![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
Diff: mbed-os/cmsis/TARGET_CORTEX_A/irq_ctrl_gic.c
- Revision:
- 0:8fdf9a60065b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-os/cmsis/TARGET_CORTEX_A/irq_ctrl_gic.c Wed Oct 10 00:33:53 2018 +0000 @@ -0,0 +1,410 @@ +/**************************************************************************//** + * @file irq_ctrl_gic.c + * @brief Interrupt controller handling implementation for GIC + * @version V1.0.1 + * @date 9. April 2018 + ******************************************************************************/ +/* + * Copyright (c) 2017 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include <stddef.h> + +#include "RTE_Components.h" +#include CMSIS_device_header + +#include "irq_ctrl.h" + +#if defined(__GIC_PRESENT) && (__GIC_PRESENT == 1U) + +/// Number of implemented interrupt lines +#ifndef IRQ_GIC_LINE_COUNT +#define IRQ_GIC_LINE_COUNT (1020U) +#endif + +static IRQHandler_t IRQTable[IRQ_GIC_LINE_COUNT] = { 0U }; +static uint32_t IRQ_ID0; + +/// Initialize interrupt controller. +__WEAK int32_t IRQ_Initialize (void) { + uint32_t i; + + for (i = 0U; i < IRQ_GIC_LINE_COUNT; i++) { + IRQTable[i] = (IRQHandler_t)NULL; + } + GIC_Enable(); + return (0); +} + + +/// Register interrupt handler. +__WEAK int32_t IRQ_SetHandler (IRQn_ID_t irqn, IRQHandler_t handler) { + int32_t status; + + if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) { + IRQTable[irqn] = handler; + status = 0; + } else { + status = -1; + } + + return (status); +} + + +/// Get the registered interrupt handler. +__WEAK IRQHandler_t IRQ_GetHandler (IRQn_ID_t irqn) { + IRQHandler_t h; + + // Ignore CPUID field (software generated interrupts) + irqn &= 0x3FFU; + + if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) { + h = IRQTable[irqn]; + } else { + h = (IRQHandler_t)0; + } + + return (h); +} + + +/// Enable interrupt. +__WEAK int32_t IRQ_Enable (IRQn_ID_t irqn) { + int32_t status; + + if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) { + GIC_EnableIRQ ((IRQn_Type)irqn); + status = 0; + } else { + status = -1; + } + + return (status); +} + + +/// Disable interrupt. +__WEAK int32_t IRQ_Disable (IRQn_ID_t irqn) { + int32_t status; + + if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) { + GIC_DisableIRQ ((IRQn_Type)irqn); + status = 0; + } else { + status = -1; + } + + return (status); +} + + +/// Get interrupt enable state. +__WEAK uint32_t IRQ_GetEnableState (IRQn_ID_t irqn) { + uint32_t enable; + + if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) { + enable = GIC_GetEnableIRQ((IRQn_Type)irqn); + } else { + enable = 0U; + } + + return (enable); +} + + +/// Configure interrupt request mode. +__WEAK int32_t IRQ_SetMode (IRQn_ID_t irqn, uint32_t mode) { + uint32_t val; + uint8_t cfg; + uint8_t secure; + uint8_t cpu; + int32_t status = 0; + + if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) { + // Check triggering mode + val = (mode & IRQ_MODE_TRIG_Msk); + + if (val == IRQ_MODE_TRIG_LEVEL) { + cfg = 0x00U; + } else if (val == IRQ_MODE_TRIG_EDGE) { + cfg = 0x02U; + } else { + cfg = 0x00U; + status = -1; + } + + // Check interrupt type + val = mode & IRQ_MODE_TYPE_Msk; + + if (val != IRQ_MODE_TYPE_IRQ) { + status = -1; + } + + // Check interrupt domain + val = mode & IRQ_MODE_DOMAIN_Msk; + + if (val == IRQ_MODE_DOMAIN_NONSECURE) { + secure = 0U; + } else { + // Check security extensions support + val = GIC_DistributorInfo() & (1UL << 10U); + + if (val != 0U) { + // Security extensions are supported + secure = 1U; + } else { + secure = 0U; + status = -1; + } + } + + // Check interrupt CPU targets + val = mode & IRQ_MODE_CPU_Msk; + + if (val == IRQ_MODE_CPU_ALL) { + cpu = 0xFFU; + } else { + cpu = val >> IRQ_MODE_CPU_Pos; + } + + // Apply configuration if no mode error + if (status == 0) { + GIC_SetConfiguration((IRQn_Type)irqn, cfg); + GIC_SetTarget ((IRQn_Type)irqn, cpu); + + if (secure != 0U) { + GIC_SetGroup ((IRQn_Type)irqn, secure); + } + } + } + + return (status); +} + + +/// Get interrupt mode configuration. +__WEAK uint32_t IRQ_GetMode (IRQn_ID_t irqn) { + uint32_t mode; + uint32_t val; + + if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) { + mode = IRQ_MODE_TYPE_IRQ; + + // Get trigger mode + val = GIC_GetConfiguration((IRQn_Type)irqn); + + if ((val & 