![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
mbed-os/targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_K82F/drivers/fsl_ltc.h
- Committer:
- kadonotakashi
- Date:
- 2018-10-11
- Revision:
- 3:f3764f852aa8
- Parent:
- 0:8fdf9a60065b
File content as of revision 3:f3764f852aa8:
/* * Copyright (c) 2015-2016, Freescale Semiconductor, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * o Redistributions of source code must retain the above copyright notice, this list * of conditions and the following disclaimer. * * o Redistributions in binary form must reproduce the above copyright notice, this * list of conditions and the following disclaimer in the documentation and/or * other materials provided with the distribution. * * o Neither the name of Freescale Semiconductor, Inc. nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _FSL_LTC_H_ #define _FSL_LTC_H_ #include "fsl_common.h" /******************************************************************************* * Definitions *******************************************************************************/ /*! * @addtogroup ltc * @{ */ /*! @name Driver version */ /*@{*/ /*! @brief LTC driver version. Version 2.0.2. * * Current version: 2.0.2 * * Change log: * - Version 2.0.1 * - fixed warning during g++ compilation * * - Version 2.0.2 * - fixed [KPSDK-10932][LTC][SHA] LTC_HASH() blocks indefinitely when message size exceeds 4080 bytes */ #define FSL_LTC_DRIVER_VERSION (MAKE_VERSION(2, 0, 2)) /*@}*/ /*! @} */ /******************************************************************************* * AES Definitions *******************************************************************************/ /*! * @addtogroup ltc_driver_aes * @{ */ /*! AES block size in bytes */ #define LTC_AES_BLOCK_SIZE 16 /*! AES Input Vector size in bytes */ #define LTC_AES_IV_SIZE 16 /*! @brief Type of AES key for ECB and CBC decrypt operations. */ typedef enum _ltc_aes_key_t { kLTC_EncryptKey = 0U, /*!< Input key is an encrypt key */ kLTC_DecryptKey = 1U, /*!< Input key is a decrypt key */ } ltc_aes_key_t; /*! *@} */ /******************************************************************************* * DES Definitions *******************************************************************************/ /*! * @addtogroup ltc_driver_des * @{ */ /*! @brief LTC DES key size - 64 bits. */ #define LTC_DES_KEY_SIZE 8 /*! @brief LTC DES IV size - 8 bytes */ #define LTC_DES_IV_SIZE 8 /*! *@} */ /******************************************************************************* * HASH Definitions ******************************************************************************/ /*! * @addtogroup ltc_driver_hash * @{ */ /*! Supported cryptographic block cipher functions for HASH creation */ typedef enum _ltc_hash_algo_t { kLTC_XcbcMac = 0, /*!< XCBC-MAC (AES engine) */ kLTC_Cmac, /*!< CMAC (AES engine) */ #if defined(FSL_FEATURE_LTC_HAS_SHA) && FSL_FEATURE_LTC_HAS_SHA kLTC_Sha1, /*!< SHA_1 (MDHA engine) */ kLTC_Sha224, /*!< SHA_224 (MDHA engine) */ kLTC_Sha256, /*!< SHA_256 (MDHA engine) */ #endif /* FSL_FEATURE_LTC_HAS_SHA */ } ltc_hash_algo_t; /*! @brief LTC HASH Context size. */ #if defined(FSL_FEATURE_LTC_HAS_SHA) && FSL_FEATURE_LTC_HAS_SHA #define LTC_HASH_CTX_SIZE 41 #else #define LTC_HASH_CTX_SIZE 29 #endif /* FSL_FEATURE_LTC_HAS_SHA */ /*! @brief Storage type used to save hash context. */ typedef uint32_t ltc_hash_ctx_t[LTC_HASH_CTX_SIZE]; /*! *@} */ /******************************************************************************* * PKHA Definitions ******************************************************************************/ /*! * @addtogroup ltc_driver_pkha * @{ */ /*! PKHA ECC point structure */ typedef struct _ltc_pkha_ecc_point_t { uint8_t *X; /*!< X coordinate (affine) */ uint8_t *Y; /*!< Y coordinate (affine) */ } ltc_pkha_ecc_point_t; /*! @brief Use of timing equalized version of a PKHA function. */ typedef enum _ltc_pkha_timing_t { kLTC_PKHA_NoTimingEqualized = 0U, /*!< Normal version of a PKHA operation */ kLTC_PKHA_TimingEqualized = 1U /*!< Timing-equalized version of a PKHA operation */ } ltc_pkha_timing_t; /*! @brief Integer vs binary polynomial arithmetic selection. */ typedef enum _ltc_pkha_f2m_t { kLTC_PKHA_IntegerArith = 0U, /*!< Use integer arithmetic */ kLTC_PKHA_F2mArith = 1U /*!< Use binary polynomial arithmetic */ } ltc_pkha_f2m_t; /*! @brief Montgomery or normal PKHA input format. */ typedef enum _ltc_pkha_montgomery_form_t { kLTC_PKHA_NormalValue = 0U, /*!< PKHA number is normal integer */ kLTC_PKHA_MontgomeryFormat = 1U /*!< PKHA number is in montgomery format */ } ltc_pkha_montgomery_form_t; /*! *@} */ /******************************************************************************* * API ******************************************************************************/ #if defined(__cplusplus) extern "C" { #endif /*! * @addtogroup ltc * @{ */ /*! * @brief Initializes the LTC driver. * This function initializes the LTC driver. * @param base LTC peripheral base address */ void LTC_Init(LTC_Type *base); /*! * @brief Deinitializes the LTC driver. * This function deinitializes the LTC driver. * @param base LTC peripheral base address */ void LTC_Deinit(LTC_Type *base); #if defined(FSL_FEATURE_LTC_HAS_DPAMS) && FSL_FEATURE_LTC_HAS_DPAMS /*! * @brief Sets the DPA Mask Seed register. * * The DPA Mask Seed register reseeds the mask that provides resistance against DPA (differential power analysis) * attacks on AES or DES keys. * * Differential Power Analysis Mask (DPA) resistance uses a randomly changing mask that introduces * "noise" into the power consumed by the AES or DES. This reduces the signal-to-noise ratio that differential * power analysis attacks use to "guess" bits of the key. This randomly changing mask should be * seeded at POR, and continues to provide DPA resistance from that point on. However, to provide even more * DPA protection it is recommended that the DPA mask be reseeded after every 50,000 blocks have * been processed. At that time, software can opt to write a new seed (preferably obtained from an RNG) * into the DPA Mask Seed register (DPAMS), or software can opt to provide the new seed earlier or * later, or not at all. DPA resistance continues even if the DPA mask is never reseeded. * * @param base LTC peripheral base address * @param mask The DPA mask seed. */ void LTC_SetDpaMaskSeed(LTC_Type *base, uint32_t mask); #endif /* FSL_FEATURE_LTC_HAS_DPAMS */ /*! *@} */ /******************************************************************************* * AES API ******************************************************************************/ /*! * @addtogroup ltc_driver_aes * @{ */ /*! * @brief Transforms an AES encrypt key (forward AES) into the decrypt key (inverse AES). * * Transforms the AES encrypt key (forward AES) into the decrypt key (inverse AES). * The key derived by this function can be used as a direct load decrypt key * for AES ECB and CBC decryption operations (keyType argument). * * @param base LTC peripheral base address * @param encryptKey Input key for decrypt key transformation * @param[out] decryptKey Output key, the decrypt form of the AES key. * @param keySize Size of the input key and output key in bytes. Must be 16, 24, or 32. * @return Status from key generation operation */ status_t LTC_AES_GenerateDecryptKey(LTC_Type *base, const uint8_t *encryptKey, uint8_t *decryptKey, uint32_t keySize); /*! * @brief Encrypts AES using the ECB block mode. * * Encrypts AES using the ECB block mode. * * @param base LTC peripheral base address * @param plaintext Input plain text to encrypt * @param[out] ciphertext Output cipher text * @param size Size of input and output data in bytes. Must be multiple of 16 bytes. * @param key Input key to use for encryption * @param keySize Size of the input key, in bytes. Must be 16, 24, or 32. * @return Status from encrypt operation */ status_t LTC_AES_EncryptEcb( LTC_Type *base, const uint8_t *plaintext, uint8_t *ciphertext, uint32_t size, const uint8_t *key, uint32_t keySize); /*! * @brief Decrypts AES using ECB block mode. * * Decrypts AES using ECB block mode. * * @param base LTC peripheral base address * @param ciphertext Input cipher text to decrypt * @param[out] plaintext Output plain text * @param size Size of input and output data in bytes. Must be multiple of 16 bytes. * @param key Input key. * @param keySize Size of the input key, in bytes. Must be 16, 24, or 32. * @param keyType Input type of the key (allows to directly load decrypt key for AES ECB decrypt operation.) * @return Status from decrypt operation */ status_t LTC_AES_DecryptEcb(LTC_Type *base, const uint8_t *ciphertext, uint8_t *plaintext, uint32_t size, const uint8_t *key, uint32_t keySize, ltc_aes_key_t keyType); /*! * @brief Encrypts AES using CBC block mode. * * @param base LTC peripheral base address * @param plaintext Input plain text to encrypt * @param[out] ciphertext Output cipher text * @param size Size of input and output data in bytes. Must be multiple of 16 bytes. * @param iv Input initial vector to combine with the first input block. * @param key Input key to use for encryption * @param keySize Size of the input key, in bytes. Must be 16, 24, or 32. * @return Status from encrypt operation */ status_t LTC_AES_EncryptCbc(LTC_Type *base, const uint8_t *plaintext, uint8_t *ciphertext, uint32_t size, const uint8_t iv[LTC_AES_IV_SIZE], const uint8_t *key, uint32_t keySize); /*! * @brief Decrypts AES using CBC block mode. * * @param base LTC peripheral base address * @param ciphertext Input cipher text to decrypt * @param[out] plaintext Output plain text * @param size Size of input and output data in bytes. Must be multiple of 16 bytes. * @param iv Input initial vector to combine with the first input block. * @param key Input key to use for decryption * @param keySize Size of the input key, in bytes. Must be 16, 24, or 32. * @param keyType Input type of the key (allows to directly load decrypt key for AES CBC decrypt operation.) * @return Status from decrypt operation */ status_t LTC_AES_DecryptCbc(LTC_Type *base, const uint8_t *ciphertext, uint8_t *plaintext, uint32_t size, const uint8_t iv[LTC_AES_IV_SIZE], const uint8_t *key, uint32_t keySize, ltc_aes_key_t keyType); /*! * @brief Encrypts or decrypts AES using CTR block mode. * * Encrypts or decrypts AES using CTR block mode. * AES CTR mode uses only forward AES cipher and same algorithm for encryption and decryption. * The only difference between encryption and decryption is that, for encryption, the input argument * is plain text and the output argument is cipher text. For decryption, the input argument is cipher text * and the output argument is plain text. * * @param base LTC peripheral base address * @param input Input data for CTR block mode * @param[out] output Output data for CTR block mode * @param size Size of input and output data in bytes * @param[in,out] counter Input counter (updates on return) * @param key Input key to use for forward AES cipher * @param keySize Size of the input key, in bytes. Must be 16, 24, or 32. * @param[out] counterlast Output cipher of last counter, for chained CTR calls. NULL can be passed if chained calls are * not used. * @param[out] szLeft Output number of bytes in left unused in counterlast block. NULL can be passed if chained calls * are not used. * @return Status from encrypt operation */ status_t LTC_AES_CryptCtr(LTC_Type *base, const uint8_t *input, uint8_t *output, uint32_t size, uint8_t counter[LTC_AES_BLOCK_SIZE], const uint8_t *key, uint32_t keySize, uint8_t counterlast[LTC_AES_BLOCK_SIZE], uint32_t *szLeft); /*! AES CTR decrypt is mapped to the AES CTR generic operation */ #define LTC_AES_DecryptCtr(base, input, output, size, counter, key, keySize, counterlast, szLeft) \ LTC_AES_CryptCtr(base, input, output, size, counter, key, keySize, counterlast, szLeft) /*! AES CTR encrypt is mapped to the AES CTR generic operation */ #define LTC_AES_EncryptCtr(base, input, output, size, counter, key, keySize, counterlast, szLeft) \ LTC_AES_CryptCtr(base, input, output, size, counter, key, keySize, counterlast, szLeft) #if defined(FSL_FEATURE_LTC_HAS_GCM) && FSL_FEATURE_LTC_HAS_GCM /*! * @brief Encrypts AES and tags using GCM block mode. * * Encrypts AES and optionally tags using GCM block mode. If plaintext is NULL, only the GHASH is calculated and output * in the 'tag' field. * * @param base LTC peripheral base address * @param plaintext Input plain text to encrypt * @param[out] ciphertext Output cipher text. * @param size Size of input and output data in bytes * @param iv Input initial vector * @param ivSize Size of the IV * @param aad Input additional authentication data * @param aadSize Input size in bytes of AAD * @param key Input key to use for encryption * @param keySize Size of the input key, in bytes. Must be 16, 24, or 32. * @param[out] tag Output hash tag. Set to NULL to skip tag processing. * @param tagSize Input size of the tag to generate, in bytes. Must be 4,8,12,13,14,15 or 16. * @return Status from encrypt operation */ status_t LTC_AES_EncryptTagGcm(LTC_Type *base, const uint8_t *plaintext, uint8_t *ciphertext, uint32_t size, const uint8_t *iv, uint32_t ivSize, const uint8_t *aad, uint32_t aadSize, const uint8_t *key, uint32_t keySize, uint8_t *tag, uint32_t tagSize); /*! * @brief Decrypts AES and authenticates using GCM block mode. * * Decrypts AES and optionally authenticates using GCM block mode. If ciphertext is NULL, only the GHASH is calculated * and compared with the received GHASH in 'tag' field. * * @param base LTC peripheral base address * @param ciphertext Input cipher text to decrypt * @param[out] plaintext Output plain text. * @param size Size of input and output data in bytes * @param iv Input initial vector * @param ivSize Size of the IV * @param aad Input additional authentication data * @param aadSize Input size in bytes of AAD * @param key Input key to use for encryption * @param keySize Size of the input key, in bytes. Must be 16, 24, or 32. * @param tag Input hash tag to compare. Set to NULL to skip tag processing. * @param tagSize Input size of the tag, in bytes. Must be 4, 8, 12, 13, 14, 15, or 16. * @return Status from decrypt operation */ status_t LTC_AES_DecryptTagGcm(LTC_Type *base, const uint8_t *ciphertext, uint8_t *plaintext, uint32_t size, const uint8_t *iv, uint32_t ivSize, const uint8_t *aad, uint32_t aadSize, const uint8_t *key, uint32_t keySize, const uint8_t *tag, uint32_t tagSize); #endif /* FSL_FEATURE_LTC_HAS_GCM */ /*! * @brief Encrypts AES and tags using CCM block mode. * * Encrypts AES and optionally tags using CCM block mode. * * @param base LTC peripheral base address * @param plaintext Input plain text to encrypt * @param[out] ciphertext Output cipher text. * @param size Size of input and output data in bytes. Zero means authentication only. * @param iv Nonce * @param ivSize Length of the Nonce in bytes. Must be 7, 8, 9, 10, 11, 12, or 13. * @param aad Input additional authentication data. Can be NULL if aadSize is zero. * @param aadSize Input size in bytes of AAD. Zero means data mode only (authentication skipped). * @param key Input key to use for encryption * @param keySize Size of the input key, in bytes. Must be 16, 24, or 32. * @param[out] tag Generated output tag. Set to NULL to skip tag processing. * @param tagSize Input size of the tag to generate, in bytes. Must be 4, 6, 8, 10, 12, 14, or 16. * @return Status from encrypt operation */ status_t LTC_AES_EncryptTagCcm(LTC_Type *base, const uint8_t *plaintext, uint8_t *ciphertext, uint32_t size, const uint8_t *iv, uint32_t ivSize, const uint8_t *aad, uint32_t aadSize, const uint8_t *key, uint32_t keySize, uint8_t *tag, uint32_t tagSize); /*! * @brief Decrypts AES and authenticates using CCM block mode. * * Decrypts AES and optionally authenticates using CCM block mode. * * @param base LTC peripheral base address * @param ciphertext Input cipher text to decrypt * @param[out] plaintext Output plain text. * @param size Size of input and output data in bytes. Zero means authentication only. * @param iv Nonce * @param ivSize Length of the Nonce in bytes. Must be 7, 8, 9, 10, 11, 12, or 13. * @param aad Input additional authentication data. Can be NULL if aadSize is zero. * @param aadSize Input size in bytes of AAD. Zero means data mode only (authentication skipped). * @param key Input key to use for decryption * @param keySize Size of the input key, in bytes. Must be 16, 24, or 32. * @param tag Received tag. Set to NULL to skip tag processing. * @param tagSize Input size of the received tag to compare with the computed tag, in bytes. Must be 4, 6, 8, 10, 12, * 14, or 16. * @return Status from decrypt operation */ status_t LTC_AES_DecryptTagCcm(LTC_Type *base, const uint8_t *ciphertext, uint8_t *plaintext, uint32_t size, const uint8_t *iv, uint32_t ivSize, const uint8_t *aad, uint32_t aadSize, const uint8_t *key, uint32_t keySize, const uint8_t *tag, uint32_t tagSize); /*! *@} */ /******************************************************************************* * DES API ******************************************************************************/ /*! * @addtogroup ltc_driver_des * @{ */ /*! * @brief Encrypts DES using ECB block mode. * * Encrypts DES using ECB block mode. * * @param base LTC peripheral base address * @param plaintext Input plaintext to encrypt * @param[out] ciphertext Output ciphertext * @param size Size of input and output data in bytes. Must be multiple of 8 bytes. * @param key Input key to use for encryption * @return Status from encrypt/decrypt operation */ status_t LTC_DES_EncryptEcb( LTC_Type *base, const uint8_t *plaintext, uint8_t *ciphertext, uint32_t size, const uint8_t key[LTC_DES_KEY_SIZE]); /*! * @brief Decrypts DES using ECB block mode. * * Decrypts DES using ECB block mode. * * @param base LTC peripheral base address * @param ciphertext Input ciphertext to decrypt * @param[out] plaintext Output plaintext * @param size Size of input and output data in bytes. Must be multiple of 8 bytes. * @param key Input key to use for decryption * @return Status from encrypt/decrypt operation */ status_t LTC_DES_DecryptEcb( LTC_Type *base, const uint8_t *ciphertext, uint8_t *plaintext, uint32_t size, const uint8_t key[LTC_DES_KEY_SIZE]); /*! * @brief Encrypts DES using CBC block mode. * * Encrypts DES using CBC block mode. * * @param base LTC peripheral base address * @param plaintext Input plaintext to encrypt * @param[out] ciphertext Ouput ciphertext * @param size Size of input and output data in bytes * @param iv Input initial vector to combine with the first plaintext block. * The iv does not need to be secret, but it must be unpredictable. * @param key Input key to use for encryption * @return Status from encrypt/decrypt operation */ status_t LTC_DES_EncryptCbc(LTC_Type *base, const uint8_t *plaintext, uint8_t *ciphertext, uint32_t size, const uint8_t iv[LTC_DES_IV_SIZE], const uint8_t key[LTC_DES_KEY_SIZE]); /*! * @brief Decrypts DES using CBC block mode. * * Decrypts DES using CBC block mode. * * @param base LTC peripheral base address * @param ciphertext Input ciphertext to decrypt * @param[out] plaintext Output plaintext * @param size Size of input data in bytes * @param iv Input initial vector to combine with the first plaintext block. * The iv does not need to be secret, but it must be unpredictable. * @param key Input key to use for decryption * @return Status from encrypt/decrypt operation */ status_t LTC_DES_DecryptCbc(LTC_Type *base, const uint8_t *ciphertext, uint8_t *plaintext, uint32_t size, const uint8_t iv[LTC_DES_IV_SIZE], const uint8_t key[LTC_DES_KEY_SIZE]); /*! * @brief Encrypts DES using CFB block mode. * * Encrypts DES using CFB block mode. * * @param base LTC peripheral