Diff: NetworkInterface.h

Revision:

107:8b26e40c6e34

Parent:

106:c388f74d5111

Child:

108:2e5eccf30a84

diff -r c388f74d5111 -r 8b26e40c6e34 NetworkInterface.h
--- a/NetworkInterface.h	Tue Apr 19 18:30:33 2016 -0500
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,327 +0,0 @@
-/* NetworkInterface
- * Copyright (c) 2015 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef NETWORK_INTERFACE_H
-#define NETWORK_INTERFACE_H
-
-#include "mbed.h"
-#include "SocketAddress.h"
-
-
-/** Enum of standardized error codes 
- *
- *  Valid error codes have negative values and may
- *  be returned by any network operation.
- *
- *  @enum nsapi_error_t
- */
-enum nsapi_error_t {
-    NSAPI_ERROR_WOULD_BLOCK   = -3001,     /*!< no data is not available but call is non-blocking */
-    NSAPI_ERROR_UNSUPPORTED   = -3002,     /*!< unsupported configuration */
-    NSAPI_ERROR_NO_CONNECTION = -3003,     /*!< not connected to a network */
-    NSAPI_ERROR_NO_SOCKET     = -3004,     /*!< socket not available for use */
-    NSAPI_ERROR_NO_ADDRESS    = -3005,     /*!< IP address is not known */
-    NSAPI_ERROR_NO_MEMORY     = -3006,     /*!< memory resource not available */
-    NSAPI_ERROR_DNS_FAILURE   = -3007,     /*!< DNS failed to complete successfully */
-    NSAPI_ERROR_DHCP_FAILURE  = -3008,     /*!< DHCP failed to complete successfully */
-    NSAPI_ERROR_AUTH_FAILURE  = -3009,     /*!< connection to access point faield */
-    NSAPI_ERROR_DEVICE_ERROR  = -3010,     /*!< failure interfacing with the network procesor */
-};
-
-/** Enum of socket protocols
- *
- *  The socket protocol specifies a particular protocol to
- *  be used with a newly created socket. 
- *
- *  @enum nsapi_protocol_t
- */
-enum nsapi_protocol_t {
-   NSAPI_TCP, /*!< Socket is of TCP type */
-   NSAPI_UDP, /*!< Socket is of UDP type */
-};
-
-/** Maximum size of MAC address representation
- */
-#define NSAPI_MAC_SIZE 18
-
-/** Maximum number of bytes for MAC address
- */
-#define NSAPI_MAC_BYTES 6
-
-
-/** NetworkInterface class
- *
- *  Common interface that is shared between hardware that
- *  can connect to a network over IP. By implementing the
- *  NetworkInterface, a network stack can be used as a target
- *  for instantiating network sockets.
- */
-class NetworkInterface
-{
-public:
-    virtual ~NetworkInterface() {};
-
-    /** Get the local IP address
-     *
-     *  @return         Null-terminated representation of the local IP address
-     *                  or null if not yet connected
-     */
-    virtual const char *get_ip_address() = 0;
-
-    /** Get the local MAC address
-     *
-     *  @return         Null-terminated representation of the local MAC address
-     */
-    virtual const char *get_mac_address() = 0;
-
-    /** Translates a hostname to an IP address
-     *
-     *  The hostname may be either a domain name or an IP address. If the
-     *  hostname is an IP address, no network transactions will be performed.
-     *  
-     *  If no stack-specific DNS resolution is provided, the hostname
-     *  will be resolve using a UDP socket on the stack. 
-     *
-     *  @param address  Destination for the host SocketAddress
-     *  @param host     Hostname to resolve
-     *  @return         0 on success, negative error code on failure
-     */
-    virtual int gethostbyname(SocketAddress *address, const char *host);
-
-    /*  Set stack-specific stack options
-     *
-     *  The setstackopt allow an application to pass stack-specific hints
-     *  to the underlying stack. For unsupported options,
-     *  NSAPI_ERROR_UNSUPPORTED is returned and the stack is unmodified.
-     *
-     *  @param level    Stack-specific protocol level
-     *  @param optname  Stack-specific option identifier
-     *  @param optval   Option value
-     *  @param optlen   Length of the option value
-     *  @return         0 on success, negative error code on failure
-     */    
-    virtual int setstackopt(int level, int optname, const void *optval, unsigned optlen);
-
-    /*  Get stack-specific stack options
-     *
-     *  The getstackopt allow an application to retrieve stack-specific hints
-     *  from the underlying stack. For unsupported options,
-     *  NSAPI_ERROR_UNSUPPORTED is returned and optval is unmodified.
-     *
-     *  @param level    Stack-specific protocol level
