ads1115 only
Fork of mbed by
platform/mbed_interface.h@128:9bcdf88f62b0, 2016-10-27 (annotated)
- Committer:
- <>
- Date:
- Thu Oct 27 16:45:56 2016 +0100
- Revision:
- 128:9bcdf88f62b0
Release 128 of the mbed library
Ports for Upcoming Targets
Fixes and Changes
2966: Add kw24 support https://github.com/ARMmbed/mbed-os/pull/2966
3068: MultiTech mDot - clean up PeripheralPins.c and add new pin names https://github.com/ARMmbed/mbed-os/pull/3068
3089: Kinetis HAL: Remove clock initialization code from serial and ticker https://github.com/ARMmbed/mbed-os/pull/3089
2943: [NRF5] NVIC_SetVector functionality https://github.com/ARMmbed/mbed-os/pull/2943
2938: InterruptIn changes in NCS36510 HAL. https://github.com/ARMmbed/mbed-os/pull/2938
3108: Fix sleep function for NRF52. https://github.com/ARMmbed/mbed-os/pull/3108
3076: STM32F1: Correct timer master value reading https://github.com/ARMmbed/mbed-os/pull/3076
3085: Add LOWPOWERTIMER capability for NUCLEO_F303ZE https://github.com/ARMmbed/mbed-os/pull/3085
3046: [BEETLE] Update BLE stack on Beetle board https://github.com/ARMmbed/mbed-os/pull/3046
3122: [Silicon Labs] Update of Silicon Labs HAL https://github.com/ARMmbed/mbed-os/pull/3122
3022: OnSemi RAM usage fix https://github.com/ARMmbed/mbed-os/pull/3022
3121: STM32F3: Correct UART4 and UART5 defines when using DEVICE_SERIAL_ASYNCH https://github.com/ARMmbed/mbed-os/pull/3121
3142: Targets- NUMAKER_PFM_NUC47216 remove mbed 2 https://github.com/ARMmbed/mbed-os/pull/3142
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
<> | 128:9bcdf88f62b0 | 1 | |
<> | 128:9bcdf88f62b0 | 2 | /** \addtogroup platform */ |
<> | 128:9bcdf88f62b0 | 3 | /** @{*/ |
<> | 128:9bcdf88f62b0 | 4 | /* mbed Microcontroller Library |
<> | 128:9bcdf88f62b0 | 5 | * Copyright (c) 2006-2013 ARM Limited |
<> | 128:9bcdf88f62b0 | 6 | * |
<> | 128:9bcdf88f62b0 | 7 | * Licensed under the Apache License, Version 2.0 (the "License"); |
<> | 128:9bcdf88f62b0 | 8 | * you may not use this file except in compliance with the License. |
<> | 128:9bcdf88f62b0 | 9 | * You may obtain a copy of the License at |
<> | 128:9bcdf88f62b0 | 10 | * |
<> | 128:9bcdf88f62b0 | 11 | * http://www.apache.org/licenses/LICENSE-2.0 |
<> | 128:9bcdf88f62b0 | 12 | * |
<> | 128:9bcdf88f62b0 | 13 | * Unless required by applicable law or agreed to in writing, software |
<> | 128:9bcdf88f62b0 | 14 | * distributed under the License is distributed on an "AS IS" BASIS, |
<> | 128:9bcdf88f62b0 | 15 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
<> | 128:9bcdf88f62b0 | 16 | * See the License for the specific language governing permissions and |
<> | 128:9bcdf88f62b0 | 17 | * limitations under the License. |
<> | 128:9bcdf88f62b0 | 18 | */ |
<> | 128:9bcdf88f62b0 | 19 | #ifndef MBED_INTERFACE_H |
<> | 128:9bcdf88f62b0 | 20 | #define MBED_INTERFACE_H |
<> | 128:9bcdf88f62b0 | 21 | |
<> | 128:9bcdf88f62b0 | 22 | #include <stdarg.h> |
<> | 128:9bcdf88f62b0 | 23 | |
<> | 128:9bcdf88f62b0 | 24 | #include "device.h" |
<> | 128:9bcdf88f62b0 | 25 | |
<> | 128:9bcdf88f62b0 | 26 | /* Mbed interface mac address |
<> | 128:9bcdf88f62b0 | 27 | * if MBED_MAC_ADD_x are zero, interface uid sets mac address, |
<> | 128:9bcdf88f62b0 | 28 | * otherwise MAC_ADD_x are used. |
