![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
mbed-os/targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_K82F/drivers/fsl_smartcard.h
- Committer:
- kadonotakashi
- Date:
- 2018-10-11
- Revision:
- 3:f3764f852aa8
- Parent:
- 0:8fdf9a60065b
File content as of revision 3:f3764f852aa8:
/* * Copyright (c) 2015-2016, Freescale Semiconductor, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * o Redistributions of source code must retain the above copyright notice, this list * of conditions and the following disclaimer. * * o Redistributions in binary form must reproduce the above copyright notice, this * list of conditions and the following disclaimer in the documentation and/or * other materials provided with the distribution. * * o Neither the name of Freescale Semiconductor, Inc. nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _FSL_SMARTCARD_H_ #define _FSL_SMARTCARD_H_ #include "fsl_common.h" /*! * @addtogroup smartcard * @{ */ /******************************************************************************* * Definitions ******************************************************************************/ /*! @name Driver version */ /*@{*/ /*! @brief Smart card driver version 2.1.2. */ #define FSL_SMARTCARD_DRIVER_VERSION (MAKE_VERSION(2, 1, 2)) /*@}*/ /*! @brief Smart card global define which specify number of clock cycles until initial 'TS' character has to be received */ #define SMARTCARD_INIT_DELAY_CLOCK_CYCLES (42000u) /*! @brief Smart card global define which specify number of clock cycles during which ATR string has to be received */ #define SMARTCARD_EMV_ATR_DURATION_ETU (20150u) /*! @brief Smart card specification initial TS character definition of direct convention */ #define SMARTCARD_TS_DIRECT_CONVENTION (0x3Bu) /*! @brief Smart card specification initial TS character definition of inverse convention */ #define SMARTCARD_TS_INVERSE_CONVENTION (0x3Fu) /*! @brief Smart card Error codes. */ typedef enum _smartcard_status { kStatus_SMARTCARD_Success = MAKE_STATUS(kStatusGroup_SMARTCARD, 0), /*!< Transfer ends successfully */ kStatus_SMARTCARD_TxBusy = MAKE_STATUS(kStatusGroup_SMARTCARD, 1), /*!< Transmit in progress */ kStatus_SMARTCARD_RxBusy = MAKE_STATUS(kStatusGroup_SMARTCARD, 2), /*!< Receiving in progress */ kStatus_SMARTCARD_NoTransferInProgress = MAKE_STATUS(kStatusGroup_SMARTCARD, 3), /*!< No transfer in progress */ kStatus_SMARTCARD_Timeout = MAKE_STATUS(kStatusGroup_SMARTCARD, 4), /*!< Transfer ends with time-out */ kStatus_SMARTCARD_Initialized = MAKE_STATUS(kStatusGroup_SMARTCARD, 5), /*!< Smart card driver is already initialized */ kStatus_SMARTCARD_PhyInitialized = MAKE_STATUS(kStatusGroup_SMARTCARD, 6), /*!< Smart card PHY drive is already initialized */ kStatus_SMARTCARD_CardNotActivated = MAKE_STATUS(kStatusGroup_SMARTCARD, 7), /*!< Smart card is not activated */ kStatus_SMARTCARD_InvalidInput = MAKE_STATUS(kStatusGroup_SMARTCARD, 8), /*!< Function called with invalid input arguments */ kStatus_SMARTCARD_OtherError = MAKE_STATUS(kStatusGroup_SMARTCARD, 9) /*!< Some other error occur */ } smartcard_status_t; /*! @brief Control codes for the Smart card protocol timers and misc. */ typedef enum _smartcard_control { kSMARTCARD_EnableADT = 0x0u, kSMARTCARD_DisableADT = 0x1u, kSMARTCARD_EnableGTV = 0x2u, kSMARTCARD_DisableGTV = 0x3u, kSMARTCARD_ResetWWT = 0x4u, kSMARTCARD_EnableWWT = 0x5u, kSMARTCARD_DisableWWT = 0x6u, kSMARTCARD_ResetCWT = 0x7u, kSMARTCARD_EnableCWT = 0x8u, kSMARTCARD_DisableCWT = 0x9u, kSMARTCARD_ResetBWT = 0xAu, kSMARTCARD_EnableBWT = 0xBu, kSMARTCARD_DisableBWT = 0xCu, kSMARTCARD_EnableInitDetect = 0xDu, kSMARTCARD_EnableAnack = 0xEu, kSMARTCARD_DisableAnack = 0xFu, kSMARTCARD_ConfigureBaudrate = 0x10u, kSMARTCARD_SetupATRMode = 0x11u, kSMARTCARD_SetupT0Mode = 0x12u, kSMARTCARD_SetupT1Mode = 0x13u, kSMARTCARD_EnableReceiverMode = 0x14u, kSMARTCARD_DisableReceiverMode = 0x15u, kSMARTCARD_EnableTransmitterMode = 0x16u, kSMARTCARD_DisableTransmitterMode = 0x17u, kSMARTCARD_ResetWaitTimeMultiplier = 0x18u, } smartcard_control_t; /*! @brief Defines Smart card interface voltage class values */ typedef enum _smartcard_card_voltage_class { kSMARTCARD_VoltageClassUnknown = 