Diff: mbed-os/TESTS/mbed_drivers/lp_timer/main.cpp

Revision:

0:8fdf9a60065b

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os/TESTS/mbed_drivers/lp_timer/main.cpp	Wed Oct 10 00:33:53 2018 +0000
@@ -0,0 +1,352 @@
+/*
+ * Copyright (c) 2017, ARM Limited, All Rights Reserved
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "mbed.h"
+#include "greentea-client/test_env.h"
+#include "unity.h"
+#include "utest.h"
+#include "rtos.h"
+#include "hal/us_ticker_api.h"
+
+#if !DEVICE_LPTICKER
+#error [NOT_SUPPORTED] test not supported
+#endif
+
+using namespace utest::v1;
+
+extern uint32_t SystemCoreClock;
+
+/* This test is created based on the test for Timer class.
+ * Since low power timer is less accurate than regular
+ * timer we need to adjust delta.
+ */
+
+/*
+* Define tolerance as follows:
+* tolerance = 500 us + 5% of measured time
+*
+* e.g.
+* 1 ms delay: tolerance = 550 us
+* 10 ms delay: tolerance = 1000 us
+* 100 ms delay: tolerance = 5500 us
+* 1000 ms delay: tolerance = 50500 us
+*
+*  */
+
+#define US_PER_SEC       1000000
+#define US_PER_MSEC      1000
+#define MSEC_PER_SEC     1000
+
+#define DELTA_US(delay_ms) (500 + (delay_ms) * US_PER_MSEC / 20)
+#define DELTA_MS(delay_ms) (1 + ((delay_ms) * US_PER_MSEC / 20 / US_PER_MSEC))
+#define DELTA_S(delay_ms) (0.000500f + (((float)(delay_ms)) / MSEC_PER_SEC / 20))
+
+void busy_wait_us(int us)
+{
+    const ticker_data_t *const ticker = get_us_ticker_data();
+    uint32_t start = ticker_read(ticker);
+    while ((ticker_read(ticker) - start) < (uint32_t)us);
+}
+
+void busy_wait_ms(int ms)
+{
+    busy_wait_us(ms * US_PER_MSEC);
+}
+
+/* This test verifies if low power timer is stopped after
+ * creation.
+ *
+ * Given Timer has been successfully created.
+ * When read of timer elapsed time is requested.
+ * Then result is always 0.
+ */
+void test_lptimer_creation()
+{
+    LowPowerTimer lp_timer;
+
+    /* Check results. */
+    TEST_ASSERT_EQUAL_FLOAT(0, lp_timer.read());
+    TEST_ASSERT_EQUAL_INT32(0, lp_timer.read_ms());
+    TEST_ASSERT_EQUAL_INT32(0, lp_timer.read_us());
+    TEST_ASSERT_EQUAL_UINT64(0, lp_timer.read_high_resolution_us());
+
+    /* Wait 10 ms.
+     * After that operation timer read routines should still return 0. */
+    busy_wait_ms(10);
+
+    /* Check results. */
+    TEST_ASSERT_EQUAL_FLOAT(0, lp_timer.read());
+    TEST_ASSERT_EQUAL_INT32(0, lp_timer.read_ms());
+    TEST_ASSERT_EQUAL_INT32(0, lp_timer.read_us());
+    TEST_ASSERT_EQUAL_UINT64(0, lp_timer.read_high_resolution_us());
+}
+
+/* This test verifies if read(), read_us(), read_ms(),
+ * read_high_resolution_us()
+ * functions return time accumulated between
+ * low power timer starts and stops.
+ *
+ * Given Timer has been successfully created and
+ * few times started and stopped after a specified period of time.
+ * When timer read request is performed.
+ * Then read functions return accumulated time elapsed between starts
+ * and stops.
