![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
mbed-os/targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_K82F/drivers/fsl_smartcard_phy_emvsim.c
- Committer:
- kadonotakashi
- Date:
- 2018-10-11
- Revision:
- 3:f3764f852aa8
- Parent:
- 0:8fdf9a60065b
File content as of revision 3:f3764f852aa8:
/* * Copyright (c) 2015-2016, Freescale Semiconductor, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * o Redistributions of source code must retain the above copyright notice, this list * of conditions and the following disclaimer. * * o Redistributions in binary form must reproduce the above copyright notice, this * list of conditions and the following disclaimer in the documentation and/or * other materials provided with the distribution. * * o Neither the name of Freescale Semiconductor, Inc. nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "fsl_smartcard_emvsim.h" #include "fsl_smartcard_phy_emvsim.h" /******************************************************************************* * Variables ******************************************************************************/ /******************************************************************************* * Private Functions ******************************************************************************/ static uint32_t smartcard_phy_emvsim_InterfaceClockInit(EMVSIM_Type *base, const smartcard_interface_config_t *config, uint32_t srcClock_Hz); /******************************************************************************* * Code ******************************************************************************/ /*! * @brief This function initializes clock module used for card clock generation */ static uint32_t smartcard_phy_emvsim_InterfaceClockInit(EMVSIM_Type *base, const smartcard_interface_config_t *config, uint32_t srcClock_Hz) { assert((NULL != config) && (0u != srcClock_Hz)); uint32_t emvsimClkMhz = 0u; uint8_t emvsimPRSCValue; /* Retrieve EMV SIM clock */ emvsimClkMhz = srcClock_Hz / 1000000u; /* Calculate MOD value */ emvsimPRSCValue = (emvsimClkMhz * 1000u) / (config->smartCardClock / 1000u); /* Set clock prescaler */ base->CLKCFG = (base->CLKCFG & ~EMVSIM_CLKCFG_CLK_PRSC_MASK) | EMVSIM_CLKCFG_CLK_PRSC(emvsimPRSCValue); return config->smartCardClock; } void SMARTCARD_PHY_EMVSIM_GetDefaultConfig(smartcard_interface_config_t *config) { assert((NULL != config)); config->clockToResetDelay = SMARTCARD_INIT_DELAY_CLOCK_CYCLES; config->vcc = kSMARTCARD_VoltageClassB3_3V; } status_t SMARTCARD_PHY_EMVSIM_Init(EMVSIM_Type *base, smartcard_interface_config_t const *config, uint32_t srcClock_Hz) { if ((NULL == config) || (0u == srcClock_Hz)) { return kStatus_SMARTCARD_InvalidInput; } /* SMARTCARD clock initialization. Clock is still not active after this call */ if (config->smartCardClock != smartcard_phy_emvsim_InterfaceClockInit(base, config, srcClock_Hz)) { return kStatus_SMARTCARD_OtherError; } /* Configure EMVSIM direct interface driver interrupt occur according card presence */ if (base->PCSR & EMVSIM_PCSR_SPDP_MASK) { base->PCSR &= ~EMVSIM_PCSR_SPDES_MASK; } else { base->PCSR |= EMVSIM_PCSR_SPDES_MASK; } /* Un-mask presence detect interrupt flag */ base->PCSR &= ~EMVSIM_PCSR_SPDIM_MASK; return kStatus_SMARTCARD_Success; } void SMARTCARD_PHY_EMVSIM_Deinit(EMVSIM_Type *base, const smartcard_interface_config_t *config) { assert((NULL != config)); /* Deactivate VCC, CLOCK */ base->PCSR &= ~(EMVSIM_PCSR_SCEN_MASK | EMVSIM_PCSR_SVCC_EN_MASK); } status_t SMARTCARD_PHY_EMVSIM_Activate(EMVSIM_Type *base, smartcard_context_t *context, smartcard_reset_type_t resetType) { if ((NULL == context) || (NULL == context->timeDelay)) { return kStatus_SMARTCARD_InvalidInput; } assert(context->interfaceConfig.vcc == kSMARTCARD_VoltageClassB3_3V); context->timersState.initCharTimerExpired = false; context->resetType = resetType; /* Disable receiver to deactivate GPC timers trigger */ base->CTRL &= ~EMVSIM_CTRL_RCV_EN_MASK; if (resetType == kSMARTCARD_ColdReset) { /* Set polarity of VCC to active high, Enable VCC for SMARTCARD, Enable smart card clock */ base->PCSR = (base->PCSR & ~EMVSIM_PCSR_VCCENP_MASK) | (EMVSIM_PCSR_SVCC_EN_MASK | EMVSIM_PCSR_SCEN_MASK); /* Set transfer inversion to default(direct) value */ base->CTRL &= ~EMVSIM_CTRL_IC_MASK; } else if (resetType == kSMARTCARD_WarmReset) { /* Ensure that card is already active */ if (!context->cardParams.active) { /* Card is not active;hence return */ return kStatus_SMARTCARD_CardNotActivated; } } else { return kStatus_SMARTCARD_InvalidInput; } /* Set Reset low */ base->PCSR &= ~EMVSIM_PCSR_SRST_MASK; /* Calculate time delay needed for reset */ uint32_t temp = (uint32_t)((float)(1 + (float)(((float)(1000u * context->interfaceConfig.clockToResetDelay)) / ((float)context->interfaceConfig.smartCardClock / 1000)))); context->timeDelay(temp); /* Pull reset HIGH Now to mark the end of Activation sequence */ base->PCSR |= EMVSIM_PCSR_SRST_MASK; /* Disable GPC timers input clock */ base->CLKCFG &= ~(EMVSIM_CLKCFG_GPCNT0_CLK_SEL_MASK | EMVSIM_CLKCFG_GPCNT1_CLK_SEL_MASK); /* Down counter trigger, and clear any pending counter status flag */ base->TX_STATUS = EMVSIM_TX_STATUS_GPCNT1_TO_MASK | EMVSIM_TX_STATUS_GPCNT0_TO_MASK; /* Set counter value for TS detection delay */ base->GPCNT0_VAL = (SMARTCARD_INIT_DELAY_CLOCK_CYCLES + SMARTCARD_INIT_DELAY_CLOCK_CYCLES_ADJUSTMENT); /* Pre-load counter value for ATR duration delay */ base->GPCNT1_VAL = (SMARTCARD_EMV_ATR_DURATION_ETU + SMARTCARD_ATR_DURATION_ADJUSTMENT); /* Select the clock for GPCNT for both TS detection and early start of ATR duration counter */ base->CLKCFG |= (EMVSIM_CLKCFG_GPCNT0_CLK_SEL(kEMVSIM_GPCCardClock) | EMVSIM_CLKCFG_GPCNT1_CLK_SEL(kEMVSIM_GPCTxClock)); /* Set receiver to ICM mode, Flush RX FIFO */ base->CTRL |= (EMVSIM_CTRL_ICM_MASK | EMVSIM_CTRL_FLSH_RX_MASK); /* Enable counter interrupt for TS detection */ base->INT_MASK &= ~EMVSIM_INT_MASK_GPCNT0_IM_MASK; /* Clear any pending status flags */ base->RX_STATUS = 0xFFFFFFFFu; /* Enable receiver */ base->CTRL |= EMVSIM_CTRL_RCV_EN_MASK; /* Here the card was activated */ context->cardParams.active = true; return kStatus_SMARTCARD_Success; } status_t SMARTCARD_PHY_EMVSIM_Deactivate(EMVSIM_Type *base, smartcard_context_t *context) { if ((NULL == context)) { return kStatus_SMARTCARD_InvalidInput; } /* Assert Reset */ base->PCSR &= ~EMVSIM_PCSR_SRST_MASK; /* Stop SMARTCARD clock generation */ base->PCSR &= ~EMVSIM_PCSR_SCEN_MASK; /* Deactivate card by disabling VCC */ base->PCSR &= ~EMVSIM_PCSR_SVCC_EN_MASK; /* According EMV 4.3 specification deactivation sequence should be done within 100ms. * The period is measured from the time that RST is set to state L to the time that Vcc * reaches 0.4 V or less. */ context->timeDelay(100 * 1000); /* Here the card was deactivated */ context->cardParams.active = false; return kStatus_SMARTCARD_Success; } status_t SMARTCARD_PHY_EMVSIM_Control(EMVSIM_Type *base, smartcard_context_t *context, smartcard_interface_control_t control, uint32_t param) { if ((NULL == context)) { return kStatus_SMARTCARD_InvalidInput; } switch (control) { case kSMARTCARD_InterfaceSetVcc: /* Only 3.3V interface supported by the direct interface */ assert((smartcard_card_voltage_class_t)param == kSMARTCARD_VoltageClassB3_3V); context->interfaceConfig.vcc = (smartcard_card_voltage_class_t)param; break; case kSMARTCARD_InterfaceSetClockToResetDelay: /* Set interface clock to Reset delay set by caller */ context->interfaceConfig.clockToResetDelay = param; break; case kSMARTCARD_InterfaceReadStatus: /* Expecting active low present detect */ context->cardParams.present = (emvsim_presence_detect_status_t)((base->PCSR & EMVSIM_PCSR_SPDP_MASK) >> EMVSIM_PCSR_SPDP_SHIFT) == kEMVSIM_DetectPinIsLow; break; default: return kStatus_SMARTCARD_InvalidInput; } return kStatus_SMARTCARD_Success; }