![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
mbed-os/targets/TARGET_NUVOTON/TARGET_M2351/device/Reg/gpio_reg.h
- Committer:
- kadonotakashi
- Date:
- 2018-10-10
- Revision:
- 0:8fdf9a60065b
File content as of revision 0:8fdf9a60065b:
/**************************************************************************//** * @file gpio_reg.h * @version V1.00 * @brief GPIO register definition header file * * @copyright (C) 2017 Nuvoton Technology Corp. All rights reserved. *****************************************************************************/ #ifndef __GPIO_REG_H__ #define __GPIO_REG_H__ /*---------------------- General Purpose Input/Output Controller -------------------------*/ /** @addtogroup GPIO General Purpose Input/Output Controller(GPIO) Memory Mapped Structure for GPIO Controller @{ */ typedef struct { /** * @var GPIO_T::MODE * Offset: 0x00/0x40/0x80/0xC0/0x100/0x140/0x180/0x1C0 PA-H I/O Mode Control * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[2n+1:2n]|MODEn |Port A-H I/O Pin[n] Mode Control * | | |Determine each I/O mode of Px.n pins. * | | |00 = Px.n is in Input mode. * | | |01 = Px.n is in Push-pull Output mode. * | | |10 = Px.n is in Open-drain Output mode. * | | |11 = Px.n is in Quasi-bidirectional mode. * | | |Note1: The initial value of this field is defined by CIOINI (CONFIG0 [10]). * | | |If CIOINI is set to 0, the default value is 0xFFFF_FFFF and all pins will be quasi-bidirectional mode after chip powered on. * | | |If CIOINI is set to 1, the default value is 0x0000_0000 and all pins will be input mode after chip powered on. * | | |Note2: * | | |Max. n=15 for port A/B/E. * | | |Max. n=13 for port C. The PC.14/ PC.15 is ignored. * | | |Max. n=14 for port D. The PD.15 is ignored. * | | |Max. n=12 for port F. The PF.12/ PF.13/ PF.14/ PF.15 is ignored. * | | |Max. n=15 for port G. The PG.0/ PG.1/ PG.5/ PG.6/ PG.7/ PG.8 is ignored. * | | |Max. n=11 for port H. The PH.0/ PH.1/ PH.2/ PH.3/ PH.12/ PH.13/ PH.14/ PH.15 is ignored. * @var GPIO_T::DINOFF * Offset: 0x04/0x44/0x84/0xC4/0x104/0x144/0x184/0x1C4 PA-H Digital Input Path Disable Control * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[n+16] |DINOFFn |Port A-H Pin[n] Digital Input Path Disable Control * | | |Each of these bits is used to control if the digital input path of corresponding Px.n pin is disabled. * | | |If input is analog signal, users can disable Px.n digital input path to avoid input current leakage. * | | |0 = Px.n digital input path Enabled. * | | |1 = Px.n digital input path Disabled (digital input tied to low). * | | |Note: * | | |Max. n=15 for port A/B/E. * | | |Max. n=13 for port C. The PC.14/ PC.15 is ignored. * | | |Max. n=14 for port D. The PD.15 is ignored. * | | |Max. n=12 for port F. The PF.12/ PF.13/ PF.14/ PF.15 is ignored. * | | |Max. n=15 for port G. The PG.0/ PG.1/ PG.5/ PG.6/ PG.7/ PG.8 is ignored. * | | |Max. n=11 for port H. The PH.0/ PH.1/ PH.2/ PH.3/ PH.12/ PH.13/ PH.14/ PH.15 is ignored. * @var GPIO_T::DOUT * Offset: 0x08/0x48/0x88/0xC8/0x108/0x148/0x188/0x1C8 PA-H Data Output Value * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[n] |DOUTn |Port A-H Pin[n] Output Value * | | |Each of these bits controls the status of a Px.n pin when the Px.n is configured as Push-pull output, Open-drain output or Quasi-bidirectional mode. * | | |0 = Px.n will drive Low if the Px.n pin is configured as Push-pull output, Open-drain output or Quasi-bidirectional mode. * | | |1 = Px.n will drive High if the Px.n pin is configured as Push-pull output or Quasi-bidirectional mode. * | | |Note: * | | |Max. n=15 for port A/B/E. * | | |Max. n=13 for port C. The PC.14/ PC.15 is ignored. * | | |Max. n=14 for port D. The PD.15 is ignored. * | | |Max. n=12 for port F. The PF.12/ PF.13/ PF.14/ PF.15 is ignored. * | | |Max. n=15 for port G. The PG.0/ PG.1/ PG.5/ PG.6/ PG.7/ PG.8 is ignored. * | | |Max. n=11 for port H. The PH.0/ PH.1/ PH.2/ PH.3/ PH.12/ PH.13/ PH.14/ PH.15 is ignored. * @var GPIO_T::DATMSK * Offset: 0x0C/0x4C/0x8C/0xCC/0x10C/0x14C/0x18C/0x1CC PA-H Data Output Write Mask * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[n] |DATMSKn |Port A-H Pin[n] Data Output Write Mask * | | |These bits are used to protect the corresponding DOUT (Px_DOUT[n]) bit * | | |When the DATMSK (Px_DATMSK[n]) bit is set to 1, the corresponding DOUT (Px_DOUT[n]) bit is protected * | | |If the write signal is masked, writing data to the protect bit is ignored. * | | |0 = Corresponding DOUT (Px_DOUT[n]) bit can be updated. * | | |1 = Corresponding DOUT (Px_DOUT[n]) bit protected. * | | |Note1: This function only protects the corresponding DOUT (Px_DOUT[n]) bit, and will not protect the corresponding PDIO (Pxn_PDIO[0]) bit. * | | |Note2: * | | |Max. n=15 for port A/B/E. * | | |Max. n=13 for port C. The PC.14/ PC.15 is ignored. * | | |Max. n=14 for port D. The PD.15 is ignored. * | | |Max. n=12 for port F. The PF.12/ PF.13/ PF.14/ PF.15 is ignored. * | | |Max. n=15 for port G. The PG.0/ PG.1/ PG.5/ PG.6/ PG.7/ PG.8 is ignored. * | | |Max. n=11 for port H. The PH.0/ PH.1/ PH.2/ PH.3/ PH.12/ PH.13/ PH.14/ PH.15 is ignored. * @var GPIO_T::PIN * Offset: 0x10/0x50/0x90/0xD0/0x110/0x150/0x190/0x1D0 PA-H Pin Value * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[n] |PINn |Port A-H Pin[n] Pin Value * | | |Each bit of the register reflects the actual status of the respective Px.n pin * | | |If the bit is 1, it indicates the corresponding pin status is high; else the pin status is low. * | | |Note: * | | |Max. n=15 for port A/B/E. * | | |Max. n=13 for port C. The PC.14/ PC.15 is ignored. * | | |Max. n=14 for port D. The PD.15 is ignored. * | | |Max. n=12 for port F. The PF.12/ PF.13/ PF.14/ PF.15 is ignored. * | | |Max. n=15 for port G. The PG.0/ PG.1/ PG.5/ PG.6/ PG.7/ PG.8 is ignored. * | | |Max. n=11 for