takashi kadono
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
mbed-os/targets/targets.json
- Committer:
- kadonotakashi
- Date:
- 2018-10-11
- Revision:
- 3:f3764f852aa8
- Parent:
- 0:8fdf9a60065b
File content as of revision 3:f3764f852aa8:
{
"Target": {
"core": null,
"default_toolchain": "ARM",
"supported_toolchains": null,
"extra_labels": [],
"is_disk_virtual": false,
"macros": [],
"device_has": [],
"features": [],
"detect_code": [],
"public": false,
"default_lib": "std",
"bootloader_supported": false,
"config": {
"console-uart-flow-control": {
"help": "Console hardware flow control. Options: null, RTS, CTS, RTSCTS.",
"value": null
},
"network-default-interface-type": {
"help": "Default network interface type. Typical options: null, ETHERNET, WIFI, CELLULAR, MESH",
"value": null
},
"boot-stack-size": {
"help": "Define the boot stack size in bytes. This value must be a multiple of 8",
"value": "0x1000"
}
}
},
"CM4_UARM": {
"inherits": ["Target"],
"core": "Cortex-M4",
"default_toolchain": "uARM",
"public": false,
"supported_toolchains": ["uARM"],
"default_lib": "small"
},
"CM4_ARM": {
"inherits": ["Target"],
"core": "Cortex-M4",
"public": false,
"supported_toolchains": ["ARM"]
},
"CM4F_UARM": {
"inherits": ["Target"],
"core": "Cortex-M4F",
"default_toolchain": "uARM",
"public": false,
"supported_toolchains": ["uARM"],
"default_lib": "small"
},
"CM4F_ARM": {
"inherits": ["Target"],
"core": "Cortex-M4F",
"public": false,
"supported_toolchains": ["ARM"]
},
"LPCTarget": {
"inherits": ["Target"],
"post_binary_hook": {"function": "LPCTargetCode.lpc_patch"},
"public": false
},
"LPC11C24": {
"inherits": ["LPCTarget"],
"core": "Cortex-M0",
"extra_labels": ["NXP", "LPC11XX_11CXX", "LPC11CXX"],
"OUTPUT_EXT": "hex",
"macros": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
"device_has": ["ANALOGIN", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"device_name": "LPC11C24FBD48/301"
},
"LPC1114": {
"inherits": ["LPCTarget"],
"core": "Cortex-M0",
"default_toolchain": "uARM",
"extra_labels": ["NXP", "LPC11XX_11CXX", "LPC11XX"],
"macros": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "LPC1114FN28/102"
},
"LPC11U24": {
"inherits": ["LPCTarget"],
"core": "Cortex-M0",
"default_toolchain": "uARM",
"extra_labels": ["NXP", "LPC11UXX", "LPC11U24_401"],
"macros": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
"detect_code": ["1040"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "LPC11U24FBD48/401"
},
"OC_MBUINO": {
"inherits": ["LPC11U24"],
"macros": ["TARGET_LPC11U24", "CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"extra_labels": ["NXP", "LPC11UXX"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"release_versions": ["2"]
},
"LPC11U24_301": {
"inherits": ["LPCTarget"],
"core": "Cortex-M0",
"extra_labels": ["NXP", "LPC11UXX"],
"macros": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"device_name": "LPC11U24FHI33/301"
},
"LPC11U34_421": {
"inherits": ["LPCTarget"],
"core": "Cortex-M0",
"default_toolchain": "uARM",
"extra_labels": ["NXP", "LPC11UXX"],
"macros": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
"default_lib": "small",
"device_name": "LPC11U34FBD48/311"
},
"MICRONFCBOARD": {
"inherits": ["LPC11U34_421"],
"macros_add": ["LPC11U34_421", "APPNEARME_MICRONFCBOARD"],
"extra_labels_add": ["APPNEARME_MICRONFCBOARD"],
"release_versions": ["2"],
"device_name": "LPC11U34FBD48/311"
},
"LPC11U35_401": {
"inherits": ["LPCTarget"],
"core": "Cortex-M0",
"default_toolchain": "uARM",
"extra_labels": ["NXP", "LPC11UXX"],
"macros": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "LPC11U35FBD48/401"
},
"LPC11U35_501": {
"inherits": ["LPCTarget"],
"core": "Cortex-M0",
"default_toolchain": "uARM",
"extra_labels": ["NXP", "LPC11UXX", "MCU_LPC11U35_501"],
"macros": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "LPC11U35FHI33/501"
},
"LPC11U35_501_IBDAP": {
"inherits": ["LPCTarget"],
"core": "Cortex-M0",
"default_toolchain": "uARM",
"extra_labels": ["NXP", "LPC11UXX", "MCU_LPC11U35_501"],
"macros": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
"default_lib": "small",
"device_name": "LPC11U35FHI33/501"
},
"XADOW_M0": {
"inherits": ["LPC11U35_501"]
},
"LPC11U35_Y5_MBUG": {
"inherits": ["LPCTarget"],
"core": "Cortex-M0",
"default_toolchain": "uARM",
"extra_labels": ["NXP", "LPC11UXX", "MCU_LPC11U35_501"],
"macros": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
"default_lib": "small",
"device_name": "LPC11U35FHI33/501"
},
"LPC11U37_501": {
"inherits": ["LPCTarget"],
"core": "Cortex-M0",
"default_toolchain": "uARM",
"extra_labels": ["NXP", "LPC11UXX"],
"macros": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
"default_lib": "small",
"device_name": "LPC11U37FBD64/501"
},
"LPCCAPPUCCINO": {
"inherits": ["LPC11U37_501"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
"device_name": "LPC11U37FBD64/501"
},
"ARCH_GPRS": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M0",
"default_toolchain": "uARM",
"extra_labels": ["NXP", "LPC11UXX", "LPC11U37_501"],
"macros": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
"inherits": ["LPCTarget"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "LPC11U37FBD64/501"
},
"LPC11U68": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M0+",
"default_toolchain": "uARM",
"extra_labels": ["NXP", "LPC11U6X"],
"supported_toolchains": ["ARM", "uARM", "GCC_CR", "GCC_ARM", "IAR"],
"inherits": ["LPCTarget"],
"detect_code": ["1168"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "SERIAL", "SLEEP", "SPI"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "LPC11U68JBD100"
},
"LPC1347": {
"inherits": ["LPCTarget"],
"core": "Cortex-M3",
"extra_labels": ["NXP", "LPC13XX"],
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"release_versions": ["2"],
"device_name": "LPC1347FBD48"
},
"LPC1549": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M3",
"default_toolchain": "uARM",
"extra_labels": ["NXP", "LPC15XX"],
"supported_toolchains": ["uARM", "GCC_CR", "GCC_ARM", "IAR"],
"inherits": ["LPCTarget"],
"detect_code": ["1549"],
"device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "INTERRUPTIN", "PWMOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "LPC1549JBD64"
},
"LPC1768": {
"inherits": ["LPCTarget"],
"core": "Cortex-M3",
"extra_labels": ["NXP", "LPC176X", "MBED_LPC1768", "NXP_EMAC"],
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
"detect_code": ["1010"],
"device_has": ["RTC", "USTICKER", "ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "EMAC", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "LPC1768",
"bootloader_supported": true,
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"LPC1769": {
"inherits": ["LPC1768"],
"device_name": "LPC1769"
},
"ARCH_PRO": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M3",
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
"extra_labels": ["NXP", "LPC176X", "NXP_EMAC"],
"macros": ["TARGET_LPC1768"],
"inherits": ["LPCTarget"],
"device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "EMAC", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "LPC1768",
"bootloader_supported": true,
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"UBLOX_C027": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M3",
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
"extra_labels": ["NXP", "LPC176X", "NXP_EMAC"],
"config": {
"modem_is_on_board": {
"help": "Value: Tells the build system that the modem is on-board as oppose to a plug-in shield/module.",
"value": 1,
"macro_name": "MODEM_ON_BOARD"
},
"modem_data_connection_type": {
"help": "Value: Defines how the modem is wired up to the MCU, e.g., data connection can be a UART or USB and so forth.",
"value": 1,
"macro_name": "MODEM_ON_BOARD_UART"
}
},
"macros": ["TARGET_LPC1768"],
"inherits": ["LPCTarget"],
"device_has": ["USTICKER", "ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "EMAC", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "LPC1768",
"bootloader_supported": true,
"overrides": {
"network-default-interface-type": "CELLULAR"
}
},
"XBED_LPC1768": {
"inherits": ["LPCTarget"],
"core": "Cortex-M3",
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
"extra_labels": ["NXP", "LPC176X", "XBED_LPC1768"],
"macros": ["TARGET_LPC1768"],
"detect_code": ["1010"],
"device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES", "FLASH"],
"device_name": "LPC1768"
},
"LPC810": {
"inherits": ["LPCTarget"],
"core": "Cortex-M0+",
"default_toolchain": "uARM",
"extra_labels": ["NXP", "LPC81X"],
"is_disk_virtual": true,
"supported_toolchains": ["uARM", "IAR", "GCC_ARM"],
"device_has": ["I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE"],
"default_lib": "small",
"device_name": "LPC810M021FN8"
},
"LPC812": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M0+",
"default_toolchain": "uARM",
"extra_labels": ["NXP", "LPC81X"],
"is_disk_virtual": true,
"supported_toolchains": ["uARM", "IAR", "GCC_ARM"],
"inherits": ["LPCTarget"],
"detect_code": ["1050"],
"device_has": ["I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "LPC812M101JDH20"
},
"LPC824": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M0+",
"default_toolchain": "uARM",
"extra_labels": ["NXP", "LPC82X"],
"is_disk_virtual": true,
"supported_toolchains": ["uARM", "GCC_ARM", "GCC_CR", "IAR"],
"inherits": ["LPCTarget"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "LPC824M201JDH20"
},
"SSCI824": {
"inherits": ["LPCTarget"],
"core": "Cortex-M0+",
"default_toolchain": "uARM",
"extra_labels": ["NXP", "LPC82X"],
"is_disk_virtual": true,
"supported_toolchains": ["uARM", "GCC_ARM"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
"default_lib": "small",
"release_versions": ["2"]
},
"MCU_LPC4088": {
"inherits": ["LPCTarget"],
"core": "Cortex-M4F",
"extra_labels": ["NXP", "LPC408X", "NXP_EMAC"],
"is_disk_virtual": true,
"supported_toolchains": ["ARM", "GCC_CR", "GCC_ARM", "IAR"],
"post_binary_hook": {
"function": "LPC4088Code.binary_hook"
},
"device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "EMAC", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"device_name": "LPC4088FBD144",
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"LPC4088": {
"inherits": ["MCU_LPC4088"],
"release_versions": ["2", "5"]
},
"LPC4088_DM": {
"inherits": ["MCU_LPC4088"],
"release_versions": ["2", "5"]
},
"LPC4330_M4": {
"inherits": ["LPCTarget"],
"core": "Cortex-M4F",
"extra_labels": ["NXP", "LPC43XX", "LPC4330"],
"supported_toolchains": ["ARM", "GCC_CR", "IAR", "GCC_ARM"],
"device_has": ["ANALOGIN", "ANALOGOUT", "DEBUG_AWARENESS", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"device_name": "LPC4330"
},
"LPC4330_M0": {
"inherits": ["LPCTarget"],
"core": "Cortex-M0",
"extra_labels": ["NXP", "LPC43XX", "LPC4330"],
"supported_toolchains": ["ARM", "GCC_CR", "IAR"],
"device_has": ["ANALOGIN", "ANALOGOUT", "DEBUG_AWARENESS", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
},
"LPC4337": {
"inherits": ["LPCTarget"],
"core": "Cortex-M4F",
"extra_labels": ["NXP", "LPC43XX", "LPC4337"],
"supported_toolchains": ["ARM"],
"device_has": ["ANALOGIN", "ANALOGOUT", "DEBUG_AWARENESS", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"release_versions": ["2"],
"device_name": "LPC4337"
},
"LPC1800": {
"inherits": ["LPCTarget"],
"core": "Cortex-M3",
"extra_labels": ["NXP", "LPC43XX"],
"public": false,
"supported_toolchains": ["ARM", "GCC_CR", "IAR"]
},
"LPC11U37H_401": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M0",
"default_toolchain": "uARM",
"extra_labels": ["NXP", "LPC11UXX"],
"macros": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR"],
"inherits": ["LPCTarget"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "LPC11U37HFBD64/401"
},
"ELEKTOR_COCORICO": {
"core": "Cortex-M0+",
"default_toolchain": "uARM",
"extra_labels": ["NXP", "LPC81X"],
"supported_toolchains": ["uARM", "GCC_ARM", "IAR"],
"inherits": ["LPCTarget"],
"is_disk_virtual": true,
"detect_code": ["C000"],
"default_lib": "small",
"device_name": "LPC812M101JDH16"
},
"KL05Z": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M0+",
"default_toolchain": "uARM",
"extra_labels": ["Freescale", "KLXX"],
"is_disk_virtual": true,
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
"inherits": ["Target"],
"device_has": ["USTICKER", "ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "MKL05Z32xxx4"
},
"KL25Z": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M0+",
"extra_labels": ["Freescale", "KLXX"],
"is_disk_virtual": true,
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"inherits": ["Target"],
"detect_code": ["0200"],
"device_has": ["USTICKER", "ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"release_versions": ["2", "5"],
"device_name": "MKL25Z128xxx4"
},
"KL26Z": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M0+",
"extra_labels": ["Freescale", "KLXX"],
"is_disk_virtual": true,
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"inherits": ["Target"],
"device_has": ["USTICKER", "ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"device_name": "MKL26Z128xxx4"
},
"KL46Z": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M0+",
"extra_labels": ["Freescale", "KLXX", "FLASH_CMSIS_ALGO"],
"is_disk_virtual": true,
"supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
"inherits": ["Target"],
"detect_code": ["0220"],
"device_has": ["USTICKER", "ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "MKL46Z256xxx4",
"bootloader_supported": true
},
"K20D50M": {
"inherits": ["Target"],
"core": "Cortex-M4",
"extra_labels": ["Freescale", "K20XX"],
"is_disk_virtual": true,
"supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
"detect_code": ["0230"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"release_versions": ["2"],
"device_name": "MK20DX128xxx5"
},
"TEENSY3_1": {
"inherits": ["Target"],
"core": "Cortex-M4",
"extra_labels": ["Freescale", "K20XX", "K20DX256"],
"OUTPUT_EXT": "hex",
"is_disk_virtual": true,
"supported_toolchains": ["GCC_ARM", "ARM"],
"post_binary_hook": {
"function": "TEENSY3_1Code.binary_hook",
"toolchains": ["ARM_STD", "ARM_MICRO", "GCC_ARM"]
},
"detect_code": ["0230"],
"device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"release_versions": ["2"],
"device_name": "MK20DX256xxx7"
},
"MCU_K22F512": {
"core": "Cortex-M4F",
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"extra_labels": ["Freescale", "MCUXpresso_MCUS", "KSDK2_MCUS", "MCU_K22F", "MCU_K22F512", "FRDM", "KPSDK_MCUS", "KPSDK_CODE"],
"is_disk_virtual": true,
"public": false,
"macros": ["CPU_MK22FN512VLH12", "FSL_RTOS_MBED"],
"inherits": ["Target"],
"detect_code": ["0231"],
"device_has": ["USTICKER", "LPTICKER", "RTC", "ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES", "TRNG"],
"device_name": "MK22DN512xxx5"
},
"K22F": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_K22F512"],
"release_versions": ["2", "5"],
"extra_labels_add": ["FRDM"]
},
"KL27Z": {
"inherits": ["Target"],
"core": "Cortex-M0+",
"extra_labels": ["Freescale", "MCUXpresso_MCUS", "KSDK2_MCUS", "FRDM"],
"macros": ["CPU_MKL27Z64VLH4", "FSL_RTOS_MBED"],
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"supported_form_factors": ["ARDUINO"],
"is_disk_virtual": true,
"default_toolchain": "ARM",
"detect_code": ["0261"],
"device_has": ["USTICKER", "LPTICKER", "RTC", "ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"default_lib": "std",
"release_versions": ["2"],
"device_name": "MKL27Z64xxx4"
},
"KL43Z": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M0+",
"supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
"extra_labels": ["Freescale", "MCUXpresso_MCUS", "KSDK2_MCUS", "FRDM"],
"macros": ["CPU_MKL43Z256VLH4", "FSL_RTOS_MBED"],
"is_disk_virtual": true,
"inherits": ["Target"],
"detect_code": ["0262"],
