Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependents: Freedman_v2 Nucleo_i2c_OLED_BME280_copy
Fork of mbed-src by
vendor/NXP/LPC4088/hal/analogout_api.c
- Committer:
- emimon01
- Date:
- 2013-07-24
- Revision:
- 12:5fa2273de5db
- Parent:
- 10:3bc89ef62ce7
File content as of revision 12:5fa2273de5db:
/* mbed Microcontroller Library
* Copyright (c) 2006-2013 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "analogout_api.h"
#include "cmsis.h"
#include "pinmap.h"
#include "error.h"
static const PinMap PinMap_DAC[] = {
{P0_26, DAC_0, 2},
{NC , NC , 0}
};
void analogout_init(dac_t *obj, PinName pin) {
obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
if (obj->dac == (uint32_t)NC) {
error("DAC pin mapping failed");
}
// DAC enable bit must be set
LPC_IOCON->P0_26 |= (1 << 16); // DACEN
// map out (must be done before accessing registers)
pinmap_pinout(pin, PinMap_DAC);
analogout_write_u16(obj, 0);
}
void analogout_free(dac_t *obj) {}
static inline void dac_write(int value) {
value &= 0x3FF; // 10-bit
// Set the DAC output
LPC_DAC->CR = (0 << 16) // bias = 0
| (value << 6);
}
static inline int dac_read() {
return (LPC_DAC->CR >> 6) & 0x3FF;
}
void analogout_write(dac_t *obj, float value) {
if (value < 0.0f) {
dac_write(0);
} else if (value > 1.0f) {
dac_write(0x3FF);
} else {
dac_write(value * (float)0x3FF);
}
}
void analogout_write_u16(dac_t *obj, uint16_t value) {
dac_write(value >> 6); // 10-bit
}
float analogout_read(dac_t *obj) {
uint32_t value = dac_read();
return (float)value * (1.0f / (float)0x3FF);
}
uint16_t analogout_read_u16(dac_t *obj) {
uint32_t value = dac_read(); // 10-bit
return (value << 6) | ((value >> 4) & 0x003F);
}