port H. The PH.0/ PH.1/ PH.2/ PH.3/ PH.12/ PH.13/ PH.14/ PH.15 is ignored. * @var GPIO_T::DBEN * Offset: 0x14/0x54/0x94/0xD4/0x114/0x154/0x194/0x1D4 PA-H De-Bounce Enable Control * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[n] |DBENn |Port A-H Pin[n] Input Signal De-bounce Enable Bit * | | |The DBEN[n] bit is used to enable the de-bounce function for each corresponding bit * | | |If the input signal pulse width cannot be sampled by continuous two de-bounce sample cycle, the input signal transition is seen as the signal bounce and will not trigger the interrupt * | | |The de-bounce clock source is controlled by DBCLKSRC (Px_DBCTL [4]), one de-bounce sample cycle period is controlled by DBCLKSEL (Px_DBCTL [3:0]). * | | |0 = Px.n de-bounce function Disabled. * | | |1 = Px.n de-bounce function Enabled. * | | |The de-bounce function is valid only for edge triggered interrupt * | | |If the interrupt mode is level triggered, the de-bounce enable bit is ignored. * | | |Note: * | | |Max. n=15 for port A/B/E. * | | |Max. n=13 for port C. The PC.14/ PC.15 is ignored. * | | |Max. n=14 for port D. The PD.15 is ignored. * | | |Max. n=12 for port F. The PF.12/ PF.13/ PF.14/ PF.15 is ignored. * | | |Max. n=15 for port G. The PG.0/ PG.1/ PG.5/ PG.6/ PG.7/ PG.8 is ignored. * | | |Max. n=11 for port H. The PH.0/ PH.1/ PH.2/ PH.3/ PH.12/ PH.13/ PH.14/ PH.15 is ignored. * @var GPIO_T::INTTYPE * Offset: 0x18/0x58/0x98/0xD8/0x118/0x158/0x198/0x1D8 PA-H Interrupt Trigger Type Control * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[n] |TYPEn |Port A-H Pin[n] Edge or Level Detection Interrupt Trigger Type Control * | | |TYPE (Px_INTTYPE[n]) bit is used to control the triggered interrupt is by level trigger or by edge trigger * | | |If the interrupt is by edge trigger, the trigger source can be controlled by de-bounce * | | |If the interrupt is by level trigger, the input source is sampled by one HCLK clock and generates the interrupt. * | | |0 = Edge trigger interrupt. * | | |1 = Level trigger interrupt. * | | |If the pin is set as the level trigger interrupt, only one level can be set on the registers RHIEN (Px_INTEN[n+16])/FLIEN (Px_INTEN[n]) * | | |If both levels to trigger interrupt are set, the setting is ignored and no interrupt will occur. * | | |The de-bounce function is valid only for edge triggered interrupt * | | |If the interrupt mode is level triggered, the de-bounce enable bit is ignored. * | | |Note: * | | |Max. n=15 for port A/B/E. * | | |Max. n=13 for port C. The PC.14/ PC.15 is ignored. * | | |Max. n=14 for port D. The PD.15 is ignored. * | | |Max. n=12 for port F. The PF.12/ PF.13/ PF.14/ PF.15 is ignored. * | | |Max. n=15 for port G. The PG.0/ PG.1/ PG.5/ PG.6/ PG.7/ PG.8 is ignored. * | | |Max. n=11 for port H. The PH.0/ PH.1/ PH.2/ PH.3/ PH.12/ PH.13/ PH.14/ PH.15 is ignored. * @var GPIO_T::INTEN * Offset: 0x1C/0x5C/0x9C/0xDC/0x11C/0x15C/0x19C/0x1DC PA-H Interrupt Enable Control * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[n] |FLIENn |Port A-H Pin[n] Falling Edge or Low Level Interrupt Trigger Type Enable Bit * | | |The FLIEN (Px_INTEN[n]) bit is used to enable the interrupt for each of the corresponding input Px.n pin * | | |Set bit to 1 also enable the pin wake-up function. * | | |When setting the FLIEN (Px_INTEN[n]) bit to 1 : * | | |If the interrupt is level trigger (TYPE (Px_INTTYPE[n]) bit is set to 1), the input Px.n pin will generate the interrupt while this pin state is at low level. * | | |If the interrupt is edge trigger(TYPE (Px_INTTYPE[n]) bit is set to 0), the input Px.n pin will generate the interrupt while this pin state changed from high to low. * | | |0 = Px.n level low or high to low interrupt Disabled. * | | |1 = Px.n level low or high to low interrupt Enabled. * | | |Note: * | | |Max. n=15 for port A/B/E. * | | |Max. n=13 for port C. The PC.14/ PC.15 is ignored. * | | |Max. n=14 for port D. The PD.15 is ignored. * | | |Max. n=12 for port F. The PF.12/ PF.13/ PF.14/ PF.15 is ignored. * | | |Max. n=15 for port G. The PG.0/ PG.1/ PG.5/ PG.6/ PG.7/ PG.8 is ignored. * | | |Max. n=11 for port H. The PH.0/ PH.1/ PH.2/ PH.3/ PH.12/ PH.13/ PH.14/ PH.15 is ignored. * |[n+16] |RHIENn |Port A-G Pin[n] Rising Edge or High Level Interrupt Trigger Type Enable Bit * | | |The RHIEN (Px_INTEN[n+16]) bit is used to enable the interrupt for each of the corresponding input Px.n pin * | | |Set bit to 1 also enable the pin wake-up function. * | | |When setting the RHIEN (Px_INTEN[n+16]) bit to 1 : * | | |If the interrupt is level trigger (TYPE (Px_INTTYPE[n]) bit is set to 1), the input Px.n pin will generate the interrupt while this pin state is at high level. * | | |If the interrupt is edge trigger (TYPE (Px_INTTYPE[n]) bit is set to 0), the input Px.n pin will generate the interrupt while this pin state changed from low to high. * | | |0 = Px.n level high or low to high interrupt Disabled. * | | |1 = Px.n level high or low to high interrupt Enabled. * | | |Note: * | | |Max. n=15 for port A/B/E. * | | |Max. n=13 for port C. The PC.14/ PC.15 is ignored. * | | |Max. n=14 for port D. The PD.15 is ignored. * | | |Max. n=12 for port F. The PF.12/ PF.13/ PF.14/ PF.15 is ignored. * | | |Max. n=15 for port G. The PG.0/ PG.1/ PG.5/ PG.6/ PG.7/ PG.8 is ignored. * | | |Max. n=11 for port H. The PH.0/ PH.1/ PH.2/ PH.3/ PH.12/ PH.13/ PH.14/ PH.15 is ignored. * @var GPIO_T::INTSRC * Offset: 0x20/0x60/0xA0/0xE0/0x120/0x160/0x1A0/0x1E0 PA-H Interrupt Source Flag * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[n] |INTSRCn |Port A-H Pin[n] Interrupt Source Flag * | | |Write Operation : * | | |0 = No action. * | | |1 = Clear the corresponding pending interrupt. * | | |Read Operation : * | | |0 = No interrupt at Px.n. * | | |1 = Px.n generates an interrupt. * | | |Note: * | | |Max. n=15 for