENABLED */
@@ -163,7 +164,7 @@
 #ifdef HAL_DMA_MODULE_ENABLED
   #include "stm32l0xx_hal_dma.h"
 #endif /* HAL_DMA_MODULE_ENABLED */
-   
+
 #ifdef HAL_CORTEX_MODULE_ENABLED
   #include "stm32l0xx_hal_cortex.h"
 #endif /* HAL_CORTEX_MODULE_ENABLED */
@@ -175,7 +176,7 @@
 #ifdef HAL_COMP_MODULE_ENABLED
   #include "stm32l0xx_hal_comp.h"
 #endif /* HAL_COMP_MODULE_ENABLED */
-   
+
 #ifdef HAL_CRC_MODULE_ENABLED
   #include "stm32l0xx_hal_crc.h"
 #endif /* HAL_CRC_MODULE_ENABLED */
@@ -188,6 +189,10 @@
   #include "stm32l0xx_hal_dac.h"
 #endif /* HAL_DAC_MODULE_ENABLED */
 
+#ifdef HAL_FIREWALL_MODULE_ENABLED
+  #include "stm32l0xx_hal_firewall.h"
+#endif /* HAL_FIREWALL_MODULE_ENABLED */
+ 
 #ifdef HAL_FLASH_MODULE_ENABLED
   #include "stm32l0xx_hal_flash.h"
 #endif /* HAL_FLASH_MODULE_ENABLED */
@@ -222,7 +227,6 @@
 
 #ifdef HAL_RTC_MODULE_ENABLED
  #include "stm32l0xx_hal_rtc.h"
-
 #endif /* HAL_RTC_MODULE_ENABLED */
 
 #ifdef HAL_SPI_MODULE_ENABLED
@@ -290,3 +294,4 @@
  
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+