takashi kadono / Mbed OS Nucleo_446

Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466

Dependencies:   ssd1331

mbed-os/drivers/UARTSerial.h@0:8fdf9a60065b, 2018-10-10 (annotated)

Committer:
kadonotakashi
Date:
Wed Oct 10 00:33:53 2018 +0000
Revision:
0:8fdf9a60065b
how to make mbed librry

Who changed what in which revision?

UserRevisionLine numberNew contents of line
kadonotakashi 0:8fdf9a60065b 1 /* mbed Microcontroller Library
kadonotakashi 0:8fdf9a60065b 2 * Copyright (c) 2006-2017 ARM Limited
kadonotakashi 0:8fdf9a60065b 3 *
kadonotakashi 0:8fdf9a60065b 4 * Licensed under the Apache License, Version 2.0 (the "License");
kadonotakashi 0:8fdf9a60065b 5 * you may not use this file except in compliance with the License.
kadonotakashi 0:8fdf9a60065b 6 * You may obtain a copy of the License at
kadonotakashi 0:8fdf9a60065b 7 *
kadonotakashi 0:8fdf9a60065b 8 * http://www.apache.org/licenses/LICENSE-2.0
kadonotakashi 0:8fdf9a60065b 9 *
kadonotakashi 0:8fdf9a60065b 10 * Unless required by applicable law or agreed to in writing, software
kadonotakashi 0:8fdf9a60065b 11 * distributed under the License is distributed on an "AS IS" BASIS,
kadonotakashi 0:8fdf9a60065b 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
kadonotakashi 0:8fdf9a60065b 13 * See the License for the specific language governing permissions and
kadonotakashi 0:8fdf9a60065b 14 * limitations under the License.
kadonotakashi 0:8fdf9a60065b 15 */
kadonotakashi 0:8fdf9a60065b 16
kadonotakashi 0:8fdf9a60065b 17 #ifndef MBED_UARTSERIAL_H
kadonotakashi 0:8fdf9a60065b 18 #define MBED_UARTSERIAL_H
kadonotakashi 0:8fdf9a60065b 19
kadonotakashi 0:8fdf9a60065b 20 #include "platform/platform.h"
kadonotakashi 0:8fdf9a60065b 21
kadonotakashi 0:8fdf9a60065b 22 #if (DEVICE_SERIAL && DEVICE_INTERRUPTIN) || defined(DOXYGEN_ONLY)
kadonotakashi 0:8fdf9a60065b 23
kadonotakashi 0:8fdf9a60065b 24 #include "platform/FileHandle.h"
kadonotakashi 0:8fdf9a60065b 25 #include "SerialBase.h"
kadonotakashi 0:8fdf9a60065b 26 #include "InterruptIn.h"
kadonotakashi 0:8fdf9a60065b 27 #include "platform/PlatformMutex.h"
kadonotakashi 0:8fdf9a60065b 28 #include "hal/serial_api.h"
kadonotakashi 0:8fdf9a60065b 29 #include "platform/CircularBuffer.h"
kadonotakashi 0:8fdf9a60065b 30 #include "platform/NonCopyable.h"
kadonotakashi 0:8fdf9a60065b 31
kadonotakashi 0:8fdf9a60065b 32 #ifndef MBED_CONF_DRIVERS_UART_SERIAL_RXBUF_SIZE
kadonotakashi 0:8fdf9a60065b 33 #define MBED_CONF_DRIVERS_UART_SERIAL_RXBUF_SIZE 256
kadonotakashi 0:8fdf9a60065b 34 #endif
kadonotakashi 0:8fdf9a60065b 35
kadonotakashi 0:8fdf9a60065b 36 #ifndef MBED_CONF_DRIVERS_UART_SERIAL_TXBUF_SIZE
kadonotakashi 0:8fdf9a60065b 37 #define MBED_CONF_DRIVERS_UART_SERIAL_TXBUF_SIZE 256
kadonotakashi 0:8fdf9a60065b 38 #endif
kadonotakashi 0:8fdf9a60065b 39
kadonotakashi 0:8fdf9a60065b 40 namespace mbed {
kadonotakashi 0:8fdf9a60065b 41
kadonotakashi 0:8fdf9a60065b 42 /** \addtogroup drivers */
kadonotakashi 0:8fdf9a60065b 43
kadonotakashi 0:8fdf9a60065b 44 /** Class providing buffered UART communication functionality using separate circular buffer for send and receive channels
kadonotakashi 0:8fdf9a60065b 45 *
kadonotakashi 0:8fdf9a60065b 46 * @ingroup drivers
kadonotakashi 0:8fdf9a60065b 47 */
kadonotakashi 0:8fdf9a60065b 48
kadonotakashi 0:8fdf9a60065b 49 class UARTSerial : private SerialBase, public FileHandle, private NonCopyable<UARTSerial> {
kadonotakashi 0:8fdf9a60065b 50
kadonotakashi 0:8fdf9a60065b 51 public:
kadonotakashi 0:8fdf9a60065b 52
kadonotakashi 0:8fdf9a60065b 53 /** Create a UARTSerial port, connected to the specified transmit and receive pins, with a particular baud rate.