port A/B/E. * | | |Max. n=13 for port C. The PC.14/ PC.15 is ignored. * | | |Max. n=14 for port D. The PD.15 is ignored. * | | |Max. n=12 for port F. The PF.12/ PF.13/ PF.14/ PF.15 is ignored. * | | |Max. n=15 for port G. The PG.0/ PG.1/ PG.5/ PG.6/ PG.7/ PG.8 is ignored. * | | |Max. n=11 for port H. The PH.0/ PH.1/ PH.2/ PH.3/ PH.12/ PH.13/ PH.14/ PH.15 is ignored. * @var GPIO_T::SMTEN * Offset: 0x24/0x64/0xA4/0xE4/0x124/0x164/0x1A4/0x1E4 PA-H Input Schmitt Trigger Enable * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[n] |SMTENn |Port A-H Pin[n] Input Schmitt Trigger Enable Bit * | | |0 = Px.n input Schmitt trigger function Disabled. * | | |1 = Px.n input Schmitt trigger function Enabled. * | | |Note: * | | |Max. n=15 for port A/B/E. * | | |Max. n=13 for port C. The PC.14/ PC.15 is ignored. * | | |Max. n=14 for port D. The PD.15 is ignored. * | | |Max. n=12 for port F. The PF.12/ PF.13/ PF.14/ PF.15 is ignored. * | | |Max. n=15 for port G. The PG.0/ PG.1/ PG.5/ PG.6/ PG.7/ PG.8 is ignored. * | | |Max. n=11 for port H. The PH.0/ PH.1/ PH.2/ PH.3/ PH.12/ PH.13/ PH.14/ PH.15 is ignored. * @var GPIO_T::SLEWCTL * Offset: 0x28/0x68/0xA8/0xE8/0x128/0x168/0x1A8/0x1E8 PA-H High Slew Rate Control * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[2n+1:2n]|HSRENn |Port A-H Pin[n] High Slew Rate Control * | | |00 = Px.n output with normal slew rate mode (maximum 40 MHz at 2.7V). * | | |01 = Px.n output with high slew rate mode (maximum 80 MHz at 2.7V). * | | |10 = Px.n output with fast slew rate mode (maximum 100 MHz at 2.7V. * | | |11 = Reserved. * | | |Note: * | | |Max. n=15 for port A/B/E. * | | |Max. n=13 for port C. The PC.14/ PC.15 is ignored. * | | |Max. n=14 for port D. The PD.15 is ignored. * | | |Max. n=12 for port F. The PF.12/ PF.13/ PF.14/ PF.15 is ignored. * | | |Max. n=15 for port G. The PG.0/ PG.1/ PG.5/ PG.6/ PG.7/ PG.8 is ignored. * | | |Max. n=11 for port H. The PH.0/ PH.1/ PH.2/ PH.3/ PH.12/ PH.13/ PH.14/ PH.15 is ignored. * @var GPIO_T::PUSEL * Offset: 0x30/0x70/0xB0/0xF0/0x130/0x170/0x1B0/0x1F0 PA-H Pull-up and Pull-down Selection Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[2n+1:2n]|PUSEL0 |Port A-H Pin[n] Pull-up and Pull-down Enable Register * | | |Determine each I/O Pull-up/pull-down of Px.n pins. * | | |00 = Px.n pull-up and pull-down disable. * | | |01 = Px.n pull-up enable. * | | |10 = Px.n pull-down enable. * | | |11 = Px.n pull-up and pull-down disable. * | | |Note1: * | | |Basically, the pull-up control and pull-down control has following behavior limitation * | | |The independent pull-up control register only valid when MODEn (Px_MODE[2n+1:2n]) set as tri-state and open-drain mode * | | |The independent pull-down control register only valid when MODEn (Px_MODE[2n+1:2n]) set as tri-state mode * | | |When both pull-up pull-down is set as 1 at tri-state mode, keep I/O in tri-state mode * | | |Note: * | | |Max. n=15 for port A/B/E. * | | |Max. n=13 for port C. The PC.14/ PC.15 is ignored. * | | |Max. n=14 for port D. The PD.15 is ignored. * | | |Max. n=12 for port F. The PF.12/ PF.13/ PF.14/ PF.15 is ignored. * | | |Max. n=15 for port G. The PG.0/ PG.1/ PG.5/ PG.6/ PG.7/ PG.8 is ignored. * | | |Max. n=11 for port H. The PH.0/ PH.1/ PH.2/ PH.3/ PH.12/ PH.13/ PH.14/ PH.15 is ignored. * @var GPIO_T::DBCTL * Offset: 0x34/0x74/0xB4/0xF4/0x134/0x174/0x1B4/0x1F4 PA-H Interrupt De-bounce Control Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[3:0] |DBCLKSEL |De-bounce Sampling Cycle Selection * | | |0000 = Sample interrupt input once per 1 clocks. * | | |0001 = Sample interrupt input once per 2 clocks. * | | |0010 = Sample interrupt input once per 4 clocks. * | | |0011 = Sample interrupt input once per 8 clocks. * | | |0100 = Sample interrupt input once per 16 clocks. * | | |0101 = Sample interrupt input once per 32 clocks. * | | |0110 = Sample interrupt input once per 64 clocks. * | | |0111 = Sample interrupt input once per 128 clocks. * | | |1000 = Sample interrupt input once per 256 clocks. * | | |1001 = Sample interrupt input once per 2*256 clocks. * | | |1010 = Sample interrupt input once per 4*256 clocks. * | | |1011 = Sample interrupt input once per 8*256 clocks. * | | |1100 = Sample interrupt input once per 16*256 clocks. * | | |1101 = Sample interrupt input once per 32*256 clocks. * | | |1110 = Sample interrupt input once per 64*256 clocks. * | | |1111 = Sample interrupt input once per 128*256 clocks. * |[4] |DBCLKSRC |De-bounce Counter Clock Source Selection * | | |0 = De-bounce counter clock source is the HCLK. * | | |1 = De-bounce counter clock source is the 10 kHz internal low speed RC oscillator (LIRC). * |[5] |ICLKON |Interrupt Clock on Mode * | | |0 = Edge detection circuit is active only if I/O pin corresponding RHIEN (Px_INTEN[n+16])/FLIEN (Px_INTEN[n]) bit is set to 1. * | | |1 = All I/O pins edge detection circuit is always active after reset. * | | |Note: It is recommended to disable this bit to save system power if no special application concern. */ __IO uint32_t MODE; /*!< [0x00/0x40/0x80/0xC0/0x100/0x140/0x180/0x1C0] Port A-H I/O Mode Control */ __IO uint32_t DINOFF; /*!< [0x04/0x44/0x84/0xC4/0x104/0x144/0x184/0x1C4] Port A-H Digital Input Path Disable Control */ __IO uint32_t DOUT; /*!< [0x08/0x48/0x88/0xC8/0x108/0x148/0x188/0x1C8] Port A-H Data Output Value */ __IO uint32_t DATMSK; /*!< [0x0C/0x4C/0x8C/0xCC/0x10C/0x14C/0x18C/0x1CC] Port A-H Data Output Write Mask */ __I uint32_t PIN; /*!< [0x10/0x50/0x90/0xD0/0x110/0x150/0x190/0x1D0] Port A-H Pin Value */ __IO uint32_t DBEN; /*!< [0x14/0x54/0x94/0xD4/0x114/0x154/0x194/0x1D4] Port A-H De-Bounce Enable Control */ __IO uint32_t INTTYPE; /*!< [0x18/0x58/0x98/0xD8/0x118/0x158/0x198/0x1D8] Port A-H Interrupt Trigger Type Control */ __IO uint32_t INTEN; /*!