0x0u, kSMARTCARD_VoltageClassA5_0V = 0x1u, kSMARTCARD_VoltageClassB3_3V = 0x2u, kSMARTCARD_VoltageClassC1_8V = 0x3u } smartcard_card_voltage_class_t; /*! @brief Defines Smart card I/O transfer states */ typedef enum _smartcard_transfer_state { kSMARTCARD_IdleState = 0x0u, kSMARTCARD_WaitingForTSState = 0x1u, kSMARTCARD_InvalidTSDetecetedState = 0x2u, kSMARTCARD_ReceivingState = 0x3u, kSMARTCARD_TransmittingState = 0x4u, } smartcard_transfer_state_t; /*! @brief Defines Smart card reset types */ typedef enum _smartcard_reset_type { kSMARTCARD_ColdReset = 0x0u, kSMARTCARD_WarmReset = 0x1u, kSMARTCARD_NoColdReset = 0x2u, kSMARTCARD_NoWarmReset = 0x3u, } smartcard_reset_type_t; /*! @brief Defines Smart card transport protocol types */ typedef enum _smartcard_transport_type { kSMARTCARD_T0Transport = 0x0u, kSMARTCARD_T1Transport = 0x1u } smartcard_transport_type_t; /*! @brief Defines Smart card data parity types */ typedef enum _smartcard_parity_type { kSMARTCARD_EvenParity = 0x0u, kSMARTCARD_OddParity = 0x1u } smartcard_parity_type_t; /*! @brief Defines data Convention format */ typedef enum _smartcard_card_convention { kSMARTCARD_DirectConvention = 0x0u, kSMARTCARD_InverseConvention = 0x1u } smartcard_card_convention_t; /*! @brief Defines Smart card interface IC control types */ typedef enum _smartcard_interface_control { kSMARTCARD_InterfaceSetVcc = 0x00u, kSMARTCARD_InterfaceSetClockToResetDelay = 0x01u, kSMARTCARD_InterfaceReadStatus = 0x02u } smartcard_interface_control_t; /*! @brief Defines transfer direction.*/ typedef enum _smartcard_direction { kSMARTCARD_Receive = 0u, kSMARTCARD_Transmit = 1u } smartcard_direction_t; /*! @brief Smart card interface interrupt callback function type */ typedef void (*smartcard_interface_callback_t)(void *smartcardContext, void *param); /*! @brief Smart card transfer interrupt callback function type */ typedef void (*smartcard_transfer_callback_t)(void *smartcardContext, void *param); /*! @brief Time Delay function used to passive waiting using RTOS [us] */ typedef void (*smartcard_time_delay_t)(uint32_t us); /*! @brief Defines card-specific parameters for Smart card driver */ typedef struct _smartcard_card_params { /* ISO7816/EMV4.3 specification variables */ uint16_t Fi; /*!< 4 bits Fi - clock rate conversion integer */ uint8_t fMax; /*!< Maximum Smart card frequency in MHz */ uint8_t WI; /*!< 8 bits WI - work wait time integer */ uint8_t Di; /*!< 4 bits DI - baud rate divisor */ uint8_t BWI; /*!< 4 bits BWI - block wait time integer */ uint8_t CWI; /*!< 4 bits CWI - character wait time integer */ uint8_t BGI; /*!< 4 bits BGI - block guard time integer */ uint8_t GTN; /*!< 8 bits GTN - extended guard time integer */ uint8_t IFSC; /*!< Indicates IFSC value of the card */ uint8_t modeNegotiable; /*!< Indicates if the card acts in negotiable or a specific mode. */ uint8_t currentD; /*!< 4 bits DI - current baud rate divisor*/ /* Driver-specific variables */ uint8_t status; /*!< Indicates smart card status */ bool t0Indicated; /*!< Indicates ff T=0 indicated in TD1 byte */ bool t1Indicated; /*!< Indicates if T=1 indicated in TD2 byte */ bool atrComplete; /*!< Indicates whether the ATR received from the card was complete or not */ bool atrValid; /*!< Indicates whether the ATR received from the card was valid or not */ bool present; /*!< Indicates if a smart card is present */ bool active; /*!< Indicates if the smart card is activated */ bool faulty; /*!< Indicates whether smart card/interface is faulty */ smartcard_card_convention_t convention; /*!< Card convention, kSMARTCARD_DirectConvention for direct convention, kSMARTCARD_InverseConvention for inverse convention */ } smartcard_card_params_t; /*! @brief Smart card defines the state of the EMV timers in the Smart card driver */ typedef struct _smartcard_timers_state { volatile bool adtExpired; /*!< Indicates whether ADT timer expired */ volatile bool wwtExpired; /*!< Indicates whether WWT timer expired */ volatile bool cwtExpired; /*!< Indicates whether CWT timer expired */ volatile bool bwtExpired; /*!< Indicates whether BWT timer expired */ volatile bool initCharTimerExpired; /*!