![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
mbed-os/targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_K82F/drivers/fsl_flexio_i2s_edma.c
- Committer:
- kadonotakashi
- Date:
- 2018-10-11
- Revision:
- 3:f3764f852aa8
- Parent:
- 0:8fdf9a60065b
File content as of revision 3:f3764f852aa8:
/* * Copyright (c) 2015, Freescale Semiconductor, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * o Redistributions of source code must retain the above copyright notice, this list * of conditions and the following disclaimer. * * o Redistributions in binary form must reproduce the above copyright notice, this * list of conditions and the following disclaimer in the documentation and/or * other materials provided with the distribution. * * o Neither the name of Freescale Semiconductor, Inc. nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "fsl_flexio_i2s_edma.h" /******************************************************************************* * Definitations ******************************************************************************/ /* Used for 32byte aligned */ #define STCD_ADDR(address) (edma_tcd_t *)(((uint32_t)address + 32) & ~0x1FU) /*<! Structure definition for flexio_i2s_edma_private_handle_t. The structure is private. */ typedef struct _flexio_i2s_edma_private_handle { FLEXIO_I2S_Type *base; flexio_i2s_edma_handle_t *handle; } flexio_i2s_edma_private_handle_t; enum _flexio_i2s_edma_transfer_state { kFLEXIO_I2S_Busy = 0x0U, /*!< FLEXIO I2S is busy */ kFLEXIO_I2S_Idle, /*!< Transfer is done. */ }; /*<! Private handle only used for internally. */ static flexio_i2s_edma_private_handle_t s_edmaPrivateHandle[2]; /******************************************************************************* * Prototypes ******************************************************************************/ /*! * @brief FLEXIO I2S EDMA callback for send. * * @param handle pointer to flexio_i2s_edma_handle_t structure which stores the transfer state. * @param userData Parameter for user callback. * @param done If the DMA transfer finished. * @param tcds The TCD index. */ static void FLEXIO_I2S_TxEDMACallback(edma_handle_t *handle, void *userData, bool done, uint32_t tcds); /*! * @brief FLEXIO I2S EDMA callback for receive. * * @param handle pointer to flexio_i2s_edma_handle_t structure which stores the transfer state. * @param userData Parameter for user callback. * @param done If the DMA transfer finished. * @param tcds The TCD index. */ static void FLEXIO_I2S_RxEDMACallback(edma_handle_t *handle, void *userData, bool done, uint32_t tcds); /******************************************************************************* * Code ******************************************************************************/ static void FLEXIO_I2S_TxEDMACallback(edma_handle_t *handle, void *userData, bool done, uint32_t tcds) { flexio_i2s_edma_private_handle_t *privHandle = (flexio_i2s_edma_private_handle_t *)userData; flexio_i2s_edma_handle_t *flexio_i2sHandle = privHandle->handle; /* If finished a blcok, call the callback function */ memset(&flexio_i2sHandle->queue[flexio_i2sHandle->queueDriver], 0, sizeof(flexio_i2s_transfer_t)); flexio_i2sHandle->queueDriver = (flexio_i2sHandle->queueDriver + 1) % FLEXIO_I2S_XFER_QUEUE_SIZE; if (flexio_i2sHandle->callback) { (flexio_i2sHandle->callback)(privHandle->base, flexio_i2sHandle, kStatus_Success, flexio_i2sHandle->userData); } /* If all data finished, just stop the transfer */ if (flexio_i2sHandle->queue[flexio_i2sHandle->queueDriver].data == NULL) { FLEXIO_I2S_TransferAbortSendEDMA(privHandle->base, flexio_i2sHandle); } } static