"device_has": ["USTICKER", "LPTICKER", "RTC", "ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"release_versions": ["2", "5"],
"device_name": "MKL43Z256xxx4"
},
"KL82Z": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M0+",
"supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
"extra_labels": ["Freescale", "MCUXpresso_MCUS", "KSDK2_MCUS", "FRDM"],
"macros": ["CPU_MKL82Z128VLK7", "FSL_RTOS_MBED"],
"is_disk_virtual": true,
"inherits": ["Target"],
"detect_code": ["0218"],
"device_has": ["USTICKER", "LPTICKER", "RTC", "ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES", "TRNG"],
"release_versions": ["2", "5"],
"device_name": "MKL82Z128xxx7"
},
"USENSE": {
"inherits": ["KL82Z"],
"extra_labels_remove": ["FRDM"],
"supported_form_factors": []
},
"KW24D": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M4",
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"extra_labels": ["Freescale", "MCUXpresso_MCUS", "KSDK2_MCUS", "FRDM"],
"is_disk_virtual": true,
"macros": ["CPU_MKW24D512VHA5", "FSL_RTOS_MBED"],
"inherits": ["Target"],
"detect_code": ["0250"],
"device_has": ["USTICKER", "LPTICKER", "RTC", "ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES", "TRNG", "FLASH", "802_15_4_PHY"],
"release_versions": ["2", "5"],
"device_name": "MKW24D512xxx5",
"bootloader_supported": true,
"overrides": {
"network-default-interface-type": "MESH"
}
},
"KW41Z": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M0+",
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"extra_labels": ["Freescale", "MCUXpresso_MCUS", "KSDK2_MCUS", "FRDM"],
"is_disk_virtual": true,
"macros": ["CPU_MKW41Z512VHT4", "FSL_RTOS_MBED"],
"inherits": ["Target"],
"detect_code": ["0201"],
"device_has": ["USTICKER", "LPTICKER", "RTC", "ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "TRNG", "STDIO_MESSAGES"],
"release_versions": ["2", "5"],
"device_name": "MKW41Z512xxx4"
},
"MCU_K24F1M": {
"core": "Cortex-M4F",
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"extra_labels": ["Freescale", "MCUXpresso_MCUS", "KSDK2_MCUS", "MCU_K24F", "KPSDK_MCUS", "KPSDK_CODE"],
"is_disk_virtual": true,
"public": false,
"macros": ["CPU_MK24FN1M0VDC12", "FSL_RTOS_MBED"],
"inherits": ["Target"],
"device_has": ["USTICKER", "LPTICKER", "RTC", "ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_FC", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE", "STDIO_MESSAGES", "TRNG", "FLASH"],
"device_name": "MK24FN1M0xxx12"
},
"RO359B": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_K24F1M"],
"detect_code": ["1022"],
"release_versions": ["2", "5"]
},
"K64F": {
"supported_form_factors": ["ARDUINO"],
"components": ["SD"],
"core": "Cortex-M4F",
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"extra_labels": ["Freescale", "MCUXpresso_MCUS", "KSDK2_MCUS", "FRDM", "KPSDK_MCUS", "KPSDK_CODE", "MCU_K64F", "Freescale_EMAC"],
"is_disk_virtual": true,
"macros": ["CPU_MK64FN1M0VMD12", "FSL_RTOS_MBED"],
"inherits": ["Target"],
"detect_code": ["0240"],
"device_has": ["USTICKER", "LPTICKER", "RTC", "CRC", "ANALOGIN", "ANALOGOUT", "EMAC", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_FC", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE", "STDIO_MESSAGES", "STORAGE", "TRNG", "FLASH"],
"features": ["STORAGE"],
"release_versions": ["2", "5"],
"device_name": "MK64FN1M0xxx12",
"bootloader_supported": true,
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"SDT64B": {
"inherits": ["K64F"],
"extra_labels_add": ["K64F"],
"extra_labels_remove": ["FRDM"],
"components_remove": ["SD"],
"supported_form_factors": [],
"detect_code": ["3105"]
},
"EV_COG_AD4050LZ": {
"inherits": ["Target"],
"core": "Cortex-M4F",
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"macros": ["__ADUCM4050__", "EV_COG_AD4050LZ"],
"extra_labels": ["Analog_Devices", "ADUCM4X50", "ADUCM4050", "EV_COG_AD4050LZ", "FLASH_CMSIS_ALGO"],
"device_has": ["FLASH", "USTICKER", "RTC", "SERIAL", "STDIO_MESSAGES", "TRNG", "SLEEP", "INTERRUPTIN", "SPI", "I2C", "ANALOGIN"],
"device_name": "ADuCM4050",
"detect_code": ["0603"],
"release_versions": ["5"],
"bootloader_supported": true
},
"EV_COG_AD3029LZ": {
"inherits": ["Target"],
"core": "Cortex-M3",
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"macros": ["__ADUCM3029__", "EV_COG_AD3029LZ"],
"extra_labels": ["Analog_Devices", "ADUCM302X", "ADUCM3029", "EV_COG_AD3029LZ", "FLASH_CMSIS_ALGO"],
"device_has": ["FLASH", "USTICKER", "RTC", "SERIAL", "STDIO_MESSAGES", "TRNG", "SLEEP", "INTERRUPTIN", "SPI", "I2C", "ANALOGIN"],
"device_name": "ADuCM3029",
"detect_code": ["0602"],
"release_versions": ["5"],
"bootloader_supported": true
},
"MTS_GAMBIT": {
"inherits": ["Target"],
"core": "Cortex-M4F",
"supported_toolchains": ["ARM", "GCC_ARM"],
"extra_labels": ["Freescale", "MCUXpresso_MCUS", "KSDK2_MCUS", "KPSDK_MCUS", "KPSDK_CODE", "MCU_K64F"],
"is_disk_virtual": true,
"macros": ["CPU_MK64FN1M0VMD12", "FSL_RTOS_MBED", "TARGET_K64F"],
"device_has": ["USTICKER", "LPTICKER", "RTC", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE", "STDIO_MESSAGES", "FLASH"],
"device_name": "MK64FN1M0xxx12"
},
"HEXIWEAR": {
"inherits": ["Target"],
"core": "Cortex-M4F",
"extra_labels": ["Freescale", "MCUXpresso_MCUS", "KSDK2_MCUS", "MCU_K64F"],
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"macros": ["CPU_MK64FN1M0VMD12", "FSL_RTOS_MBED", "TARGET_K64F"],
"is_disk_virtual": true,
"default_toolchain": "ARM",
"detect_code": ["0214"],
"device_has": ["USTICKER", "LPTICKER", "RTC", "ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE", "STDIO_MESSAGES", "TRNG", "FLASH"],
"default_lib": "std",
"release_versions": ["2", "5"],
"device_name": "MK64FN1M0xxx12",
"bootloader_supported": true
},
"K66F": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M4F",
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"extra_labels": ["Freescale", "MCUXpresso_MCUS", "KSDK2_MCUS", "FRDM", "Freescale_EMAC"],
"is_disk_virtual": true,
"macros": ["CPU_MK66FN2M0VMD18", "FSL_RTOS_MBED"],
"inherits": ["Target"],
"detect_code": ["0311"],
"device_has": ["USTICKER", "LPTICKER", "RTC", "ANALOGIN", "ANALOGOUT", "EMAC", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "MK66FN2M0xxx18",
"bootloader_supported": true,
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"K82F": {
"supported_form_factors": ["ARDUINO"],
"components": ["SPIF"],
"core": "Cortex-M4F",
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"extra_labels": ["Freescale", "MCUXpresso_MCUS", "KSDK2_MCUS", "FRDM"],
"is_disk_virtual": true,
"macros": ["CPU_MK82FN256VDC15", "FSL_RTOS_MBED"],
"inherits": ["Target"],
"detect_code": ["0217"],
"device_has": ["USTICKER", "LPTICKER", "RTC", "ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "MK82FN256xxx15"
},
"UBRIDGE": {
"inherits": ["K82F"],
"extra_labels_remove": ["FRDM"],
"components_remove": ["SPIF"],
"supported_form_factors": []
},
"FAMILY_STM32": {
"inherits": ["Target"],
"public": false,
"extra_labels": ["STM"],
"supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
"macros": ["TRANSACTION_QUEUE_SIZE_SPI=2"],
"config": {
"lse_available": {
"help": "Define if a Low Speed External xtal (LSE) is available on the board (0 = No, 1 = Yes). If Yes, the LSE will be used to clock the RTC, LPUART, ... otherwise the Low Speed Internal clock (LSI) will be used",
"value": "1"
},
"lpuart_clock_source": {
"help": "Define the LPUART clock source. Mask values: USE_LPUART_CLK_LSE, USE_LPUART_CLK_PCLK1, USE_LPUART_CLK_HSI",
"value": "USE_LPUART_CLK_LSE|USE_LPUART_CLK_PCLK1"
},
"stdio_uart_tx": {
"help": "default TX STDIO pins is defined in PinNames.h file, but it can be overridden"
},
"stdio_uart_rx": {
"help": "default RX STDIO pins is defined in PinNames.h file, but it can be overridden"
},
"lpticker_delay_ticks": {
"help": "https://os.mbed.com/docs/latest/porting/low-power-ticker.html",
"value": 1,
"macro_name": "LPTICKER_DELAY_TICKS"
}
},
"device_has": ["USTICKER", "LPTICKER", "RTC", "ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"]
},
"MIMXRT1050_EVK": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M7FD",
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"extra_labels": ["NXP", "MCUXpresso_MCUS", "EVK", "MIMXRT1050", "IMX"],
"is_disk_virtual": true,
"macros": ["CPU_MIMXRT1052DVL6B", "FSL_RTOS_MBED", "XIP_BOOT_HEADER_ENABLE=1", "XIP_EXTERNAL_FLASH=1", "XIP_BOOT_HEADER_DCD_ENABLE=1", "SKIP_SYSCLK_INIT"],
"inherits": ["Target"],
"detect_code": ["0227"],
"device_has": ["RTC", "SLEEP", "USTICKER", "LPTICKER", "ANALOGIN", "I2C", "I2CSLAVE", "ERROR_RED", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"release_versions": ["2", "5"],
"device_name": "MIMXRT1052"
},
"LPC54114": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M4F",
"supported_toolchains": ["ARM", "IAR", "GCC_ARM"],
"extra_labels": ["NXP", "MCUXpresso_MCUS", "LPC54114_M4", "LPCXpresso", "LPC"],
"is_disk_virtual": true,
"macros": ["CPU_LPC54114J256BD64_cm4", "FSL_RTOS_MBED"],
"inherits": ["Target"],
"detect_code": ["1054"],
"device_has": ["USTICKER", "RTC", "ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES", "FLASH"],
"release_versions": ["2", "5"],
"device_name" : "LPC54114J256BD64"
},
"MCU_LPC546XX": {
"core": "Cortex-M4F",
"supported_toolchains": ["ARM", "IAR", "GCC_ARM"],
"extra_labels": ["NXP", "MCUXpresso_MCUS", "LPCXpresso", "LPC", "LPC546XX", "NXP_EMAC"],
"is_disk_virtual": true,
"macros": ["CPU_LPC54628J512ET180", "FSL_RTOS_MBED"],
"inherits": ["Target"],
"device_has": ["USTICKER", "RTC", "ANALOGIN", "EMAC", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES", "FLASH", "TRNG"],
"device_name" : "LPC54628J512ET180",
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"LPC546XX": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_LPC546XX"],
"detect_code": ["1056"],
"release_versions": ["2", "5"]
},
"FF_LPC546XX": {
"inherits": ["MCU_LPC546XX"],
"extra_labels_remove" : ["LPCXpresso"],
"detect_code": ["8081"],
"release_versions": ["2", "5"]
},
"NUCLEO_F030R8": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M0",
"extra_labels_add": ["STM32F0", "STM32F030R8"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"detect_code": ["0725"],
"macros_add": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"device_has_add": ["CRC", "SERIAL_FC"],
"device_has_remove": ["LPTICKER"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "STM32F030R8"
},
"NUCLEO_F031K6": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M0",
"default_toolchain": "uARM",
"extra_labels_add": ["STM32F0", "STM32F031K6"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"detect_code": ["0791"],
"overrides": {"lse_available": 0},
"macros_add": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"device_has_add": ["CRC", "SERIAL_FC"],
"device_has_remove": ["LPTICKER"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "STM32F031K6"
},
"NUCLEO_F042K6": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M0",
"default_toolchain": "uARM",
"extra_labels_add": ["STM32F0", "STM32F042K6"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"detect_code": ["0785"],
"overrides": {"lse_available": 0},
"macros_add": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"device_has_add": ["CAN", "CRC", "SERIAL_FC"],
"device_has_remove": ["LPTICKER"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "STM32F042K6"
},
"NUCLEO_F070RB": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M0",
"extra_labels_add": ["STM32F0", "STM32F070RB"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"detect_code": ["0755"],
"macros_add": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"device_has_add": ["CRC", "SERIAL_FC", "SERIAL_ASYNCH", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32F070RB"
},
"NUCLEO_F072RB": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M0",
"extra_labels_add": ["STM32F0", "STM32F072RB"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"detect_code": ["0730"],
"macros_add": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"device_has_add": ["ANALOGOUT", "CAN", "CRC", "SERIAL_FC", "SERIAL_ASYNCH", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32F072RB"
},
"NUCLEO_F091RC": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M0",
"extra_labels_add": ["STM32F0", "STM32F091RC"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"detect_code": ["0750"],
"macros_add": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"device_has_add": ["ANALOGOUT", "CAN", "CRC", "SERIAL_FC", "SERIAL_ASYNCH", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32F091RC"
},
"NUCLEO_F103RB": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M3",
"extra_labels_add": ["STM32F1", "STM32F103RB"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (SYSCLK=72 MHz) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI (SYSCLK=64 MHz)",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"clock_source_usb": {
"help": "In case of HSI clock source, to get 48 Mhz USB, SYSCLK has to be reduced from 64 to 48 MHz (set 0 for the max SYSCLK value)",
"value": "0",
"macro_name": "CLOCK_SOURCE_USB"
}
},
"detect_code": ["0700"],
"device_has_add": ["CAN", "SERIAL_FC", "SERIAL_ASYNCH", "FLASH"],
"device_has_remove": ["LPTICKER"],
"release_versions": ["2", "5"],
"device_name": "STM32F103RB"
},
"NUCLEO_F207ZG": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M3",
"extra_labels_add": ["STM32F2", "STM32F207ZG", "STM_EMAC"],
"config": {
"d11_configuration": {
"help": "Value: PA_7 for the default board configuration, PB_5 in case of solder bridge update (SB121 off/ SB122 on)",
"value": "PA_7",
"macro_name": "STM32_D11_SPI_ETHERNET_PIN"
},
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"detect_code": ["0835"],
"macros_add": ["USBHOST_OTHER"],
"device_has_add": ["ANALOGOUT", "CAN", "EMAC", "SERIAL_ASYNCH", "SERIAL_FC", "FLASH"],
"device_has_remove": ["LPTICKER"],
"release_versions": ["2", "5"],
"device_name": "STM32F207ZG",
"bootloader_supported": true,
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"NUCLEO_F302R8": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F3", "STM32F302x8", "STM32F302R8"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"detect_code": ["0705"],
"device_has_add": ["ANALOGOUT", "CAN", "CRC", "SERIAL_ASYNCH", "SERIAL_FC"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "STM32F302R8"
},
"NUCLEO_F303K8": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F3", "STM32F303x8", "STM32F303K8"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"overrides": {"lse_available": 0},
"detect_code": ["0775"],
"default_lib": "small",
"device_has_add": ["ANALOGOUT", "CAN", "CRC", "SERIAL_FC"],
"release_versions": ["2"],
"device_name": "STM32F303K8"
},
"NUCLEO_F303RE": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F3", "STM32F303xE", "STM32F303RE"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"detect_code": ["0745"],
"device_has_add": ["ANALOGOUT", "CAN", "CRC", "SERIAL_ASYNCH", "SERIAL_FC", "FLASH"],
"release_versions": ["2", "5"],
"bootloader_supported": true,
"device_name": "STM32F303RE"
},
"NUCLEO_F303ZE": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F3", "STM32F303xE", "STM32F303ZE"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"detect_code": ["0747"],
"device_has_add": ["ANALOGOUT", "CAN", "CRC", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32F303ZE"
},
"NUCLEO_F334R8": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F3", "STM32F334x8", "STM32F334R8"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"detect_code": ["0735"],
"device_has_add": ["ANALOGOUT", "CAN", "CRC", "SERIAL_ASYNCH", "SERIAL_FC"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "STM32F334R8"
},
"NUCLEO_F401RE": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F401xE", "STM32F401RE"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"detect_code": ["0720"],
"macros_add": ["USB_STM_HAL", "USBHOST_OTHER"],