-     *  @param optname  Stack-specific option identifier
-     *  @param optval   Destination for option value
-     *  @param optlen   Length of the option value
-     *  @return         0 on success, negative error code on failure
-     */    
-    virtual int getstackopt(int level, int optname, void *optval, unsigned *optlen);
-
-protected:
-    friend class Socket;
-    friend class UDPSocket;
-    friend class TCPSocket;
-    friend class TCPServer;
-
-    /** Opens a socket
-     *
-     *  Creates a network socket and stores it in the specified handle.
-     *  The handle must be passed to following calls on the socket.
-     *
-     *  A stack may have a finite number of sockets, in this case
-     *  NSAPI_ERROR_NO_SOCKET is returned if no socket is available.
-     *
-     *  @param handle   Destination for the handle to a newly created socket
-     *  @param proto    Protocol of socket to open, NSAPI_TCP or NSAPI_UDP
-     *  @return         0 on success, negative error code on failure
-     */
-    virtual int socket_open(void **handle, nsapi_protocol_t proto) = 0;
-
-    /** Close the socket
-     *
-     *  Closes any open connection and deallocates any memory associated
-     *  with the socket.
-     *
-     *  @param handle   Socket handle
-     *  @return         0 on success, negative error code on failure
-     */
-    virtual int socket_close(void *handle) = 0;
-
-    /** Bind a specific address to a socket
-     *
-     *  Binding a socket specifies the address and port on which to recieve
-     *  data. If the IP address is zeroed, only the port is bound.
-     *
-     *  @param handle   Socket handle
-     *  @param address  Local address to bind
-     *  @return         0 on success, negative error code on failure.
-     */
-    virtual int socket_bind(void *handle, const SocketAddress &address) = 0;
-
-    /** Listen for connections on a TCP socket
-     *
-     *  Marks the socket as a passive socket that can be used to accept
-     *  incoming connections.
-     *
-     *  @param handle   Socket handle
-     *  @param backlog  Number of pending connections that can be queued
-     *                  simultaneously
-     *  @return         0 on success, negative error code on failure
-     */
-    virtual int socket_listen(void *handle, int backlog) = 0;
-
-    /** Connects TCP socket to a remote host
-     *
-     *  Initiates a connection to a remote server specified by the
-     *  indicated address.
-     *
-     *  @param handle   Socket handle
-     *  @param address  The SocketAddress of the remote host
-     *  @return         0 on success, negative error code on failure
-     */
-    virtual int socket_connect(void *handle, const SocketAddress &address) = 0;
-
-    /** Accepts a connection on a TCP socket
-     *
-     *  The server socket must be bound and set to listen for connections.
-     *  On a new connection, creates a network socket and stores it in the
-     *  specified handle. The handle must be passed to following calls on
-     *  the socket.
-     *
-     *  A stack may have a finite number of sockets, in this case
-     *  NSAPI_ERROR_NO_SOCKET is returned if no socket is available.
-     *
-     *  This call is non-blocking. If accept would block,
-     *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
-     *
-     *  @param handle   Destination for a handle to the newly created sockey
-     *  @param server   Socket handle to server to accept from
-     *  @return         0 on success, negative error code on failure
-     */
-    virtual int socket_accept(void **handle, void *server) = 0;
-
-    /** Send data over a TCP socket
-     *
-     *  The socket must be connected to a remote host. Returns the number of
-     *  bytes sent from the buffer.
-     *
-     *  This call is non-blocking. If send would block,
-     *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
-     *
-     *  @param handle   Socket handle
-     *  @param data     Buffer of data to send to the host
-     *  @param size     Size of the buffer in bytes
-     *  @return         Number of sent bytes on success, negative error
-     *                  code on failure
-     */
-    virtual int socket_send(void *handle, const void *data, unsigned size) = 0;
-
-    /** Receive data over a TCP socket