< [0x1C/0x5C/0x9C/0xDC/0x11C/0x15C/0x19C/0x1DC] Port A-H Interrupt Enable Control */ __IO uint32_t INTSRC; /*!< [0x20/0x60/0xA0/0xE0/0x120/0x160/0x1A0/0x1E0] Port A-H Interrupt Source Flag */ __IO uint32_t SMTEN; /*!< [0x24/0x64/0xA4/0xE4/0x124/0x164/0x1A4/0x1E4] Port A-H Input Schmitt Trigger Enable */ __IO uint32_t SLEWCTL; /*!< [0x28/0x68/0xA8/0xE8/0x128/0x168/0x1A8/0x1E8] Port A-H High Slew Rate Control */ __I uint32_t RESERVE0[1]; __IO uint32_t PUSEL; /*!< [0x30/0x70/0xB0/0xF0/0x130/0x170/0x1B0/0x1F0] Port A-H Pull-up and Pull-down Selection Register */ __IO uint32_t DBCTL; /*!< [0x34/0x74/0xB4/0xF4/0x134/0x174/0x1B4/0x1F4] Port A-H Interrupt De-bounce Control */ } GPIO_T; /** @addtogroup GPIO_CONST GPIO Bit Field Definition Constant Definitions for GPIO Controller @{ */ #define GPIO_MODE_MODE0_Pos (0) /*!< GPIO_T::MODE: MODE0 Position */ #define GPIO_MODE_MODE0_Msk (0x3ul << GPIO_MODE_MODE0_Pos) /*!< GPIO_T::MODE: MODE0 Mask */ #define GPIO_MODE_MODE1_Pos (2) /*!< GPIO_T::MODE: MODE1 Position */ #define GPIO_MODE_MODE1_Msk (0x3ul << GPIO_MODE_MODE1_Pos) /*!< GPIO_T::MODE: MODE1 Mask */ #define GPIO_MODE_MODE2_Pos (4) /*!< GPIO_T::MODE: MODE2 Position */ #define GPIO_MODE_MODE2_Msk (0x3ul << GPIO_MODE_MODE2_Pos) /*!< GPIO_T::MODE: MODE2 Mask */ #define GPIO_MODE_MODE3_Pos (6) /*!< GPIO_T::MODE: MODE3 Position */ #define GPIO_MODE_MODE3_Msk (0x3ul << GPIO_MODE_MODE3_Pos) /*!< GPIO_T::MODE: MODE3 Mask */ #define GPIO_MODE_MODE4_Pos (8) /*!< GPIO_T::MODE: MODE4 Position */ #define GPIO_MODE_MODE4_Msk (0x3ul << GPIO_MODE_MODE4_Pos) /*!< GPIO_T::MODE: MODE4 Mask */ #define GPIO_MODE_MODE5_Pos (10) /*!< GPIO_T::MODE: MODE5 Position */ #define GPIO_MODE_MODE5_Msk (0x3ul << GPIO_MODE_MODE5_Pos) /*!< GPIO_T::MODE: MODE5 Mask */ #define GPIO_MODE_MODE6_Pos (12) /*!< GPIO_T::MODE: MODE6 Position */ #define GPIO_MODE_MODE6_Msk (0x3ul << GPIO_MODE_MODE6_Pos) /*!< GPIO_T::MODE: MODE6 Mask */ #define GPIO_MODE_MODE7_Pos (14) /*!< GPIO_T::MODE: MODE7 Position */ #define GPIO_MODE_MODE7_Msk (0x3ul << GPIO_MODE_MODE7_Pos) /*!< GPIO_T::MODE: MODE7 Mask */ #define GPIO_MODE_MODE8_Pos (16) /*!< GPIO_T::MODE: MODE8 Position */ #define GPIO_MODE_MODE8_Msk (0x3ul << GPIO_MODE_MODE8_Pos) /*!< GPIO_T::MODE: MODE8 Mask */ #define GPIO_MODE_MODE9_Pos (18) /*!< GPIO_T::MODE: MODE9 Position */ #define GPIO_MODE_MODE9_Msk (0x3ul << GPIO_MODE_MODE9_Pos) /*!< GPIO_T::MODE: MODE9 Mask */ #define GPIO_MODE_MODE10_Pos (20) /*!< GPIO_T::MODE: MODE10 Position */ #define GPIO_MODE_MODE10_Msk (0x3ul << GPIO_MODE_MODE10_Pos) /*!< GPIO_T::MODE: MODE10 Mask */ #define GPIO_MODE_MODE11_Pos (22) /*!< GPIO_T::MODE: MODE11 Position */ #define GPIO_MODE_MODE11_Msk (0x3ul << GPIO_MODE_MODE11_Pos) /*!< GPIO_T::MODE: MODE11 Mask */ #define GPIO_MODE_MODE12_Pos (24) /*!< GPIO_T::MODE: MODE12 Position */ #define GPIO_MODE_MODE12_Msk (0x3ul << GPIO_MODE_MODE12_Pos) /*!< GPIO_T::MODE: MODE12 Mask */ #define GPIO_MODE_MODE13_Pos (26) /*!< GPIO_T::MODE: MODE13 Position */ #define GPIO_MODE_MODE13_Msk (0x3ul << GPIO_MODE_MODE13_Pos) /*!< GPIO_T::MODE: MODE13 Mask */ #define GPIO_MODE_MODE14_Pos (28) /*!< GPIO_T::MODE: MODE14 Position */ #define GPIO_MODE_MODE14_Msk (0x3ul << GPIO_MODE_MODE14_Pos) /*!< GPIO_T::MODE: MODE14 Mask */ #define GPIO_MODE_MODE15_Pos (30) /*!< GPIO_T::MODE: MODE15 Position */ #define GPIO_MODE_MODE15_Msk (0x3ul << GPIO_MODE_MODE15_Pos) /*!< GPIO_T::MODE: MODE15 Mask */ #define GPIO_DINOFF_DINOFF0_Pos (16) /*!< GPIO_T::DINOFF: DINOFF0 Position */ #define GPIO_DINOFF_DINOFF0_Msk (0x1ul << GPIO_DINOFF_DINOFF0_Pos) /*!< GPIO_T::DINOFF: DINOFF0 Mask */ #define GPIO_DINOFF_DINOFF1_Pos (17) /*!< GPIO_T::DINOFF: DINOFF1 Position */ #define GPIO_DINOFF_DINOFF1_Msk (0x1ul << GPIO_DINOFF_DINOFF1_Pos) /*!< GPIO_T::DINOFF: DINOFF1 Mask */ #define GPIO_DINOFF_DINOFF2_Pos (18) /*!< GPIO_T::DINOFF: DINOFF2 Position */ #define GPIO_DINOFF_DINOFF2_Msk (0x1ul << GPIO_DINOFF_DINOFF2_Pos) /*!< GPIO_T::DINOFF: DINOFF2 Mask */ #define GPIO_DINOFF_DINOFF3_Pos (19) /*!< GPIO_T::DINOFF: DINOFF3 Position */ #define GPIO_DINOFF_DINOFF3_Msk (0x1ul << GPIO_DINOFF_DINOFF3_Pos) /*!< GPIO_T::DINOFF: DINOFF3 Mask */ #define GPIO_DINOFF_DINOFF4_Pos (20) /*!< GPIO_T::DINOFF: DINOFF4 Position */ #define GPIO_DINOFF_DINOFF4_Msk (0x1ul << GPIO_DINOFF_DINOFF4_Pos) /*!< GPIO_T::DINOFF: DINOFF4 Mask */ #define GPIO_DINOFF_DINOFF5_Pos (21) /*!< GPIO_T::DINOFF: DINOFF5 Position */ #define GPIO_DINOFF_DINOFF5_Msk (0x1ul << GPIO_DINOFF_DINOFF5_Pos) /*!< GPIO_T::DINOFF: DINOFF5 Mask */ #define GPIO_DINOFF_DINOFF6_Pos (22) /*!< GPIO_T::DINOFF: DINOFF6 Position */ #define GPIO_DINOFF_DINOFF6_Msk (0x1ul << GPIO_DINOFF_DINOFF6_Pos) /*!< GPIO_T::DINOFF: DINOFF6 Mask */ #define GPIO_DINOFF_DINOFF7_Pos (23) /*!< GPIO_T::DINOFF: DINOFF7 Position */ #define GPIO_DINOFF_DINOFF7_Msk (0x1ul << GPIO_DINOFF_DINOFF7_Pos) /*!< GPIO_T::DINOFF: DINOFF7 Mask */ #define GPIO_DINOFF_DINOFF8_Pos (24) /*!< GPIO_T::DINOFF: DINOFF8 Position */ #define GPIO_DINOFF_DINOFF8_Msk (0x1ul << GPIO_DINOFF_DINOFF8_Pos) /*!< GPIO_T::DINOFF: DINOFF8 Mask */ #define GPIO_DINOFF_DINOFF9_Pos (25) /*!< GPIO_T::DINOFF: DINOFF9 Position */ #define GPIO_DINOFF_DINOFF9_Msk (0x1ul << GPIO_DINOFF_DINOFF9_Pos) /*!< GPIO_T::DINOFF: DINOFF9 Mask */ #define GPIO_DINOFF_DINOFF10_Pos (26) /*!< GPIO_T::DINOFF: DINOFF10 Position */ #define GPIO_DINOFF_DINOFF10_Msk (0x1ul << GPIO_DINOFF_DINOFF10_Pos) /*!< GPIO_T::DINOFF: DINOFF10 Mask */ #define GPIO_DINOFF_DINOFF11_Pos (27) /*!< GPIO_T::DINOFF: DINOFF11 Position */ #define GPIO_DINOFF_DINOFF11_Msk (0x1ul << GPIO_DINOFF_DINOFF11_Pos) /*!< GPIO_T::DINOFF: DINOFF11 Mask */ #define GPIO_DINOFF_DINOFF12_Pos (28) /*!< GPIO_T::DINOFF: DINOFF12 Position */ #define GPIO_DINOFF_DINOFF12_Msk (0x1ul << GPIO_DINOFF_DINOFF12_Pos) /*!< GPIO_T::DINOFF: DINOFF12 Mask */ #define GPIO_DINOFF_DINOFF13_Pos (29) /*!