"device_has_add": ["SERIAL_ASYNCH", "SERIAL_FC", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32F401RE"
},
"STEVAL_3DP001V1": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F401xE", "STM32F401VE"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL | USE_PLL_HSI",
"value": "USE_PLL_HSE_XTAL|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"macros_add": ["USB_STM_HAL", "USBHOST_OTHER", "HSE_VALUE=25000000"],
"device_has_add": ["SERIAL_ASYNCH", "SERIAL_FC", "FLASH"],
"overrides": {"lse_available": 0},
"release_versions": ["2", "5"],
"device_name": "STM32F401VE"
},
"NUCLEO_F410RB": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F410RB","STM32F410xB", "STM32F410Rx"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"detect_code": ["0744"],
"device_has_add": ["ANALOGOUT", "SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32F410RB"
},
"NUCLEO_F411RE": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F411xE", "STM32F411RE"],
"detect_code": ["0740"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"clock_source_usb": {
"help": "As 48 Mhz clock is configured for USB, SYSCLK has to be reduced from 100 to 96 MHz (set 0 for the max SYSCLK value)",
"value": "0",
"macro_name": "CLOCK_SOURCE_USB"
}
},
"macros_add": ["USB_STM_HAL", "USBHOST_OTHER"],
"device_has_add": ["SERIAL_ASYNCH", "SERIAL_FC", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32F411RE",
"bootloader_supported": true
},
"NUCLEO_F412ZG": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F412xG", "STM32F412ZG"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"detect_code": ["0826"],
"macros_add": ["USB_STM_HAL", "USBHOST_OTHER"],
"device_has_add": ["CAN", "SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32F412ZG",
"bootloader_supported": true
},
"MTB_MXCHIP_EMW3166": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F412xG", "STM32F412ZG", "WICED", "CYW43362"],
"macros_add": ["USB_STM_HAL", "USBHOST_OTHER"],
"device_has_add": ["CAN", "SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH"],
"release_versions": ["5"],
"device_name": "STM32F412ZG",
"bootloader_supported": true,
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"overrides": {
"network-default-interface-type": "WIFI"
}
},
"USI_WM_BN_BM_22": {
"inherits": ["FAMILY_STM32"],
"components": ["SPIF"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F412xG", "STM32F412ZG", "WICED", "CYW4343X", "CORDIO"],
"features": ["BLE", "STORAGE"],
"macros_add": ["USB_STM_HAL", "USBHOST_OTHER"],
"device_has_add": ["SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH"],
"release_versions": ["5"],
"device_name": "STM32F412ZG",
"bootloader_supported": true,
"public": false,
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"overrides": {
"network-default-interface-type": "WIFI"
}
},
"MTB_USI_WM_BN_BM_22": {
"overrides": {
"lse_available": 0
},
"inherits": ["USI_WM_BN_BM_22"]
},
"MTB_ADV_WISE_1530": {
"inherits": ["USI_WM_BN_BM_22"],
"config": {
"led1": "PA_4",
"led2": "PC_12",
"led3": "NC"
},
"overrides": {
"stdio_uart_tx": "PB_10",
"stdio_uart_rx": "PC_11"
}
},
"DISCO_F413ZH": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F413xx", "STM32F413ZH", "STM32F413xH"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"detect_code": ["0743"],
"macros_add": ["USB_STM_HAL", "USBHOST_OTHER"],
"device_has_add": ["ANALOGOUT", "CAN", "SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH", "QSPI"],
"release_versions": ["2", "5"],
"device_name": "STM32F413ZH"
},
"NUCLEO_F413ZH": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F413xx", "STM32F413ZH", "STM32F413xH"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"detect_code": ["0743"],
"macros_add": ["USB_STM_HAL", "USBHOST_OTHER"],
"device_has_add": ["ANALOGOUT", "CAN", "SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32F413ZH"
},
"ELMO_F411RE": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M4F",
"default_toolchain": "uARM",
"extra_labels_add": ["STM32F4", "STM32F411xE", "STM32F411RE"],
"supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
"detect_code": ["----"],
"device_has_add": [],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "STM32F411RE"
},
"NUCLEO_F429ZI": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M4F",
"config": {
"d11_configuration": {
"help": "Value: PA_7 for the default board configuration, PB_5 in case of solder bridge update (SB121 off/ SB122 on)",
"value": "PA_7",
"macro_name": "STM32_D11_SPI_ETHERNET_PIN"
},
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"clock_source_usb": {
"help": "As 48 Mhz clock is configured for USB, SYSCLK has to be reduced from 180 to 168 MHz (set 0 for the max SYSCLK value)",
"value": "1",
"macro_name": "CLOCK_SOURCE_USB"
}
},
"extra_labels_add": ["STM32F4", "STM32F429", "STM32F429ZI", "STM32F429xx", "STM32F429xI", "STM_EMAC"],
"macros_add": ["USB_STM_HAL", "USBHOST_OTHER"],
"device_has_add": ["ANALOGOUT", "CAN", "EMAC", "SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH"],
"detect_code": ["0796"],
"release_versions": ["2", "5"],
"device_name": "STM32F429ZI",
"bootloader_supported": true,
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"NUCLEO_F439ZI": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M4F",
"config": {
"d11_configuration": {
"help": "Value: PA_7 for the default board configuration, PB_5 in case of solder bridge update (SB121 off/ SB122 on)",
"value": "PA_7",
"macro_name": "STM32_D11_SPI_ETHERNET_PIN"
},
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"clock_source_usb": {
"help": "As 48 Mhz clock is configured for USB, SYSCLK has to be reduced from 180 to 168 MHz (set 0 for the max SYSCLK value)",
"value": "1",
"macro_name": "CLOCK_SOURCE_USB"
}
},
"extra_labels_add": ["STM32F4", "STM32F439", "STM32F439ZI", "STM32F439xx", "STM32F439xI", "STM_EMAC"],
"macros_add": ["MBEDTLS_CONFIG_HW_SUPPORT", "USB_STM_HAL", "USBHOST_OTHER"],
"device_has_add": ["ANALOGOUT", "CAN", "EMAC", "SERIAL_FC", "TRNG", "FLASH"],
"detect_code": ["0797"],
"release_versions": ["2", "5"],
"device_name" : "STM32F439ZI",
"bootloader_supported": true,
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"NUCLEO_F446RE": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F446xE", "STM32F446RE"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"detect_code": ["0777"],
"macros_add": ["USB_STM_HAL", "USBHOST_OTHER"],
"device_has_add": ["ANALOGOUT", "CAN", "SERIAL_ASYNCH", "SERIAL_FC", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32F446RE",
"bootloader_supported": true
},
"NUCLEO_F446ZE": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F446xE", "STM32F446ZE"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"detect_code": ["0778"],
"macros_add": ["USB_STM_HAL", "USBHOST_OTHER"],
"device_has_add": ["ANALOGOUT", "CAN", "SERIAL_ASYNCH", "SERIAL_FC", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32F446ZE"
},
"B96B_F446VE": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F446xE", "STM32F446VE"],
"detect_code": ["0840"],
"device_has_add": ["ANALOGOUT", "CAN", "SERIAL_ASYNCH", "SERIAL_FC", "FLASH"],
"release_versions": ["2", "5"],
"device_name":"STM32F446VE"
},
"NUCLEO_F746ZG": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M7F",
"extra_labels_add": ["STM32F7", "STM32F746", "STM32F746xG", "STM32F746ZG", "STM_EMAC"],
"config": {
"d11_configuration": {
"help": "Value: PA_7 for the default board configuration, PB_5 in case of solder bridge update (SB121 off/ SB122 on)",
"value": "PA_7",
"macro_name": "STM32_D11_SPI_ETHERNET_PIN"
},
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"macros_add": ["USBHOST_OTHER"],
"supported_form_factors": ["ARDUINO"],
"detect_code": ["0816"],
"device_has_add": ["ANALOGOUT", "CAN", "CRC", "EMAC", "SERIAL_ASYNCH", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32F746ZG",
"bootloader_supported": true,
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"NUCLEO_F756ZG": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M7F",
"extra_labels_add": ["STM32F7", "STM32F756", "STM32F756xG", "STM32F756ZG", "STM_EMAC"],
"config": {
"d11_configuration": {
"help": "Value: PA_7 for the default board configuration, PB_5 in case of solder bridge update (SB121 off/ SB122 on)",
"value": "PA_7",
"macro_name": "STM32_D11_SPI_ETHERNET_PIN"
},
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"macros_add": ["TRANSACTION_QUEUE_SIZE_SPI=2", "USBHOST_OTHER", "MBEDTLS_CONFIG_HW_SUPPORT"],
"supported_form_factors": ["ARDUINO"],
"detect_code": ["0819"],
"device_has_add": ["ANALOGOUT", "CAN", "CRC", "EMAC", "SERIAL_ASYNCH", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32F756ZG",
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"NUCLEO_F767ZI": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M7FD",
"extra_labels_add": ["STM32F7", "STM32F767", "STM32F767xI", "STM32F767ZI", "STM_EMAC"],
"config": {
"flash_dual_bank": {
"help": "Default board configuration is Single Bank Flash. If you enable Dual Bank with ST Link Utility, set value to 1",
"value": "0"
},
"d11_configuration": {
"help": "Value: PA_7 for the default board configuration, PB_5 in case of solder bridge update (SB121 off/ SB122 on)",
"value": "PA_7",
"macro_name": "STM32_D11_SPI_ETHERNET_PIN"
},
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"supported_form_factors": ["ARDUINO"],
"macros_add": ["USBHOST_OTHER"],
"detect_code": ["0818"],
"device_has_add": ["ANALOGOUT", "CAN", "CRC", "EMAC", "SERIAL_ASYNCH", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32F767ZI",
"bootloader_supported": true,
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"NUCLEO_L011K4": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M0+",
"extra_labels_add": ["STM32L0", "STM32L011K4"],
"supported_toolchains": ["uARM"],
"default_toolchain": "uARM",
"supported_form_factors": ["ARDUINO"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"overrides": {"lpticker_delay_ticks": 4},
"detect_code": ["0780"],
"device_has_add": ["CRC", "SERIAL_FC", "FLASH"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "STM32L011K4"
},
"NUCLEO_L031K6": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M0+",
"extra_labels_add": ["STM32L0", "STM32L031K6"],
"default_toolchain": "uARM",
"supported_form_factors": ["ARDUINO"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"overrides": {"lpticker_delay_ticks": 4},
"detect_code": ["0790"],
"device_has_add": ["CRC", "SERIAL_FC", "FLASH"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "STM32L031K6"
},
"NUCLEO_L053R8": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M0+",
"extra_labels_add": ["STM32L0", "STM32L053x8", "STM32L053R8"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"overrides": {"lpticker_delay_ticks": 4},
"detect_code": ["0715"],
"device_has_add": ["ANALOGOUT", "CRC", "SERIAL_FC", "SERIAL_ASYNCH", "FLASH"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "STM32L053R8"
},
"NUCLEO_L073RZ": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M0+",
"extra_labels_add": ["STM32L0", "STM32L073RZ", "STM32L073xx"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"overrides": {"lpticker_delay_ticks": 4},
"detect_code": ["0760"],
"device_has_add": ["ANALOGOUT", "CRC", "SERIAL_FC", "SERIAL_ASYNCH", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32L073RZ"
},
"NUCLEO_L152RE": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M3",
"extra_labels_add": ["STM32L1", "STM32L152RE"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"detect_code": ["0710"],
"device_has_add": ["ANALOGOUT", "SERIAL_ASYNCH", "SERIAL_FC", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32L152RE"
},
"NUCLEO_L432KC": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32L4", "STM32L432xC", "STM32L432KC"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"detect_code": ["0770"],
"device_has_add": ["ANALOGOUT", "CRC", "SERIAL_FC", "SERIAL_ASYNCH", "CAN", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32L432KC",
"bootloader_supported": true
},
"NUCLEO_L433RC_P": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32L4", "STM32L433xC", "STM32L433RC"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"detect_code": ["0779"],
"device_has_add": ["ANALOGOUT", "CRC", "SERIAL_FC", "SERIAL_ASYNCH", "CAN", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32L433RC",
"bootloader_supported": true
},
"MTB_ADV_WISE_1510": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32L4", "STM32L443xC", "STM32L443RC"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"overrides": {"lse_available": 0},
"release_versions": ["5"],
"device_has_add": ["ANALOGOUT", "CRC", "SERIAL_FC", "SERIAL_ASYNCH", "CAN", "TRNG", "FLASH"],
"device_has_remove": ["LPTICKER"],
"macros_add": ["MBEDTLS_CONFIG_HW_SUPPORT"],
"device_name" : "STM32L443RC",
"detect_code": ["0458"],
"bootloader_supported": true
},
"NUCLEO_L476RG": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32L4", "STM32L476RG", "STM32L476xG"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"detect_code": ["0765"],
"macros_add": ["USBHOST_OTHER", "TWO_RAM_REGIONS"],
"device_has_add": ["ANALOGOUT", "CAN", "CRC", "SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32L476RG",
"bootloader_supported": true
},
"SILICA_SENSOR_NODE": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"default_toolchain": "GCC_ARM",
"extra_labels_add": ["STM32L4", "STM32L476xG", "STM32L476JG"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
}
},
"detect_code": ["0766"],
"macros_add": ["USBHOST_OTHER", "TWO_RAM_REGIONS"],
"device_has_add": ["ANALOGOUT", "CAN", "CRC", "SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH"],
"release_versions": ["5"],
"device_name": "STM32L476JG"
},
"NUCLEO_L486RG": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32L4", "STM32L486RG", "STM32L486xG"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"detect_code": ["0827"],
"macros_add": ["USBHOST_OTHER", "MBEDTLS_CONFIG_HW_SUPPORT", "TWO_RAM_REGIONS"],
"device_has_add": ["ANALOGOUT", "CAN", "CRC", "SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32L486RG"
},
"MTB_ADV_WISE_1570": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32L4", "STM32L486RG", "STM32L486xG", "WISE_1570"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_HSE_XTAL",
"macro_name": "CLOCK_SOURCE"
}
},
"overrides": {"lpuart_clock_source": "USE_LPUART_CLK_HSI"},
"detect_code": ["0460"],
"macros_add": ["MBEDTLS_CONFIG_HW_SUPPORT", "WISE_1570", "TWO_RAM_REGIONS"],
"device_has_add": ["ANALOGOUT", "CRC", "SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH"],
"device_has_remove": ["LPTICKER"],
"release_versions": ["5"],
"device_name": "STM32L486RG",
"bootloader_supported": true,
"OUTPUT_EXT": "hex"
},
"ARCH_MAX": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M4F",
"supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
"program_cycle_s": 2,
"extra_labels_add": ["STM32F4", "STM32F407", "STM32F407xG", "STM32F407VG"],
"device_has_add": ["ANALOGOUT"],
"release_versions": ["2"],
"device_name": "STM32F407VG"
},
"WIO_3G": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL | USE_PLL_HSI",
"value": "USE_PLL_HSE_XTAL|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"clock_source_usb": {
"help": "As 48 Mhz clock is configured for USB, SYSCLK has to be reduced from 180 to 168 MHz (set 0 for the max SYSCLK value)",
"value": "1",
"macro_name": "CLOCK_SOURCE_USB"
},
"modem_is_on_board": {
"help": "Value: Tells the build system that the modem is on-board as oppose to a plug-in shield/module.",
"value": 1,
"macro_name": "MODEM_ON_BOARD"
},
"modem_data_connection_type": {
"help": "Value: Defines how the modem is wired up to the MCU, e.g., data connection can be a UART or USB and so forth.",
"value": 1,
"macro_name": "MODEM_ON_BOARD_UART"
}
},
"extra_labels_add": ["STM32F4", "STM32F439", "STM32F439VI", "STM32F439xx", "STM32F439xI"],