kadonotakashi 0:8fdf9a60065b 54 * @param tx Transmit pin
kadonotakashi 0:8fdf9a60065b 55 * @param rx Receive pin
kadonotakashi 0:8fdf9a60065b 56 * @param baud The baud rate of the serial port (optional, defaults to MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE)
kadonotakashi 0:8fdf9a60065b 57 */
kadonotakashi 0:8fdf9a60065b 58 UARTSerial(PinName tx, PinName rx, int baud = MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE);
kadonotakashi 0:8fdf9a60065b 59 virtual ~UARTSerial();
kadonotakashi 0:8fdf9a60065b 60
kadonotakashi 0:8fdf9a60065b 61 /** Equivalent to POSIX poll(). Derived from FileHandle.
kadonotakashi 0:8fdf9a60065b 62 * Provides a mechanism to multiplex input/output over a set of file handles.
kadonotakashi 0:8fdf9a60065b 63 */
kadonotakashi 0:8fdf9a60065b 64 virtual short poll(short events) const;
kadonotakashi 0:8fdf9a60065b 65
kadonotakashi 0:8fdf9a60065b 66 /* Resolve ambiguities versus our private SerialBase
kadonotakashi 0:8fdf9a60065b 67 * (for writable, spelling differs, but just in case)
kadonotakashi 0:8fdf9a60065b 68 */
kadonotakashi 0:8fdf9a60065b 69 using FileHandle::readable;
kadonotakashi 0:8fdf9a60065b 70 using FileHandle::writable;
kadonotakashi 0:8fdf9a60065b 71
kadonotakashi 0:8fdf9a60065b 72 /** Write the contents of a buffer to a file
kadonotakashi 0:8fdf9a60065b 73 *
kadonotakashi 0:8fdf9a60065b 74 * Follows POSIX semantics:
kadonotakashi 0:8fdf9a60065b 75 *
kadonotakashi 0:8fdf9a60065b 76 * * if blocking, block until all data is written
kadonotakashi 0:8fdf9a60065b 77 * * if no data can be written, and non-blocking set, return -EAGAIN
kadonotakashi 0:8fdf9a60065b 78 * * if some data can be written, and non-blocking set, write partial
kadonotakashi 0:8fdf9a60065b 79 *
kadonotakashi 0:8fdf9a60065b 80 * @param buffer The buffer to write from
kadonotakashi 0:8fdf9a60065b 81 * @param length The number of bytes to write
kadonotakashi 0:8fdf9a60065b 82 * @return The number of bytes written, negative error on failure
kadonotakashi 0:8fdf9a60065b 83 */
kadonotakashi 0:8fdf9a60065b 84 virtual ssize_t write(const void *buffer, size_t length);
kadonotakashi 0:8fdf9a60065b 85
kadonotakashi 0:8fdf9a60065b 86 /** Read the contents of a file into a buffer
kadonotakashi 0:8fdf9a60065b 87 *
kadonotakashi 0:8fdf9a60065b 88 * Follows POSIX semantics:
kadonotakashi 0:8fdf9a60065b 89 *
kadonotakashi 0:8fdf9a60065b 90 * * if no data is available, and non-blocking set return -EAGAIN
kadonotakashi 0:8fdf9a60065b 91 * * if no data is available, and blocking set, wait until data is available
kadonotakashi 0:8fdf9a60065b 92 * * If any data is available, call returns immediately