+ */
+void test_lptimer_time_accumulation()
+{
+    LowPowerTimer lp_timer;
+
+    /* Start the timer. */
+    lp_timer.start();
+
+    /* Wait 10 ms. */
+    busy_wait_ms(10);
+
+    /* Stop the timer. */
+    lp_timer.stop();
+
+    /* Check results - totally 10 ms have elapsed. */
+    TEST_ASSERT_FLOAT_WITHIN(DELTA_S(10), 0.010f, lp_timer.read());
+    TEST_ASSERT_INT32_WITHIN(DELTA_MS(10), 10, lp_timer.read_ms());
+    TEST_ASSERT_INT32_WITHIN(DELTA_US(10), 10000, lp_timer.read_us());
+    TEST_ASSERT_UINT64_WITHIN(DELTA_US(10), 10000, lp_timer.read_high_resolution_us());
+
+    /* Wait 50 ms - this is done to show that time elapsed when
+     * the timer is stopped does not have influence on the
+     * timer counted time. */
+    busy_wait_ms(50);
+
+    /* ------ */
+
+    /* Start the timer. */
+    lp_timer.start();
+
+    /* Wait 20 ms. */
+    busy_wait_ms(20);
+
+    /* Stop the timer. */
+    lp_timer.stop();
+
+    /* Check results - totally 30 ms have elapsed. */
+    TEST_ASSERT_FLOAT_WITHIN(DELTA_S(30), 0.030f, lp_timer.read());
+    TEST_ASSERT_INT32_WITHIN(DELTA_MS(30), 30, lp_timer.read_ms());
+    TEST_ASSERT_INT32_WITHIN(DELTA_US(30), 30000, lp_timer.read_us());
+    TEST_ASSERT_UINT64_WITHIN(DELTA_US(30), 30000, lp_timer.read_high_resolution_us());
+
+    /* Wait 50 ms - this is done to show that time elapsed when
+     * the timer is stopped does not have influence on the
+     * timer counted time. */
+
+    /* ------ */
+
+    /* Start the timer. */
+    lp_timer.start();
+
+    /* Wait 30 ms. */
+    busy_wait_ms(30);
+
+    /* Stop the timer. */
+    lp_timer.stop();
+
+    /* Check results - totally 60 ms have elapsed. */
+    TEST_ASSERT_FLOAT_WITHIN(DELTA_S(60), 0.060f, lp_timer.read());
+    TEST_ASSERT_INT32_WITHIN(DELTA_MS(60), 60, lp_timer.read_ms());
+    TEST_ASSERT_INT32_WITHIN(DELTA_US(60), 60000, lp_timer.read_us());
+    TEST_ASSERT_UINT64_WITHIN(DELTA_US(60), 60000, lp_timer.read_high_resolution_us());
+
+    /* Wait 50 ms - this is done to show that time elapsed when
+     * the timer is stopped does not have influence on the
+     * timer time. */
+    busy_wait_ms(50);
+
+    /* ------ */
+
+    /* Start the timer. */
+    lp_timer.start();
+
+    /* Wait 1 sec. */
+    busy_wait_ms(1000);
+
+    /* Stop the timer. */
+    lp_timer.stop();
+
+    /* Check results - totally 1060 ms have elapsed. */
+    TEST_ASSERT_FLOAT_WITHIN(DELTA_S(1060), 1.060f, lp_timer.read());
+    TEST_ASSERT_INT32_WITHIN(DELTA_MS(1060), 1060, lp_timer.read_ms());
+    TEST_ASSERT_INT32_WITHIN(DELTA_US(1060), 1060000, lp_timer.read_us());
+    TEST_ASSERT_UINT64_WITHIN(DELTA_US(1060), 1060000, lp_timer.read_high_resolution_us());
+}
+
+/* This test verifies if reset() function resets the
+ * low power timer counted time.
+ *
+ * Given timer has been started and stopped once, then reset
+ * operation was performed.
+ * When timer is started and stopped next time.
+ * Then timer read functions returns only the the second
+ * measured time.
+ */
+void test_lptimer_reset()
+{
+    LowPowerTimer lp_timer;
+
+    /* First measure 10 ms delay. */
+    lp_timer.start();
+
+    /* Wait 10 ms. */
+    busy_wait_ms(10);
+
+    /* Stop the timer. */
+    lp_timer.stop();
+
+    /* Check results - totally 10 ms elapsed. */
+    TEST_ASSERT_FLOAT_WITHIN(DELTA_S(10), 0.010f, lp_timer.read());
+    TEST_ASSERT_INT32_WITHIN(DELTA_MS(10), 10, lp_timer.read_ms());
+    TEST_ASSERT_INT32_WITHIN(DELTA_US(10), 10000, lp_timer.read_us());
+    TEST_ASSERT_UINT64_WITHIN(DELTA_US(10), 10000, lp_timer.read_high_resolution_us());
+
+    /* Reset the timer - previous measured time should be lost now. */
+    lp_timer.reset();
+
+    /* Now measure 20 ms delay. */
+    lp_timer.start();
+
+    /* Wait 20 ms. */
+    busy_wait_ms(20);
+
+    /* Stop the timer. */
+    lp_timer.stop();
+
+    /* Check results - 20 ms elapsed since the reset. */
+    TEST_ASSERT_FLOAT_WITHIN(DELTA_S(20), 0.020f, lp_timer.read());
+    TEST_ASSERT_INT32_WITHIN(DELTA_MS(20), 20, lp_timer.read_ms());
+    TEST_ASSERT_INT32_WITHIN(DELTA_US(20), 20000, lp_timer.read_us());
+    TEST_ASSERT_UINT64_WITHIN(DELTA_US(20), 20000, lp_timer.read_high_resolution_us());
+}
+
+/* This test verifies if calling start() for already
+ * started low power timer does nothing.