base address * @param plaintext Input plaintext to encrypt * @param size Size of input data in bytes * @param iv Input initial block. * @param key Input key to use for encryption * @param[out] ciphertext Output ciphertext * @return Status from encrypt/decrypt operation */ status_t LTC_DES_EncryptCfb(LTC_Type *base, const uint8_t *plaintext, uint8_t *ciphertext, uint32_t size, const uint8_t iv[LTC_DES_IV_SIZE], const uint8_t key[LTC_DES_KEY_SIZE]); /*! * @brief Decrypts DES using CFB block mode. * * Decrypts DES using CFB block mode. * * @param base LTC peripheral base address * @param ciphertext Input ciphertext to decrypt * @param[out] plaintext Output plaintext * @param size Size of input and output data in bytes * @param iv Input initial block. * @param key Input key to use for decryption * @return Status from encrypt/decrypt operation */ status_t LTC_DES_DecryptCfb(LTC_Type *base, const uint8_t *ciphertext, uint8_t *plaintext, uint32_t size, const uint8_t iv[LTC_DES_IV_SIZE], const uint8_t key[LTC_DES_KEY_SIZE]); /*! * @brief Encrypts DES using OFB block mode. * * Encrypts DES using OFB block mode. * * @param base LTC peripheral base address * @param plaintext Input plaintext to encrypt * @param[out] ciphertext Output ciphertext * @param size Size of input and output data in bytes * @param iv Input unique input vector. The OFB mode requires that the IV be unique * for each execution of the mode under the given key. * @param key Input key to use for encryption * @return Status from encrypt/decrypt operation */ status_t LTC_DES_EncryptOfb(LTC_Type *base, const uint8_t *plaintext, uint8_t *ciphertext, uint32_t size, const uint8_t iv[LTC_DES_IV_SIZE], const uint8_t key[LTC_DES_KEY_SIZE]); /*! * @brief Decrypts DES using OFB block mode. * * Decrypts DES using OFB block mode. * * @param base LTC peripheral base address * @param ciphertext Input ciphertext to decrypt * @param[out] plaintext Output plaintext * @param size Size of input and output data in bytes. Must be multiple of 8 bytes. * @param iv Input unique input vector. The OFB mode requires that the IV be unique * for each execution of the mode under the given key. * @param key Input key to use for decryption * @return Status from encrypt/decrypt operation */ status_t LTC_DES_DecryptOfb(LTC_Type *base, const uint8_t *ciphertext, uint8_t *plaintext, uint32_t size, const uint8_t iv[LTC_DES_IV_SIZE], const uint8_t key[LTC_DES_KEY_SIZE]); /*! * @brief Encrypts triple DES using ECB block mode with two keys. * * Encrypts triple DES using ECB block mode with two keys. * * @param base LTC peripheral base address * @param plaintext Input plaintext to encrypt * @param[out] ciphertext Output ciphertext * @param size Size of input and output data in bytes. Must be multiple of 8 bytes. * @param key1 First input key for key bundle * @param key2 Second input key for key bundle * @return Status from encrypt/decrypt operation */ status_t LTC_DES2_EncryptEcb(LTC_Type *base, const uint8_t *plaintext, uint8_t *ciphertext, uint32_t size, const uint8_t key1[LTC_DES_KEY_SIZE], const uint8_t key2[LTC_DES_KEY_SIZE]); /*! * @brief Decrypts triple DES using ECB block mode with two keys. * * Decrypts triple DES using ECB block mode with two keys. * * @param base LTC peripheral base address * @param ciphertext Input ciphertext to decrypt * @param[out] plaintext Output plaintext * @param size Size of input and output data in bytes. Must be multiple of 8 bytes. * @param key1 First input key for key bundle * @param key2 Second input key for key bundle * @return Status from encrypt/decrypt operation */ status_t LTC_DES2_DecryptEcb(LTC_Type *base, const uint8_t *ciphertext, uint8_t *plaintext, uint32_t size, const uint8_t key1[LTC_DES_KEY_SIZE], const uint8_t key2[LTC_DES_KEY_SIZE]); /*! * @brief Encrypts triple DES using CBC block mode with two keys. * * Encrypts triple DES using CBC block mode with two keys. * * @param base LTC peripheral base address * @param plaintext Input plaintext to encrypt * @param[out] ciphertext Output ciphertext * @param size Size of input and output data in bytes * @param iv Input initial vector to combine with the first plaintext block. * The iv does not need to be secret, but it must be unpredictable. * @param key1 First input key for key bundle * @param key2 Second input key for key bundle * @return Status from encrypt/decrypt operation */ status_t LTC_DES2_EncryptCbc(LTC_Type *base, const uint8_t *plaintext, uint8_t *ciphertext, uint32_t size, const uint8_t iv[LTC_DES_IV_SIZE], const uint8_t key1[LTC_DES_KEY_SIZE], const uint8_t key2[LTC_DES_KEY_SIZE]); /*! * @brief Decrypts triple DES using CBC block mode with two keys. * * Decrypts triple DES using CBC block mode with two keys. * * @param base LTC peripheral base address * @param ciphertext Input ciphertext to decrypt * @param[out] plaintext Output plaintext * @param size Size of input and output data in bytes * @param iv Input initial vector to combine with the first plaintext block. * The iv does not need to be secret, but it must be unpredictable. * @param key1 First input key for key bundle * @param key2 Second input key for key bundle * @return Status from encrypt/decrypt operation */ status_t LTC_DES2_DecryptCbc(LTC_Type *base, const uint8_t *ciphertext, uint8_t *plaintext, uint32_t size, const uint8_t iv[LTC_DES_IV_SIZE], const uint8_t key1[LTC_DES_KEY_SIZE], const uint8_t key2[LTC_DES_KEY_SIZE]); /*! * @brief Encrypts triple DES using CFB block mode with two keys. * * Encrypts triple DES using CFB block mode with two keys. * * @param base LTC peripheral base address * @param plaintext Input plaintext to encrypt * @param[out] ciphertext Output ciphertext * @param size Size of input and output data in bytes * @param iv Input initial block. * @param key1 First input key for key bundle * @param key2 Second input key for key bundle * @return Status from encrypt/decrypt operation */ status_t LTC_DES2_EncryptCfb(LTC_Type *base, const uint8_t *plaintext, uint8_t *ciphertext, uint32_t size, const uint8_t iv[LTC_DES_IV_SIZE], const uint8_t key1[LTC_DES_KEY_SIZE], const uint8_t key2[LTC_DES_KEY_SIZE]); /*! * @brief Decrypts triple DES using CFB block mode with two keys. * * Decrypts triple DES using CFB block mode with two keys. * * @param base LTC peripheral base address * @param ciphertext Input ciphertext to decrypt * @param[out] plaintext Output plaintext * @param size Size of input and output data in bytes * @param iv Input initial block. * @param key1 First input key for key bundle * @param key2 Second input key for key bundle * @return Status from