< GPIO_T::DINOFF: DINOFF13 Position */ #define GPIO_DINOFF_DINOFF13_Msk (0x1ul << GPIO_DINOFF_DINOFF13_Pos) /*!< GPIO_T::DINOFF: DINOFF13 Mask */ #define GPIO_DINOFF_DINOFF14_Pos (30) /*!< GPIO_T::DINOFF: DINOFF14 Position */ #define GPIO_DINOFF_DINOFF14_Msk (0x1ul << GPIO_DINOFF_DINOFF14_Pos) /*!< GPIO_T::DINOFF: DINOFF14 Mask */ #define GPIO_DINOFF_DINOFF15_Pos (31) /*!< GPIO_T::DINOFF: DINOFF15 Position */ #define GPIO_DINOFF_DINOFF15_Msk (0x1ul << GPIO_DINOFF_DINOFF15_Pos) /*!< GPIO_T::DINOFF: DINOFF15 Mask */ #define GPIO_DOUT_DOUT0_Pos (0) /*!< GPIO_T::DOUT: DOUT0 Position */ #define GPIO_DOUT_DOUT0_Msk (0x1ul << GPIO_DOUT_DOUT0_Pos) /*!< GPIO_T::DOUT: DOUT0 Mask */ #define GPIO_DOUT_DOUT1_Pos (1) /*!< GPIO_T::DOUT: DOUT1 Position */ #define GPIO_DOUT_DOUT1_Msk (0x1ul << GPIO_DOUT_DOUT1_Pos) /*!< GPIO_T::DOUT: DOUT1 Mask */ #define GPIO_DOUT_DOUT2_Pos (2) /*!< GPIO_T::DOUT: DOUT2 Position */ #define GPIO_DOUT_DOUT2_Msk (0x1ul << GPIO_DOUT_DOUT2_Pos) /*!< GPIO_T::DOUT: DOUT2 Mask */ #define GPIO_DOUT_DOUT3_Pos (3) /*!< GPIO_T::DOUT: DOUT3 Position */ #define GPIO_DOUT_DOUT3_Msk (0x1ul << GPIO_DOUT_DOUT3_Pos) /*!< GPIO_T::DOUT: DOUT3 Mask */ #define GPIO_DOUT_DOUT4_Pos (4) /*!< GPIO_T::DOUT: DOUT4 Position */ #define GPIO_DOUT_DOUT4_Msk (0x1ul << GPIO_DOUT_DOUT4_Pos) /*!< GPIO_T::DOUT: DOUT4 Mask */ #define GPIO_DOUT_DOUT5_Pos (5) /*!< GPIO_T::DOUT: DOUT5 Position */ #define GPIO_DOUT_DOUT5_Msk (0x1ul << GPIO_DOUT_DOUT5_Pos) /*!< GPIO_T::DOUT: DOUT5 Mask */ #define GPIO_DOUT_DOUT6_Pos (6) /*!< GPIO_T::DOUT: DOUT6 Position */ #define GPIO_DOUT_DOUT6_Msk (0x1ul << GPIO_DOUT_DOUT6_Pos) /*!< GPIO_T::DOUT: DOUT6 Mask */ #define GPIO_DOUT_DOUT7_Pos (7) /*!< GPIO_T::DOUT: DOUT7 Position */ #define GPIO_DOUT_DOUT7_Msk (0x1ul << GPIO_DOUT_DOUT7_Pos) /*!< GPIO_T::DOUT: DOUT7 Mask */ #define GPIO_DOUT_DOUT8_Pos (8) /*!< GPIO_T::DOUT: DOUT8 Position */ #define GPIO_DOUT_DOUT8_Msk (0x1ul << GPIO_DOUT_DOUT8_Pos) /*!< GPIO_T::DOUT: DOUT8 Mask */ #define GPIO_DOUT_DOUT9_Pos (9) /*!< GPIO_T::DOUT: DOUT9 Position */ #define GPIO_DOUT_DOUT9_Msk (0x1ul << GPIO_DOUT_DOUT9_Pos) /*!< GPIO_T::DOUT: DOUT9 Mask */ #define GPIO_DOUT_DOUT10_Pos (10) /*!< GPIO_T::DOUT: DOUT10 Position */ #define GPIO_DOUT_DOUT10_Msk (0x1ul << GPIO_DOUT_DOUT10_Pos) /*!< GPIO_T::DOUT: DOUT10 Mask */ #define GPIO_DOUT_DOUT11_Pos (11) /*!< GPIO_T::DOUT: DOUT11 Position */ #define GPIO_DOUT_DOUT11_Msk (0x1ul << GPIO_DOUT_DOUT11_Pos) /*!< GPIO_T::DOUT: DOUT11 Mask */ #define GPIO_DOUT_DOUT12_Pos (12) /*!< GPIO_T::DOUT: DOUT12 Position */ #define GPIO_DOUT_DOUT12_Msk (0x1ul << GPIO_DOUT_DOUT12_Pos) /*!< GPIO_T::DOUT: DOUT12 Mask */ #define GPIO_DOUT_DOUT13_Pos (13) /*!< GPIO_T::DOUT: DOUT13 Position */ #define GPIO_DOUT_DOUT13_Msk (0x1ul << GPIO_DOUT_DOUT13_Pos) /*!< GPIO_T::DOUT: DOUT13 Mask */ #define GPIO_DOUT_DOUT14_Pos (14) /*!< GPIO_T::DOUT: DOUT14 Position */ #define GPIO_DOUT_DOUT14_Msk (0x1ul << GPIO_DOUT_DOUT14_Pos) /*!< GPIO_T::DOUT: DOUT14 Mask */ #define GPIO_DOUT_DOUT15_Pos (15) /*!< GPIO_T::DOUT: DOUT15 Position */ #define GPIO_DOUT_DOUT15_Msk (0x1ul << GPIO_DOUT_DOUT15_Pos) /*!< GPIO_T::DOUT: DOUT15 Mask */ #define GPIO_DATMSK_DATMSK0_Pos (0) /*!< GPIO_T::DATMSK: DATMSK0 Position */ #define GPIO_DATMSK_DATMSK0_Msk (0x1ul << GPIO_DATMSK_DATMSK0_Pos) /*!< GPIO_T::DATMSK: DATMSK0 Mask */ #define GPIO_DATMSK_DATMSK1_Pos (1) /*!< GPIO_T::DATMSK: DATMSK1 Position */ #define GPIO_DATMSK_DATMSK1_Msk (0x1ul << GPIO_DATMSK_DATMSK1_Pos) /*!< GPIO_T::DATMSK: DATMSK1 Mask */ #define GPIO_DATMSK_DATMSK2_Pos (2) /*!< GPIO_T::DATMSK: DATMSK2 Position */ #define GPIO_DATMSK_DATMSK2_Msk (0x1ul << GPIO_DATMSK_DATMSK2_Pos) /*!< GPIO_T::DATMSK: DATMSK2 Mask */ #define GPIO_DATMSK_DATMSK3_Pos (3) /*!< GPIO_T::DATMSK: DATMSK3 Position */ #define GPIO_DATMSK_DATMSK3_Msk (0x1ul << GPIO_DATMSK_DATMSK3_Pos) /*!< GPIO_T::DATMSK: DATMSK3 Mask */ #define GPIO_DATMSK_DATMSK4_Pos (4) /*!< GPIO_T::DATMSK: DATMSK4 Position */ #define GPIO_DATMSK_DATMSK4_Msk (0x1ul << GPIO_DATMSK_DATMSK4_Pos) /*!< GPIO_T::DATMSK: DATMSK4 Mask */ #define GPIO_DATMSK_DATMSK5_Pos (5) /*!< GPIO_T::DATMSK: DATMSK5 Position */ #define GPIO_DATMSK_DATMSK5_Msk (0x1ul << GPIO_DATMSK_DATMSK5_Pos) /*!< GPIO_T::DATMSK: DATMSK5 Mask */ #define GPIO_DATMSK_DATMSK6_Pos (6) /*!< GPIO_T::DATMSK: DATMSK6 Position */ #define GPIO_DATMSK_DATMSK6_Msk (0x1ul << GPIO_DATMSK_DATMSK6_Pos) /*!< GPIO_T::DATMSK: DATMSK6 Mask */ #define GPIO_DATMSK_DATMSK7_Pos (7) /*!< GPIO_T::DATMSK: DATMSK7 Position */ #define GPIO_DATMSK_DATMSK7_Msk (0x1ul << GPIO_DATMSK_DATMSK7_Pos) /*!< GPIO_T::DATMSK: DATMSK7 Mask */ #define GPIO_DATMSK_DATMSK8_Pos (8) /*!< GPIO_T::DATMSK: DATMSK8 Position */ #define GPIO_DATMSK_DATMSK8_Msk (0x1ul << GPIO_DATMSK_DATMSK8_Pos) /*!< GPIO_T::DATMSK: DATMSK8 Mask */ #define GPIO_DATMSK_DATMSK9_Pos (9) /*!< GPIO_T::DATMSK: DATMSK9 Position */ #define GPIO_DATMSK_DATMSK9_Msk (0x1ul << GPIO_DATMSK_DATMSK9_Pos) /*!< GPIO_T::DATMSK: DATMSK9 Mask */ #define GPIO_DATMSK_DATMSK10_Pos (10) /*!< GPIO_T::DATMSK: DATMSK10 Position */ #define GPIO_DATMSK_DATMSK10_Msk (0x1ul << GPIO_DATMSK_DATMSK10_Pos) /*!< GPIO_T::DATMSK: DATMSK10 Mask */ #define GPIO_DATMSK_DATMSK11_Pos (11) /*!< GPIO_T::DATMSK: DATMSK11 Position */ #define GPIO_DATMSK_DATMSK11_Msk (0x1ul << GPIO_DATMSK_DATMSK11_Pos) /*!< GPIO_T::DATMSK: DATMSK11 Mask */ #define GPIO_DATMSK_DATMSK12_Pos (12) /*!< GPIO_T::DATMSK: DATMSK12 Position */ #define GPIO_DATMSK_DATMSK12_Msk (0x1ul << GPIO_DATMSK_DATMSK12_Pos) /*!< GPIO_T::DATMSK: DATMSK12 Mask */ #define GPIO_DATMSK_DATMSK13_Pos (13) /*!< GPIO_T::DATMSK: DATMSK13 Position */ #define GPIO_DATMSK_DATMSK13_Msk (0x1ul << GPIO_DATMSK_DATMSK13_Pos) /*!< GPIO_T::DATMSK: DATMSK13 Mask */ #define GPIO_DATMSK_DATMSK14_Pos (14) /*!< GPIO_T::DATMSK: DATMSK14 Position */ #define GPIO_DATMSK_DATMSK14_Msk (0x1ul << GPIO_DATMSK_DATMSK14_Pos) /*!