"macros_add": ["MBEDTLS_CONFIG_HW_SUPPORT", "USB_STM_HAL", "USBHOST_OTHER"],
"device_has_add": ["ANALOGOUT", "CAN", "LOWPOWERTIMER", "SERIAL_FC", "TRNG", "FLASH"],
"detect_code": ["9014"],
"release_versions": ["2", "5"],
"device_name" : "STM32F439VI",
"bootloader_supported": true
},
"DISCO_F051R8": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M0",
"extra_labels_add": ["STM32F0", "STM32F051", "STM32F051R8"],
"supported_toolchains": ["GCC_ARM"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"macros_add": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"device_has_add": ["CRC", "SERIAL_FC"],
"device_has_remove": ["LPTICKER"],
"device_name": "STM32F051R8"
},
"DISCO_F100RB": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M3",
"extra_labels_add": ["STM32F1", "STM32F100RB"],
"supported_toolchains": ["GCC_ARM"],
"device_has_add": [],
"device_has_remove": ["LPTICKER"],
"device_name": "STM32F100RB"
},
"DISCO_F303VC": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F3", "STM32F303", "STM32F303xC", "STM32F303VC"],
"overrides": {"lse_available": 0},
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
"release_versions": ["2", "5"],
"device_has_add": ["ANALOGOUT", "CAN", "CRC", "SERIAL_FC"],
"device_name": "STM32F303VC"
},
"DISCO_F334C8": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F3", "STM32F334x8","STM32F334C8"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"overrides": {"lse_available": 0},
"detect_code": ["0810"],
"device_has_add": ["ANALOGOUT", "CRC", "SERIAL_ASYNCH", "SERIAL_FC"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "STM32F334C8"
},
"DISCO_F407VG": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F407", "STM32F407xG", "STM32F407VG"],
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL | USE_PLL_HSI",
"value": "USE_PLL_HSE_XTAL|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"macros_add": ["USB_STM_HAL"],
"overrides": {"lse_available": 0},
"device_has_add": ["ANALOGOUT"],
"release_versions": ["2", "5"],
"device_name": "STM32F407VG"
},
"DISCO_F429ZI": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F429", "STM32F429ZI", "STM32F429xI", "STM32F429xx"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL | USE_PLL_HSI",
"value": "USE_PLL_HSE_XTAL|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"clock_source_usb": {
"help": "As 48 Mhz clock is configured for USB, SYSCLK has to be reduced from 180 to 168 MHz (set 0 for the max SYSCLK value)",
"value": "1",
"macro_name": "CLOCK_SOURCE_USB"
}
},
"overrides": {"lse_available": 0},
"macros_add": ["USB_STM_HAL", "USBHOST_OTHER"],
"device_has_add": ["ANALOGOUT", "CAN", "SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32F429ZI",
"bootloader_supported": true
},
"DISCO_F469NI": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F469", "STM32F469NI", "STM32F469xI", "STM32F469xx"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL | USE_PLL_HSI",
"value": "USE_PLL_HSE_XTAL|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"detect_code": ["0788"],
"macros_add": ["USB_STM_HAL", "USBHOST_OTHER"],
"device_has_add": ["ANALOGOUT", "CAN", "SERIAL_FC", "TRNG", "FLASH", "QSPI"],
"release_versions": ["2", "5"],
"device_name": "STM32F469NI"
},
"DISCO_L053C8": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M0+",
"extra_labels_add": ["STM32L0", "STM32L053x8", "STM32L053C8"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"overrides": {
"lse_available": 0,
"lpticker_delay_ticks": 4
},
"device_has_add": ["ANALOGOUT", "CRC", "SERIAL_FC", "FLASH"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "STM32L053C8"
},
"DISCO_L072CZ_LRWAN1": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M0+",
"extra_labels_add": ["STM32L0", "STM32L072CZ", "STM32L072xZ", "STM32L072xx"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"overrides": {"lpticker_delay_ticks": 4},
"detect_code": ["0833"],
"device_has_add": ["ANALOGOUT", "SERIAL_FC", "SERIAL_ASYNCH", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32L072CZ"
},
"MTB_MURATA_ABZ": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M0+",
"extra_labels_add": ["STM32L0", "STM32L0x2xZ", "STM32L082CZ", "STM32L082xx"],
"detect_code": ["0456"],
"device_has_add": ["ANALOGOUT", "SERIAL_FC", "SERIAL_ASYNCH", "TRNG", "FLASH"],
"device_has_remove": ["LPTICKER"],
"release_versions": ["5"],
"device_name": "STM32L082CZ"
},
"DISCO_F746NG": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M7F",
"extra_labels_add": ["STM32F7", "STM32F746", "STM32F746xG", "STM32F746NG", "STM_EMAC"],
"supported_form_factors": ["ARDUINO"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL | USE_PLL_HSI",
"value": "USE_PLL_HSE_XTAL|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"usb_speed": {
"help": "Select the USB speed/connector (0=FullSpeed, 1=HighSpeed)",
"value": "1"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"detect_code": ["0815"],
"macros_add": ["USB_STM_HAL", "USBHOST_OTHER"],
"device_has_add": ["ANALOGOUT", "CAN", "EMAC", "SERIAL_ASYNCH", "TRNG", "FLASH", "QSPI"],
"release_versions": ["2", "5"],
"device_name": "STM32F746NG",
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"DISCO_F769NI": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M7FD",
"extra_labels_add": ["STM32F7", "STM32F769", "STM32F769xI", "STM32F769NI", "STM_EMAC"],
"supported_form_factors": ["ARDUINO"],
"config": {
"flash_dual_bank": {
"help": "Default board configuration is Single Bank Flash. If you enable Dual Bank with ST Link Utility, set value to 1",
"value": "0"
},
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"detect_code": ["0817"],
"macros_add": ["USB_STM_HAL", "USBHOST_OTHER"],
"device_has_add": ["ANALOGOUT", "CAN", "EMAC", "SERIAL_ASYNCH", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32F769NI",
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"DISCO_L475VG_IOT01A": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32L4", "STM32L475xG", "STM32L475VG"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"supported_form_factors": ["ARDUINO"],
"detect_code": ["0764"],
"macros_add": ["USBHOST_OTHER", "TWO_RAM_REGIONS"],
"device_has_add": ["ANALOGOUT", "CAN", "SERIAL_FC", "TRNG", "FLASH", "QSPI"],
"release_versions": ["2", "5"],
"device_name": "STM32L475VG",
"bootloader_supported": true
},
"DISCO_L476VG": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32L4", "STM32L476xG", "STM32L476VG"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"detect_code": ["0820"],
"macros_add": ["USBHOST_OTHER", "TWO_RAM_REGIONS"],
"device_has_add": ["ANALOGOUT", "CAN", "SERIAL_FC", "TRNG", "FLASH", "QSPI"],
"release_versions": ["2", "5"],
"device_name": "STM32L476VG",
"bootloader_supported": true
},
"MTS_MDOT_F405RG": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F405RG"],
"is_disk_virtual": true,
"macros_add": ["HSE_VALUE=26000000"],
"device_has_add": ["ANALOGOUT"],
"release_versions": ["2"],
"device_name": "STM32F405RG"
},
"MTS_MDOT_F411RE": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F411RE"],
"macros_add": ["HSE_VALUE=26000000", "USE_PLL_HSE_EXTC=0", "VECT_TAB_OFFSET=0x00010000"],
"post_binary_hook": {
"function": "MTSCode.combine_bins_mts_dot",
"toolchains": ["GCC_ARM", "ARM_STD", "ARM_MICRO", "IAR"]
},
"device_has_add": [],
"release_versions": ["2", "5"],
"device_name": "STM32F411RE"
},
"MTS_DRAGONFLY_F411RE": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F411RE"],
"config": {
"modem_is_on_board": {
"help": "Value: Tells the build system that the modem is on-board as oppose to a plug-in shield/module.",
"value": 1,
"macro_name": "MODEM_ON_BOARD"
},
"modem_data_connection_type": {
"help": "Value: Defines how an on-board modem is wired up to the MCU, e.g., data connection can be a UART or USB and so forth.",
"value": 1,
"macro_name": "MODEM_ON_BOARD_UART"
}
},
"overrides": {"lse_available": 0},
"macros_add": ["HSE_VALUE=26000000", "VECT_TAB_OFFSET=0x08010000"],
"post_binary_hook": {
"function": "MTSCode.combine_bins_mts_dragonfly",
"toolchains": ["GCC_ARM", "ARM_STD", "ARM_MICRO", "IAR"]
},
"device_has_add": [],
"release_versions": ["2", "5"],
"device_name": "STM32F411RE"
},
"MTS_DRAGONFLY_L471QG": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32L4", "STM32L471QG", "STM32L471xG", "STM32L471xx"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
},
"modem_is_on_board": {
"help": "Value: Tells the build system that the modem is on-board as oppose to a plug-in shield/module.",
"value": 1,
"macro_name": "MODEM_ON_BOARD"
},
"modem_data_connection_type": {
"help": "Value: Defines how an on-board modem is wired up to the MCU, e.g., data connection can be a UART or USB and so forth.",
"value": 1,
"macro_name": "MODEM_ON_BOARD_UART"
}
},
"macros_add": ["TWO_RAM_REGIONS"],
"detect_code": ["0312"],
"device_has_add": ["ANALOGOUT", "CAN", "SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32L471QG",
"bootloader_supported": true
},
"MTB_MTS_DRAGONFLY": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F411RE"],
"config": {
"modem_is_on_board": {
"help": "Value: Tells the build system that the modem is on-board as oppose to a plug-in shield/module.",
"value": 1,
"macro_name": "MODEM_ON_BOARD"
},
"modem_data_connection_type": {
"help": "Value: Defines how an on-board modem is wired up to the MCU, e.g., data connection can be a UART or USB and so forth.",
"value": 1,
"macro_name": "MODEM_ON_BOARD_UART"
}
},
"overrides": {
"lse_available": 0
},
"macros_add": ["HSE_VALUE=26000000", "VECT_TAB_OFFSET=0x08010000"],
"post_binary_hook": {
"function": "MTSCode.combine_bins_mtb_mts_dragonfly",
"toolchains": ["GCC_ARM", "ARM_STD", "ARM_MICRO", "IAR"]
},
"release_versions": ["2", "5"],
"device_name": "STM32F411RE",
"bootloader_supported": true
},
"XDOT_L151CC": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M3",
"default_toolchain": "ARM",
"extra_labels_add": ["STM32L1", "STM32L151CC"],
"config": {
"hse_value": {
"value": "24000000",
"macro_name": "HSE_VALUE"
}
},
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"device_has_add": ["ANALOGOUT", "FLASH"],
"release_versions": ["5"],
"device_name": "STM32L151CC",
"bootloader_supported": true
},
"FF1705_L151CC": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["XDOT_L151CC"],
"detect_code": ["8080"]
},
"MTB_MTS_XDOT": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M3",
"default_toolchain": "ARM",
"extra_labels_add": ["STM32L1", "STM32L151CC"],
"config": {
"hse_value": {
"value": "24000000",
"macro_name": "HSE_VALUE"
}
},
"overrides": {
"stdio_uart_tx": "PA_2",
"stdio_uart_rx": "PA_3"
},
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"device_has_add": ["ANALOGOUT", "FLASH"],
"release_versions": ["5"],
"device_name": "STM32L151CC",
"bootloader_supported": true
},
"MTB_RAK811": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M3",
"default_toolchain": "ARM",
"extra_labels_add": ["STM32L1", "STM32L151xBA", "STM32L151CBA"],
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"device_has_add": ["ANALOGOUT"],
"release_versions": ["5"],
"device_name": "STM32L151CBxxA",
"bootloader_supported": true
},
"MOTE_L152RC": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M3",
"default_toolchain": "ARM",
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"extra_labels_add": ["STM32L1", "STM32L152RC"],
"detect_code": ["4100"],
"device_has_add": ["ANALOGOUT", "SERIAL_ASYNCH", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32L152RC"
},
"DISCO_F401VC": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"default_toolchain": "GCC_ARM",
"extra_labels_add": ["STM32F4", "STM32F401", "STM32F401xC", "STM32F401VC"],
"supported_toolchains": ["GCC_ARM"],
"device_has_add": [],
"device_name": "STM32F401VC"
},
"MODULE_UBLOX_ODIN_W2": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F439", "STM32F439ZI","STM32F439xx", "STM32F439xI", "STM_EMAC"],
"macros": ["MBEDTLS_CONFIG_HW_SUPPORT", "HSE_VALUE=24000000", "HSE_STARTUP_TIMEOUT=5000", "CB_INTERFACE_SDIO","CB_CHIP_WL18XX","SUPPORT_80211D_ALWAYS","WLAN_ENABLED","CB_FEATURE_802DOT11W","CB_FEATURE_802DOT11R","MBEDTLS_ARC4_C","MBEDTLS_DES_C","MBEDTLS_MD4_C","MBEDTLS_MD5_C","MBEDTLS_SHA1_C"],
"device_has_add": ["CAN", "EMAC", "TRNG", "FLASH", "WIFI"],
"device_has_remove": [],
"device_name": "STM32F439ZI",
"public": false,
"bootloader_supported": true,
"overrides": {
"network-default-interface-type": "WIFI"
}
},
"UBLOX_EVK_ODIN_W2": {
"inherits": ["MODULE_UBLOX_ODIN_W2"],
"supported_form_factors": ["ARDUINO"],
"release_versions": ["5"],
"device_has_remove": [],
"config": {
"stdio_uart_tx_help": {
"help": "Value: D8(default) or D1"
},
"stdio_uart_rx_help": {
"help": "Value: D2(default) or D0"
}
},
"overrides": {
"stdio_uart_tx": "D8",
"stdio_uart_rx": "D2"
}
},
"MBED_CONNECT_ODIN": {
"inherits": ["MODULE_UBLOX_ODIN_W2"],
"release_versions": ["5"],
"config": {
"stdio_uart_tx_help": {
"help": "Value: PA_9(default) or PD_8"
},
"stdio_uart_rx_help": {
"help": "Value: PA_10(default) or PD_9"
}
},
"overrides": {
"stdio_uart_tx": "PA_9",
"stdio_uart_rx": "PA_10"
}
},
"MTB_UBLOX_ODIN_W2": {
"inherits": ["MODULE_UBLOX_ODIN_W2"],
"device_has_add": [],
"release_versions": ["5"]
},
"UBLOX_C030": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M4F",
"supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
"extra_labels_add": ["STM32F4", "STM32F437", "STM32F437VG", "STM32F437xx", "STM32F437xG", "STM_EMAC"],
"config": {
"modem_is_on_board": {
"help": "Value: Tells the build system that the modem is on-board as oppose to a plug-in shield/module.",
"value": 1,
"macro_name": "MODEM_ON_BOARD"
},
"modem_data_connection_type": {
"help": "Value: Defines how the modem is wired up to the MCU, e.g., data connection can be a UART or USB and so forth.",
"value": 1,
"macro_name": "MODEM_ON_BOARD_UART"
}
},
"macros_add": ["MBEDTLS_CONFIG_HW_SUPPORT", "HSE_VALUE=12000000", "GNSSBAUD=9600"],
"overrides": {"lse_available": 0},
"device_has_add": ["ANALOGOUT", "EMAC", "SERIAL_FC", "TRNG", "FLASH"],
"public": false,
"device_name": "STM32F437VG",
"bootloader_supported": true,
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"UBLOX_C030_U201": {
"inherits": ["UBLOX_C030"],
"release_versions": ["5"]
},
"UBLOX_C030_N211": {
"inherits": ["UBLOX_C030"],
"release_versions": ["5"]
},
"UBLOX_C030_R410M": {
"inherits": ["UBLOX_C030"],
"release_versions": ["5"]
},
"NZ32_SC151": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M3",
"default_toolchain": "uARM",
"program_cycle_s": 1.5,
"extra_labels_add": ["STM32L1", "STM32L151RC"],
"overrides": {"lse_available": 0},
"supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
"device_has_add": ["ANALOGOUT"],
"default_lib": "small",
"device_name": "STM32L151RC"
},
"MCU_NRF51": {
"inherits": ["Target"],
"core": "Cortex-M0",
"OVERRIDE_BOOTLOADER_FILENAME": "nrf51822_bootloader.hex",
"macros": ["NRF51", "TARGET_NRF51822", "CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"MERGE_BOOTLOADER": false,
"extra_labels": ["NORDIC", "MCU_NRF51", "MCU_NRF51822"],
"OUTPUT_EXT": "hex",
"is_disk_virtual": true,
"supported_toolchains": ["ARM", "GCC_ARM"],
"public": false,
"MERGE_SOFT_DEVICE": true,
"EXPECTED_SOFTDEVICES_WITH_OFFSETS": [
{
"boot": "s130_nrf51_1.0.0_bootloader.hex",
"name": "s130_nrf51_1.0.0_softdevice.hex",
"offset": 114688
},
{
"boot": "s110_nrf51822_8.0.0_bootloader.hex",
"name": "s110_nrf51822_8.0.0_softdevice.hex",
"offset": 98304
},
{
"boot": "s110_nrf51822_7.1.0_bootloader.hex",
"name": "s110_nrf51822_7.1.0_softdevice.hex",
"offset": 90112
},
{
"boot": "s110_nrf51822_7.0.0_bootloader.hex",
"name": "s110_nrf51822_7.0.0_softdevice.hex",
"offset": 90112
},
{
"boot": "s110_nrf51822_6.0.0_bootloader.hex",
"name": "s110_nrf51822_6.0.0_softdevice.hex",
"offset": 81920
}
],
"detect_code": ["1070"],