-     *
-     *  The socket must be connected to a remote host. Returns the number of
-     *  bytes received into the buffer.
-     *
-     *  This call is non-blocking. If recv would block,
-     *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
-     *
-     *  @param handle   Socket handle
-     *  @param data     Destination buffer for data received from the host
-     *  @param size     Size of the buffer in bytes
-     *  @return         Number of received bytes on success, negative error
-     *                  code on failure
-     */
-    virtual int socket_recv(void *handle, void *data, unsigned size) = 0;
-
-    /** Send a packet over a UDP socket
-     *
-     *  Sends data to the specified address. Returns the number of bytes
-     *  sent from the buffer.
-     *
-     *  This call is non-blocking. If sendto would block,
-     *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
-     *
-     *  @param handle   Socket handle
-     *  @param address  The SocketAddress of the remote host
-     *  @param data     Buffer of data to send to the host
-     *  @param size     Size of the buffer in bytes
-     *  @return         Number of sent bytes on success, negative error
-     *                  code on failure
-     */
-    virtual int socket_sendto(void *handle, const SocketAddress &address, const void *data, unsigned size) = 0;
-
-    /** Receive a packet over a UDP socket
-     *
-     *  Receives data and stores the source address in address if address
-     *  is not NULL. Returns the number of bytes received into the buffer.
-     *
-     *  This call is non-blocking. If recvfrom would block,
-     *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
-     *
-     *  @param handle   Socket handle
-     *  @param address  Destination for the source address or NULL
-     *  @param data     Destination buffer for data received from the host
-     *  @param size     Size of the buffer in bytes
-     *  @return         Number of received bytes on success, negative error
-     *                  code on failure
-     */
-    virtual int socket_recvfrom(void *handle, SocketAddress *address, void *buffer, unsigned size) = 0;
-
-    /** Register a callback on state change of the socket
-     *
-     *  The specified callback will be called on state changes such as when
-     *  the socket can recv/send/accept successfully and on when an error
-     *  occurs. The callback may also be called spuriously without reason.
-     *
-     *  The callback may be called in an interrupt context and should not
-     *  perform expensive operations such as recv/send calls.
-     *
-     *  @param handle   Socket handle
-     *  @param callback Function to call on state change
-     *  @param data     Argument to pass to callback
-     */
-    virtual void socket_attach(void *handle, void (*callback)(void *), void *data) = 0;
-
-    /*  Set stack-specific socket options
-     *
-     *  The setsockopt allow an application to pass stack-specific hints
-     *  to the underlying stack. For unsupported options,
-     *  NSAPI_ERROR_UNSUPPORTED is returned and the socket is unmodified.
-     *
-     *  @param handle   Socket handle
-     *  @param level    Stack-specific protocol level
-     *  @param optname  Stack-specific option identifier
-     *  @param optval   Option value
-     *  @param optlen   Length of the option value
-     *  @return         0 on success, negative error code on failure
-     */    
-    virtual int setsockopt(void *handle, int level, int optname, const void *optval, unsigned optlen);
-
-    /*  Get stack-specific socket options
-     *
-     *  The getstackopt allow an application to retrieve stack-specific hints
-     *  from the underlying stack. For unsupported options,
-     *  NSAPI_ERROR_UNSUPPORTED is returned and optval is unmodified.
-     *
-     *  @param handle   Socket handle
-     *  @param level    Stack-specific protocol level
-     *  @param optname  Stack-specific option identifier
-     *  @param optval   Destination for option value
-     *  @param optlen   Length of the option value
-     *  @return         0 on success, negative error code on failure
-     */    
-    virtual int getsockopt(void *handle, int level, int optname, void *optval, unsigned *optlen);
-};
-
-#endif