Diff: vendor/NXP/LPC812/hal/us_ticker.c

Revision:

10:3bc89ef62ce7

diff -r 0ce32e54c9a7 -r 3bc89ef62ce7 vendor/NXP/LPC812/hal/us_ticker.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/vendor/NXP/LPC812/hal/us_ticker.c	Fri Jun 14 17:49:17 2013 +0100
@@ -0,0 +1,93 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <stddef.h>
+#include "us_ticker_api.h"
+#include "PeripheralNames.h"
+
+#define US_TICKER_TIMER_IRQn     SCT_IRQn
+
+int us_ticker_inited = 0;
+
+void us_ticker_init(void) {
+    if (us_ticker_inited) return;
+    us_ticker_inited = 1;
+    
+    // Enable the SCT clock
+    LPC_SYSCON->SYSAHBCLKCTRL |= (1 << 8);
+    
+    // Clear peripheral reset the SCT:
+    LPC_SYSCON->PRESETCTRL |= (1 << 8);
+    
+    // Unified counter (32 bits)
+    LPC_SCT->CONFIG |= 1;
+    
+    // halt and clear the counter
+    LPC_SCT->CTRL_L |= (1 << 2) | (1 << 3);
+    
+    // System Clock (12)MHz -> us_ticker (1)MHz
+    LPC_SCT->CTRL_L |= ((SystemCoreClock/1000000 - 1) << 5);
+    
+    // unhalt the counter:
+    //    - clearing bit 2 of the CTRL register
+    LPC_SCT->CTRL_L &= ~(1 << 2);
+    
+    NVIC_SetVector(US_TICKER_TIMER_IRQn, (uint32_t)us_ticker_irq_handler);
+    NVIC_EnableIRQ(US_TICKER_TIMER_IRQn);
+}
+
+uint32_t us_ticker_read() {
+    if (!us_ticker_inited)
+        us_ticker_init();
+    
+    return LPC_SCT->COUNT_U;
+}
+
+void us_ticker_set_interrupt(unsigned int timestamp) {
+    // halt the counter: 
+    //    - setting bit 2 of the CTRL register
+    LPC_SCT->CTRL_L |= (1 << 2);
+    
+    // set timestamp in compare register
+    LPC_SCT->MATCH[0].U = timestamp;
+    
+    // unhalt the counter:
+    //    - clearing bit 2 of the CTRL register
+    LPC_SCT->CTRL_L &= ~(1 << 2);
+    
+    // if events are not enabled, enable them
+    if (!(LPC_SCT->EVEN & 0x01)) {
+        
+        // comb mode = match only
+        LPC_SCT->EVENT[0].CTRL = (1 << 12);
+        
+        // ref manual:
+        //   In simple applications that do not 
+        //   use states, write 0x01 to this 
+        //   register to enable an event
+        LPC_SCT->EVENT[0].STATE |= 0x1;
+        
+        // enable events
+        LPC_SCT->EVEN |= 0x1;
+    }
+}
+
+void us_ticker_disable_interrupt(void) {
+    LPC_SCT->EVEN &= ~1;
+}
+
+void us_ticker_clear_interrupt(void) {
+    LPC_SCT->EVFLAG = 1;
+}