"post_binary_hook": {
"function": "MCU_NRF51Code.binary_hook",
"toolchains": ["ARM_STD", "GCC_ARM"]
},
"program_cycle_s": 6,
"features": ["BLE"],
"device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
},
"MCU_NRF51_16K_BASE": {
"inherits": ["MCU_NRF51"],
"extra_labels_add": ["MCU_NORDIC_16K", "MCU_NRF51_16K"],
"macros_add": ["TARGET_MCU_NORDIC_16K", "TARGET_MCU_NRF51_16K"],
"public": false,
"default_lib": "small"
},
"MCU_NRF51_16K_BOOT_BASE": {
"inherits": ["MCU_NRF51_16K_BASE"],
"MERGE_BOOTLOADER": true,
"extra_labels_add": ["MCU_NRF51_16K_BOOT"],
"macros_add": ["TARGET_MCU_NRF51_16K_BOOT", "TARGET_OTA_ENABLED"],
"public": false
},
"MCU_NRF51_16K_OTA_BASE": {
"inherits": ["MCU_NRF51_16K_BASE"],
"public": false,
"extra_labels_add": ["MCU_NRF51_16K_OTA"],
"macros_add": ["TARGET_MCU_NRF51_16K_OTA", "TARGET_OTA_ENABLED"],
"MERGE_SOFT_DEVICE": false
},
"MCU_NRF51_16K": {
"inherits": ["MCU_NRF51_16K_BASE"],
"extra_labels_add": ["MCU_NRF51_16K_S130"],
"macros_add": ["TARGET_MCU_NRF51_16K_S130"],
"public": false
},
"MCU_NRF51_S110": {
"extra_labels_add": ["MCU_NRF51_16K_S110"],
"macros_add": ["TARGET_MCU_NRF51_16K_S110"],
"EXPECTED_SOFTDEVICES_WITH_OFFSETS": [
{
"name": "s110_nrf51822_8.0.0_softdevice.hex",
"boot": "s110_nrf51822_8.0.0_bootloader.hex",
"offset": 98304
},
{
"name": "s110_nrf51822_7.1.0_softdevice.hex",
"boot": "s110_nrf51822_7.1.0_bootloader.hex",
"offset": 90112
}
],
"public": false
},
"MCU_NRF51_16K_S110": {
"inherits": ["MCU_NRF51_S110", "MCU_NRF51_16K_BASE"],
"public": false
},
"MCU_NRF51_16K_BOOT": {
"inherits": ["MCU_NRF51_16K_BOOT_BASE"],
"extra_labels_add": ["MCU_NRF51_16K_S130"],
"macros_add": ["TARGET_MCU_NRF51_16K_S130"],
"public": false
},
"MCU_NRF51_16K_BOOT_S110": {
"inherits": ["MCU_NRF51_S110", "MCU_NRF51_16K_BOOT_BASE"],
"public": false
},
"MCU_NRF51_16K_OTA": {
"inherits": ["MCU_NRF51_16K_OTA_BASE"],
"extra_labels_add": ["MCU_NRF51_16K_S130"],
"macros_add": ["TARGET_MCU_NRF51_16K_S130"],
"public": false
},
"MCU_NRF51_16K_OTA_S110": {
"inherits": ["MCU_NRF51_S110", "MCU_NRF51_16K_OTA_BASE"],
"public": false
},
"MCU_NRF51_32K": {
"inherits": ["MCU_NRF51"],
"extra_labels_add": ["MCU_NORDIC_32K", "MCU_NRF51_32K"],
"macros_add": ["TARGET_MCU_NORDIC_32K", "TARGET_MCU_NRF51_32K"],
"public": false
},
"MCU_NRF51_32K_BOOT": {
"inherits": ["MCU_NRF51_32K"],
"MERGE_BOOTLOADER": true,
"extra_labels_add": ["MCU_NRF51_32K_BOOT"],
"macros_add": ["TARGET_MCU_NRF51_32K_BOOT", "TARGET_OTA_ENABLED"],
"public": false
},
"MCU_NRF51_32K_OTA": {
"inherits": ["MCU_NRF51_32K"],
"public": false,
"extra_labels_add": ["MCU_NRF51_32K_OTA"],
"macros_add": ["TARGET_MCU_NRF51_32K_OTA", "TARGET_OTA_ENABLED"],
"MERGE_SOFT_DEVICE": false
},
"NRF51822": {
"inherits": ["MCU_NRF51_16K"],
"extra_labels_add": ["NRF51822", "NRF51822_MKIT"],
"macros_add": ["TARGET_NRF51822_MKIT"],
"release_versions": ["2"],
"device_name": "nRF51822_xxAA"
},
"NRF51822_BOOT": {
"inherits": ["MCU_NRF51_16K_BOOT"],
"extra_labels_add": ["NRF51822", "NRF51822_MKIT"],
"macros_add": ["TARGET_NRF51822_MKIT"]
},
"NRF51822_OTA": {
"inherits": ["MCU_NRF51_16K_OTA"],
"extra_labels_add": ["NRF51822", "NRF51822_MKIT"],
"macros_add": ["TARGET_NRF51822_MKIT"]
},
"ARCH_BLE": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_16K"],
"release_versions": ["2"],
"device_name": "nRF51822_xxAA"
},
"ARCH_BLE_BOOT": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_16K_BOOT"],
"extra_labels_add": ["ARCH_BLE"],
"macros_add": ["TARGET_ARCH_BLE"]
},
"ARCH_BLE_OTA": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_16K_OTA"],
"extra_labels_add": ["ARCH_BLE"],
"macros_add": ["TARGET_ARCH_BLE"]
},
"ARCH_LINK": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_16K"],
"extra_labels_add": ["ARCH_BLE"],
"macros_add": ["TARGET_ARCH_BLE"]
},
"ARCH_LINK_BOOT": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_16K_BOOT"],
"extra_labels_add": ["ARCH_BLE", "ARCH_LINK"],
"macros_add": ["TARGET_ARCH_BLE", "TARGET_ARCH_LINK"]
},
"ARCH_LINK_OTA": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_16K_OTA"],
"extra_labels_add": ["ARCH_BLE", "ARCH_LINK"],
"macros_add": ["TARGET_ARCH_BLE", "TARGET_ARCH_LINK"]
},
"SEEED_TINY_BLE": {
"inherits": ["MCU_NRF51_16K"],
"release_versions": ["2"],
"device_name": "nRF51822_xxAA"
},
"SEEED_TINY_BLE_BOOT": {
"inherits": ["MCU_NRF51_16K_BOOT"],
"extra_labels_add": ["SEEED_TINY_BLE"],
"macros_add": ["TARGET_SEEED_TINY_BLE"]
},
"SEEED_TINY_BLE_OTA": {
"inherits": ["MCU_NRF51_16K_OTA"],
"extra_labels_add": ["SEEED_TINY_BLE"],
"macros_add": ["TARGET_SEEED_TINY_BLE"]
},
"HRM1017": {
"inherits": ["MCU_NRF51_16K"],
"macros_add": ["TARGET_NRF_LFCLK_RC"],
"release_versions": ["2"],
"device_name": "nRF51822_xxAA"
},
"HRM1017_BOOT": {
"inherits": ["MCU_NRF51_16K_BOOT"],
"extra_labels_add": ["HRM1017"],
"macros_add": ["TARGET_HRM1017", "TARGET_NRF_LFCLK_RC"]
},
"HRM1017_OTA": {
"inherits": ["MCU_NRF51_16K_OTA"],
"extra_labels_add": ["HRM1017"],
"macros_add": ["TARGET_HRM1017", "TARGET_NRF_LFCLK_RC"]
},
"RBLAB_NRF51822": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_16K"],
"release_versions": ["2"],
"device_name": "nRF51822_xxAA"
},
"RBLAB_NRF51822_BOOT": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_16K_BOOT"],
"extra_labels_add": ["RBLAB_NRF51822"],
"macros_add": ["TARGET_RBLAB_NRF51822"]
},
"RBLAB_NRF51822_OTA": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_16K_OTA"],
"extra_labels_add": ["RBLAB_NRF51822"],
"macros_add": ["TARGET_RBLAB_NRF51822"]
},
"RBLAB_BLENANO": {
"inherits": ["MCU_NRF51_16K"],
"release_versions": ["2"]
},
"RBLAB_BLENANO_BOOT": {
"inherits": ["MCU_NRF51_16K_BOOT"],
"extra_labels_add": ["RBLAB_BLENANO"],
"macros_add": ["TARGET_RBLAB_BLENANO"]
},
"RBLAB_BLENANO_OTA": {
"inherits": ["MCU_NRF51_16K_OTA"],
"extra_labels_add": ["RBLAB_BLENANO"],
"macros_add": ["TARGET_RBLAB_BLENANO"]
},
"RBLAB_BLENANO2": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF52832"],
"release_versions": ["5"],
"device_name": "nRF52832_xxAA"
},
"NRF51822_Y5_MBUG": {
"inherits": ["MCU_NRF51_16K"]
},
"WALLBOT_BLE": {
"inherits": ["MCU_NRF51_16K"],
"release_versions": ["2"]
},
"WALLBOT_BLE_BOOT": {
"inherits": ["MCU_NRF51_16K_BOOT"],
"extra_labels_add": ["WALLBOT_BLE"],
"macros_add": ["TARGET_WALLBOT_BLE"]
},
"WALLBOT_BLE_OTA": {
"inherits": ["MCU_NRF51_16K_OTA"],
"extra_labels_add": ["WALLBOT_BLE"],
"macros_add": ["TARGET_WALLBOT_BLE"]
},
"DELTA_DFCM_NNN40": {
"inherits": ["MCU_NRF51_32K"],
"program_cycle_s": 10,
"macros_add": ["TARGET_NRF_LFCLK_RC"],
"device_has": ["ANALOGIN", "DEBUG_AWARENESS", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
"release_versions": ["2"],
"device_name": "nRF51822_xxAA"
},
"DELTA_DFCM_NNN40_BOOT": {
"inherits": ["MCU_NRF51_32K_BOOT"],
"program_cycle_s": 10,
"extra_labels_add": ["DELTA_DFCM_NNN40"],
"macros_add": ["TARGET_DELTA_DFCM_NNN40", "TARGET_NRF_LFCLK_RC"]
},
"DELTA_DFCM_NNN40_OTA": {
"inherits": ["MCU_NRF51_32K_OTA"],
"program_cycle_s": 10,
"extra_labels_add": ["DELTA_DFCM_NNN40"],
"macros_add": ["TARGET_DELTA_DFCM_NNN40", "TARGET_NRF_LFCLK_RC"]
},
"DELTA_DFCM_NNN50": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_32K_UNIFIED"],
"device_has": ["USTICKER", "LPTICKER", "ANALOGIN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
"device_name": "nRF51822_xxAC"
},
"DELTA_DFCM_NNN50_BOOT": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_32K_BOOT"],
"extra_labels_add": ["DELTA_DFCM_NNN50"],
"macros_add": ["TARGET_DELTA_DFCM_NNN50"]
},
"DELTA_DFCM_NNN50_OTA": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_32K_OTA"],
"extra_labels_add": ["DELTA_DFCM_NNN50"],
"macros_add": ["TARGET_DELTA_DFCM_NNN50"]
},
"NRF51_DK_LEGACY": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_32K"],
"extra_labels_add": ["NRF51_DK"]
},
"NRF51_DK_BOOT": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_32K_BOOT"],
"extra_labels_add": ["NRF51_DK"],
"macros_add": ["TARGET_NRF51_DK"]
},
"NRF51_DK_OTA": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_32K_OTA"],
"extra_labels_add": ["NRF51_DK"],
"macros_add": ["TARGET_NRF51_DK"]
},
"NRF51_DONGLE_LEGACY": {
"inherits": ["MCU_NRF51_32K"],
"extra_labels_add": ["NRF51_DONGLE"],
"release_versions": ["2"],
"device_name": "nRF51822_xxAA"
},
"NRF51_DONGLE_BOOT": {
"inherits": ["MCU_NRF51_32K_BOOT"],
"extra_labels_add": ["NRF51_DONGLE"],
"macros_add": ["TARGET_NRF51_DONGLE"]
},
"NRF51_DONGLE_OTA": {
"inherits": ["MCU_NRF51_32K_OTA"],
"extra_labels_add": ["NRF51_DONGLE"],
"macros_add": ["TARGET_NRF51_DONGLE"]
},
"NRF51_MICROBIT": {
"inherits": ["MCU_NRF51_16K_S110"],
"macros_add": ["TARGET_NRF_LFCLK_RC"],
"release_versions": ["2"],
"device_name": "nRF51822_xxAA"
},
"NRF51_MICROBIT_BOOT": {
"inherits": ["MCU_NRF51_16K_BOOT_S110"],
"extra_labels_add": ["NRF51_MICROBIT"],
"macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"]
},
"NRF51_MICROBIT_OTA": {
"inherits": ["MCU_NRF51_16K_OTA_S110"],
"extra_labels_add": ["NRF51_MICROBIT"],
"macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"]
},
"NRF51_MICROBIT_B": {
"inherits": ["MCU_NRF51_16K"],
"extra_labels_add": ["NRF51_MICROBIT"],
"macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"],
"release_versions": ["2"]
},
"NRF51_MICROBIT_B_BOOT": {
"inherits": ["MCU_NRF51_16K_BOOT"],
"extra_labels_add": ["NRF51_MICROBIT"],
"macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"]
},
"NRF51_MICROBIT_B_OTA": {
"inherits": ["MCU_NRF51_16K_OTA"],
"extra_labels_add": ["NRF51_MICROBIT"],
"macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"]
},
"MTM_MTCONNECT04S": {
"inherits": ["MCU_NRF51_32K"],
"release_versions": ["2"],
"device_name": "nRF51822_xxAA"
},
"MTM_MTCONNECT04S_BOOT": {
"inherits": ["MCU_NRF51_32K_BOOT"],
"extra_labels_add": ["MTM_CONNECT04S"],
"macros_add": ["TARGET_MTM_CONNECT04S"]
},
"MTM_MTCONNECT04S_OTA": {
"inherits": ["MCU_NRF51_32K_OTA"],
"extra_labels_add": ["MTM_CONNECT04S"],
"macros_add": ["TARGET_MTM_CONNECT04S"]
},
"MTB_LAIRD_BL600": {
"inherits": ["MCU_NRF51_32K_UNIFIED"],
"device_has": ["USTICKER", "LPTICKER", "ANALOGIN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
"device_name": "nRF51822_xxAA",
"release_versions" : ["5"],
"extra_labels_add": ["MTB_LAIRD_BL600"],
"config": {
"usb_tx": {
"help": "Value SIO_21",
"value": "SIO_21"
},
"usb_rx": {
"help": "Value SIO_22",
"value": "SIO_22"
},
"stdio_uart": {
"help": "Value: UART_0",
"value": "UART_0",
"macro_name": "STDIO_UART"
}
},
"overrides": {
"uart_hwfc": 0
}
},
"TY51822R3": {
"inherits": ["MCU_NRF51_32K_UNIFIED"],
"macros_add": ["TARGET_NRF_32MHZ_XTAL"],
"device_has": ["USTICKER", "LPTICKER", "ANALOGIN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
"detect_code": ["1019"],
"release_versions": ["2", "5"],
"overrides": {"uart_hwfc": 0},
"device_name": "nRF51822_xxAA"
},
"TY51822R3_BOOT": {
"inherits": ["MCU_NRF51_32K_BOOT"],
"extra_labels_add": ["TY51822R3"],
"macros_add": ["TARGET_TY51822R3", "TARGET_NRF_32MHZ_XTAL"]
},
"TY51822R3_OTA": {
"inherits": ["MCU_NRF51_32K_OTA"],
"extra_labels_add": ["NRF51_DK"],
"macros_add": ["TARGET_TY51822R3", "TARGET_NRF_32MHZ_XTAL"]
},
"ARM_MPS2_Target": {
"inherits": ["Target"],
"public": false,
"device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"]
},
"ARM_MPS2_M0": {
"inherits": ["ARM_MPS2_Target"],
"core": "Cortex-M0",
"supported_toolchains": ["ARM"],
"extra_labels": ["ARM_SSG", "MPS2", "MPS2_M0"],
"macros": ["CMSDK_CM0", "CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
"release_versions": ["2"]
},
"ARM_MPS2_M0P": {
"inherits": ["ARM_MPS2_Target"],
"core": "Cortex-M0+",
"supported_toolchains": ["ARM"],
"extra_labels": ["ARM_SSG", "MPS2", "MPS2_M0P"],
"macros": ["CMSDK_CM0plus"],
"device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
"release_versions": ["2"]
},
"ARM_MPS2_M3": {
"inherits": ["ARM_MPS2_Target"],
"core": "Cortex-M3",
"supported_toolchains": ["ARM"],
"extra_labels": ["ARM_SSG", "MPS2", "MPS2_M3"],
"macros": ["CMSDK_CM3"],
"device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
"release_versions": ["2"]
},
"ARM_MPS2_M4": {
"inherits": ["ARM_MPS2_Target"],
"core": "Cortex-M4F",
"supported_toolchains": ["ARM"],
"extra_labels": ["ARM_SSG", "MPS2", "MPS2_M4"],
"macros": ["CMSDK_CM4"],
"device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
"release_versions": ["2"]
},
"ARM_MPS2_M7": {
"inherits": ["ARM_MPS2_Target"],
"core": "Cortex-M7",
"supported_toolchains": ["ARM"],
"extra_labels": ["ARM_SSG", "MPS2", "MPS2_M7"],
"macros": ["CMSDK_CM7"],
"device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
"release_versions": ["2"]
},
"ARM_IOTSS_Target": {
"inherits": ["Target"],
"public": false,
"device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"]
},
"ARM_IOTSS_BEID": {
"inherits": ["ARM_IOTSS_Target"],
"core": "Cortex-M3",
"supported_toolchains": ["ARM"],
"extra_labels": ["ARM_SSG", "IOTSS", "IOTSS_BEID"],
"macros": ["CMSDK_BEID"],
"device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
"release_versions": ["2"]
},
"ARM_CM3DS_MPS2": {
"inherits": ["ARM_IOTSS_Target"],
"core": "Cortex-M3",
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"extra_labels": ["ARM_SSG", "CM3DS_MPS2"],
"OUTPUT_EXT": "elf",
"macros": ["CMSDK_CM3DS"],
"device_has": ["ANALOGIN", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SPI", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"copy_method": "mps2",
"reset_method": "reboot.txt"
},
"ARM_BEETLE_SOC": {
"inherits": ["ARM_IOTSS_Target"],
"core": "Cortex-M3",
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"default_toolchain": "ARM",
"extra_labels": ["ARM_SSG", "BEETLE"],
"macros": ["CMSDK_BEETLE", "WSF_MS_PER_TICK=20", "WSF_TOKEN_ENABLED=FALSE", "WSF_TRACE_ENABLED=TRUE", "WSF_ASSERT_ENABLED=FALSE", "WSF_PRINTF_MAX_LEN=128", "ASIC", "CONFIG_HOST_REV=0x20", "CONFIG_ALLOW_DEEP_SLEEP=FALSE", "HCI_VS_TARGET", "CONFIG_ALLOW_SETTING_WRITE=TRUE", "WSF_MAX_HANDLERS=20", "NO_LEDS"],
"device_has": ["ANALOGIN", "CLCD", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SLEEP", "SPI"],
"features": ["BLE"],
"release_versions": ["2", "5"]
},
"RZ_A1XX": {
"inherits": ["Target"],
"core": "Cortex-A9",
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"extra_labels": ["RENESAS", "RZ_A1XX"],
"device_has": ["SLEEP", "USTICKER", "RTC", "ANALOGIN", "CAN", "ETHERNET", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
"program_cycle_s": 2,
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"RZ_A1H": {
"inherits": ["RZ_A1XX"],
"supported_form_factors": ["ARDUINO"],
"extra_labels_add": ["RZA1H", "MBRZA1H", "RZ_A1_EMAC"],
"device_has_add": ["EMAC", "FLASH", "LPTICKER"],
"release_versions": ["2", "5"],
"device_name": "R7S72100",
"bootloader_supported": true
},
"VK_RZ_A1H": {
"inherits": ["RZ_A1XX"],
"extra_labels_add": ["RZA1H", "VKRZA1H", "RZ_A1_EMAC"],
"device_has_add": ["EMAC"],
"release_versions": ["2", "5"]
},
"GR_LYCHEE": {
"inherits": ["RZ_A1XX"],
"supported_form_factors": ["ARDUINO"],
"extra_labels_add": ["RZA1UL", "MBRZA1LU"],
"device_has_add": ["TRNG", "FLASH", "LPTICKER"],
"device_has_remove": ["ETHERNET"],
"release_versions": ["2", "5"],
"device_name": "R7S72103",
"bootloader_supported": true,
"overrides": {
"network-default-interface-type": null
}
},
"MAXWSNENV": {
"inherits": ["Target"],
"core": "Cortex-M3",
"macros": ["__SYSTEM_HFX=24000000"],
"extra_labels": ["Maxim", "MAX32610"],
"supported_toolchains": ["GCC_ARM", "IAR", "ARM"],
"device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "STDIO_MESSAGES"],
"features": ["BLE"],
"release_versions": []
},
"MAX32600MBED": {
"inherits": ["Target"],
"core": "Cortex-M3",
"macros": ["__SYSTEM_HFX=24000000"],
"extra_labels": ["Maxim", "MAX32600"],
"supported_toolchains": ["GCC_ARM", "IAR", "ARM"],
"device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "STDIO_MESSAGES"],
"release_versions": ["2", "5"]
},