< GPIO_T::DATMSK: DATMSK14 Mask */ #define GPIO_DATMSK_DATMSK15_Pos (15) /*!< GPIO_T::DATMSK: DATMSK15 Position */ #define GPIO_DATMSK_DATMSK15_Msk (0x1ul << GPIO_DATMSK_DATMSK15_Pos) /*!< GPIO_T::DATMSK: DATMSK15 Mask */ #define GPIO_PIN_PIN0_Pos (0) /*!< GPIO_T::PIN: PIN0 Position */ #define GPIO_PIN_PIN0_Msk (0x1ul << GPIO_PIN_PIN0_Pos) /*!< GPIO_T::PIN: PIN0 Mask */ #define GPIO_PIN_PIN1_Pos (1) /*!< GPIO_T::PIN: PIN1 Position */ #define GPIO_PIN_PIN1_Msk (0x1ul << GPIO_PIN_PIN1_Pos) /*!< GPIO_T::PIN: PIN1 Mask */ #define GPIO_PIN_PIN2_Pos (2) /*!< GPIO_T::PIN: PIN2 Position */ #define GPIO_PIN_PIN2_Msk (0x1ul << GPIO_PIN_PIN2_Pos) /*!< GPIO_T::PIN: PIN2 Mask */ #define GPIO_PIN_PIN3_Pos (3) /*!< GPIO_T::PIN: PIN3 Position */ #define GPIO_PIN_PIN3_Msk (0x1ul << GPIO_PIN_PIN3_Pos) /*!< GPIO_T::PIN: PIN3 Mask */ #define GPIO_PIN_PIN4_Pos (4) /*!< GPIO_T::PIN: PIN4 Position */ #define GPIO_PIN_PIN4_Msk (0x1ul << GPIO_PIN_PIN4_Pos) /*!< GPIO_T::PIN: PIN4 Mask */ #define GPIO_PIN_PIN5_Pos (5) /*!< GPIO_T::PIN: PIN5 Position */ #define GPIO_PIN_PIN5_Msk (0x1ul << GPIO_PIN_PIN5_Pos) /*!< GPIO_T::PIN: PIN5 Mask */ #define GPIO_PIN_PIN6_Pos (6) /*!< GPIO_T::PIN: PIN6 Position */ #define GPIO_PIN_PIN6_Msk (0x1ul << GPIO_PIN_PIN6_Pos) /*!< GPIO_T::PIN: PIN6 Mask */ #define GPIO_PIN_PIN7_Pos (7) /*!< GPIO_T::PIN: PIN7 Position */ #define GPIO_PIN_PIN7_Msk (0x1ul << GPIO_PIN_PIN7_Pos) /*!< GPIO_T::PIN: PIN7 Mask */ #define GPIO_PIN_PIN8_Pos (8) /*!< GPIO_T::PIN: PIN8 Position */ #define GPIO_PIN_PIN8_Msk (0x1ul << GPIO_PIN_PIN8_Pos) /*!< GPIO_T::PIN: PIN8 Mask */ #define GPIO_PIN_PIN9_Pos (9) /*!< GPIO_T::PIN: PIN9 Position */ #define GPIO_PIN_PIN9_Msk (0x1ul << GPIO_PIN_PIN9_Pos) /*!< GPIO_T::PIN: PIN9 Mask */ #define GPIO_PIN_PIN10_Pos (10) /*!< GPIO_T::PIN: PIN10 Position */ #define GPIO_PIN_PIN10_Msk (0x1ul << GPIO_PIN_PIN10_Pos) /*!< GPIO_T::PIN: PIN10 Mask */ #define GPIO_PIN_PIN11_Pos (11) /*!< GPIO_T::PIN: PIN11 Position */ #define GPIO_PIN_PIN11_Msk (0x1ul << GPIO_PIN_PIN11_Pos) /*!< GPIO_T::PIN: PIN11 Mask */ #define GPIO_PIN_PIN12_Pos (12) /*!< GPIO_T::PIN: PIN12 Position */ #define GPIO_PIN_PIN12_Msk (0x1ul << GPIO_PIN_PIN12_Pos) /*!< GPIO_T::PIN: PIN12 Mask */ #define GPIO_PIN_PIN13_Pos (13) /*!< GPIO_T::PIN: PIN13 Position */ #define GPIO_PIN_PIN13_Msk (0x1ul << GPIO_PIN_PIN13_Pos) /*!< GPIO_T::PIN: PIN13 Mask */ #define GPIO_PIN_PIN14_Pos (14) /*!< GPIO_T::PIN: PIN14 Position */ #define GPIO_PIN_PIN14_Msk (0x1ul << GPIO_PIN_PIN14_Pos) /*!< GPIO_T::PIN: PIN14 Mask */ #define GPIO_PIN_PIN15_Pos (15) /*!< GPIO_T::PIN: PIN15 Position */ #define GPIO_PIN_PIN15_Msk (0x1ul << GPIO_PIN_PIN15_Pos) /*!< GPIO_T::PIN: PIN15 Mask */ #define GPIO_DBEN_DBEN0_Pos (0) /*!< GPIO_T::DBEN: DBEN0 Position */ #define GPIO_DBEN_DBEN0_Msk (0x1ul << GPIO_DBEN_DBEN0_Pos) /*!< GPIO_T::DBEN: DBEN0 Mask */ #define GPIO_DBEN_DBEN1_Pos (1) /*!< GPIO_T::DBEN: DBEN1 Position */ #define GPIO_DBEN_DBEN1_Msk (0x1ul << GPIO_DBEN_DBEN1_Pos) /*!< GPIO_T::DBEN: DBEN1 Mask */ #define GPIO_DBEN_DBEN2_Pos (2) /*!< GPIO_T::DBEN: DBEN2 Position */ #define GPIO_DBEN_DBEN2_Msk (0x1ul << GPIO_DBEN_DBEN2_Pos) /*!< GPIO_T::DBEN: DBEN2 Mask */ #define GPIO_DBEN_DBEN3_Pos (3) /*!< GPIO_T::DBEN: DBEN3 Position */ #define GPIO_DBEN_DBEN3_Msk (0x1ul << GPIO_DBEN_DBEN3_Pos) /*!< GPIO_T::DBEN: DBEN3 Mask */ #define GPIO_DBEN_DBEN4_Pos (4) /*!< GPIO_T::DBEN: DBEN4 Position */ #define GPIO_DBEN_DBEN4_Msk (0x1ul << GPIO_DBEN_DBEN4_Pos) /*!< GPIO_T::DBEN: DBEN4 Mask */ #define GPIO_DBEN_DBEN5_Pos (5) /*!< GPIO_T::DBEN: DBEN5 Position */ #define GPIO_DBEN_DBEN5_Msk (0x1ul << GPIO_DBEN_DBEN5_Pos) /*!< GPIO_T::DBEN: DBEN5 Mask */ #define GPIO_DBEN_DBEN6_Pos (6) /*!< GPIO_T::DBEN: DBEN6 Position */ #define GPIO_DBEN_DBEN6_Msk (0x1ul << GPIO_DBEN_DBEN6_Pos) /*!< GPIO_T::DBEN: DBEN6 Mask */ #define GPIO_DBEN_DBEN7_Pos (7) /*!< GPIO_T::DBEN: DBEN7 Position */ #define GPIO_DBEN_DBEN7_Msk (0x1ul << GPIO_DBEN_DBEN7_Pos) /*!< GPIO_T::DBEN: DBEN7 Mask */ #define GPIO_DBEN_DBEN8_Pos (8) /*!< GPIO_T::DBEN: DBEN8 Position */ #define GPIO_DBEN_DBEN8_Msk (0x1ul << GPIO_DBEN_DBEN8_Pos) /*!< GPIO_T::DBEN: DBEN8 Mask */ #define GPIO_DBEN_DBEN9_Pos (9) /*!< GPIO_T::DBEN: DBEN9 Position */ #define GPIO_DBEN_DBEN9_Msk (0x1ul << GPIO_DBEN_DBEN9_Pos) /*!< GPIO_T::DBEN: DBEN9 Mask */ #define GPIO_DBEN_DBEN10_Pos (10) /*!< GPIO_T::DBEN: DBEN10 Position */ #define GPIO_DBEN_DBEN10_Msk (0x1ul << GPIO_DBEN_DBEN10_Pos) /*!< GPIO_T::DBEN: DBEN10 Mask */ #define GPIO_DBEN_DBEN11_Pos (11) /*!< GPIO_T::DBEN: DBEN11 Position */ #define GPIO_DBEN_DBEN11_Msk (0x1ul << GPIO_DBEN_DBEN11_Pos) /*!< GPIO_T::DBEN: DBEN11 Mask */ #define GPIO_DBEN_DBEN12_Pos (12) /*!< GPIO_T::DBEN: DBEN12 Position */ #define GPIO_DBEN_DBEN12_Msk (0x1ul << GPIO_DBEN_DBEN12_Pos) /*!< GPIO_T::DBEN: DBEN12 Mask */ #define GPIO_DBEN_DBEN13_Pos (13) /*!< GPIO_T::DBEN: DBEN13 Position */ #define GPIO_DBEN_DBEN13_Msk (0x1ul << GPIO_DBEN_DBEN13_Pos) /*!< GPIO_T::DBEN: DBEN13 Mask */ #define GPIO_DBEN_DBEN14_Pos (14) /*!< GPIO_T::DBEN: DBEN14 Position */ #define GPIO_DBEN_DBEN14_Msk (0x1ul << GPIO_DBEN_DBEN14_Pos) /*!< GPIO_T::DBEN: DBEN14 Mask */ #define GPIO_DBEN_DBEN15_Pos (15) /*!< GPIO_T::DBEN: DBEN15 Position */ #define GPIO_DBEN_DBEN15_Msk (0x1ul << GPIO_DBEN_DBEN15_Pos) /*!< GPIO_T::DBEN: DBEN15 Mask */ #define GPIO_INTTYPE_TYPE0_Pos (0) /*!< GPIO_T::INTTYPE: TYPE0 Position */ #define GPIO_INTTYPE_TYPE0_Msk (0x1ul << GPIO_INTTYPE_TYPE0_Pos) /*!< GPIO_T::INTTYPE: TYPE0 Mask */ #define GPIO_INTTYPE_TYPE1_Pos (1) /*!< GPIO_T::INTTYPE: TYPE1 Position */ #define GPIO_INTTYPE_TYPE1_Msk (0x1ul << GPIO_INTTYPE_TYPE1_Pos) /*!< GPIO_T::INTTYPE: TYPE1 Mask */ #define GPIO_INTTYPE_TYPE2_Pos (2) /*!< GPIO_T::INTTYPE: TYPE2 Position */ #define GPIO_INTTYPE_TYPE2_Msk (0x1ul << GPIO_INTTYPE_TYPE2_Pos) /*!