![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
Diff: mbed-os/targets/TARGET_Freescale/TARGET_K20XX/clk_freqs.h
- Revision:
- 0:8fdf9a60065b
diff -r 000000000000 -r 8fdf9a60065b mbed-os/targets/TARGET_Freescale/TARGET_K20XX/clk_freqs.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-os/targets/TARGET_Freescale/TARGET_K20XX/clk_freqs.h Wed Oct 10 00:33:53 2018 +0000 @@ -0,0 +1,115 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2015 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef CLK_FREQS_H +#define CLK_FREQS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/*! + * \brief Get the peripheral bus clock frequency + * \return Bus frequency + */ +static inline uint32_t bus_frequency(void) { + return SystemCoreClock / (((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV2_MASK) >> SIM_CLKDIV1_OUTDIV2_SHIFT) + 1); +} + +/*! + * \brief Get external oscillator (crystal) frequency + * \return External osc frequency + */ +static uint32_t extosc_frequency(void) { + uint32_t MCGClock = SystemCoreClock * (1u + ((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV1_MASK) >> SIM_CLKDIV1_OUTDIV1_SHIFT)); + + if ((MCG->C1 & MCG_C1_CLKS_MASK) == MCG_C1_CLKS(2)) //MCG clock = external reference clock + return MCGClock; + + if ((MCG->C1 & MCG_C1_CLKS_MASK) == MCG_C1_CLKS(0)) { //PLL/FLL is selected + uint32_t divider, multiplier; + if ((MCG->C6 & MCG_C6_PLLS_MASK) == 0x0u) { //FLL is selected + if ((MCG->S & MCG_S_IREFST_MASK) == 0x0u) { //FLL uses external reference + divider = (uint8_t)(1u << ((MCG->C1 & MCG_C1_FRDIV_MASK) >> MCG_C1_FRDIV_SHIFT)); + if ((MCG->C2 & MCG_C2_RANGE0_MASK) != 0x0u) + divider <<= 5u; + /* Select correct multiplier to calculate the MCG output clock */ + switch (MCG->C4 & (MCG_C4_DMX32_MASK | MCG_C4_DRST_DRS_MASK)) { + case 0x0u: + multiplier = 640u; + break; + case 0x20u: + multiplier = 1280u; + break; + case 0x40u: + multiplier = 1920u; + break; + case 0x60u: + multiplier = 2560u; + break; + case 0x80u: + multiplier = 732u; + break; + case 0xA0u: + multiplier = 1464u; + break; + case 0xC0u: + multiplier = 2197u; + break; + case 0xE0u: + default: + multiplier = 2929u; + break; + } + + return MCGClock * divider / multiplier; + } + } else { //PLL is selected + divider = (1u + (MCG->C5 & MCG_C5_PRDIV0_MASK)); + multiplier = ((MCG->C6 & MCG_C6_VDIV0_MASK) + 24u); + return MCGClock * divider / multiplier; + } + } + + //In all other cases either there is no crystal or we cannot determine it + //For example when the FLL is running on the internal reference, and there is also an + //external crystal. However these are unlikely situations + return 0; +} + +//Get MCG PLL/2 or FLL frequency, depending on which one is active, sets PLLFLLSEL bit +static uint32_t mcgpllfll_frequency(void) { + if ((MCG->C1 & MCG_C1_CLKS_MASK) != MCG_C1_CLKS(0)) //PLL/FLL is not selected + return 0; + + uint32_t MCGClock = SystemCoreClock * (1u + ((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV1_MASK) >> SIM_CLKDIV1_OUTDIV1_SHIFT)); + if ((MCG->C6 & MCG_C6_PLLS_MASK) == 0x0u) { //FLL is selected + SIM->SOPT2 &= ~SIM_SOPT2_PLLFLLSEL_MASK; //MCG peripheral clock is FLL output + return MCGClock; + } else { //PLL is selected + SIM->SOPT2 |= SIM_SOPT2_PLLFLLSEL_MASK; //MCG peripheral clock is PLL output + return MCGClock; + } + + //It is possible the SystemCoreClock isn't running on the PLL, and the PLL is still active + //for the peripherals, this is however an unlikely setup +} + + +#ifdef __cplusplus +} +#endif + +#endif