<> | 128:9bcdf88f62b0 | 29 | */ |
<> | 128:9bcdf88f62b0 | 30 | #define MBED_MAC_ADDR_INTERFACE 0x00 |
<> | 128:9bcdf88f62b0 | 31 | #define MBED_MAC_ADDR_0 MBED_MAC_ADDR_INTERFACE |
<> | 128:9bcdf88f62b0 | 32 | #define MBED_MAC_ADDR_1 MBED_MAC_ADDR_INTERFACE |
<> | 128:9bcdf88f62b0 | 33 | #define MBED_MAC_ADDR_2 MBED_MAC_ADDR_INTERFACE |
<> | 128:9bcdf88f62b0 | 34 | #define MBED_MAC_ADDR_3 MBED_MAC_ADDR_INTERFACE |
<> | 128:9bcdf88f62b0 | 35 | #define MBED_MAC_ADDR_4 MBED_MAC_ADDR_INTERFACE |
<> | 128:9bcdf88f62b0 | 36 | #define MBED_MAC_ADDR_5 MBED_MAC_ADDR_INTERFACE |
<> | 128:9bcdf88f62b0 | 37 | #define MBED_MAC_ADDRESS_SUM (MBED_MAC_ADDR_0 | MBED_MAC_ADDR_1 | MBED_MAC_ADDR_2 | MBED_MAC_ADDR_3 | MBED_MAC_ADDR_4 | MBED_MAC_ADDR_5) |
<> | 128:9bcdf88f62b0 | 38 | |
<> | 128:9bcdf88f62b0 | 39 | #ifdef __cplusplus |
<> | 128:9bcdf88f62b0 | 40 | extern "C" { |
<> | 128:9bcdf88f62b0 | 41 | #endif |
<> | 128:9bcdf88f62b0 | 42 | |
<> | 128:9bcdf88f62b0 | 43 | #if DEVICE_SEMIHOST |
<> | 128:9bcdf88f62b0 | 44 | |
<> | 128:9bcdf88f62b0 | 45 | /** Functions to control the mbed interface |
<> | 128:9bcdf88f62b0 | 46 | * |
<> | 128:9bcdf88f62b0 | 47 | * mbed Microcontrollers have a built-in interface to provide functionality such as |
<> | 128:9bcdf88f62b0 | 48 | * drag-n-drop download, reset, serial-over-usb, and access to the mbed local file |
<> | 128:9bcdf88f62b0 | 49 | * system. These functions provide means to control the interface suing semihost |
<> | 128:9bcdf88f62b0 | 50 | * calls it supports. |
<> | 128:9bcdf88f62b0 | 51 | */ |
<> | 128:9bcdf88f62b0 | 52 | |
<> | 128:9bcdf88f62b0 | 53 | /** Determine whether the mbed interface is connected, based on whether debug is enabled |
<> | 128:9bcdf88f62b0 | 54 | * |
<> | 128:9bcdf88f62b0 | 55 | * @returns |
<> | 128:9bcdf88f62b0 | 56 | * 1 if interface is connected, |
<> | 128:9bcdf88f62b0 | 57 | * 0 otherwise |
<> | 128:9bcdf88f62b0 | 58 | */ |
<> | 128:9bcdf88f62b0 | 59 | int mbed_interface_connected(void); |
<> | 128:9bcdf88f62b0 | 60 | |
<> | 128:9bcdf88f62b0 | 61 | /** Instruct the mbed interface to reset, as if the reset button had been pressed |
<> | 128:9bcdf88f62b0 | 62 | * |
<> | 128:9bcdf88f62b0 | 63 | * @returns |
<> | 128:9bcdf88f62b0 | 64 | * 1 if successful, |
<> | 128:9bcdf88f62b0 | 65 | * 0 otherwise (e.g. interface not present) |
<> | 128:9bcdf88f62b0 | 66 | */ |
<> | 128:9bcdf88f62b0 | 67 | int mbed_interface_reset(void); |
<> | 128:9bcdf88f62b0 | 68 | |
<> | 128:9bcdf88f62b0 | 69 | /** This will disconnect the debug aspect of the interface, so semihosting will be disabled. |
<> | 128:9bcdf88f62b0 | 70 | * The interface will still support the USB serial aspect |
<> | 128:9bcdf88f62b0 | 71 | * |
<> | 128:9bcdf88f62b0 | 72 | * @returns |
<> | 128:9bcdf88f62b0 | 73 | * 0 if successful, |
<> | 128:9bcdf88f62b0 | 74 | * -1 otherwise (e.g. interface not present) |
<> | 128:9bcdf88f62b0 | 75 | */ |
<> | 128:9bcdf88f62b0 | 76 | int mbed_interface_disconnect(void); |
<> | 128:9bcdf88f62b0 | 77 | |
<> | 128:9bcdf88f62b0 | 78 | /** This will disconnect the debug aspect of the interface, and if the USB cable is not |
<> | 128:9bcdf88f62b0 | 79 | * connected, also power down the interface. If the USB cable is connected, the interface |