< GPIO_T::INTTYPE: TYPE2 Mask */ #define GPIO_INTTYPE_TYPE3_Pos (3) /*!< GPIO_T::INTTYPE: TYPE3 Position */ #define GPIO_INTTYPE_TYPE3_Msk (0x1ul << GPIO_INTTYPE_TYPE3_Pos) /*!< GPIO_T::INTTYPE: TYPE3 Mask */ #define GPIO_INTTYPE_TYPE4_Pos (4) /*!< GPIO_T::INTTYPE: TYPE4 Position */ #define GPIO_INTTYPE_TYPE4_Msk (0x1ul << GPIO_INTTYPE_TYPE4_Pos) /*!< GPIO_T::INTTYPE: TYPE4 Mask */ #define GPIO_INTTYPE_TYPE5_Pos (5) /*!< GPIO_T::INTTYPE: TYPE5 Position */ #define GPIO_INTTYPE_TYPE5_Msk (0x1ul << GPIO_INTTYPE_TYPE5_Pos) /*!< GPIO_T::INTTYPE: TYPE5 Mask */ #define GPIO_INTTYPE_TYPE6_Pos (6) /*!< GPIO_T::INTTYPE: TYPE6 Position */ #define GPIO_INTTYPE_TYPE6_Msk (0x1ul << GPIO_INTTYPE_TYPE6_Pos) /*!< GPIO_T::INTTYPE: TYPE6 Mask */ #define GPIO_INTTYPE_TYPE7_Pos (7) /*!< GPIO_T::INTTYPE: TYPE7 Position */ #define GPIO_INTTYPE_TYPE7_Msk (0x1ul << GPIO_INTTYPE_TYPE7_Pos) /*!< GPIO_T::INTTYPE: TYPE7 Mask */ #define GPIO_INTTYPE_TYPE8_Pos (8) /*!< GPIO_T::INTTYPE: TYPE8 Position */ #define GPIO_INTTYPE_TYPE8_Msk (0x1ul << GPIO_INTTYPE_TYPE8_Pos) /*!< GPIO_T::INTTYPE: TYPE8 Mask */ #define GPIO_INTTYPE_TYPE9_Pos (9) /*!< GPIO_T::INTTYPE: TYPE9 Position */ #define GPIO_INTTYPE_TYPE9_Msk (0x1ul << GPIO_INTTYPE_TYPE9_Pos) /*!< GPIO_T::INTTYPE: TYPE9 Mask */ #define GPIO_INTTYPE_TYPE10_Pos (10) /*!< GPIO_T::INTTYPE: TYPE10 Position */ #define GPIO_INTTYPE_TYPE10_Msk (0x1ul << GPIO_INTTYPE_TYPE10_Pos) /*!< GPIO_T::INTTYPE: TYPE10 Mask */ #define GPIO_INTTYPE_TYPE11_Pos (11) /*!< GPIO_T::INTTYPE: TYPE11 Position */ #define GPIO_INTTYPE_TYPE11_Msk (0x1ul << GPIO_INTTYPE_TYPE11_Pos) /*!< GPIO_T::INTTYPE: TYPE11 Mask */ #define GPIO_INTTYPE_TYPE12_Pos (12) /*!< GPIO_T::INTTYPE: TYPE12 Position */ #define GPIO_INTTYPE_TYPE12_Msk (0x1ul << GPIO_INTTYPE_TYPE12_Pos) /*!< GPIO_T::INTTYPE: TYPE12 Mask */ #define GPIO_INTTYPE_TYPE13_Pos (13) /*!< GPIO_T::INTTYPE: TYPE13 Position */ #define GPIO_INTTYPE_TYPE13_Msk (0x1ul << GPIO_INTTYPE_TYPE13_Pos) /*!< GPIO_T::INTTYPE: TYPE13 Mask */ #define GPIO_INTTYPE_TYPE14_Pos (14) /*!< GPIO_T::INTTYPE: TYPE14 Position */ #define GPIO_INTTYPE_TYPE14_Msk (0x1ul << GPIO_INTTYPE_TYPE14_Pos) /*!< GPIO_T::INTTYPE: TYPE14 Mask */ #define GPIO_INTTYPE_TYPE15_Pos (15) /*!< GPIO_T::INTTYPE: TYPE15 Position */ #define GPIO_INTTYPE_TYPE15_Msk (0x1ul << GPIO_INTTYPE_TYPE15_Pos) /*!< GPIO_T::INTTYPE: TYPE15 Mask */ #define GPIO_INTEN_FLIEN0_Pos (0) /*!< GPIO_T::INTEN: FLIEN0 Position */ #define GPIO_INTEN_FLIEN0_Msk (0x1ul << GPIO_INTEN_FLIEN0_Pos) /*!< GPIO_T::INTEN: FLIEN0 Mask */ #define GPIO_INTEN_FLIEN1_Pos (1) /*!< GPIO_T::INTEN: FLIEN1 Position */ #define GPIO_INTEN_FLIEN1_Msk (0x1ul << GPIO_INTEN_FLIEN1_Pos) /*!< GPIO_T::INTEN: FLIEN1 Mask */ #define GPIO_INTEN_FLIEN2_Pos (2) /*!< GPIO_T::INTEN: FLIEN2 Position */ #define GPIO_INTEN_FLIEN2_Msk (0x1ul << GPIO_INTEN_FLIEN2_Pos) /*!< GPIO_T::INTEN: FLIEN2 Mask */ #define GPIO_INTEN_FLIEN3_Pos (3) /*!< GPIO_T::INTEN: FLIEN3 Position */ #define GPIO_INTEN_FLIEN3_Msk (0x1ul << GPIO_INTEN_FLIEN3_Pos) /*!< GPIO_T::INTEN: FLIEN3 Mask */ #define GPIO_INTEN_FLIEN4_Pos (4) /*!< GPIO_T::INTEN: FLIEN4 Position */ #define GPIO_INTEN_FLIEN4_Msk (0x1ul << GPIO_INTEN_FLIEN4_Pos) /*!< GPIO_T::INTEN: FLIEN4 Mask */ #define GPIO_INTEN_FLIEN5_Pos (5) /*!< GPIO_T::INTEN: FLIEN5 Position */ #define GPIO_INTEN_FLIEN5_Msk (0x1ul << GPIO_INTEN_FLIEN5_Pos) /*!< GPIO_T::INTEN: FLIEN5 Mask */ #define GPIO_INTEN_FLIEN6_Pos (6) /*!< GPIO_T::INTEN: FLIEN6 Position */ #define GPIO_INTEN_FLIEN6_Msk (0x1ul << GPIO_INTEN_FLIEN6_Pos) /*!< GPIO_T::INTEN: FLIEN6 Mask */ #define GPIO_INTEN_FLIEN7_Pos (7) /*!< GPIO_T::INTEN: FLIEN7 Position */ #define GPIO_INTEN_FLIEN7_Msk (0x1ul << GPIO_INTEN_FLIEN7_Pos) /*!< GPIO_T::INTEN: FLIEN7 Mask */ #define GPIO_INTEN_FLIEN8_Pos (8) /*!< GPIO_T::INTEN: FLIEN8 Position */ #define GPIO_INTEN_FLIEN8_Msk (0x1ul << GPIO_INTEN_FLIEN8_Pos) /*!< GPIO_T::INTEN: FLIEN8 Mask */ #define GPIO_INTEN_FLIEN9_Pos (9) /*!< GPIO_T::INTEN: FLIEN9 Position */ #define GPIO_INTEN_FLIEN9_Msk (0x1ul << GPIO_INTEN_FLIEN9_Pos) /*!< GPIO_T::INTEN: FLIEN9 Mask */ #define GPIO_INTEN_FLIEN10_Pos (10) /*!< GPIO_T::INTEN: FLIEN10 Position */ #define GPIO_INTEN_FLIEN10_Msk (0x1ul << GPIO_INTEN_FLIEN10_Pos) /*!< GPIO_T::INTEN: FLIEN10 Mask */ #define GPIO_INTEN_FLIEN11_Pos (11) /*!< GPIO_T::INTEN: FLIEN11 Position */ #define GPIO_INTEN_FLIEN11_Msk (0x1ul << GPIO_INTEN_FLIEN11_Pos) /*!< GPIO_T::INTEN: FLIEN11 Mask */ #define GPIO_INTEN_FLIEN12_Pos (12) /*!< GPIO_T::INTEN: FLIEN12 Position */ #define GPIO_INTEN_FLIEN12_Msk (0x1ul << GPIO_INTEN_FLIEN12_Pos) /*!< GPIO_T::INTEN: FLIEN12 Mask */ #define GPIO_INTEN_FLIEN13_Pos (13) /*!< GPIO_T::INTEN: FLIEN13 Position */ #define GPIO_INTEN_FLIEN13_Msk (0x1ul << GPIO_INTEN_FLIEN13_Pos) /*!< GPIO_T::INTEN: FLIEN13 Mask */ #define GPIO_INTEN_FLIEN14_Pos (14) /*!< GPIO_T::INTEN: FLIEN14 Position */ #define GPIO_INTEN_FLIEN14_Msk (0x1ul << GPIO_INTEN_FLIEN14_Pos) /*!< GPIO_T::INTEN: FLIEN14 Mask */ #define GPIO_INTEN_FLIEN15_Pos (15) /*!< GPIO_T::INTEN: FLIEN15 Position */ #define GPIO_INTEN_FLIEN15_Msk (0x1ul << GPIO_INTEN_FLIEN15_Pos) /*!< GPIO_T::INTEN: FLIEN15 Mask */ #define GPIO_INTEN_RHIEN0_Pos (16) /*!< GPIO_T::INTEN: RHIEN0 Position */ #define GPIO_INTEN_RHIEN0_Msk (0x1ul << GPIO_INTEN_RHIEN0_Pos) /*!< GPIO_T::INTEN: RHIEN0 Mask */ #define GPIO_INTEN_RHIEN1_Pos (17) /*!< GPIO_T::INTEN: RHIEN1 Position */ #define GPIO_INTEN_RHIEN1_Msk (0x1ul << GPIO_INTEN_RHIEN1_Pos) /*!< GPIO_T::INTEN: RHIEN1 Mask */ #define GPIO_INTEN_RHIEN2_Pos (18) /*!< GPIO_T::INTEN: RHIEN2 Position */ #define GPIO_INTEN_RHIEN2_Msk (0x1ul << GPIO_INTEN_RHIEN2_Pos) /*!< GPIO_T::INTEN: RHIEN2 Mask */ #define GPIO_INTEN_RHIEN3_Pos (19) /*!< GPIO_T::INTEN: RHIEN3 Position */ #define GPIO_INTEN_RHIEN3_Msk (0x1ul << GPIO_INTEN_RHIEN3_Pos) /*!