"MAX32620HSP": {
"inherits": ["Target"],
"core": "Cortex-M4F",
"extra_labels": ["Maxim", "MAX32620"],
"supported_toolchains": ["GCC_ARM", "IAR", "ARM"],
"device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPI_ASYNCH", "STDIO_MESSAGES"],
"features": ["BLE"],
"release_versions": []
},
"MAX32620FTHR": {
"inherits": ["Target"],
"core": "Cortex-M4F",
"macros": ["__SYSTEM_HFX=96000000","TARGET=MAX32620","TARGET_REV=0x4332","OPEN_DRAIN_LEDS"],
"extra_labels": ["Maxim", "MAX32620C"],
"supported_toolchains": ["GCC_ARM", "IAR", "ARM"],
"device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "LPTICKER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "STDIO_MESSAGES", "USTICKER"],
"release_versions": ["2", "5"]
},
"SDT32620B": {
"inherits": ["Target"],
"core": "Cortex-M4F",
"macros": ["__SYSTEM_HFX=96000000","TARGET=MAX32620","TARGET_REV=0x4332","OPEN_DRAIN_LEDS"],
"detect_code": ["3101"],
"extra_labels": ["Maxim", "MAX32620C"],
"supported_toolchains": ["GCC_ARM", "IAR", "ARM"],
"device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "LPTICKER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "STDIO_MESSAGES", "USTICKER"],
"release_versions": ["2", "5"]
},
"MAX32625_BASE": {
"inherits": ["Target"],
"core": "Cortex-M4F",
"macros": ["TARGET=MAX32625","TARGET_REV=0x4132", "OPEN_DRAIN_LEDS"],
"extra_labels": ["Maxim", "MAX32625"],
"supported_toolchains": ["GCC_ARM", "IAR", "ARM"],
"device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "LPTICKER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "STDIO_MESSAGES", "USTICKER"],
"device_name": "MAX32625",
"release_versions": ["2", "5"],
"public": false
},
"MAX32625MBED": {
"inherits": ["MAX32625_BASE"],
"extra_labels_add": ["MAX32625_NO_BOOT"]
},
"SDT32625B": {
"inherits": ["MAX32625_BASE"],
"extra_labels_add": ["MAX32625_NO_BOOT"],
"detect_code": ["3102"]
},
"MAX32625PICO": {
"inherits": ["MAX32625_BASE"],
"extra_labels_add": ["MAX32625_BOOT"],
"bootloader_supported": true
},
"MAX32625NEXPAQ": {
"inherits": ["MAX32625_BASE"]
},
"MAX32630FTHR": {
"inherits": ["Target"],
"core": "Cortex-M4F",
"macros": ["__SYSTEM_HFX=96000000", "TARGET=MAX32630", "TARGET_REV=0x4132", "BLE_HCI_UART", "OPEN_DRAIN_LEDS"],
"extra_labels": ["Maxim", "MAX32630"],
"supported_toolchains": ["GCC_ARM", "IAR", "ARM"],
"device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "LPTICKER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_FC", "SPI", "STDIO_MESSAGES", "USTICKER"],
"features": ["BLE"],
"release_versions": ["2", "5"]
},
"EFM32": {
"inherits": ["Target"],
"extra_labels": ["Silicon_Labs", "EFM32"],
"macros": ["MBEDTLS_CONFIG_HW_SUPPORT", "MBED_TICKLESS", "EM_MSC_RUN_FROM_FLASH"],
"public": false
},
"EFM32GG990F1024": {
"inherits": ["EFM32"],
"extra_labels_add": ["EFM32GG", "1024K", "SL_AES"],
"core": "Cortex-M3",
"macros_add": ["EFM32GG990F1024", "TRANSACTION_QUEUE_SIZE_SPI=4"],
"supported_toolchains": ["GCC_ARM", "ARM", "uARM", "IAR"],
"release_versions": ["2", "5"],
"device_name": "EFM32GG990F1024",
"public": false,
"bootloader_supported": true
},
"EFM32GG_STK3700": {
"inherits": ["EFM32GG990F1024"],
"progen": {"target": "efm32gg-stk"},
"device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LPTICKER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES", "USTICKER", "FLASH", "ITM"],
"forced_reset_timeout": 2,
"config": {
"hf_clock_src": {
"help": "Value: HFXO for external crystal, HFRCO for internal RC oscillator",
"value": "HFXO",
"macro_name": "CORE_CLOCK_SOURCE"
},
"hfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "48000000",
"macro_name": "HFXO_FREQUENCY"
},
"lf_clock_src": {
"help": "Value: LFXO for external crystal, LFRCO for internal RC oscillator, ULFRCO for internal 1KHz RC oscillator",
"value": "LFXO",
"macro_name": "LOW_ENERGY_CLOCK_SOURCE"
},
"lfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "32768",
"macro_name": "LFXO_FREQUENCY"
},
"hfrco_clock_freq": {
"help": "Value: Frequency in hertz, must correspond to setting of hfrco_band_select",
"value": "21000000",
"macro_name": "HFRCO_FREQUENCY"
},
"hfrco_band_select": {
"help": "Value: One of _CMU_HFRCOCTRL_BAND_28MHZ, _CMU_HFRCOCTRL_BAND_21MHZ, _CMU_HFRCOCTRL_BAND_14MHZ, _CMU_HFRCOCTRL_BAND_11MHZ, _CMU_HFRCOCTRL_BAND_7MHZ, _CMU_HFRCOCTRL_BAND_1MHZ. Be sure to set hfrco_clock_freq accordingly!",
"value": "_CMU_HFRCOCTRL_BAND_21MHZ",
"macro_name": "HFRCO_FREQUENCY_ENUM"
},
"board_controller_enable": {
"help": "Pin to pull high for enabling the USB serial port",
"value": "PF7",
"macro_name": "EFM_BC_EN"
}
}
},
"EFM32LG990F256": {
"inherits": ["EFM32"],
"extra_labels_add": ["EFM32LG", "256K", "SL_AES"],
"core": "Cortex-M3",
"macros_add": ["EFM32LG990F256", "TRANSACTION_QUEUE_SIZE_SPI=4"],
"supported_toolchains": ["GCC_ARM", "ARM", "uARM", "IAR"],
"release_versions": ["2", "5"],
"device_name": "EFM32LG990F256",
"public": false,
"bootloader_supported": true
},
"EFM32LG_STK3600": {
"inherits": ["EFM32LG990F256"],
"device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LPTICKER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES", "USTICKER", "FLASH"],
"forced_reset_timeout": 2,
"device_name": "EFM32LG990F256",
"config": {
"hf_clock_src": {
"help": "Value: HFXO for external crystal, HFRCO for internal RC oscillator",
"value": "HFXO",
"macro_name": "CORE_CLOCK_SOURCE"
},
"hfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "48000000",
"macro_name": "HFXO_FREQUENCY"
},
"lf_clock_src": {
"help": "Value: LFXO for external crystal, LFRCO for internal RC oscillator, ULFRCO for internal 1KHz RC oscillator",
"value": "LFXO",
"macro_name": "LOW_ENERGY_CLOCK_SOURCE"
},
"lfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "32768",
"macro_name": "LFXO_FREQUENCY"
},
"hfrco_clock_freq": {
"help": "Value: Frequency in hertz, must correspond to setting of hfrco_band_select",
"value": "21000000",
"macro_name": "HFRCO_FREQUENCY"
},
"hfrco_band_select": {
"help": "Value: One of _CMU_HFRCOCTRL_BAND_28MHZ, _CMU_HFRCOCTRL_BAND_21MHZ, _CMU_HFRCOCTRL_BAND_14MHZ, _CMU_HFRCOCTRL_BAND_11MHZ, _CMU_HFRCOCTRL_BAND_7MHZ, _CMU_HFRCOCTRL_BAND_1MHZ. Be sure to set hfrco_clock_freq accordingly!",
"value": "_CMU_HFRCOCTRL_BAND_21MHZ",
"macro_name": "HFRCO_FREQUENCY_ENUM"
},
"board_controller_enable": {
"help": "Pin to pull high for enabling the USB serial port",
"value": "PF7",
"macro_name": "EFM_BC_EN"
}
}
},
"EFM32WG990F256": {
"inherits": ["EFM32"],
"extra_labels_add": ["EFM32WG", "256K", "SL_AES"],
"core": "Cortex-M4F",
"macros_add": ["EFM32WG990F256", "TRANSACTION_QUEUE_SIZE_SPI=4"],
"supported_toolchains": ["GCC_ARM", "ARM", "uARM", "IAR"],
"release_versions": ["2", "5"],
"device_name": "EFM32WG990F256",
"public": false,
"bootloader_supported": true
},
"EFM32WG_STK3800": {
"inherits": ["EFM32WG990F256"],
"progen": {"target": "efm32wg-stk"},
"device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LPTICKER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES", "USTICKER", "FLASH"],
"forced_reset_timeout": 2,
"config": {
"hf_clock_src": {
"help": "Value: HFXO for external crystal, HFRCO for internal RC oscillator",
"value": "HFXO",
"macro_name": "CORE_CLOCK_SOURCE"
},
"hfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "48000000",
"macro_name": "HFXO_FREQUENCY"
},
"lf_clock_src": {
"help": "Value: LFXO for external crystal, LFRCO for internal RC oscillator, ULFRCO for internal 1KHz RC oscillator",
"value": "LFXO",
"macro_name": "LOW_ENERGY_CLOCK_SOURCE"
},
"lfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "32768",
"macro_name": "LFXO_FREQUENCY"
},
"hfrco_clock_freq": {
"help": "Value: Frequency in hertz, must correspond to setting of hfrco_band_select",
"value": "21000000",
"macro_name": "HFRCO_FREQUENCY"
},
"hfrco_band_select": {
"help": "Value: One of _CMU_HFRCOCTRL_BAND_28MHZ, _CMU_HFRCOCTRL_BAND_21MHZ, _CMU_HFRCOCTRL_BAND_14MHZ, _CMU_HFRCOCTRL_BAND_11MHZ, _CMU_HFRCOCTRL_BAND_7MHZ, _CMU_HFRCOCTRL_BAND_1MHZ. Be sure to set hfrco_clock_freq accordingly!",
"value": "_CMU_HFRCOCTRL_BAND_21MHZ",
"macro_name": "HFRCO_FREQUENCY_ENUM"
},
"board_controller_enable": {
"help": "Pin to pull high for enabling the USB serial port",
"value": "PF7",
"macro_name": "EFM_BC_EN"
}
}
},
"EFM32ZG222F32": {
"inherits": ["EFM32"],
"extra_labels_add": ["EFM32ZG", "32K", "SL_AES"],
"core": "Cortex-M0+",
"default_toolchain": "uARM",
"macros_add": ["EFM32ZG222F32", "TRANSACTION_QUEUE_SIZE_SPI=0"],
"supported_toolchains": ["GCC_ARM", "uARM", "IAR"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "EFM32ZG222F32",
"public": false
},
"EFM32ZG_STK3200": {
"inherits": ["EFM32ZG222F32"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LPTICKER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES", "USTICKER"],
"forced_reset_timeout": 2,
"config": {
"hf_clock_src": {
"help": "Value: HFXO for external crystal, HFRCO for internal RC oscillator",
"value": "HFXO",
"macro_name": "CORE_CLOCK_SOURCE"
},
"hfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "24000000",
"macro_name": "HFXO_FREQUENCY"
},
"lf_clock_src": {
"help": "Value: LFXO for external crystal, LFRCO for internal RC oscillator, ULFRCO for internal 1KHz RC oscillator",
"value": "LFXO",
"macro_name": "LOW_ENERGY_CLOCK_SOURCE"
},
"lfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "32768",
"macro_name": "LFXO_FREQUENCY"
},
"hfrco_clock_freq": {
"help": "Value: Frequency in hertz, must correspond to setting of hfrco_band_select",
"value": "21000000",
"macro_name": "HFRCO_FREQUENCY"
},
"hfrco_band_select": {
"help": "Value: One of _CMU_HFRCOCTRL_BAND_21MHZ, _CMU_HFRCOCTRL_BAND_14MHZ, _CMU_HFRCOCTRL_BAND_11MHZ, _CMU_HFRCOCTRL_BAND_7MHZ, _CMU_HFRCOCTRL_BAND_1MHZ. Be sure to set hfrco_clock_freq accordingly!",
"value": "_CMU_HFRCOCTRL_BAND_21MHZ",
"macro_name": "HFRCO_FREQUENCY_ENUM"
},
"board_controller_enable": {
"help": "Pin to pull high for enabling the USB serial port",
"value": "PA9",
"macro_name": "EFM_BC_EN"
}
}
},
"EFM32HG322F64": {
"inherits": ["EFM32"],
"extra_labels_add": ["EFM32HG", "64K", "SL_AES"],
"core": "Cortex-M0+",
"default_toolchain": "uARM",
"macros_add": ["EFM32HG322F64", "TRANSACTION_QUEUE_SIZE_SPI=0"],
"supported_toolchains": ["GCC_ARM", "uARM", "IAR"],
"default_lib": "small",
"release_versions": ["2"],
"device_name": "EFM32HG322F64",
"public": false
},
"EFM32HG_STK3400": {
"inherits": ["EFM32HG322F64"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LPTICKER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES", "USTICKER"],
"forced_reset_timeout": 2,
"config": {
"hf_clock_src": {
"help": "Value: HFXO for external crystal, HFRCO for internal RC oscillator",
"value": "HFXO",
"macro_name": "CORE_CLOCK_SOURCE"
},
"hfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "24000000",
"macro_name": "HFXO_FREQUENCY"
},
"lf_clock_src": {
"help": "Value: LFXO for external crystal, LFRCO for internal RC oscillator, ULFRCO for internal 1KHz RC oscillator",
"value": "LFXO",
"macro_name": "LOW_ENERGY_CLOCK_SOURCE"
},
"lfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "32768",
"macro_name": "LFXO_FREQUENCY"
},
"hfrco_clock_freq": {
"help": "Value: Frequency in hertz, must correspond to setting of hfrco_band_select",
"value": "21000000",
"macro_name": "HFRCO_FREQUENCY"
},
"hfrco_band_select": {
"help": "Value: One of _CMU_HFRCOCTRL_BAND_21MHZ, _CMU_HFRCOCTRL_BAND_14MHZ, _CMU_HFRCOCTRL_BAND_11MHZ, _CMU_HFRCOCTRL_BAND_7MHZ, _CMU_HFRCOCTRL_BAND_1MHZ. Be sure to set hfrco_clock_freq accordingly!",
"value": "_CMU_HFRCOCTRL_BAND_21MHZ",
"macro_name": "HFRCO_FREQUENCY_ENUM"
},
"board_controller_enable": {
"help": "Pin to pull high for enabling the USB serial port",
"value": "PA9",
"macro_name": "EFM_BC_EN"
}
}
},
"EFM32PG1B100F256GM32": {
"inherits": ["EFM32"],
"extra_labels_add": ["EFM32PG", "256K", "SL_CRYPTO"],
"core": "Cortex-M4F",
"macros_add": ["EFM32PG1B100F256GM32", "TRANSACTION_QUEUE_SIZE_SPI=4"],
"supported_toolchains": ["GCC_ARM", "ARM", "uARM", "IAR"],
"release_versions": ["2", "5"],
"device_name": "EFM32PG1B100F256GM32",
"public": false,
"bootloader_supported": true
},
"EFM32PG_STK3401": {
"inherits": ["EFM32PG1B100F256GM32"],
"device_has": ["ANALOGIN", "CRC", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LPTICKER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES", "USTICKER", "FLASH"],
"forced_reset_timeout": 2,
"config": {
"hf_clock_src": {
"help": "Value: HFXO for external crystal, HFRCO for internal RC oscillator",
"value": "HFXO",
"macro_name": "CORE_CLOCK_SOURCE"
},
"hfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "40000000",
"macro_name": "HFXO_FREQUENCY"
},
"lf_clock_src": {
"help": "Value: LFXO for external crystal, LFRCO for internal RC oscillator, ULFRCO for internal 1KHz RC oscillator",
"value": "LFXO",
"macro_name": "LOW_ENERGY_CLOCK_SOURCE"
},
"lfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "32768",
"macro_name": "LFXO_FREQUENCY"
},
"hfrco_clock_freq": {
"help": "Value: Frequency in hertz, must correspond to setting of hfrco_band_select",
"value": "32000000",
"macro_name": "HFRCO_FREQUENCY"
},
"hfrco_band_select": {
"help": "Value: One of cmuHFRCOFreq_1M0Hz, cmuHFRCOFreq_2M0Hz, cmuHFRCOFreq_4M0Hz, cmuHFRCOFreq_7M0Hz, cmuHFRCOFreq_13M0Hz, cmuHFRCOFreq_16M0Hz, cmuHFRCOFreq_19M0Hz, cmuHFRCOFreq_26M0Hz, cmuHFRCOFreq_32M0Hz, cmuHFRCOFreq_38M0Hz. Be sure to set hfrco_clock_freq accordingly!",
"value": "cmuHFRCOFreq_32M0Hz",
"macro_name": "HFRCO_FREQUENCY_ENUM"
},
"board_controller_enable": {
"help": "Pin to pull high for enabling the USB serial port",
"value": "PA5",
"macro_name": "EFM_BC_EN"
}
}
},
"EFR32MG1P132F256GM48": {
"inherits": ["EFM32"],
"extra_labels_add": ["EFR32MG1", "EFR32_1", "256K", "SL_RAIL", "SL_CRYPTO"],
"core": "Cortex-M4F",
"macros_add": ["EFR32MG1P132F256GM48", "TRANSACTION_QUEUE_SIZE_SPI=4"],
"supported_toolchains": ["GCC_ARM", "ARM", "uARM", "IAR"],
"release_versions": ["2", "5"],
"device_name": "EFR32MG1P132F256GM48",
"public": false,
"bootloader_supported": true
},
"EFR32MG1P233F256GM48": {
"inherits": ["EFM32"],
"extra_labels_add": ["EFR32MG1", "EFR32_1", "256K", "SL_RAIL", "SL_CRYPTO"],
"core": "Cortex-M4F",
"macros_add": ["EFR32MG1P233F256GM48", "TRANSACTION_QUEUE_SIZE_SPI=4"],
"supported_toolchains": ["GCC_ARM", "ARM", "uARM", "IAR"],
"release_versions": ["2", "5"],
"public": false,
"bootloader_supported": true
},
"EFR32MG1_BRD4150": {
"inherits": ["EFR32MG1P132F256GM48"],
"device_has": ["802_15_4_PHY", "ANALOGIN", "CRC", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LPTICKER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES", "USTICKER", "FLASH"],
"forced_reset_timeout": 2,
"config": {
"hf_clock_src": {
"help": "Value: HFXO for external crystal, HFRCO for internal RC oscillator",
"value": "HFXO",
"macro_name": "CORE_CLOCK_SOURCE"
},
"hfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "38400000",
"macro_name": "HFXO_FREQUENCY"
},
"lf_clock_src": {
"help": "Value: LFXO for external crystal, LFRCO for internal RC oscillator, ULFRCO for internal 1KHz RC oscillator",
"value": "LFXO",
"macro_name": "LOW_ENERGY_CLOCK_SOURCE"
},
"lfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "32768",
"macro_name": "LFXO_FREQUENCY"
},
"hfrco_clock_freq": {
"help": "Value: Frequency in hertz, must correspond to setting of hfrco_band_select",
"value": "32000000",
"macro_name": "HFRCO_FREQUENCY"
},
"hfrco_band_select": {
"help": "Value: One of cmuHFRCOFreq_1M0Hz, cmuHFRCOFreq_2M0Hz, cmuHFRCOFreq_4M0Hz, cmuHFRCOFreq_7M0Hz, cmuHFRCOFreq_13M0Hz, cmuHFRCOFreq_16M0Hz, cmuHFRCOFreq_19M0Hz, cmuHFRCOFreq_26M0Hz, cmuHFRCOFreq_32M0Hz, cmuHFRCOFreq_38M0Hz. Be sure to set hfrco_clock_freq accordingly!",
"value": "cmuHFRCOFreq_32M0Hz",
"macro_name": "HFRCO_FREQUENCY_ENUM"
},
"board_controller_enable": {
"help": "Pin to pull high for enabling the USB serial port",