2U) != 0U) { + // Corresponding interrupt is edge triggered + mode |= IRQ_MODE_TRIG_EDGE; + } else { + // Corresponding interrupt is level triggered + mode |= IRQ_MODE_TRIG_LEVEL; + } + + // Get interrupt CPU targets + mode |= GIC_GetTarget ((IRQn_Type)irqn) << IRQ_MODE_CPU_Pos; + + } else { + mode = IRQ_MODE_ERROR; + } + + return (mode); +} + + +/// Get ID number of current interrupt request (IRQ). +__WEAK IRQn_ID_t IRQ_GetActiveIRQ (void) { + IRQn_ID_t irqn; + uint32_t prio; + + /* Dummy read to avoid GIC 390 errata 801120 */ + GIC_GetHighPendingIRQ(); + + irqn = GIC_AcknowledgePending(); + + __DSB(); + + /* Workaround GIC 390 errata 733075 (GIC-390_Errata_Notice_v6.pdf, 09-Jul-2014) */ + /* The following workaround code is for a single-core system. It would be */ + /* different in a multi-core system. */ + /* If the ID is 0 or 0x3FE or 0x3FF, then the GIC CPU interface may be locked-up */ + /* so unlock it, otherwise service the interrupt as normal. */ + /* Special IDs 1020=0x3FC and 1021=0x3FD are reserved values in GICv1 and GICv2 */ + /* so will not occur here. */ + + if ((irqn == 0) || (irqn >= 0x3FE)) { + /* Unlock the CPU interface with a dummy write to Interrupt Priority Register */ + prio = GIC_GetPriority((IRQn_Type)0); + GIC_SetPriority ((IRQn_Type)0, prio); + + __DSB(); + + if ((irqn == 0U) && ((GIC_GetIRQStatus ((IRQn_Type)irqn) & 1U) != 0U) && (IRQ_ID0 == 0U)) { + /* If the ID is 0, is active and has not been seen before */ + IRQ_ID0 = 1U; + } + /* End of Workaround GIC 390 errata 733075 */ + } + + return (irqn); +} + + +/// Get ID number of current fast interrupt request (FIQ). +__WEAK IRQn_ID_t IRQ_GetActiveFIQ (void) { + return ((IRQn_ID_t)-1); +} + + +/// Signal end of interrupt processing. +__WEAK int32_t IRQ_EndOfInterrupt (IRQn_ID_t irqn) { + int32_t status; + IRQn_Type irq = (IRQn_Type)irqn; + + irqn &= 0x3FFU; + + if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) { + GIC_EndInterrupt (irq); + + if (irqn == 0) { + IRQ_ID0 = 0U; + } + + status = 0; + } else { + status = -1; + } + + return (status); +} + + +/// Set interrupt pending flag. +__WEAK int32_t IRQ_SetPending (IRQn_ID_t irqn) { + int32_t status; + + if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) { + GIC_SetPendingIRQ ((IRQn_Type)irqn); + status = 0; + } else { + status = -1; + } + + return (status); +} + +/// Get interrupt pending flag. +__WEAK uint32_t IRQ_GetPending (IRQn_ID_t irqn) { + uint32_t pending; + + if ((irqn >= 16) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) { + pending = GIC_GetPendingIRQ ((IRQn_Type)irqn); + } else { + pending = 0U; + } + + return (pending & 1U); +} + + +/// Clear interrupt pending flag. +__WEAK int32_t IRQ_ClearPending (IRQn_ID_t irqn) { + int32_t status; + + if ((irqn >= 16) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) { + GIC_ClearPendingIRQ ((IRQn_Type)irqn); + status = 0; + } else { + status = -1; + } + + return (status); +} + + +/// Set interrupt priority value. +__WEAK int32_t IRQ_SetPriority (IRQn_ID_t irqn, uint32_t priority) { + int32_t status; + + if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) { + GIC_SetPriority ((IRQn_Type)irqn, priority); + status = 0; + } else { + status = -1; + } + + return (status); +} + + +/// Get interrupt priority. +__WEAK uint32_t IRQ_GetPriority (IRQn_ID_t irqn) { + uint32_t priority; + + if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) { + priority = GIC_GetPriority ((IRQn_Type)irqn); + } else { + priority = IRQ_PRIORITY_ERROR; + } + + return (priority); +} + + +/// Set priority masking threshold. +__WEAK int32_t IRQ_SetPriorityMask (uint32_t priority) { + GIC_SetInterfacePriorityMask (priority); + return (0); +} + + +/// Get priority masking threshold +__WEAK uint32_t IRQ_GetPriorityMask (void) { + return GIC_GetInterfacePriorityMask(); +} + + +/// Set priority grouping field split point +__WEAK int32_t IRQ_SetPriorityGroupBits (uint32_t bits) { + int32_t status; + + if (bits == IRQ_PRIORITY_Msk) { + bits = 7U; + } + + if (bits < 8U) { + GIC_SetBinaryPoint (7U - bits); + status = 0; + } else { + status = -1; + } + + return (status); +} + + +/// Get priority grouping field split point +__WEAK uint32_t IRQ_GetPriorityGroupBits (void) { + uint32_t bp; + + bp = GIC_GetBinaryPoint() & 0x07U; + + return (7U - bp); +} + +#endif