ads1115 only
Fork of mbed by
platform/mbed_error.h@128:9bcdf88f62b0, 2016-10-27 (annotated)
- Committer:
- <>
- Date:
- Thu Oct 27 16:45:56 2016 +0100
- Revision:
- 128:9bcdf88f62b0
Release 128 of the mbed library
Ports for Upcoming Targets
Fixes and Changes
2966: Add kw24 support https://github.com/ARMmbed/mbed-os/pull/2966
3068: MultiTech mDot - clean up PeripheralPins.c and add new pin names https://github.com/ARMmbed/mbed-os/pull/3068
3089: Kinetis HAL: Remove clock initialization code from serial and ticker https://github.com/ARMmbed/mbed-os/pull/3089
2943: [NRF5] NVIC_SetVector functionality https://github.com/ARMmbed/mbed-os/pull/2943
2938: InterruptIn changes in NCS36510 HAL. https://github.com/ARMmbed/mbed-os/pull/2938
3108: Fix sleep function for NRF52. https://github.com/ARMmbed/mbed-os/pull/3108
3076: STM32F1: Correct timer master value reading https://github.com/ARMmbed/mbed-os/pull/3076
3085: Add LOWPOWERTIMER capability for NUCLEO_F303ZE https://github.com/ARMmbed/mbed-os/pull/3085
3046: [BEETLE] Update BLE stack on Beetle board https://github.com/ARMmbed/mbed-os/pull/3046
3122: [Silicon Labs] Update of Silicon Labs HAL https://github.com/ARMmbed/mbed-os/pull/3122
3022: OnSemi RAM usage fix https://github.com/ARMmbed/mbed-os/pull/3022
3121: STM32F3: Correct UART4 and UART5 defines when using DEVICE_SERIAL_ASYNCH https://github.com/ARMmbed/mbed-os/pull/3121
3142: Targets- NUMAKER_PFM_NUC47216 remove mbed 2 https://github.com/ARMmbed/mbed-os/pull/3142
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
<> | 128:9bcdf88f62b0 | 1 | |
<> | 128:9bcdf88f62b0 | 2 | /** \addtogroup platform */ |
<> | 128:9bcdf88f62b0 | 3 | /** @{*/ |
<> | 128:9bcdf88f62b0 | 4 | /* mbed Microcontroller Library |
<> | 128:9bcdf88f62b0 | 5 | * Copyright (c) 2006-2013 ARM Limited |
<> | 128:9bcdf88f62b0 | 6 | * |
<> | 128:9bcdf88f62b0 | 7 | * Licensed under the Apache License, Version 2.0 (the "License"); |
<> | 128:9bcdf88f62b0 | 8 | * you may not use this file except in compliance with the License. |
<> | 128:9bcdf88f62b0 | 9 | * You may obtain a copy of the License at |
<> | 128:9bcdf88f62b0 | 10 | * |
<> | 128:9bcdf88f62b0 | 11 | * http://www.apache.org/licenses/LICENSE-2.0 |
<> | 128:9bcdf88f62b0 | 12 | * |
<> | 128:9bcdf88f62b0 | 13 | * Unless required by applicable law or agreed to in writing, software |
<> | 128:9bcdf88f62b0 | 14 | * distributed under the License is distributed on an "AS IS" BASIS, |
<> | 128:9bcdf88f62b0 | 15 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
<> | 128:9bcdf88f62b0 | 16 | * See the License for the specific language governing permissions and |
<> | 128:9bcdf88f62b0 | 17 | * limitations under the License. |
<> | 128:9bcdf88f62b0 | 18 | */ |
<> | 128:9bcdf88f62b0 | 19 | #ifndef MBED_ERROR_H |