"value": "PA5",
"macro_name": "EFM_BC_EN"
}
},
"overrides": {
"network-default-interface-type": "MESH"
},
"public": false
},
"TB_SENSE_1": {
"inherits": ["EFR32MG1P233F256GM48"],
"device_has": ["802_15_4_PHY", "ANALOGIN", "CRC", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LPTICKER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES", "USTICKER", "FLASH"],
"forced_reset_timeout": 5,
"config": {
"hf_clock_src": {
"help": "Value: HFXO for external crystal, HFRCO for internal RC oscillator",
"value": "HFXO",
"macro_name": "CORE_CLOCK_SOURCE"
},
"hfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "38400000",
"macro_name": "HFXO_FREQUENCY"
},
"lf_clock_src": {
"help": "Value: LFXO for external crystal, LFRCO for internal RC oscillator, ULFRCO for internal 1KHz RC oscillator",
"value": "LFXO",
"macro_name": "LOW_ENERGY_CLOCK_SOURCE"
},
"lfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "32768",
"macro_name": "LFXO_FREQUENCY"
},
"hfrco_clock_freq": {
"help": "Value: Frequency in hertz, must correspond to setting of hfrco_band_select",
"value": "32000000",
"macro_name": "HFRCO_FREQUENCY"
},
"hfrco_band_select": {
"help": "Value: One of cmuHFRCOFreq_1M0Hz, cmuHFRCOFreq_2M0Hz, cmuHFRCOFreq_4M0Hz, cmuHFRCOFreq_7M0Hz, cmuHFRCOFreq_13M0Hz, cmuHFRCOFreq_16M0Hz, cmuHFRCOFreq_19M0Hz, cmuHFRCOFreq_26M0Hz, cmuHFRCOFreq_32M0Hz, cmuHFRCOFreq_38M0Hz. Be sure to set hfrco_clock_freq accordingly!",
"value": "cmuHFRCOFreq_32M0Hz",
"macro_name": "HFRCO_FREQUENCY_ENUM"
}
},
"overrides": {
"network-default-interface-type": "MESH"
}
},
"EFM32PG12B500F1024GL125": {
"inherits": ["EFM32"],
"extra_labels_add": ["EFM32PG12", "1024K", "SL_CRYPTO"],
"core": "Cortex-M4F",
"macros_add": ["EFM32PG12B500F1024GL125", "TRANSACTION_QUEUE_SIZE_SPI=4"],
"supported_toolchains": ["GCC_ARM", "ARM", "uARM", "IAR"],
"release_versions": ["2", "5"],
"device_name": "EFM32PG12B500F1024GL125",
"public": false,
"bootloader_supported": true
},
"EFM32PG12_STK3402": {
"inherits": ["EFM32PG12B500F1024GL125"],
"device_has": ["ANALOGIN", "CRC", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LPTICKER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES", "USTICKER", "TRNG", "FLASH"],
"forced_reset_timeout": 2,
"config": {
"hf_clock_src": {
"help": "Value: HFXO for external crystal, HFRCO for internal RC oscillator",
"value": "HFXO",
"macro_name": "CORE_CLOCK_SOURCE"
},
"hfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "40000000",
"macro_name": "HFXO_FREQUENCY"
},
"lf_clock_src": {
"help": "Value: LFXO for external crystal, LFRCO for internal RC oscillator, ULFRCO for internal 1KHz RC oscillator",
"value": "LFXO",
"macro_name": "LOW_ENERGY_CLOCK_SOURCE"
},
"lfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "32768",
"macro_name": "LFXO_FREQUENCY"
},
"hfrco_clock_freq": {
"help": "Value: Frequency in hertz, must correspond to setting of hfrco_band_select",
"value": "32000000",
"macro_name": "HFRCO_FREQUENCY"
},
"hfrco_band_select": {
"help": "Value: One of cmuHFRCOFreq_1M0Hz, cmuHFRCOFreq_2M0Hz, cmuHFRCOFreq_4M0Hz, cmuHFRCOFreq_7M0Hz, cmuHFRCOFreq_13M0Hz, cmuHFRCOFreq_16M0Hz, cmuHFRCOFreq_19M0Hz, cmuHFRCOFreq_26M0Hz, cmuHFRCOFreq_32M0Hz, cmuHFRCOFreq_38M0Hz. Be sure to set hfrco_clock_freq accordingly!",
"value": "cmuHFRCOFreq_32M0Hz",
"macro_name": "HFRCO_FREQUENCY_ENUM"
},
"board_controller_enable": {
"help": "Pin to pull high for enabling the USB serial port",
"value": "PA5",
"macro_name": "EFM_BC_EN"
}
}
},
"EFR32MG12P332F1024GL125": {
"inherits": ["EFM32"],
"extra_labels_add": ["EFR32MG12", "EFR32_12", "1024K", "SL_RAIL", "SL_CRYPTO"],
"core": "Cortex-M4F",
"macros_add": ["EFR32MG12P332F1024GL125", "TRANSACTION_QUEUE_SIZE_SPI=4"],
"supported_toolchains": ["GCC_ARM", "ARM", "uARM", "IAR"],
"release_versions": ["2", "5"],
"device_name": "EFR32MG12P332F1024GL125",
"public": false,
"bootloader_supported": true
},
"TB_SENSE_12": {
"inherits": ["EFR32MG12P332F1024GL125"],
"device_name": "EFR32MG12P332F1024GL125",
"device_has": ["802_15_4_PHY", "ANALOGIN", "CRC", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LPTICKER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES", "USTICKER", "TRNG", "FLASH"],
"forced_reset_timeout": 5,
"config": {
"hf_clock_src": {
"help": "Value: HFXO for external crystal, HFRCO for internal RC oscillator",
"value": "HFXO",
"macro_name": "CORE_CLOCK_SOURCE"
},
"hfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "38400000",
"macro_name": "HFXO_FREQUENCY"
},
"lf_clock_src": {
"help": "Value: LFXO for external crystal, LFRCO for internal RC oscillator, ULFRCO for internal 1KHz RC oscillator",
"value": "LFXO",
"macro_name": "LOW_ENERGY_CLOCK_SOURCE"
},
"lfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "32768",
"macro_name": "LFXO_FREQUENCY"
},
"hfrco_clock_freq": {
"help": "Value: Frequency in hertz, must correspond to setting of hfrco_band_select",
"value": "32000000",
"macro_name": "HFRCO_FREQUENCY"
},
"hfrco_band_select": {
"help": "Value: One of cmuHFRCOFreq_1M0Hz, cmuHFRCOFreq_2M0Hz, cmuHFRCOFreq_4M0Hz, cmuHFRCOFreq_7M0Hz, cmuHFRCOFreq_13M0Hz, cmuHFRCOFreq_16M0Hz, cmuHFRCOFreq_19M0Hz, cmuHFRCOFreq_26M0Hz, cmuHFRCOFreq_32M0Hz, cmuHFRCOFreq_38M0Hz. Be sure to set hfrco_clock_freq accordingly!",
"value": "cmuHFRCOFreq_32M0Hz",
"macro_name": "HFRCO_FREQUENCY_ENUM"
}
},
"overrides": {
"network-default-interface-type": "MESH"
}
},
"EFM32GG11B820F2048GL192": {
"inherits": ["EFM32"],
"extra_labels_add": ["EFM32GG11", "2048K", "SL_CRYPTO"],
"core": "Cortex-M4F",
"macros_add": ["EFM32GG11B820F2048GL192", "TRANSACTION_QUEUE_SIZE_SPI=4"],
"supported_toolchains": ["GCC_ARM", "ARM", "uARM", "IAR"],
"release_versions": ["2", "5"],
"device_name": "EFM32GG11B820F2048GL192",
"public": false,
"bootloader_supported": true
},
"EFM32GG11_STK3701": {
"inherits": ["EFM32GG11B820F2048GL192"],
"device_name": "EFM32GG11B820F2048GL192",
"device_has": ["ANALOGIN", "CRC", "EMAC", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LPTICKER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "QSPI", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES", "USTICKER", "TRNG", "FLASH"],
"forced_reset_timeout": 5,
"config": {
"hf_clock_src": {
"help": "Value: HFXO for external crystal, HFRCO for internal RC oscillator",
"value": "HFXO",
"macro_name": "CORE_CLOCK_SOURCE"
},
"hfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "50000000",
"macro_name": "HFXO_FREQUENCY"
},
"lf_clock_src": {
"help": "Value: LFXO for external crystal, LFRCO for internal RC oscillator, ULFRCO for internal 1KHz RC oscillator",
"value": "LFXO",
"macro_name": "LOW_ENERGY_CLOCK_SOURCE"
},
"lfxo_clock_freq": {
"help": "Value: External crystal frequency in hertz",
"value": "32768",
"macro_name": "LFXO_FREQUENCY"
},
"hfrco_clock_freq": {
"help": "Value: Frequency in hertz, must correspond to setting of hfrco_band_select",
"value": "32000000",
"macro_name": "HFRCO_FREQUENCY"
},
"hfrco_band_select": {
"help": "Value: One of cmuHFRCOFreq_1M0Hz, cmuHFRCOFreq_2M0Hz, cmuHFRCOFreq_4M0Hz, cmuHFRCOFreq_7M0Hz, cmuHFRCOFreq_13M0Hz, cmuHFRCOFreq_16M0Hz, cmuHFRCOFreq_19M0Hz, cmuHFRCOFreq_26M0Hz, cmuHFRCOFreq_32M0Hz, cmuHFRCOFreq_38M0Hz. Be sure to set hfrco_clock_freq accordingly!",
"value": "cmuHFRCOFreq_32M0Hz",
"macro_name": "HFRCO_FREQUENCY_ENUM"
},
"board_controller_enable": {
"help": "Pin to pull high for enabling the USB serial port",
"value": "PE1",
"macro_name": "EFM_BC_EN"
},
"qspi_flash_enable": {
"help": "Pin to pull high for enabling the on-board QSPI flash",
"value": "PG13",
"macro_name": "QSPI_FLASH_EN"
}
},
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"WIZWIKI_W7500": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M0",
"extra_labels": ["WIZNET", "W7500x", "WIZwiki_W7500"],
"macros": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"supported_toolchains": ["uARM", "ARM", "GCC_ARM", "IAR"],
"inherits": ["Target"],
"device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"release_versions": ["2", "5"]
},
"WIZWIKI_W7500P": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M0",
"extra_labels": ["WIZNET", "W7500x", "WIZwiki_W7500P"],
"macros": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"supported_toolchains": ["uARM", "ARM", "GCC_ARM", "IAR"],
"inherits": ["Target"],
"device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"release_versions": ["2", "5"]
},
"WIZWIKI_W7500ECO": {
"inherits": ["Target"],
"core": "Cortex-M0",
"extra_labels": ["WIZNET", "W7500x", "WIZwiki_W7500ECO"],
"macros": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"supported_toolchains": ["uARM", "ARM", "GCC_ARM", "IAR"],
"device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"release_versions": ["2", "5"]
},
"SAMR21G18A": {
"inherits": ["Target"],
"core": "Cortex-M0+",
"macros": ["__SAMR21G18A__", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
"extra_labels": ["Atmel", "SAM_CortexM0P", "SAMR21"],
"supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
"release_versions": ["2"],
"device_name": "ATSAMR21G18A"
},
"SAMD21J18A": {
"inherits": ["Target"],
"core": "Cortex-M0+",
"macros": ["__SAMD21J18A__", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
"extra_labels": ["Atmel", "SAM_CortexM0P", "SAMD21"],
"supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
"device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
"release_versions": ["2"],
"device_name": "ATSAMD21J18A"
},
"SAMD21G18A": {
"inherits": ["Target"],
"core": "Cortex-M0+",
"macros": ["__SAMD21G18A__", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
"extra_labels": ["Atmel", "SAM_CortexM0P", "SAMD21"],
"supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
"device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
"release_versions": ["2"],
"device_name": "ATSAMD21G18A"
},
"SAML21J18A": {
"inherits": ["Target"],
"core": "Cortex-M0+",
"macros": ["__SAML21J18A__", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
"extra_labels": ["Atmel", "SAM_CortexM0P", "SAML21"],
"supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
"device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
"device_name": "ATSAML21J18A"
},
"SAMG55J19": {
"inherits": ["Target"],
"core": "Cortex-M4",
"extra_labels": ["Atmel", "SAM_CortexM4", "SAMG55"],
"macros": ["__SAMG55J19__", "BOARD=75", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
"supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
"default_toolchain": "ARM",
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
"default_lib": "std",
"device_name": "ATSAMG55J19"
},
"MCU_NRF51_UNIFIED": {
"inherits": ["Target"],
"core": "Cortex-M0",
"OVERRIDE_BOOTLOADER_FILENAME": "nrf51822_bootloader.hex",
"macros": [
"NRF51",
"TARGET_NRF51822",
"BLE_STACK_SUPPORT_REQD",
"SOFTDEVICE_PRESENT",
"S130",
"TARGET_MCU_NRF51822",
"CMSIS_VECTAB_VIRTUAL",
"CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\"",
"NO_SYSTICK",
"MBED_TICKLESS"
],
"MERGE_BOOTLOADER": false,
"extra_labels": [
"NORDIC",
"MCU_NRF51",
"MCU_NRF51822_UNIFIED",
"NRF5x",
"NRF51",
"SDK_11"
],
"OUTPUT_EXT": "hex",
"is_disk_virtual": true,
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
"public": false,
"MERGE_SOFT_DEVICE": true,
"EXPECTED_SOFTDEVICES_WITH_OFFSETS": [
{
"boot": "",
"name": "s130_nrf51_2.0.0_softdevice.hex",
"offset": 110592
}
],
"detect_code": ["1070"],
"post_binary_hook": {
"function": "MCU_NRF51Code.binary_hook",
"toolchains": ["ARM_STD", "GCC_ARM", "IAR"]
},
"program_cycle_s": 6,
"features": ["BLE"],
"config": {
"lf_clock_src": {
"value": "NRF_LF_SRC_XTAL",
"macro_name": "MBED_CONF_NORDIC_NRF_LF_CLOCK_SRC"
},
"uart_hwfc": {
"help": "Value: 1 for enable, 0 for disable",
"value": 1,
"macro_name": "MBED_CONF_NORDIC_UART_HWFC"
}
},
"device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
},
"MCU_NRF51_16K_UNIFIED_S130": {
"inherits": ["MCU_NRF51_UNIFIED"],
"extra_labels_add": ["MCU_NORDIC_16K", "MCU_NRF51_16K_S130", "MCU_NRF51_16K"],
"macros_add": ["TARGET_MCU_NORDIC_16K", "TARGET_MCU_NRF51_16K_S130", "TARGET_MCU_NRF51_16K"],
"public": false
},
"MCU_NRF51_32K_UNIFIED": {
"inherits": ["MCU_NRF51_UNIFIED"],
"extra_labels_add": ["MCU_NORDIC_32K", "MCU_NRF51_32K"],
"macros_add": ["TARGET_MCU_NORDIC_32K", "TARGET_MCU_NRF51_32K"],
"public": false
},
"NRF51_DK": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_32K_UNIFIED"],
"device_has": ["USTICKER", "LPTICKER", "ANALOGIN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
"release_versions": ["2", "5"],
"device_name": "nRF51822_xxAA"
},
"SDT51822B": {
"inherits": ["MCU_NRF51_32K_UNIFIED"],
"device_has": ["USTICKER", "LPTICKER", "ANALOGIN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
"detect_code": ["3103"],
"release_versions": ["2", "5"],
"device_name": "nRF51822_xxAA"
},
"NRF51_DONGLE": {
"inherits": ["MCU_NRF51_32K_UNIFIED"],
"progen": {"target": "nrf51-dongle"},
"device_has": ["USTICKER", "LPTICKER", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
"release_versions": ["2", "5"]
},
"OSHCHIP": {
"inherits": ["MCU_NRF51_32K_UNIFIED"],
"overrides": {"lf_clock_src": "NRF_LF_SRC_RC"},
"device_has": ["USTICKER", "LPTICKER", "ANALOGIN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
"device_name": "nRF51822_xxAC"
},
"MCU_NRF52832": {
"inherits": ["Target"],
"core": "Cortex-M4F",
"macros": [
"BOARD_PCA10040",
"NRF52",
"TARGET_NRF52832",
"CMSIS_VECTAB_VIRTUAL",
"CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\"",
"MBED_TICKLESS"
],
"device_has": [
"ANALOGIN",
"FLASH",
"I2C",
"I2C_ASYNCH",
"INTERRUPTIN",
"ITM",
"LPTICKER",
"PORTIN",
"PORTINOUT",
"PORTOUT",
"PWMOUT",
"SERIAL",
"SERIAL_ASYNCH",
"SERIAL_FC",
"SLEEP",
"SPI",
"SPI_ASYNCH",
"SYSTICK_CLK_OFF_DURING_SLEEP",
"TRNG",
"USTICKER"
],
"extra_labels": [
"NORDIC",
"NRF5x",
"NRF52",
"SDK_14_2",
"SOFTDEVICE_COMMON",
"SOFTDEVICE_S132_FULL"
],
"config": {
"lf_clock_src": {
"macro_name": "MBED_CONF_NORDIC_NRF_LF_CLOCK_SRC",
"help": "Select Low Frequency clock source. Options: NRF_LF_SRC_XTAL, NRF_LF_SRC_SYNTH, and NRF_LF_SRC_RC",
"value": "NRF_LF_SRC_XTAL"
},
"lf_clock_rc_calib_timer_interval": {
"macro_name": "MBED_CONF_NORDIC_NRF_LF_CLOCK_CALIB_TIMER_INTERVAL",
"value": 16
},
"lf_clock_rc_calib_mode_config": {
"macro_name": "MBED_CONF_NORDIC_NRF_LF_CLOCK_CALIB_MODE_CONFIG",
"value": 0
}
},
"OUTPUT_EXT": "hex",
"is_disk_virtual": true,
"supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
"public": false,
"detect_code": ["1101"],
"program_cycle_s": 6,
"bootloader_supported": true
},
"NRF52_DK": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF52832"],
"release_versions": ["5"],
"device_name": "nRF52832_xxAA"
},
"SDT52832B": {
"inherits": ["MCU_NRF52832"],
"release_versions": ["5"],
"detect_code": ["3104"],
"device_name": "nRF52832_xxAA"
},
"UBLOX_EVA_NINA": {
"inherits": ["MCU_NRF52832"],
"release_versions": ["5"],
"device_name": "nRF52832_xxAA"
},
"UBLOX_EVK_NINA_B1": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF52832"],
"release_versions": ["5"],
"device_name": "nRF52832_xxAA"
},
"MTB_UBLOX_NINA_B1": {
"inherits": ["MCU_NRF52832"],
"release_versions": ["5"],
"device_name": "nRF52832_xxAA"
},
"MTB_LAIRD_BL652": {
"inherits": ["MCU_NRF52832"],
"release_versions": ["5"],
"device_name": "nRF52832_xxAA"
},
"DELTA_DFBM_NQ620": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF52832"],
"release_versions": ["5"],
"device_name": "nRF52832_xxAA"
},
"MCU_NRF52840": {
"inherits": ["Target"],
"core": "Cortex-M4F",
"macros": [
"BOARD_PCA10056",
"NRF52840_XXAA",
"TARGET_NRF52840",
"CMSIS_VECTAB_VIRTUAL",
"CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\"",
"MBED_TICKLESS",
"MBEDTLS_CONFIG_HW_SUPPORT"
],
"features": ["CRYPTOCELL310"],
"device_has": [
"ANALOGIN",
"FLASH",
"I2C",
"I2C_ASYNCH",
"INTERRUPTIN",
"ITM",
"LPTICKER",
"PORTIN",
"PORTINOUT",
"PORTOUT",
"PWMOUT",
"SERIAL",