kadonotakashi 0:8fdf9a60065b 93 *
kadonotakashi 0:8fdf9a60065b 94 * @param buffer The buffer to read in to
kadonotakashi 0:8fdf9a60065b 95 * @param length The number of bytes to read
kadonotakashi 0:8fdf9a60065b 96 * @return The number of bytes read, 0 at end of file, negative error on failure
kadonotakashi 0:8fdf9a60065b 97 */
kadonotakashi 0:8fdf9a60065b 98 virtual ssize_t read(void *buffer, size_t length);
kadonotakashi 0:8fdf9a60065b 99
kadonotakashi 0:8fdf9a60065b 100 /** Close a file
kadonotakashi 0:8fdf9a60065b 101 *
kadonotakashi 0:8fdf9a60065b 102 * @return 0 on success, negative error code on failure
kadonotakashi 0:8fdf9a60065b 103 */
kadonotakashi 0:8fdf9a60065b 104 virtual int close();
kadonotakashi 0:8fdf9a60065b 105
kadonotakashi 0:8fdf9a60065b 106 /** Check if the file in an interactive terminal device
kadonotakashi 0:8fdf9a60065b 107 *
kadonotakashi 0:8fdf9a60065b 108 * @return True if the file is a terminal
kadonotakashi 0:8fdf9a60065b 109 * @return False if the file is not a terminal
kadonotakashi 0:8fdf9a60065b 110 * @return Negative error code on failure
kadonotakashi 0:8fdf9a60065b 111 */
kadonotakashi 0:8fdf9a60065b 112 virtual int isatty();
kadonotakashi 0:8fdf9a60065b 113
kadonotakashi 0:8fdf9a60065b 114 /** Move the file position to a given offset from from a given location
kadonotakashi 0:8fdf9a60065b 115 *
kadonotakashi 0:8fdf9a60065b 116 * Not valid for a device type FileHandle like UARTSerial.
kadonotakashi 0:8fdf9a60065b 117 * In case of UARTSerial, returns ESPIPE
kadonotakashi 0:8fdf9a60065b 118 *
kadonotakashi 0:8fdf9a60065b 119 * @param offset The offset from whence to move to
kadonotakashi 0:8fdf9a60065b 120 * @param whence The start of where to seek
kadonotakashi 0:8fdf9a60065b 121 * SEEK_SET to start from beginning of file,
kadonotakashi 0:8fdf9a60065b 122 * SEEK_CUR to start from current position in file,
kadonotakashi 0:8fdf9a60065b 123 * SEEK_END to start from end of file
kadonotakashi 0:8fdf9a60065b 124 * @return The new offset of the file, negative error code on failure
kadonotakashi 0:8fdf9a60065b 125 */
kadonotakashi 0:8fdf9a60065b 126 virtual off_t seek(off_t offset, int whence);
kadonotakashi 0:8fdf9a60065b 127
kadonotakashi 0:8fdf9a60065b 128 /** Flush any buffers associated with the file
kadonotakashi 0:8fdf9a60065b 129 *
kadonotakashi 0:8fdf9a60065b 130 * @return 0 on success, negative error code on failure
kadonotakashi 0:8fdf9a60065b 131 */
kadonotakashi 0:8fdf9a60065b 132 virtual int sync();
kadonotakashi 0:8fdf9a60065b 133
kadonotakashi 0:8fdf9a60065b 134 /** Set blocking or non-blocking mode
kadonotakashi 0:8fdf9a60065b 135 * The default is blocking.