<> | 128:9bcdf88f62b0 | 20 | #define MBED_ERROR_H |
<> | 128:9bcdf88f62b0 | 21 | |
<> | 128:9bcdf88f62b0 | 22 | /** To generate a fatal compile-time error, you can use the pre-processor #error directive. |
<> | 128:9bcdf88f62b0 | 23 | * |
<> | 128:9bcdf88f62b0 | 24 | * @code |
<> | 128:9bcdf88f62b0 | 25 | * #error "That shouldn't have happened!" |
<> | 128:9bcdf88f62b0 | 26 | * @endcode |
<> | 128:9bcdf88f62b0 | 27 | * |
<> | 128:9bcdf88f62b0 | 28 | * If the compiler evaluates this line, it will report the error and stop the compile. |
<> | 128:9bcdf88f62b0 | 29 | * |
<> | 128:9bcdf88f62b0 | 30 | * For example, you could use this to check some user-defined compile-time variables: |
<> | 128:9bcdf88f62b0 | 31 | * |
<> | 128:9bcdf88f62b0 | 32 | * @code |
<> | 128:9bcdf88f62b0 | 33 | * #define NUM_PORTS 7 |
<> | 128:9bcdf88f62b0 | 34 | * #if (NUM_PORTS > 4) |
<> | 128:9bcdf88f62b0 | 35 | * #error "NUM_PORTS must be less than 4" |
<> | 128:9bcdf88f62b0 | 36 | * #endif |
<> | 128:9bcdf88f62b0 | 37 | * @endcode |
<> | 128:9bcdf88f62b0 | 38 | * |
<> | 128:9bcdf88f62b0 | 39 | * Reporting Run-Time Errors: |
<> | 128:9bcdf88f62b0 | 40 | * To generate a fatal run-time error, you can use the mbed error() function. |
<> | 128:9bcdf88f62b0 | 41 | * |
<> | 128:9bcdf88f62b0 | 42 | * @code |
<> | 128:9bcdf88f62b0 | 43 | * error("That shouldn't have happened!"); |
<> | 128:9bcdf88f62b0 | 44 | * @endcode |
<> | 128:9bcdf88f62b0 | 45 | * |
<> | 128:9bcdf88f62b0 | 46 | * If the mbed running the program executes this function, it will print the |
<> | 128:9bcdf88f62b0 | 47 | * message via the USB serial port, and then die with the blue lights of death! |
<> | 128:9bcdf88f62b0 | 48 | * |
<> | 128:9bcdf88f62b0 | 49 | * The message can use printf-style formatting, so you can report variables in the |
<> | 128:9bcdf88f62b0 | 50 | * message too. For example, you could use this to check a run-time condition: |
<> | 128:9bcdf88f62b0 | 51 | * |
<> | 128:9bcdf88f62b0 | 52 | * @code |
<> | 128:9bcdf88f62b0 | 53 | * if(x >= 5) { |
<> | 128:9bcdf88f62b0 | 54 | * error("expected x to be less than 5, but got %d", x); |
<> | 128:9bcdf88f62b0 | 55 | * } |
<> | 128:9bcdf88f62b0 | 56 | * #endcode |
<> | 128:9bcdf88f62b0 | 57 | */ |
<> | 128:9bcdf88f62b0 | 58 | |
<> | 128:9bcdf88f62b0 | 59 | #ifdef __cplusplus |
<> | 128:9bcdf88f62b0 | 60 | extern "C" { |
<> | 128:9bcdf88f62b0 | 61 | #endif |
<> | 128:9bcdf88f62b0 | 62 | |
<> | 128:9bcdf88f62b0 | 63 | void error(const char* format, ...); |
<> | 128:9bcdf88f62b0 | 64 | |
<> | 128:9bcdf88f62b0 | 65 | #ifdef __cplusplus |
<> | 128:9bcdf88f62b0 | 66 | } |
<> | 128:9bcdf88f62b0 | 67 | #endif |
<> | 128:9bcdf88f62b0 | 68 | |
<> | 128:9bcdf88f62b0 | 69 | #endif |
<> | 128:9bcdf88f62b0 | 70 | |
<> | 128:9bcdf88f62b0 | 71 | /** @}*/ |