Diff: vendor/NXP/LPC812/hal/us_ticker.c

Revision:

13:0645d8841f51

Parent:

12:5fa2273de5db

Child:

14:096882eb0961

diff -r 5fa2273de5db -r 0645d8841f51 vendor/NXP/LPC812/hal/us_ticker.c
--- a/vendor/NXP/LPC812/hal/us_ticker.c	Wed Jul 24 11:11:21 2013 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,93 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-#define US_TICKER_TIMER_IRQn     SCT_IRQn
-
-int us_ticker_inited = 0;
-
-void us_ticker_init(void) {
-    if (us_ticker_inited) return;
-    us_ticker_inited = 1;
-    
-    // Enable the SCT clock
-    LPC_SYSCON->SYSAHBCLKCTRL |= (1 << 8);
-    
-    // Clear peripheral reset the SCT:
-    LPC_SYSCON->PRESETCTRL |= (1 << 8);
-    
-    // Unified counter (32 bits)
-    LPC_SCT->CONFIG |= 1;
-    
-    // halt and clear the counter
-    LPC_SCT->CTRL_L |= (1 << 2) | (1 << 3);
-    
-    // System Clock (12)MHz -> us_ticker (1)MHz
-    LPC_SCT->CTRL_L |= ((SystemCoreClock/1000000 - 1) << 5);
-    
-    // unhalt the counter:
-    //    - clearing bit 2 of the CTRL register
-    LPC_SCT->CTRL_L &= ~(1 << 2);
-    
-    NVIC_SetVector(US_TICKER_TIMER_IRQn, (uint32_t)us_ticker_irq_handler);
-    NVIC_EnableIRQ(US_TICKER_TIMER_IRQn);
-}
-
-uint32_t us_ticker_read() {
-    if (!us_ticker_inited)
-        us_ticker_init();
-    
-    return LPC_SCT->COUNT_U;
-}
-
-void us_ticker_set_interrupt(unsigned int timestamp) {
-    // halt the counter: 
-    //    - setting bit 2 of the CTRL register
-    LPC_SCT->CTRL_L |= (1 << 2);
-    
-    // set timestamp in compare register
-    LPC_SCT->MATCH[0].U = timestamp;
-    
-    // unhalt the counter:
-    //    - clearing bit 2 of the CTRL register
-    LPC_SCT->CTRL_L &= ~(1 << 2);
-    
-    // if events are not enabled, enable them
-    if (!(LPC_SCT->EVEN & 0x01)) {
-        
-        // comb mode = match only
-        LPC_SCT->EVENT[0].CTRL = (1 << 12);
-        
-        // ref manual:
-        //   In simple applications that do not 
-        //   use states, write 0x01 to this 
-        //   register to enable an event
-        LPC_SCT->EVENT[0].STATE |= 0x1;
-        
-        // enable events
-        LPC_SCT->EVEN |= 0x1;
-    }
-}
-
-void us_ticker_disable_interrupt(void) {
-    LPC_SCT->EVEN &= ~1;
-}
-
-void us_ticker_clear_interrupt(void) {
-    LPC_SCT->EVFLAG = 1;
-}