void FLEXIO_I2S_RxEDMACallback(edma_handle_t *handle, void *userData, bool done, uint32_t tcds) { flexio_i2s_edma_private_handle_t *privHandle = (flexio_i2s_edma_private_handle_t *)userData; flexio_i2s_edma_handle_t *flexio_i2sHandle = privHandle->handle; /* If finished a blcok, call the callback function */ memset(&flexio_i2sHandle->queue[flexio_i2sHandle->queueDriver], 0, sizeof(flexio_i2s_transfer_t)); flexio_i2sHandle->queueDriver = (flexio_i2sHandle->queueDriver + 1) % FLEXIO_I2S_XFER_QUEUE_SIZE; if (flexio_i2sHandle->callback) { (flexio_i2sHandle->callback)(privHandle->base, flexio_i2sHandle, kStatus_Success, flexio_i2sHandle->userData); } /* If all data finished, just stop the transfer */ if (flexio_i2sHandle->queue[flexio_i2sHandle->queueDriver].data == NULL) { FLEXIO_I2S_TransferAbortReceiveEDMA(privHandle->base, flexio_i2sHandle); } } void FLEXIO_I2S_TransferTxCreateHandleEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, flexio_i2s_edma_callback_t callback, void *userData, edma_handle_t *dmaHandle) { assert(handle && dmaHandle); /* Set flexio_i2s base to handle */ handle->dmaHandle = dmaHandle; handle->callback = callback; handle->userData = userData; /* Set FLEXIO I2S state to idle */ handle->state = kFLEXIO_I2S_Idle; s_edmaPrivateHandle[0].base = base; s_edmaPrivateHandle[0].handle = handle; /* Need to use scatter gather */ EDMA_InstallTCDMemory(dmaHandle, STCD_ADDR(handle->tcd), FLEXIO_I2S_XFER_QUEUE_SIZE); /* Install callback for Tx dma channel */ EDMA_SetCallback(dmaHandle, FLEXIO_I2S_TxEDMACallback, &s_edmaPrivateHandle[0]); } void FLEXIO_I2S_TransferRxCreateHandleEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, flexio_i2s_edma_callback_t callback, void *userData, edma_handle_t *dmaHandle) { assert(handle && dmaHandle); /* Set flexio_i2s base to handle */ handle->dmaHandle = dmaHandle; handle->callback = callback; handle->userData = userData; /* Set FLEXIO I2S state to idle */ handle->state = kFLEXIO_I2S_Idle; s_edmaPrivateHandle[1].base = base; s_edmaPrivateHandle[1].handle = handle; /* Need to use scatter gather */ EDMA_InstallTCDMemory(dmaHandle, STCD_ADDR(handle->tcd), FLEXIO_I2S_XFER_QUEUE_SIZE); /* Install callback for Tx dma channel */ EDMA_SetCallback(dmaHandle, FLEXIO_I2S_RxEDMACallback, &s_edmaPrivateHandle[1]); } void FLEXIO_I2S_TransferSetFormatEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, flexio_i2s_format_t *format, uint32_t srcClock_Hz) { assert(handle && format); /* Configure the audio format to FLEXIO I2S registers */ if (srcClock_Hz != 0) { /* It is master */ FLEXIO_I2S_MasterSetFormat(base, format, srcClock_Hz); } else { FLEXIO_I2S_SlaveSetFormat(base, format); } /* Get the tranfer size from format, this should be used in EDMA configuration */ handle->bytesPerFrame = format->bitWidth / 8U; } status_t FLEXIO_I2S_TransferSendEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, flexio_i2s_transfer_t *xfer) { assert(handle && xfer); edma_transfer_config_t config = {0}; uint32_t destAddr = FLEXIO_I2S_TxGetDataRegisterAddress(base) + (4U - handle->bytesPerFrame); /* Check if input parameter invalid */ if ((xfer->data == NULL) || (xfer->dataSize == 0U)) { return kStatus_InvalidArgument; } if (handle->queue[handle->queueUser].data) { return kStatus_FLEXIO_I2S_QueueFull; } /* Change the state of handle */ handle->state = kFLEXIO_I2S_Busy; /* Update the queue state */ handle->queue[handle->queueUser].data = xfer->data; handle->queue[handle->queueUser].dataSize = xfer->dataSize; handle->transferSize[handle->queueUser] = xfer->dataSize; handle->queueUser = (handle->queueUser + 1) % FLEXIO_I2S_XFER_QUEUE_SIZE; /* Prepare edma configure */ EDMA_PrepareTransfer(&config, xfer->data, handle->bytesPerFrame, (void *)destAddr, handle->bytesPerFrame, handle->bytesPerFrame, xfer->dataSize, kEDMA_MemoryToPeripheral); /* Store the initially configured eDMA minor byte transfer count into the FLEXIO I2S handle */ handle->nbytes = handle->bytesPerFrame; EDMA_SubmitTransfer(handle->dmaHandle, &config); /* Start DMA transfer */ EDMA_StartTransfer(handle->dmaHandle); /* Enable DMA enable bit */ FLEXIO_I2S_TxEnableDMA(base, true); /* Enable FLEXIO I2S Tx clock */ FLEXIO_I2S_Enable(base, true); return kStatus_Success; } status_t FLEXIO_I2S_TransferReceiveEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, flexio_i2s_transfer_t *xfer) { assert(handle && xfer); edma_transfer_config_t config = {0}; uint32_t srcAddr = FLEXIO_I2S_RxGetDataRegisterAddress(base) + (4U - handle->bytesPerFrame); /* Check if input parameter invalid */ if ((xfer->data == NULL) || (xfer->dataSize == 0U)) { return kStatus_InvalidArgument; } if (handle->queue[handle->queueUser].data) { return kStatus_FLEXIO_I2S_QueueFull; } /* Change the state of handle */ handle->state = kFLEXIO_I2S_Busy; /* Update queue state */ handle->queue[handle->queueUser].data = xfer->data; handle->queue[handle->queueUser].dataSize = xfer->dataSize; handle->transferSize[handle->queueUser] = xfer->dataSize; handle->queueUser = (handle->queueUser + 1) % FLEXIO_I2S_XFER_QUEUE_SIZE; /* Prepare edma configure */ EDMA_PrepareTransfer(&config, (void *)srcAddr, handle->bytesPerFrame, xfer->data, handle->bytesPerFrame, handle->bytesPerFrame, xfer->dataSize, kEDMA_PeripheralToMemory); /* Store the initially configured eDMA minor byte transfer count into the FLEXIO I2S handle */ handle->nbytes = handle->bytesPerFrame; EDMA_SubmitTransfer(handle->dmaHandle, &config); /* Start DMA transfer */ EDMA_StartTransfer(handle->dmaHandle); /* Enable DMA enable bit */ FLEXIO_I2S_RxEnableDMA(base, true); /* Enable FLEXIO I2S Rx clock */ FLEXIO_I2S_Enable(base, true); return kStatus_Success; } void FLEXIO_I2S_TransferAbortSendEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle) { assert(handle); /* Disable dma */ EDMA_AbortTransfer(handle->dmaHandle); /* Disable DMA enable bit */ FLEXIO_I2S_TxEnableDMA(base, false); /* Set the handle state */ handle->state = kFLEXIO_I2S_Idle; } void FLEXIO_I2S_TransferAbortReceiveEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle) { assert(handle); /* Disable dma */ EDMA_AbortTransfer(handle->dmaHandle); /* Disable DMA enable bit */ FLEXIO_I2S_RxEnableDMA(base, false); /* Set the handle state */ handle->state = kFLEXIO_I2S_Idle; } status_t FLEXIO_I2S_TransferGetSendCountEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, size_t *count) { assert(handle); status_t status = kStatus_Success; if (handle->state != kFLEXIO_I2S_Busy) { status = kStatus_NoTransferInProgress; } else { *count = handle->transferSize[handle->queueDriver] - (uint32_t)handle->nbytes * EDMA_GetRemainingMajorLoopCount(handle->dmaHandle->base, handle->dmaHandle->channel); } return status; } status_t FLEXIO_I2S_TransferGetReceiveCountEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, size_t *count) { assert(handle); status_t status = kStatus_Success; if (handle->state != kFLEXIO_I2S_Busy) { status = kStatus_NoTransferInProgress; } else { *count = handle->transferSize[handle->queueDriver] - (uint32_t)handle->nbytes * EDMA_GetRemainingMajorLoopCount(handle->dmaHandle->base, handle->dmaHandle->channel); } return status; }