encrypt/decrypt operation */ status_t LTC_DES2_DecryptCfb(LTC_Type *base, const uint8_t *ciphertext, uint8_t *plaintext, uint32_t size, const uint8_t iv[LTC_DES_IV_SIZE], const uint8_t key1[LTC_DES_KEY_SIZE], const uint8_t key2[LTC_DES_KEY_SIZE]); /*! * @brief Encrypts triple DES using OFB block mode with two keys. * * Encrypts triple DES using OFB block mode with two keys. * * @param base LTC peripheral base address * @param plaintext Input plaintext to encrypt * @param[out] ciphertext Output ciphertext * @param size Size of input and output data in bytes * @param iv Input unique input vector. The OFB mode requires that the IV be unique * for each execution of the mode under the given key. * @param key1 First input key for key bundle * @param key2 Second input key for key bundle * @return Status from encrypt/decrypt operation */ status_t LTC_DES2_EncryptOfb(LTC_Type *base, const uint8_t *plaintext, uint8_t *ciphertext, uint32_t size, const uint8_t iv[LTC_DES_IV_SIZE], const uint8_t key1[LTC_DES_KEY_SIZE], const uint8_t key2[LTC_DES_KEY_SIZE]); /*! * @brief Decrypts triple DES using OFB block mode with two keys. * * Decrypts triple DES using OFB block mode with two keys. * * @param base LTC peripheral base address * @param ciphertext Input ciphertext to decrypt * @param[out] plaintext Output plaintext * @param size Size of input and output data in bytes * @param iv Input unique input vector. The OFB mode requires that the IV be unique * for each execution of the mode under the given key. * @param key1 First input key for key bundle * @param key2 Second input key for key bundle * @return Status from encrypt/decrypt operation */ status_t LTC_DES2_DecryptOfb(LTC_Type *base, const uint8_t *ciphertext, uint8_t *plaintext, uint32_t size, const uint8_t iv[LTC_DES_IV_SIZE], const uint8_t key1[LTC_DES_KEY_SIZE], const uint8_t key2[LTC_DES_KEY_SIZE]); /*! * @brief Encrypts triple DES using ECB block mode with three keys. * * Encrypts triple DES using ECB block mode with three keys. * * @param base LTC peripheral base address * @param plaintext Input plaintext to encrypt * @param[out] ciphertext Output ciphertext * @param size Size of input and output data in bytes. Must be multiple of 8 bytes. * @param key1 First input key for key bundle * @param key2 Second input key for key bundle * @param key3 Third input key for key bundle * @return Status from encrypt/decrypt operation */ status_t LTC_DES3_EncryptEcb(LTC_Type *base, const uint8_t *plaintext, uint8_t *ciphertext, uint32_t size, const uint8_t key1[LTC_DES_KEY_SIZE], const uint8_t key2[LTC_DES_KEY_SIZE], const uint8_t key3[LTC_DES_KEY_SIZE]); /*! * @brief Decrypts triple DES using ECB block mode with three keys. * * Decrypts triple DES using ECB block mode with three keys. * * @param base LTC peripheral base address * @param ciphertext Input ciphertext to decrypt * @param[out] plaintext Output plaintext * @param size Size of input and output data in bytes. Must be multiple of 8 bytes. * @param key1 First input key for key bundle * @param key2 Second input key for key bundle * @param key3 Third input key for key bundle * @return Status from encrypt/decrypt operation */ status_t LTC_DES3_DecryptEcb(LTC_Type *base, const uint8_t *ciphertext, uint8_t *plaintext, uint32_t size, const uint8_t key1[LTC_DES_KEY_SIZE], const uint8_t key2[LTC_DES_KEY_SIZE], const uint8_t key3[LTC_DES_KEY_SIZE]); /*! * @brief Encrypts triple DES using CBC block mode with three keys. * * Encrypts triple DES using CBC block mode with three keys. * * @param base LTC peripheral base address * @param plaintext Input plaintext to encrypt * @param[out] ciphertext Output ciphertext * @param size Size of input data in bytes * @param iv Input initial vector to combine with the first plaintext block. * The iv does not need to be secret, but it must be unpredictable. * @param key1 First input key for key bundle * @param key2 Second input key for key bundle * @param key3 Third input key for key bundle * @return Status from encrypt/decrypt operation */ status_t LTC_DES3_EncryptCbc(LTC_Type *base, const uint8_t *plaintext, uint8_t *ciphertext, uint32_t size, const uint8_t iv[LTC_DES_IV_SIZE], const uint8_t key1[LTC_DES_KEY_SIZE], const uint8_t key2[LTC_DES_KEY_SIZE], const uint8_t key3[LTC_DES_KEY_SIZE]); /*! * @brief Decrypts triple DES using CBC block mode with three keys. * * Decrypts triple DES using CBC block mode with three keys. * * @param base LTC peripheral base address * @param ciphertext Input ciphertext to decrypt * @param[out] plaintext Output plaintext * @param size Size of input and output data in bytes * @param iv Input initial vector to combine with the first plaintext block. * The iv does not need to be secret, but it must be unpredictable. * @param key1 First input key for key bundle * @param key2 Second input key for key bundle * @param key3 Third input key for key bundle * @return Status from encrypt/decrypt operation */ status_t LTC_DES3_DecryptCbc(LTC_Type *base, const uint8_t *ciphertext, uint8_t *plaintext, uint32_t size, const uint8_t iv[LTC_DES_IV_SIZE], const uint8_t key1[LTC_DES_KEY_SIZE], const uint8_t key2[LTC_DES_KEY_SIZE], const uint8_t key3[LTC_DES_KEY_SIZE]); /*! * @brief Encrypts triple DES using CFB block mode with three keys. * * Encrypts triple DES using CFB block mode with three keys. * * @param base LTC peripheral base address * @param plaintext Input plaintext to encrypt * @param[out] ciphertext Output ciphertext * @param size Size of input and ouput data in bytes * @param iv Input initial block. * @param key1 First input key for key bundle * @param key2 Second input key for key bundle * @param key3 Third input key for key bundle * @return Status from encrypt/decrypt operation */ status_t LTC_DES3_EncryptCfb(LTC_Type *base, const uint8_t *plaintext, uint8_t *ciphertext, uint32_t size, const uint8_t iv[LTC_DES_IV_SIZE], const uint8_t key1[LTC_DES_KEY_SIZE], const uint8_t key2[LTC_DES_KEY_SIZE], const uint8_t key3[LTC_DES_KEY_SIZE]); /*! * @brief Decrypts triple DES using CFB block mode with three keys. * * Decrypts triple DES using CFB block mode with three keys. * * @param base LTC peripheral base address * @param ciphertext Input ciphertext to decrypt * @param[out] plaintext Output plaintext * @param size Size of input data in bytes * @param iv Input initial block. * @param key1 First input key for key bundle * @param key2 Second input key for key bundle * @param key3 Third input key for key bundle * @return Status from encrypt/decrypt operation */ status_t LTC_DES3_DecryptCfb(LTC_Type *base, const uint8_t *ciphertext, uint8_t *plaintext, uint32_t size, const uint8_t iv[LTC_DES_IV_SIZE], const uint8_t key1[LTC_DES_KEY_SIZE], const uint8_t key2[LTC_DES_KEY_SIZE], const uint8_t key3[LTC_DES_KEY_SIZE]); /*! * @brief Encrypts triple DES using OFB block mode with three keys. * * Encrypts triple DES using OFB block mode with three keys. * * @param base LTC peripheral base address * @param plaintext Input plaintext to encrypt * @param[out] ciphertext Output ciphertext * @param size Size of input and output data in bytes * @param iv Input unique input vector. The OFB mode requires that the IV be unique * for each execution of the mode under the given key. * @param key1 First input key for key bundle * @param key2 Second input key for key bundle * @param key3 Third input key for key bundle * @return Status from encrypt/decrypt operation */ status_t LTC_DES3_EncryptOfb(LTC_Type *base, const uint8_t *plaintext, uint8_t *ciphertext, uint32_t size, const uint8_t iv[LTC_DES_IV_SIZE], const uint8_t key1[LTC_DES_KEY_SIZE], const uint8_t key2[LTC_DES_KEY_SIZE], const uint8_t key3[LTC_DES_KEY_SIZE]); /*! * @brief Decrypts triple DES using OFB block mode with three keys. * * Decrypts triple DES using OFB block mode with three keys. * * @param base LTC peripheral base address * @param ciphertext Input ciphertext to decrypt * @param[out] plaintext Output plaintext * @param size Size of input and output data in bytes * @param iv Input unique input vector. The OFB mode requires that the IV be unique * for each execution of the mode under the given key. * @param key1 First input key for key bundle * @param key2 Second input key for key bundle * @param key3 Third input key for key bundle * @return Status from encrypt/decrypt operation */ status_t LTC_DES3_DecryptOfb(LTC_Type *base, const uint8_t *ciphertext, uint8_t *plaintext, uint32_t size, const uint8_t iv[LTC_DES_IV_SIZE], const uint8_t key1[LTC_DES_KEY_SIZE], const uint8_t key2[LTC_DES_KEY_SIZE], const uint8_t key3[LTC_DES_KEY_SIZE]); /*! *@} */ /******************************************************************************* * HASH API ******************************************************************************/ /*! * @addtogroup ltc_driver_hash * @{ */ /*! * @brief Initialize HASH context * * This function initialize the HASH. * Key shall be supplied if the underlaying algoritm is AES XCBC-MAC or CMAC. * Key shall be NULL if the underlaying algoritm is SHA. * * For XCBC-MAC, the key length must be 16. For CMAC, the key length can be * the AES key lengths supported by AES engine. For MDHA the key length argument * is ignored. * * @param base LTC peripheral base address * @param[out] ctx Output hash context * @param algo Underlaying algorithm to use for hash computation. * @param key Input key (NULL if underlaying algorithm is SHA) * @param keySize Size of input key in bytes * @return Status of initialization */ status_t LTC_HASH_Init(LTC_Type *base, ltc_hash_ctx_t *ctx, ltc_hash_algo_t algo, const uint8_t *key, uint32_t keySize); /*! * @brief Add data to current HASH * * Add data to current HASH. This can be called repeatedly with an arbitrary amount of data to be * hashed. * * @param[in,out] ctx HASH context * @param input Input data * @param inputSize Size of input data in bytes * @return Status of the hash update operation */ status_t LTC_HASH_Update(ltc_hash_ctx_t *ctx, const uint8_t *input, uint32_t inputSize); /*! * @brief Finalize hashing * * Outputs the final hash and erases the context. * * @param[in,out] ctx Input hash context * @param[out] output Output hash data * @param[out] outputSize Output parameter storing the size of the output hash in bytes * @return Status of the hash finish operation */ status_t LTC_HASH_Finish(ltc_hash_ctx_t *ctx, uint8_t *output, uint32_t *outputSize); /*! * @brief Create HASH on given data * * Perform the full keyed HASH in one function call. * * @param base LTC peripheral base address * @param algo Block cipher algorithm to use for CMAC creation * @param input Input data * @param inputSize Size of input data in bytes * @param key Input key * @param keySize Size of input key in bytes * @param[out] output Output hash data * @param[out] outputSize Output parameter storing the size of the output hash in bytes * @return Status of the one call hash operation. */ status_t LTC_HASH(LTC_Type *base, ltc_hash_algo_t algo, const uint8_t *input, uint32_t inputSize, const uint8_t *key, uint32_t keySize, uint8_t *output, uint32_t *outputSize); /*! *@} */ /******************************************************************************* * PKHA API ******************************************************************************/ /*! * @addtogroup ltc_driver_pkha * @{ */ /*! * @brief Compare two PKHA big numbers. * * Compare two PKHA big numbers. Return 1 for a > b, -1 for a < b and 0 if they are same. * PKHA big number is lsbyte first. Thus the comparison starts at msbyte which is the last member of tested arrays. * * @param a First integer represented as an array of bytes, lsbyte first. * @param sizeA Size in bytes of the first integer. * @param b Second integer represented as an array of bytes, lsbyte first. * @param sizeB Size in bytes of the second integer. * @return 1 if a > b. * @return -1 if a < b. * @return 0 if a = b. */ int LTC_PKHA_CompareBigNum(const uint8_t *a, size_t sizeA, const uint8_t *b, size_t sizeB); /*! * @brief Converts from integer to Montgomery format. * * This function computes R2 mod N and optionally converts A or B into Montgomery format of A or B. * * @param base LTC peripheral base address * @param N modulus * @param sizeN size of N in bytes * @param[in,out] A The first input in non-Montgomery format. Output Montgomery format of the first input. * @param[in,out] sizeA pointer to size variable. On input it holds size of input A in bytes. On output it holds size of * Montgomery format of A in bytes. * @param[in,out] B Second input in non-Montgomery format. Output Montgomery format of the second input. * @param[in,out] sizeB pointer to size variable. On input it holds size of input B in bytes. On output it holds size of * Montgomery format of B in bytes. * @param[out] R2 Output Montgomery factor R2 mod N. * @param[out] sizeR2 pointer to size variable. On output it holds size of Montgomery factor R2 mod N in bytes. * @param equalTime Run the function time equalized or no timing equalization. * @param arithType Type of arithmetic to perform (integer or F2m) * @return Operation status. */ status_t LTC_PKHA_NormalToMontgomery(LTC_Type *base, const uint8_t *N, uint16_t sizeN, uint8_t *A, uint16_t *sizeA, uint8_t *B, uint16_t *sizeB, uint8_t *R2, uint16_t *sizeR2, ltc_pkha_timing_t equalTime, ltc_pkha_f2m_t arithType); /*! * @brief Converts from Montgomery format to int. * * This function converts Montgomery format of A or B into int A or B. * * @param base LTC peripheral base address * @param N modulus. * @param sizeN size of N modulus in bytes. * @param[in,out] A Input first number in Montgomery format. Output is non-Montgomery format. * @param[in,out] sizeA pointer to size variable. On input it holds size of the input A in bytes. On output it holds * size of non-Montgomery A in bytes. * @param[in,out] B Input first number in Montgomery format. Output is non-Montgomery format. * @param[in,out] sizeB pointer to size variable. On input it holds size of the input B in bytes. On output it holds * size of non-Montgomery B in bytes. * @param equalTime Run the function time equalized or no timing equalization. * @param arithType Type of arithmetic to perform (integer or F2m) * @return Operation status. */ status_t LTC_PKHA_MontgomeryToNormal(LTC_Type *base, const uint8_t *N, uint16_t sizeN, uint8_t *A, uint16_t *sizeA, uint8_t *B, uint16_t *sizeB, ltc_pkha_timing_t equalTime, ltc_pkha_f2m_t arithType); /*! * @brief Performs modular addition - (A + B) mod N. * * This function performs modular addition of (A + B) mod N, with either * integer or binary polynomial (F2m) inputs. In the F2m form, this function is * equivalent to a bitwise XOR and it is functionally the same as subtraction. * * @param base LTC peripheral base address * @param A first addend (integer or binary polynomial) * @param sizeA Size of A in bytes * @param B second addend (integer or binary polynomial) * @param sizeB Size of B in bytes * @param N modulus. For F2m operation this can be NULL, as N is ignored during F2m polynomial addition. * @param sizeN Size of N in bytes. This must be given for both integer and F2m polynomial additions. * @param[out] result Output array to store result of operation * @param[out] resultSize Output size of operation in bytes * @param arithType Type of arithmetic to perform (integer or F2m) * @return Operation status. */ status_t LTC_PKHA_ModAdd(LTC_Type *base, const uint8_t *A, uint16_t sizeA, const uint8_t *B, uint16_t sizeB, const uint8_t *N, uint16_t sizeN, uint8_t *result, uint16_t *resultSize, ltc_pkha_f2m_t arithType); /*! * @brief Performs modular subtraction - (A - B) mod N. * * This function performs modular subtraction of (A - B) mod N with * integer inputs. * * @param base LTC peripheral base address * @param A first addend (integer or binary polynomial) * @param sizeA Size of A in bytes * @param B second addend (integer or binary polynomial) * @param sizeB Size of B in bytes * @param N modulus * @param sizeN Size of N in bytes * @param[out] result Output array to store result of operation * @param[out] resultSize Output size of operation in bytes * @return Operation status. */ status_t LTC_PKHA_ModSub1(LTC_Type *base, const uint8_t *A, uint16_t sizeA, const uint8_t *B, uint16_t sizeB, const uint8_t *N, uint16_t sizeN, uint8_t *result, uint16_t *resultSize); /*! * @brief Performs modular subtraction - (B - A) mod N. * * This function performs modular subtraction of (B - A) mod N, * with integer inputs. * * @param base LTC peripheral base address * @param A first addend (integer or binary polynomial) * @param sizeA Size of A in bytes * @param B second addend (integer or binary polynomial) * @param sizeB Size of B in bytes * @param N modulus * @param sizeN Size of N in bytes * @param[out] result Output array to store result of operation * @param[out] resultSize Output size of operation in bytes * @return Operation status. */ status_t LTC_PKHA_ModSub2(LTC_Type *base, const uint8_t *A, uint16_t sizeA, const uint8_t *B, uint16_t sizeB, const uint8_t *N, uint16_t sizeN, uint8_t *result, uint16_t *resultSize); /*! * @brief Performs modular multiplication - (A x B) mod N. * * This function performs modular multiplication with either integer or * binary polynomial (F2m) inputs. It can optionally specify whether inputs * and/or outputs will be in Montgomery form or not. * * @param base LTC peripheral base address * @param A first addend (integer or binary polynomial) * @param sizeA Size of A in bytes * @param B second addend (integer or binary polynomial) * @param sizeB Size of B in bytes * @param N modulus. * @param sizeN Size of N in bytes * @param[out] result Output array to store result of operation * @param[out] resultSize Output size of operation in bytes * @param arithType Type of arithmetic to perform (integer or F2m) * @param montIn Format of inputs * @param montOut Format of output * @param equalTime Run the function time equalized or no timing equalization. This argument is ignored for F2m modular * multiplication. * @return Operation status. */ status_t LTC_PKHA_ModMul(LTC_Type *base, const uint8_t *A, uint16_t sizeA, const uint8_t *B, uint16_t sizeB, const uint8_t *N, uint16_t sizeN, uint8_t *result, uint16_t *resultSize, ltc_pkha_f2m_t arithType, ltc_pkha_montgomery_form_t montIn, ltc_pkha_montgomery_form_t montOut, ltc_pkha_timing_t equalTime); /*! * @brief Performs modular exponentiation - (A^E) mod N. * * This function performs modular exponentiation with either integer or * binary polynomial (F2m) inputs. * * @param base LTC peripheral base address * @param A first addend (integer or binary polynomial) * @param sizeA Size of A in bytes * @param N modulus * @param sizeN Size of N in bytes * @param E exponent * @param sizeE Size of E in bytes * @param[out] result Output array to store result of operation * @param[out] resultSize Output size of operation in bytes * @param montIn Format of A input (normal or Montgomery) * @param arithType Type of arithmetic to perform (integer or F2m) * @param equalTime Run the function time equalized or no timing equalization. * @return Operation status. */ status_t LTC_PKHA_ModExp(LTC_Type *base, const uint8_t *A, uint16_t sizeA, const uint8_t *N, uint16_t sizeN, const uint8_t *E, uint16_t sizeE, uint8_t *result, uint16_t *resultSize, ltc_pkha_f2m_t arithType, ltc_pkha_montgomery_form_t montIn, ltc_pkha_timing_t equalTime); /*! * @brief Performs modular reduction - (A) mod N. * * This function performs modular reduction with either integer or * binary polynomial (F2m) inputs. * * @param base LTC peripheral base address * @param A first addend (integer or binary polynomial) * @param sizeA Size of A in bytes * @param N modulus * @param sizeN Size of N in bytes * @param[out] result Output array to store result of operation * @param[out] resultSize Output size of operation in bytes * @param arithType Type of arithmetic to perform (integer or F2m) * @return Operation status. */ status_t LTC_PKHA_ModRed(LTC_Type *base, const uint8_t *A, uint16_t sizeA, const uint8_t *N, uint16_t sizeN, uint8_t *result, uint16_t *resultSize, ltc_pkha_f2m_t arithType); /*! * @brief Performs modular inversion - (A^-1) mod N. * * This function performs modular inversion with either integer or * binary polynomial (F2m) inputs. * * @param base LTC peripheral base address * @param A first addend (integer or binary polynomial) * @param sizeA Size of A in bytes * @param N modulus * @param sizeN Size of N in bytes * @param[out] result Output array to store result of operation * @param[out] resultSize Output size of operation in bytes * @param arithType Type of arithmetic to perform (integer or F2m) * @return Operation status. */ status_t LTC_PKHA_ModInv(LTC_Type *base, const uint8_t *A, uint16_t sizeA, const uint8_t *N, uint16_t sizeN, uint8_t *result, uint16_t *resultSize, ltc_pkha_f2m_t arithType); /*! * @brief Computes integer Montgomery factor R^2 mod N. * * This function computes a constant to assist in converting operands * into the Montgomery residue system representation. * * @param base LTC peripheral base address * @param N modulus * @param sizeN Size of N in bytes * @param[out] result Output array to store result of operation * @param[out] resultSize Output size of operation in bytes * @param arithType Type of arithmetic to perform (integer or F2m) * @return Operation status. */ status_t LTC_PKHA_ModR2( LTC_Type *base, const uint8_t *N, uint16_t sizeN, uint8_t *result, uint16_t *resultSize, ltc_pkha_f2m_t arithType); /*! * @brief Calculates the greatest common divisor - GCD (A, N). * * This function calculates the greatest common divisor of two inputs with * either integer or binary polynomial (F2m) inputs. * * @param base LTC peripheral base address * @param A first value (must be smaller than or equal to N) * @param sizeA Size of A in bytes * @param N second value (must be non-zero) * @param sizeN Size of N in bytes * @param[out] result Output array to store result of operation * @param[out] resultSize Output size of operation in bytes * @param arithType Type of arithmetic to perform (integer or F2m) * @return Operation status. */ status_t LTC_PKHA_GCD(LTC_Type *base, const uint8_t *A, uint16_t sizeA, const uint8_t *N, uint16_t sizeN, uint8_t *result, uint16_t *resultSize, ltc_pkha_f2m_t arithType); /*! * @brief Executes Miller-Rabin primality test. * * This function calculates whether or not a candidate prime number is likely * to be a prime. * * @param base LTC peripheral base address * @param A initial random seed * @param sizeA Size of A in bytes * @param B number of trial runs * @param sizeB Size of B in bytes * @param N candidate prime integer * @param sizeN Size of N in bytes * @param[out] res True if the value is likely prime or false otherwise * @return Operation status. */ status_t LTC_PKHA_PrimalityTest(LTC_Type *base, const uint8_t *A, uint16_t sizeA, const uint8_t *B, uint16_t sizeB, const uint8_t *N, uint16_t sizeN, bool *res); /*! * @brief Adds elliptic curve points - A + B. * * This function performs ECC point addition over a prime field (Fp) or binary field (F2m) using * affine coordinates. * * @param base LTC peripheral base address * @param A Left-hand point * @param B Right-hand point * @param N Prime modulus of the field * @param R2modN NULL (the function computes R2modN internally) or pointer to pre-computed R2modN (obtained from * LTC_PKHA_ModR2() function). * @param aCurveParam A parameter from curve equation * @param bCurveParam B parameter from curve equation (constant) * @param size Size in bytes of curve points and parameters * @param arithType Type of arithmetic to perform (integer or F2m) * @param[out] result Result point * @return Operation status. */ status_t LTC_PKHA_ECC_PointAdd(LTC_Type *base, const ltc_pkha_ecc_point_t *A, const ltc_pkha_ecc_point_t *B, const uint8_t *N, const uint8_t *R2modN, const uint8_t *aCurveParam, const uint8_t *bCurveParam, uint8_t size, ltc_pkha_f2m_t arithType, ltc_pkha_ecc_point_t *result); /*! * @brief Doubles elliptic curve points - B + B. * * This function performs ECC point doubling over a prime field (Fp) or binary field (F2m) using * affine coordinates. * * @param base LTC peripheral base address * @param B Point to double * @param N Prime modulus of the field * @param aCurveParam A parameter from curve equation * @param bCurveParam B parameter from curve equation (constant) * @param size Size in bytes of curve points and parameters * @param arithType Type of arithmetic to perform (integer or F2m) * @param[out] result Result point * @return Operation status. */ status_t LTC_PKHA_ECC_PointDouble(LTC_Type *base, const ltc_pkha_ecc_point_t *B, const uint8_t *N, const uint8_t *aCurveParam, const uint8_t *bCurveParam, uint8_t size, ltc_pkha_f2m_t arithType, ltc_pkha_ecc_point_t *result); /*! * @brief Multiplies an elliptic curve point by a scalar - E x (A0, A1). * * This function performs ECC point multiplication to multiply an ECC point by * a scalar integer multiplier over a prime field (Fp) or a binary field (F2m). * * @param base LTC peripheral base address * @param A Point as multiplicand * @param E Scalar multiple * @param sizeE The size of E, in bytes * @param N Modulus, a prime number for the Fp field or Irreducible polynomial for F2m field. * @param R2modN NULL (the function computes R2modN internally) or pointer to pre-computed R2modN (obtained from * LTC_PKHA_ModR2() function). * @param aCurveParam A parameter from curve equation * @param bCurveParam B parameter from curve equation (C parameter for operation over F2m). * @param size Size in bytes of curve points and parameters * @param equalTime Run the function time equalized or no timing equalization. * @param arithType Type of arithmetic to perform (integer or F2m) * @param[out] result Result point * @param[out] infinity Output true if the result is point of infinity, and false otherwise. Writing of this output will * be ignored if the argument is NULL. * @return Operation status. */ status_t LTC_PKHA_ECC_PointMul(LTC_Type *base, const ltc_pkha_ecc_point_t *A, const uint8_t *E, uint8_t sizeE, const uint8_t *N, const uint8_t *R2modN, const uint8_t *aCurveParam, const uint8_t *bCurveParam, uint8_t size, ltc_pkha_timing_t equalTime, ltc_pkha_f2m_t arithType, ltc_pkha_ecc_point_t *result, bool *infinity); /*! *@} */ #if defined(__cplusplus) } #endif /*! *@} */ #endif /* _FSL_LTC_H_ */