kadonotakashi 0:8fdf9a60065b 136 *
kadonotakashi 0:8fdf9a60065b 137 * @param blocking true for blocking mode, false for non-blocking mode.
kadonotakashi 0:8fdf9a60065b 138 */
kadonotakashi 0:8fdf9a60065b 139 virtual int set_blocking(bool blocking)
kadonotakashi 0:8fdf9a60065b 140 {
kadonotakashi 0:8fdf9a60065b 141 _blocking = blocking;
kadonotakashi 0:8fdf9a60065b 142 return 0;
kadonotakashi 0:8fdf9a60065b 143 }
kadonotakashi 0:8fdf9a60065b 144
kadonotakashi 0:8fdf9a60065b 145 /** Check current blocking or non-blocking mode for file operations.
kadonotakashi 0:8fdf9a60065b 146 *
kadonotakashi 0:8fdf9a60065b 147 * @return true for blocking mode, false for non-blocking mode.
kadonotakashi 0:8fdf9a60065b 148 */
kadonotakashi 0:8fdf9a60065b 149 virtual bool is_blocking() const
kadonotakashi 0:8fdf9a60065b 150 {
kadonotakashi 0:8fdf9a60065b 151 return _blocking;
kadonotakashi 0:8fdf9a60065b 152 }
kadonotakashi 0:8fdf9a60065b 153
kadonotakashi 0:8fdf9a60065b 154 /** Register a callback on state change of the file.
kadonotakashi 0:8fdf9a60065b 155 *
kadonotakashi 0:8fdf9a60065b 156 * The specified callback will be called on state changes such as when
kadonotakashi 0:8fdf9a60065b 157 * the file can be written to or read from.
kadonotakashi 0:8fdf9a60065b 158 *
kadonotakashi 0:8fdf9a60065b 159 * The callback may be called in an interrupt context and should not
kadonotakashi 0:8fdf9a60065b 160 * perform expensive operations.
kadonotakashi 0:8fdf9a60065b 161 *
kadonotakashi 0:8fdf9a60065b 162 * Note! This is not intended as an attach-like asynchronous api, but rather
kadonotakashi 0:8fdf9a60065b 163 * as a building block for constructing such functionality.
kadonotakashi 0:8fdf9a60065b 164 *
kadonotakashi 0:8fdf9a60065b 165 * The exact timing of when the registered function
kadonotakashi 0:8fdf9a60065b 166 * is called is not guaranteed and susceptible to change. It should be used
kadonotakashi 0:8fdf9a60065b 167 * as a cue to make read/write/poll calls to find the current state.
kadonotakashi 0:8fdf9a60065b 168 *
kadonotakashi 0:8fdf9a60065b 169 * @param func Function to call on state change
kadonotakashi 0:8fdf9a60065b 170 */
kadonotakashi 0:8fdf9a60065b 171 virtual void sigio(Callback<void()> func);
kadonotakashi 0:8fdf9a60065b 172
kadonotakashi 0:8fdf9a60065b 173 /** Setup interrupt handler for DCD line
kadonotakashi 0:8fdf9a60065b 174 *
kadonotakashi 0:8fdf9a60065b 175 * If DCD line is connected, an IRQ handler will be setup.
kadonotakashi 0:8fdf9a60065b 176 * Does nothing if DCD is NC, i.e., not connected.