"SERIAL_ASYNCH",
"SERIAL_FC",
"SLEEP",
"SPI",
"SPI_ASYNCH",
"SYSTICK_CLK_OFF_DURING_SLEEP",
"TRNG",
"USTICKER",
"QSPI"
],
"extra_labels": [
"NORDIC",
"NRF5x",
"NRF52",
"SDK_14_2",
"SOFTDEVICE_COMMON",
"SOFTDEVICE_S140_FULL"
],
"config": {
"lf_clock_src": {
"macro_name": "MBED_CONF_NORDIC_NRF_LF_CLOCK_SRC",
"help": "Select Low Frequency clock source. Options: NRF_LF_SRC_XTAL, NRF_LF_SRC_SYNTH, and NRF_LF_SRC_RC",
"value": "NRF_LF_SRC_XTAL"
},
"lf_clock_rc_calib_timer_interval": {
"macro_name": "MBED_CONF_NORDIC_NRF_LF_CLOCK_CALIB_TIMER_INTERVAL",
"value": 16
},
"lf_clock_rc_calib_mode_config": {
"macro_name": "MBED_CONF_NORDIC_NRF_LF_CLOCK_CALIB_MODE_CONFIG",
"value": 0
}
},
"OUTPUT_EXT": "hex",
"is_disk_virtual": true,
"supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
"public": false,
"detect_code": ["1101"],
"program_cycle_s": 6,
"bootloader_supported": true
},
"NRF52840_DK": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF52840"],
"release_versions": ["5"],
"device_name": "nRF52840_xxAA"
},
"BLUEPILL_F103C8": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M3",
"default_toolchain": "GCC_ARM",
"extra_labels_add": ["STM32F1", "STM32F103C8"],
"supported_toolchains": ["GCC_ARM"],
"device_has_add": ["CAN", "SERIAL_FC", "SERIAL_ASYNCH", "FLASH"],
"device_has_remove": ["STDIO_MESSAGES", "LPTICKER"]
},
"NUMAKER_PFM_NUC472": {
"core": "Cortex-M4F",
"default_toolchain": "ARM",
"extra_labels": ["NUVOTON", "NUC472", "NU_XRAM_SUPPORTED", "FLASH_CMSIS_ALGO", "NUVOTON_EMAC"],
"is_disk_virtual": true,
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
"config": {
"gpio-irq-debounce-enable": {
"help": "Enable GPIO IRQ debounce",
"value": 0
},
"gpio-irq-debounce-enable-list": {
"help": "Comma separated pin list to enable GPIO IRQ debounce",
"value": "NC"
},
"gpio-irq-debounce-clock-source": {
"help": "Select GPIO IRQ debounce clock source: GPIO_DBCTL_DBCLKSRC_HCLK or GPIO_DBCTL_DBCLKSRC_IRC10K",
"value": "GPIO_DBCTL_DBCLKSRC_IRC10K"
},
"gpio-irq-debounce-sample-rate": {
"help": "Select GPIO IRQ debounce sample rate: GPIO_DBCTL_DBCLKSEL_1, GPIO_DBCTL_DBCLKSEL_2, GPIO_DBCTL_DBCLKSEL_4, ..., or GPIO_DBCTL_DBCLKSEL_32768",
"value": "GPIO_DBCTL_DBCLKSEL_16"
}
},
"inherits": ["Target"],
"macros_add": ["MBEDTLS_CONFIG_HW_SUPPORT", "LPTICKER_DELAY_TICKS=3"],
"device_has": ["USTICKER", "LPTICKER", "RTC", "ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "STDIO_MESSAGES", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "TRNG", "CAN", "FLASH", "EMAC"],
"release_versions": ["5"],
"device_name": "NUC472HI8AE",
"bootloader_supported": true,
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"NCS36510": {
"inherits": ["Target"],
"core": "Cortex-M3",
"extra_labels": ["ONSEMI"],
"config": {
"mac-addr-low": {
"help": "Lower 32 bits of the MAC extended address. All FFs indicates that factory programmed MAC address shall be used. In order to override the factory programmed MAC address this value needs to be changed from 0xFFFFFFFF to any chosen value.",
"value": "0xFFFFFFFF"
},
"mac-addr-high": {
"help": "Higher 32 bits of the MAC extended address. All FFs indicates that factory programmed MAC address shall be used. In order to override the factory programmed MAC address this value needs to be changed from 0xFFFFFFFF to any chosen value.",
"value": "0xFFFFFFFF"
},
"32KHz-clk-trim": {
"help": "32KHz clock trim",
"value": "0x39"
},
"32MHz-clk-trim": {
"help": "32MHz clock trim",
"value": "0x17"
},
"rssi-trim": {
"help": "RSSI trim",
"value": "0x3D"
},
"txtune-trim": {
"help": "TX tune trim",
"value": "0xFFFFFFFF"
}
},
"OUTPUT_EXT": "hex",
"post_binary_hook": {"function": "NCS36510TargetCode.ncs36510_addfib"},
"macros": ["CM3", "CPU_NCS36510", "TARGET_NCS36510", "LOAD_ADDRESS=0x3000"],
"supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
"device_has": ["ANALOGIN", "SERIAL", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "TRNG", "SPISLAVE", "802_15_4_PHY"],
"release_versions": ["2", "5"]
},
"NUMAKER_PFM_M453": {
"core": "Cortex-M4F",
"default_toolchain": "ARM",
"extra_labels": ["NUVOTON", "M451", "NUMAKER_PFM_M453", "FLASH_CMSIS_ALGO"],
"is_disk_virtual": true,
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
"config": {
"gpio-irq-debounce-enable": {
"help": "Enable GPIO IRQ debounce",
"value": 0
},
"gpio-irq-debounce-enable-list": {
"help": "Comma separated pin list to enable GPIO IRQ debounce",
"value": "NC"
},
"gpio-irq-debounce-clock-source": {
"help": "Select GPIO IRQ debounce clock source: GPIO_DBCTL_DBCLKSRC_HCLK or GPIO_DBCTL_DBCLKSRC_LIRC",
"value": "GPIO_DBCTL_DBCLKSRC_LIRC"
},
"gpio-irq-debounce-sample-rate": {
"help": "Select GPIO IRQ debounce sample rate: GPIO_DBCTL_DBCLKSEL_1, GPIO_DBCTL_DBCLKSEL_2, GPIO_DBCTL_DBCLKSEL_4, ..., or GPIO_DBCTL_DBCLKSEL_32768",
"value": "GPIO_DBCTL_DBCLKSEL_16"
}
},
"inherits": ["Target"],
"macros_add": ["LPTICKER_DELAY_TICKS=3"],
"progen": {"target": "numaker-pfm-m453"},
"device_has": ["USTICKER", "LPTICKER", "RTC", "ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "STDIO_MESSAGES", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "CAN", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "M453VG6AE",
"bootloader_supported": true
},
"NUMAKER_PFM_NANO130": {
"core": "Cortex-M0",
"default_toolchain": "ARM",
"extra_labels": ["NUVOTON", "NANO100", "NANO130KE3BN"],
"is_disk_virtual": true,
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
"config": {
"gpio-irq-debounce-enable": {
"help": "Enable GPIO IRQ debounce",
"value": 0
},
"gpio-irq-debounce-enable-list": {
"help": "Comma separated pin list to enable GPIO IRQ debounce",
"value": "NC"
},
"gpio-irq-debounce-clock-source": {
"help": "Select GPIO IRQ debounce clock source: GPIO_DBCLKSRC_HCLK or GPIO_DBCLKSRC_IRC10K",
"value": "GPIO_DBCLKSRC_IRC10K"
},
"gpio-irq-debounce-sample-rate": {
"help": "Select GPIO IRQ debounce sample rate: GPIO_DBCLKSEL_1, GPIO_DBCLKSEL_2, GPIO_DBCLKSEL_4, ..., or GPIO_DBCLKSEL_32768",
"value": "GPIO_DBCLKSEL_16"
},
"clock-pll": {
"help": "Choose clock source to clock PLL: NU_HXT_PLL or NU_HIRC_PLL",
"macro_name": "NU_CLOCK_PLL",
"value": "NU_HIRC_PLL"
}
},
"inherits": ["Target"],
"macros": ["CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\"","MBED_FAULT_HANDLER_DISABLED", "LPTICKER_DELAY_TICKS=3"],
"device_has": ["USTICKER", "LPTICKER", "RTC", "ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "STDIO_MESSAGES", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
"release_versions": ["5"],
"device_name": "NANO130KE3BN"
},
"HI2110": {
"inherits": ["Target"],
"core": "Cortex-M0",
"default_toolchain": "GCC_ARM",
"supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
"extra_labels": ["ublox"],
"macros": ["TARGET_PROCESSOR_FAMILY_BOUDICA", "BOUDICA_SARA", "NDEBUG=1", "CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"public": false,
"target_overrides": {
"*": {
"core.stdio-flush-at-exit": false
}
},
"device_has": ["INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SLEEP", "STDIO_MESSAGES"],
"default_lib": "std",
"release_versions": []
},
"SARA_NBIOT": {
"inherits": ["HI2110"],
"extra_labels": ["ublox", "HI2110"],
"public": false
},
"SARA_NBIOT_EVK": {
"inherits": ["SARA_NBIOT"],
"extra_labels": ["ublox", "HI2110", "SARA_NBIOT"]
},
"MCU_RTL8195A": {
"core": "Cortex-M3",
"default_toolchain": "GCC_ARM",
"macros": ["__RTL8195A__","CONFIG_PLATFORM_8195A","CONFIG_MBED_ENABLED","PLATFORM_CMSIS_RTOS","MBED_FAULT_HANDLER_DISABLED"],
"inherits": ["Target"],
"extra_labels": ["Realtek", "AMEBA", "RTW_EMAC"],
"device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SPI", "TRNG", "FLASH"],
"public": false,
"supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
"post_binary_hook": {
"function": "RTL8195ACode.binary_hook",
"toolchains": ["ARM_STD", "GCC_ARM", "IAR"]
},
"release_versions": ["5"],
"overrides": {
"network-default-interface-type": "WIFI"
}
},
"REALTEK_RTL8195AM": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_RTL8195A"],
"detect_code": ["4600"],
"extra_labels_add": ["RTL8195A"]
},
"VBLUNO51_LEGACY": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_32K"],
"detect_code": ["C006"],
"overrides": {"uart_hwfc": 0},
"extra_labels_add": ["VBLUNO51"]
},
"VBLUNO51_BOOT": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_32K_BOOT"],
"detect_code": ["C006"],
"overrides": {"uart_hwfc": 0},
"extra_labels_add": ["VBLUNO51"],
"macros_add": ["TARGET_VBLUNO51"]
},
"VBLUNO51_OTA": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_32K_OTA"],
"detect_code": ["C006"],
"overrides": {"uart_hwfc": 0},
"extra_labels_add": ["VBLUNO51"],
"macros_add": ["TARGET_VBLUNO51"]
},
"VBLUNO51": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_32K_UNIFIED"],
"detect_code": ["C006"],
"overrides": {"uart_hwfc": 0},
"device_has": ["USTICKER", "LPTICKER", "ANALOGIN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
"release_versions": ["2"],
"device_name": "nRF51822_xxAC"
},
"DISCO_L496AG": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32L4", "STM32L496AG", "STM32L496xG"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"detect_code": ["0822"],
"device_has_add": ["ANALOGOUT", "CAN", "CRC", "SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32L496AG"
},
"NUCLEO_L496ZG": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32L4", "STM32L496ZG", "STM32L496xG"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"detect_code": ["0823"],
"device_has_add": ["ANALOGOUT", "CAN", "CRC", "SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32L496ZG"
},
"NUCLEO_L496ZG_P": {
"inherits": ["NUCLEO_L496ZG"],
"detect_code": ["0828"]
},
"NUCLEO_L4R5ZI": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32L4", "STM32L4R5ZI", "STM32L4R5xI"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
},
"lpticker_lptim": {
"help": "This target supports LPTIM. Set value 1 to use LPTIM for LPTICKER, or 0 to use RTC wakeup timer",
"value": 1
}
},
"detect_code": ["0776"],
"device_has_add": ["ANALOGOUT", "CAN", "CRC", "SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32L4R5ZI",
"bootloader_supported": true
},
"VBLUNO52": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF52832"],
"release_versions": ["5"],
"device_name": "nRF52832_xxAA"
},
"MCU_M480": {
"core": "Cortex-M4F",
"default_toolchain": "ARM",
"public": false,
"extra_labels": ["NUVOTON", "M480", "FLASH_CMSIS_ALGO","NUVOTON_EMAC"],
"is_disk_virtual": true,
"supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
"config": {
"gpio-irq-debounce-enable": {
"help": "Enable GPIO IRQ debounce",
"value": 0
},
"gpio-irq-debounce-enable-list": {
"help": "Comma separated pin list to enable GPIO IRQ debounce",
"value": "NC"
},
"gpio-irq-debounce-clock-source": {
"help": "Select GPIO IRQ debounce clock source: GPIO_DBCTL_DBCLKSRC_HCLK or GPIO_DBCTL_DBCLKSRC_LIRC",
"value": "GPIO_DBCTL_DBCLKSRC_LIRC"
},
"gpio-irq-debounce-sample-rate": {
"help": "Select GPIO IRQ debounce sample rate: GPIO_DBCTL_DBCLKSEL_1, GPIO_DBCTL_DBCLKSEL_2, GPIO_DBCTL_DBCLKSEL_4, ..., or GPIO_DBCTL_DBCLKSEL_32768",
"value": "GPIO_DBCTL_DBCLKSEL_16"
},
"usb-device-hsusbd": {
"help": "Select high-speed USB device or not",
"value": 1
},
"ctrl01-enable": {
"help": "Enable control_01",
"value": 0
}
},
"inherits": ["Target"],
"macros_add": ["MBEDTLS_CONFIG_HW_SUPPORT", "LPTICKER_DELAY_TICKS=3"],
"device_has": ["USTICKER", "LPTICKER", "RTC", "ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "STDIO_MESSAGES", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "TRNG", "FLASH", "CAN", "EMAC"],
"release_versions": ["5"],
"bootloader_supported": true,
"overrides": {
"network-default-interface-type": "ETHERNET"
}
},
"NUMAKER_PFM_M487": {
"inherits": ["MCU_M480"],
"device_name": "M487JIDAE"
},
"NUMAKER_IOT_M487": {
"inherits": ["MCU_M480"],
"device_name": "M487JIDAE"
},
"TMPM066": {
"inherits": ["Target"],
"core": "Cortex-M0",
"is_disk_virtual": true,
"extra_labels": ["TOSHIBA"],
"macros": ["__TMPM066__", "CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
"supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
"device_has": ["USTICKER", "ANALOGIN", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SLEEP", "I2C", "I2CSLAVE", "STDIO_MESSAGES", "PWMOUT"],
"device_name": "TMPM066FWUG",
"detect_code": ["7011"],
"release_versions": ["5"]
},
"SAKURAIO_EVB_01": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": [],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F411xE", "STM32F411RE"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
}
},
"device_has_add": ["SERIAL_ASYNCH", "SERIAL_FC", "FLASH"],
"release_versions": ["2"],
"device_name": "STM32F411RE"
},
"TMPM46B": {
"inherits": ["Target"],
"core": "Cortex-M4",
"is_disk_virtual": true,
"extra_labels": ["TOSHIBA"],
"macros": ["__TMPM46B__"],
"supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
"device_has": ["ANALOGIN", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_FC", "SPI", "I2C", "STDIO_MESSAGES", "TRNG", "FLASH", "SLEEP"],
"device_name": "TMPM46BF10FG",
"detect_code": ["7013"],
"release_versions": ["5"],
"bootloader_supported": true
},
"ARM_FM": {
"inherits": ["Target"],
"public": false,
"macros": ["__ARM_FM"],
"extra_labels": ["ARM_FM"]
},
"FVP_MPS2": {
"inherits": ["ARM_FM"],
"public": false,
"supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
"OUTPUT_EXT": "elf",
"device_has": ["AACI", "ANALOGIN", "CLCD", "FLASH", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC", "USTICKER"],
"release_versions": ["5"]
},
"FVP_MPS2_M0": {
"inherits": ["FVP_MPS2"],
"core": "Cortex-M0",
"macros_add": ["CMSDK_CM0"]
},
"FVP_MPS2_M0P": {
"inherits": ["FVP_MPS2"],
"core": "Cortex-M0+",
"macros_add": ["CMSDK_CM0plus"]
},
"FVP_MPS2_M3": {
"inherits": ["FVP_MPS2"],
"core": "Cortex-M3",
"macros_add": ["CMSDK_CM3"]
},
"FVP_MPS2_M4": {
"inherits": ["FVP_MPS2"],
"core": "Cortex-M4",
"macros_add": ["CMSDK_CM4"]
},
"FVP_MPS2_M7": {
"inherits": ["FVP_MPS2"],
"core": "Cortex-M7",
"macros_add": ["CMSDK_CM7"]
},
"NUMAKER_PFM_M2351": {
"core": "Cortex-M23-NS",
"default_toolchain": "ARMC6",
"extra_labels": ["NUVOTON", "M2351", "M2351KIAAEES", "FLASH_CMSIS_ALGO"],
"OUTPUT_EXT": "hex",
"macros": ["MBED_FAULT_HANDLER_DISABLED", "MBED_TZ_DEFAULT_ACCESS=1", "LPTICKER_DELAY_TICKS=3"],
"is_disk_virtual": true,
"supported_toolchains": ["ARMC6"],
"config": {
"gpio-irq-debounce-enable": {
"help": "Enable GPIO IRQ debounce",
"value": 0
},
"gpio-irq-debounce-enable-list": {
"help": "Comma separated pin list to enable GPIO IRQ debounce",
"value": "NC"
},
"gpio-irq-debounce-clock-source": {
"help": "Select GPIO IRQ debounce clock source: GPIO_DBCTL_DBCLKSRC_HCLK or GPIO_DBCTL_DBCLKSRC_LIRC",
"value": "GPIO_DBCTL_DBCLKSRC_LIRC"
},
"gpio-irq-debounce-sample-rate": {
"help": "Select GPIO IRQ debounce sample rate: GPIO_DBCTL_DBCLKSEL_1, GPIO_DBCTL_DBCLKSEL_2, GPIO_DBCTL_DBCLKSEL_4, ..., or GPIO_DBCTL_DBCLKSEL_32768",
"value": "GPIO_DBCTL_DBCLKSEL_16"
}
},
"mbed_rom_start": "0x10040000",
"mbed_rom_size": "0x40000",
"mbed_ram_start": "0x30008000",
"mbed_ram_size": "0x10000",
"inherits": ["Target"],
"device_has": ["USTICKER", "LPTICKER", "RTC", "ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "STDIO_MESSAGES", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "TRNG", "FLASH"],
"detect_code": ["1305"],
"release_versions": ["5"],
"device_name": "M2351KIAAEES",
"bootloader_supported": true
},
"TMPM3H6": {
"inherits": ["Target"],
"core": "Cortex-M3",
"is_disk_virtual": true,
"extra_labels": ["TOSHIBA"],
"macros": ["__TMPM3H6__"],
"supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
"device_has": ["USTICKER", "ANALOGIN", "ANALOGOUT", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "I2C", "I2CSLAVE", "STDIO_MESSAGES"],
"device_name": "TMPM3H6FWFG",
"detect_code": ["7012"],
"release_versions": ["5"]
}
}