+ *
+ * Given timer is already started.
+ * When timer is started again.
+ * Then second start operation is ignored.
+ */
+void test_lptimer_start_started_timer()
+{
+    LowPowerTimer lp_timer;
+
+    /* Start the timer. */
+    lp_timer.start();
+
+    /* Wait 10 ms. */
+    busy_wait_ms(10);
+
+    /* Now start timer again. */
+    lp_timer.start();
+
+    /* Wait 20 ms. */
+    busy_wait_ms(20);
+
+    /* Stop the timer. */
+    lp_timer.stop();
+
+    /* Check results - 30 ms have elapsed since the first start. */
+    TEST_ASSERT_FLOAT_WITHIN(DELTA_S(30), 0.030f, lp_timer.read());
+    TEST_ASSERT_INT32_WITHIN(DELTA_MS(30), 30, lp_timer.read_ms());
+    TEST_ASSERT_INT32_WITHIN(DELTA_US(30), 30000, lp_timer.read_us());
+    TEST_ASSERT_UINT64_WITHIN(DELTA_US(30), 30000, lp_timer.read_high_resolution_us());
+}
+
+/* This test verifies low power timer float operator.
+ *
+ * Given timer is created and a time period time is counted.
+ * When timer object is casted on float type.
+ * Then counted type in seconds is returned by means of
+ * read() function.
+ */
+void test_lptimer_float_operator()
+{
+    LowPowerTimer lp_timer;
+
+    /* Start the timer. */
+    lp_timer.start();
+
+    /* Wait 10 ms. */
+    busy_wait_ms(10);
+
+    /* Stop the timer. */
+    lp_timer.stop();
+
+    /* Check result - 10 ms elapsed. */
+    TEST_ASSERT_FLOAT_WITHIN(DELTA_S(10), 0.010f, (float)(lp_timer));
+}
+
+/* This test verifies if time counted by the low power timer is
+ * valid.
+ *
+ * Given timer is created.
+ * When timer is used to measure 1ms/10ms/100ms/1s
+ * delays.
+ * Then the results are valid (within acceptable range).
+ */
+template<int wait_val_us>
+void test_lptimer_time_measurement()
+{
+    LowPowerTimer lp_timer;
+
+    const int delta_ms = (wait_val_us / US_PER_MSEC);
+
+    /* Start the timer. */
+    lp_timer.start();
+
+    /* Wait <wait_val_us> us. */
+    busy_wait_us(wait_val_us);
+
+    /* Stop the timer. */
+    lp_timer.stop();
+
+    /* Check results - wait_val_us us have elapsed. */
+    TEST_ASSERT_FLOAT_WITHIN(DELTA_S(delta_ms), (float)wait_val_us / 1000000, lp_timer.read());
+    TEST_ASSERT_INT32_WITHIN(DELTA_MS(delta_ms), wait_val_us / 1000, lp_timer.read_ms());
+    TEST_ASSERT_INT32_WITHIN(DELTA_US(delta_ms), wait_val_us, lp_timer.read_us());
+    TEST_ASSERT_UINT64_WITHIN(DELTA_US(delta_ms), wait_val_us, lp_timer.read_high_resolution_us());
+}
+
+utest::v1::status_t test_setup(const size_t number_of_cases)
+{
+    GREENTEA_SETUP(15, "default_auto");
+    return verbose_test_setup_handler(number_of_cases);
+}
+
+Case cases[] = {
+    Case("Test: LowPowerTimer - stopped after creation.", test_lptimer_creation),
+    Case("Test: LowPowerTimer - measure time accumulation.", test_lptimer_time_accumulation),
+    Case("Test: LowPowerTimer - reset.", test_lptimer_reset),
+    Case("Test: LowPowerTimer - start started timer.", test_lptimer_start_started_timer),
+    Case("Test: LowPowerTimer - float operator.", test_lptimer_float_operator),
+    Case("Test: LowPowerTimer - time measurement 1 ms.", test_lptimer_time_measurement<1000>),
+    Case("Test: LowPowerTimer - time measurement 10 ms.", test_lptimer_time_measurement<10000>),
+    Case("Test: LowPowerTimer - time measurement 100 ms.", test_lptimer_time_measurement<100000>),
+    Case("Test: LowPowerTimer - time measurement 1 s.", test_lptimer_time_measurement<1000000>)
+};
+
+Specification specification(test_setup, cases);
+
+int main()
+{
+    return !Harness::run(specification);
+}