kadonotakashi 0:8fdf9a60065b 177 *
kadonotakashi 0:8fdf9a60065b 178 * @param dcd_pin Pin-name for DCD
kadonotakashi 0:8fdf9a60065b 179 * @param active_high a boolean set to true if DCD polarity is active low
kadonotakashi 0:8fdf9a60065b 180 */
kadonotakashi 0:8fdf9a60065b 181 void set_data_carrier_detect(PinName dcd_pin, bool active_high = false);
kadonotakashi 0:8fdf9a60065b 182
kadonotakashi 0:8fdf9a60065b 183 /** Set the baud rate
kadonotakashi 0:8fdf9a60065b 184 *
kadonotakashi 0:8fdf9a60065b 185 * @param baud The baud rate
kadonotakashi 0:8fdf9a60065b 186 */
kadonotakashi 0:8fdf9a60065b 187 void set_baud(int baud);
kadonotakashi 0:8fdf9a60065b 188
kadonotakashi 0:8fdf9a60065b 189 // Expose private SerialBase::Parity as UARTSerial::Parity
kadonotakashi 0:8fdf9a60065b 190 using SerialBase::Parity;
kadonotakashi 0:8fdf9a60065b 191 // In C++11, we wouldn't need to also have using directives for each value
kadonotakashi 0:8fdf9a60065b 192 using SerialBase::None;
kadonotakashi 0:8fdf9a60065b 193 using SerialBase::Odd;
kadonotakashi 0:8fdf9a60065b 194 using SerialBase::Even;
kadonotakashi 0:8fdf9a60065b 195 using SerialBase::Forced1;
kadonotakashi 0:8fdf9a60065b 196 using SerialBase::Forced0;
kadonotakashi 0:8fdf9a60065b 197
kadonotakashi 0:8fdf9a60065b 198 /** Set the transmission format used by the serial port
kadonotakashi 0:8fdf9a60065b 199 *
kadonotakashi 0:8fdf9a60065b 200 * @param bits The number of bits in a word (5-8; default = 8)
kadonotakashi 0:8fdf9a60065b 201 * @param parity The parity used (None, Odd, Even, Forced1, Forced0; default = None)
kadonotakashi 0:8fdf9a60065b 202 * @param stop_bits The number of stop bits (1 or 2; default = 1)
kadonotakashi 0:8fdf9a60065b 203 */
kadonotakashi 0:8fdf9a60065b 204 void set_format(int bits = 8, Parity parity = UARTSerial::None, int stop_bits = 1);
kadonotakashi 0:8fdf9a60065b 205
kadonotakashi 0:8fdf9a60065b 206 #if DEVICE_SERIAL_FC
kadonotakashi 0:8fdf9a60065b 207 // For now use the base enum - but in future we may have extra options
kadonotakashi 0:8fdf9a60065b 208 // such as XON/XOFF or manual GPIO RTSCTS.
kadonotakashi 0:8fdf9a60065b 209 using SerialBase::Flow;
kadonotakashi 0:8fdf9a60065b 210 // In C++11, we wouldn't need to also have using directives for each value
kadonotakashi 0:8fdf9a60065b 211 using SerialBase::Disabled;
kadonotakashi 0:8fdf9a60065b 212 using SerialBase::RTS;
kadonotakashi 0:8fdf9a60065b 213 using SerialBase::CTS;
kadonotakashi 0:8fdf9a60065b 214 using SerialBase::RTSCTS;
kadonotakashi 0:8fdf9a60065b 215
kadonotakashi 0:8fdf9a60065b 216 /** Set the flow control type on the serial port
kadonotakashi 0:8fdf9a60065b 217 *
kadonotakashi 0:8fdf9a60065b 218 * @param type the flow control type (Disabled, RTS, CTS, RTSCTS)
kadonotakashi 0:8fdf9a60065b 219 * @param flow1 the first flow control pin (RTS for RTS or RTSCTS, CTS for CTS)
kadonotakashi 0:8fdf9a60065b 220 * @param flow2 the second flow control pin (CTS for RTSCTS)
kadonotakashi 0:8fdf9a60065b 221 */
kadonotakashi 0:8fdf9a60065b 222 void set_flow_control(Flow type, PinName flow1 = NC, PinName flow2 = NC);