<> | 128:9bcdf88f62b0 | 80 | * will remain powered up and visible to the host |
<> | 128:9bcdf88f62b0 | 81 | * |
<> | 128:9bcdf88f62b0 | 82 | * @returns |
<> | 128:9bcdf88f62b0 | 83 | * 0 if successful, |
<> | 128:9bcdf88f62b0 | 84 | * -1 otherwise (e.g. interface not present) |
<> | 128:9bcdf88f62b0 | 85 | */ |
<> | 128:9bcdf88f62b0 | 86 | int mbed_interface_powerdown(void); |
<> | 128:9bcdf88f62b0 | 87 | |
<> | 128:9bcdf88f62b0 | 88 | /** This returns a string containing the 32-character UID of the mbed interface |
<> | 128:9bcdf88f62b0 | 89 | * This is a weak function that can be overwritten if required |
<> | 128:9bcdf88f62b0 | 90 | * |
<> | 128:9bcdf88f62b0 | 91 | * @param uid A 33-byte array to write the null terminated 32-byte string |
<> | 128:9bcdf88f62b0 | 92 | * |
<> | 128:9bcdf88f62b0 | 93 | * @returns |
<> | 128:9bcdf88f62b0 | 94 | * 0 if successful, |
<> | 128:9bcdf88f62b0 | 95 | * -1 otherwise (e.g. interface not present) |
<> | 128:9bcdf88f62b0 | 96 | */ |
<> | 128:9bcdf88f62b0 | 97 | int mbed_interface_uid(char *uid); |
<> | 128:9bcdf88f62b0 | 98 | |
<> | 128:9bcdf88f62b0 | 99 | #endif |
<> | 128:9bcdf88f62b0 | 100 | |
<> | 128:9bcdf88f62b0 | 101 | /** This returns a unique 6-byte MAC address, based on the interface UID |
<> | 128:9bcdf88f62b0 | 102 | * If the interface is not present, it returns a default fixed MAC address (00:02:F7:F0:00:00) |
<> | 128:9bcdf88f62b0 | 103 | * |
<> | 128:9bcdf88f62b0 | 104 | * This is a weak function that can be overwritten if you want to provide your own mechanism to |
<> | 128:9bcdf88f62b0 | 105 | * provide a MAC address. |
<> | 128:9bcdf88f62b0 | 106 | * |
<> | 128:9bcdf88f62b0 | 107 | * @param mac A 6-byte array to write the MAC address |
<> | 128:9bcdf88f62b0 | 108 | */ |
<> | 128:9bcdf88f62b0 | 109 | void mbed_mac_address(char *mac); |
<> | 128:9bcdf88f62b0 | 110 | |
<> | 128:9bcdf88f62b0 | 111 | /** Cause the mbed to flash the BLOD (Blue LEDs Of Death) sequence |
<> | 128:9bcdf88f62b0 | 112 | */ |
<> | 128:9bcdf88f62b0 | 113 | void mbed_die(void); |
<> | 128:9bcdf88f62b0 | 114 | |
<> | 128:9bcdf88f62b0 | 115 | /** Print out an error message. This is typically called when |
<> | 128:9bcdf88f62b0 | 116 | * hanlding a crash. |
<> | 128:9bcdf88f62b0 | 117 | * |
<> | 128:9bcdf88f62b0 | 118 | * @Note Synchronization level: Interrupt safe |
<> | 128:9bcdf88f62b0 | 119 | */ |
<> | 128:9bcdf88f62b0 | 120 | void mbed_error_printf(const char* format, ...); |
<> | 128:9bcdf88f62b0 | 121 | |
<> | 128:9bcdf88f62b0 | 122 | /** Print out an error message. Similar to mbed_error_printf |
<> | 128:9bcdf88f62b0 | 123 | * but uses a va_list. |
<> | 128:9bcdf88f62b0 | 124 | * |
<> | 128:9bcdf88f62b0 | 125 | * @Note Synchronization level: Interrupt safe |
<> | 128:9bcdf88f62b0 | 126 | */ |
<> | 128:9bcdf88f62b0 | 127 | void mbed_error_vfprintf(const char * format, va_list arg); |
<> | 128:9bcdf88f62b0 | 128 | |
<> | 128:9bcdf88f62b0 | 129 | #ifdef __cplusplus |
<> | 128:9bcdf88f62b0 | 130 | } |
<> | 128:9bcdf88f62b0 | 131 | #endif |
<> | 128:9bcdf88f62b0 | 132 | |
<> | 128:9bcdf88f62b0 | 133 | #endif |
<> | 128:9bcdf88f62b0 | 134 | |
<> | 128:9bcdf88f62b0 | 135 | /** @}*/ |