< Indicates whether reception timer for initialization character (TS) after the RST has expired */ } smartcard_timers_state_t; /*! @brief Defines user specified configuration of Smart card interface */ typedef struct _smartcard_interface_config { uint32_t smartCardClock; /*!< Smart card interface clock [Hz] */ uint32_t clockToResetDelay; /*!< Indicates clock to RST apply delay [smart card clock cycles] */ uint8_t clockModule; /*!< Smart card clock module number */ uint8_t clockModuleChannel; /*!< Smart card clock module channel number */ uint8_t clockModuleSourceClock; /*!< Smart card clock module source clock [e.g., BusClk] */ smartcard_card_voltage_class_t vcc; /*!< Smart card voltage class */ uint8_t controlPort; /*!< Smart card PHY control port instance */ uint8_t controlPin; /*!< Smart card PHY control pin instance */ uint8_t irqPort; /*!< Smart card PHY Interrupt port instance */ uint8_t irqPin; /*!< Smart card PHY Interrupt pin instance */ uint8_t resetPort; /*!< Smart card reset port instance */ uint8_t resetPin; /*!< Smart card reset pin instance */ uint8_t vsel0Port; /*!< Smart card PHY Vsel0 control port instance */ uint8_t vsel0Pin; /*!< Smart card PHY Vsel0 control pin instance */ uint8_t vsel1Port; /*!< Smart card PHY Vsel1 control port instance */ uint8_t vsel1Pin; /*!< Smart card PHY Vsel1 control pin instance */ uint8_t dataPort; /*!< Smart card PHY data port instance */ uint8_t dataPin; /*!< Smart card PHY data pin instance */ uint8_t dataPinMux; /*!< Smart card PHY data pin mux option */ uint8_t tsTimerId; /*!< Numerical identifier of the External HW timer for Initial character detection */ } smartcard_interface_config_t; /*! @brief Defines user transfer structure used to initialize transfer */ typedef struct _smartcard_xfer { smartcard_direction_t direction; /*!< Direction of communication. (RX/TX) */ uint8_t *buff; /*!< The buffer of data. */ size_t size; /*!< The number of transferred units. */ } smartcard_xfer_t; /*! * @brief Runtime state of the Smart card driver. */ typedef struct _smartcard_context { /* Xfer part */ void *base; /*!< Smart card module base address */ smartcard_direction_t direction; /*!< Direction of communication. (RX/TX) */ uint8_t *xBuff; /*!< The buffer of data being transferred.*/ volatile size_t xSize; /*!< The number of bytes to be transferred. */ volatile bool xIsBusy; /*!< True if there is an active transfer. */ uint8_t txFifoEntryCount; /*!< Number of data word entries in transmit FIFO. */ /* Smart card Interface part */ smartcard_interface_callback_t interfaceCallback; /*!< Callback to invoke after interface IC raised interrupt.*/ smartcard_transfer_callback_t transferCallback; /*!< Callback to invoke after transfer event occur.*/ void *interfaceCallbackParam; /*!< Interface callback parameter pointer.*/ void *transferCallbackParam; /*!< Transfer callback parameter pointer.*/ smartcard_time_delay_t timeDelay; /*!< Function which handles time delay defined by user or RTOS. */ smartcard_reset_type_t resetType; /*!< Indicates whether a Cold reset or Warm reset was requested. */ smartcard_transport_type_t tType; /*!< Indicates current transfer protocol (T0 or T1) */ /* Smart card State part */ volatile smartcard_transfer_state_t transferState; /*!< Indicates the current transfer state */ smartcard_timers_state_t timersState; /*!< Indicates the state of different protocol timers used in driver */ smartcard_card_params_t cardParams; /*!< Smart card parameters(ATR and current) and interface slots states(ATR and current) */ uint8_t IFSD; /*!< Indicates the terminal IFSD */ smartcard_parity_type_t parity; /*!< Indicates current parity even/odd */ volatile bool rxtCrossed; /*!< Indicates whether RXT thresholds has been crossed */ volatile bool txtCrossed; /*!< Indicates whether TXT thresholds has been crossed */ volatile bool wtxRequested; /*!< Indicates whether WTX has been requested or not*/ volatile bool parityError; /*!< Indicates whether a parity error has been detected */ uint8_t statusBytes[2]; /*!< Used to store Status bytes SW1, SW2 of the last executed card command response */ /* Configuration part */ smartcard_interface_config_t interfaceConfig; /*!< Smart card interface configuration structure */ } smartcard_context_t; /*! @}*/ #endif /* _FSL_SMARTCARD_H_*/