kadonotakashi 0:8fdf9a60065b 223 #endif
kadonotakashi 0:8fdf9a60065b 224
kadonotakashi 0:8fdf9a60065b 225 private:
kadonotakashi 0:8fdf9a60065b 226
kadonotakashi 0:8fdf9a60065b 227 void wait_ms(uint32_t millisec);
kadonotakashi 0:8fdf9a60065b 228
kadonotakashi 0:8fdf9a60065b 229 /** SerialBase lock override */
kadonotakashi 0:8fdf9a60065b 230 virtual void lock(void);
kadonotakashi 0:8fdf9a60065b 231
kadonotakashi 0:8fdf9a60065b 232 /** SerialBase unlock override */
kadonotakashi 0:8fdf9a60065b 233 virtual void unlock(void);
kadonotakashi 0:8fdf9a60065b 234
kadonotakashi 0:8fdf9a60065b 235 /** Acquire mutex */
kadonotakashi 0:8fdf9a60065b 236 virtual void api_lock(void);
kadonotakashi 0:8fdf9a60065b 237
kadonotakashi 0:8fdf9a60065b 238 /** Release mutex */
kadonotakashi 0:8fdf9a60065b 239 virtual void api_unlock(void);
kadonotakashi 0:8fdf9a60065b 240
kadonotakashi 0:8fdf9a60065b 241 /** Software serial buffers
kadonotakashi 0:8fdf9a60065b 242 * By default buffer size is 256 for TX and 256 for RX. Configurable through mbed_app.json
kadonotakashi 0:8fdf9a60065b 243 */
kadonotakashi 0:8fdf9a60065b 244 CircularBuffer<char, MBED_CONF_DRIVERS_UART_SERIAL_RXBUF_SIZE> _rxbuf;
kadonotakashi 0:8fdf9a60065b 245 CircularBuffer<char, MBED_CONF_DRIVERS_UART_SERIAL_TXBUF_SIZE> _txbuf;
kadonotakashi 0:8fdf9a60065b 246
kadonotakashi 0:8fdf9a60065b 247 PlatformMutex _mutex;
kadonotakashi 0:8fdf9a60065b 248
kadonotakashi 0:8fdf9a60065b 249 Callback<void()> _sigio_cb;
kadonotakashi 0:8fdf9a60065b 250
kadonotakashi 0:8fdf9a60065b 251 bool _blocking;
kadonotakashi 0:8fdf9a60065b 252 bool _tx_irq_enabled;
kadonotakashi 0:8fdf9a60065b 253 bool _rx_irq_enabled;
kadonotakashi 0:8fdf9a60065b 254 InterruptIn *_dcd_irq;
kadonotakashi 0:8fdf9a60065b 255
kadonotakashi 0:8fdf9a60065b 256 /** Device Hanged up
kadonotakashi 0:8fdf9a60065b 257 * Determines if the device hanged up on us.
kadonotakashi 0:8fdf9a60065b 258 *
kadonotakashi 0:8fdf9a60065b 259 * @return True, if hanged up
kadonotakashi 0:8fdf9a60065b 260 */
kadonotakashi 0:8fdf9a60065b 261 bool hup() const;
kadonotakashi 0:8fdf9a60065b 262
kadonotakashi 0:8fdf9a60065b 263 /** ISRs for serial
kadonotakashi 0:8fdf9a60065b 264 * Routines to handle interrupts on serial pins.
kadonotakashi 0:8fdf9a60065b 265 * Copies data into Circular Buffer.
kadonotakashi 0:8fdf9a60065b 266 * Reports the state change to File handle.
kadonotakashi 0:8fdf9a60065b 267 */
kadonotakashi 0:8fdf9a60065b 268 void tx_irq(void);
kadonotakashi 0:8fdf9a60065b 269 void rx_irq(void);
kadonotakashi 0:8fdf9a60065b 270
kadonotakashi 0:8fdf9a60065b 271 void wake(void);
kadonotakashi 0:8fdf9a60065b 272
kadonotakashi 0:8fdf9a60065b 273 void dcd_irq(void);
kadonotakashi 0:8fdf9a60065b 274
kadonotakashi 0:8fdf9a60065b 275 };
kadonotakashi 0:8fdf9a60065b 276 } //namespace mbed
kadonotakashi 0:8fdf9a60065b 277
kadonotakashi 0:8fdf9a60065b 278 #endif //(DEVICE_SERIAL && DEVICE_INTERRUPTIN) || defined(DOXYGEN_ONLY)
kadonotakashi 0:8fdf9a60065b 279 #endif //MBED_UARTSERIAL_H