< GPIO_T::INTEN: RHIEN3 Mask */ #define GPIO_INTEN_RHIEN4_Pos (20) /*!< GPIO_T::INTEN: RHIEN4 Position */ #define GPIO_INTEN_RHIEN4_Msk (0x1ul << GPIO_INTEN_RHIEN4_Pos) /*!< GPIO_T::INTEN: RHIEN4 Mask */ #define GPIO_INTEN_RHIEN5_Pos (21) /*!< GPIO_T::INTEN: RHIEN5 Position */ #define GPIO_INTEN_RHIEN5_Msk (0x1ul << GPIO_INTEN_RHIEN5_Pos) /*!< GPIO_T::INTEN: RHIEN5 Mask */ #define GPIO_INTEN_RHIEN6_Pos (22) /*!< GPIO_T::INTEN: RHIEN6 Position */ #define GPIO_INTEN_RHIEN6_Msk (0x1ul << GPIO_INTEN_RHIEN6_Pos) /*!< GPIO_T::INTEN: RHIEN6 Mask */ #define GPIO_INTEN_RHIEN7_Pos (23) /*!< GPIO_T::INTEN: RHIEN7 Position */ #define GPIO_INTEN_RHIEN7_Msk (0x1ul << GPIO_INTEN_RHIEN7_Pos) /*!< GPIO_T::INTEN: RHIEN7 Mask */ #define GPIO_INTEN_RHIEN8_Pos (24) /*!< GPIO_T::INTEN: RHIEN8 Position */ #define GPIO_INTEN_RHIEN8_Msk (0x1ul << GPIO_INTEN_RHIEN8_Pos) /*!< GPIO_T::INTEN: RHIEN8 Mask */ #define GPIO_INTEN_RHIEN9_Pos (25) /*!< GPIO_T::INTEN: RHIEN9 Position */ #define GPIO_INTEN_RHIEN9_Msk (0x1ul << GPIO_INTEN_RHIEN9_Pos) /*!< GPIO_T::INTEN: RHIEN9 Mask */ #define GPIO_INTEN_RHIEN10_Pos (26) /*!< GPIO_T::INTEN: RHIEN10 Position */ #define GPIO_INTEN_RHIEN10_Msk (0x1ul << GPIO_INTEN_RHIEN10_Pos) /*!< GPIO_T::INTEN: RHIEN10 Mask */ #define GPIO_INTEN_RHIEN11_Pos (27) /*!< GPIO_T::INTEN: RHIEN11 Position */ #define GPIO_INTEN_RHIEN11_Msk (0x1ul << GPIO_INTEN_RHIEN11_Pos) /*!< GPIO_T::INTEN: RHIEN11 Mask */ #define GPIO_INTEN_RHIEN12_Pos (28) /*!< GPIO_T::INTEN: RHIEN12 Position */ #define GPIO_INTEN_RHIEN12_Msk (0x1ul << GPIO_INTEN_RHIEN12_Pos) /*!< GPIO_T::INTEN: RHIEN12 Mask */ #define GPIO_INTEN_RHIEN13_Pos (29) /*!< GPIO_T::INTEN: RHIEN13 Position */ #define GPIO_INTEN_RHIEN13_Msk (0x1ul << GPIO_INTEN_RHIEN13_Pos) /*!< GPIO_T::INTEN: RHIEN13 Mask */ #define GPIO_INTEN_RHIEN14_Pos (30) /*!< GPIO_T::INTEN: RHIEN14 Position */ #define GPIO_INTEN_RHIEN14_Msk (0x1ul << GPIO_INTEN_RHIEN14_Pos) /*!< GPIO_T::INTEN: RHIEN14 Mask */ #define GPIO_INTEN_RHIEN15_Pos (31) /*!< GPIO_T::INTEN: RHIEN15 Position */ #define GPIO_INTEN_RHIEN15_Msk (0x1ul << GPIO_INTEN_RHIEN15_Pos) /*!< GPIO_T::INTEN: RHIEN15 Mask */ #define GPIO_INTSRC_INTSRC0_Pos (0) /*!< GPIO_T::INTSRC: INTSRC0 Position */ #define GPIO_INTSRC_INTSRC0_Msk (0x1ul << GPIO_INTSRC_INTSRC0_Pos) /*!< GPIO_T::INTSRC: INTSRC0 Mask */ #define GPIO_INTSRC_INTSRC1_Pos (1) /*!< GPIO_T::INTSRC: INTSRC1 Position */ #define GPIO_INTSRC_INTSRC1_Msk (0x1ul << GPIO_INTSRC_INTSRC1_Pos) /*!< GPIO_T::INTSRC: INTSRC1 Mask */ #define GPIO_INTSRC_INTSRC2_Pos (2) /*!< GPIO_T::INTSRC: INTSRC2 Position */ #define GPIO_INTSRC_INTSRC2_Msk (0x1ul << GPIO_INTSRC_INTSRC2_Pos) /*!< GPIO_T::INTSRC: INTSRC2 Mask */ #define GPIO_INTSRC_INTSRC3_Pos (3) /*!< GPIO_T::INTSRC: INTSRC3 Position */ #define GPIO_INTSRC_INTSRC3_Msk (0x1ul << GPIO_INTSRC_INTSRC3_Pos) /*!< GPIO_T::INTSRC: INTSRC3 Mask */ #define GPIO_INTSRC_INTSRC4_Pos (4) /*!< GPIO_T::INTSRC: INTSRC4 Position */ #define GPIO_INTSRC_INTSRC4_Msk (0x1ul << GPIO_INTSRC_INTSRC4_Pos) /*!< GPIO_T::INTSRC: INTSRC4 Mask */ #define GPIO_INTSRC_INTSRC5_Pos (5) /*!< GPIO_T::INTSRC: INTSRC5 Position */ #define GPIO_INTSRC_INTSRC5_Msk (0x1ul << GPIO_INTSRC_INTSRC5_Pos) /*!< GPIO_T::INTSRC: INTSRC5 Mask */ #define GPIO_INTSRC_INTSRC6_Pos (6) /*!< GPIO_T::INTSRC: INTSRC6 Position */ #define GPIO_INTSRC_INTSRC6_Msk (0x1ul << GPIO_INTSRC_INTSRC6_Pos) /*!< GPIO_T::INTSRC: INTSRC6 Mask */ #define GPIO_INTSRC_INTSRC7_Pos (7) /*!< GPIO_T::INTSRC: INTSRC7 Position */ #define GPIO_INTSRC_INTSRC7_Msk (0x1ul << GPIO_INTSRC_INTSRC7_Pos) /*!< GPIO_T::INTSRC: INTSRC7 Mask */ #define GPIO_INTSRC_INTSRC8_Pos (8) /*!< GPIO_T::INTSRC: INTSRC8 Position */ #define GPIO_INTSRC_INTSRC8_Msk (0x1ul << GPIO_INTSRC_INTSRC8_Pos) /*!< GPIO_T::INTSRC: INTSRC8 Mask */ #define GPIO_INTSRC_INTSRC9_Pos (9) /*!< GPIO_T::INTSRC: INTSRC9 Position */ #define GPIO_INTSRC_INTSRC9_Msk (0x1ul << GPIO_INTSRC_INTSRC9_Pos) /*!< GPIO_T::INTSRC: INTSRC9 Mask */ #define GPIO_INTSRC_INTSRC10_Pos (10) /*!< GPIO_T::INTSRC: INTSRC10 Position */ #define GPIO_INTSRC_INTSRC10_Msk (0x1ul << GPIO_INTSRC_INTSRC10_Pos) /*!< GPIO_T::INTSRC: INTSRC10 Mask */ #define GPIO_INTSRC_INTSRC11_Pos (11) /*!< GPIO_T::INTSRC: INTSRC11 Position */ #define GPIO_INTSRC_INTSRC11_Msk (0x1ul << GPIO_INTSRC_INTSRC11_Pos) /*!< GPIO_T::INTSRC: INTSRC11 Mask */ #define GPIO_INTSRC_INTSRC12_Pos (12) /*!< GPIO_T::INTSRC: INTSRC12 Position */ #define GPIO_INTSRC_INTSRC12_Msk (0x1ul << GPIO_INTSRC_INTSRC12_Pos) /*!< GPIO_T::INTSRC: INTSRC12 Mask */ #define GPIO_INTSRC_INTSRC13_Pos (13) /*!< GPIO_T::INTSRC: INTSRC13 Position */ #define GPIO_INTSRC_INTSRC13_Msk (0x1ul << GPIO_INTSRC_INTSRC13_Pos) /*!< GPIO_T::INTSRC: INTSRC13 Mask */ #define GPIO_INTSRC_INTSRC14_Pos (14) /*!< GPIO_T::INTSRC: INTSRC14 Position */ #define GPIO_INTSRC_INTSRC14_Msk (0x1ul << GPIO_INTSRC_INTSRC14_Pos) /*!< GPIO_T::INTSRC: INTSRC14 Mask */ #define GPIO_INTSRC_INTSRC15_Pos (15) /*!< GPIO_T::INTSRC: INTSRC15 Position */ #define GPIO_INTSRC_INTSRC15_Msk (0x1ul << GPIO_INTSRC_INTSRC15_Pos) /*!< GPIO_T::INTSRC: INTSRC15 Mask */ #define GPIO_SMTEN_SMTEN0_Pos (0) /*!< GPIO_T::SMTEN: SMTEN0 Position */ #define GPIO_SMTEN_SMTEN0_Msk (0x1ul << GPIO_SMTEN_SMTEN0_Pos) /*!< GPIO_T::SMTEN: SMTEN0 Mask */ #define GPIO_SMTEN_SMTEN1_Pos (1) /*!< GPIO_T::SMTEN: SMTEN1 Position */ #define GPIO_SMTEN_SMTEN1_Msk (0x1ul << GPIO_SMTEN_SMTEN1_Pos) /*!< GPIO_T::SMTEN: SMTEN1 Mask */ #define GPIO_SMTEN_SMTEN2_Pos (2) /*!< GPIO_T::SMTEN: SMTEN2 Position */ #define GPIO_SMTEN_SMTEN2_Msk (0x1ul << GPIO_SMTEN_SMTEN2_Pos) /*!< GPIO_T::SMTEN: SMTEN2 Mask */ #define GPIO_SMTEN_SMTEN3_Pos (3) /*!< GPIO_T::SMTEN: SMTEN3 Position */ #define GPIO_SMTEN_SMTEN3_Msk (0x1ul << GPIO_SMTEN_SMTEN3_Pos) /*!< GPIO_T::SMTEN: SMTEN3 Mask */ #define GPIO_SMTEN_SMTEN4_Pos (4) /*!< GPIO_T::SMTEN: SMTEN4 Position */ #define GPIO_SMTEN_SMTEN4_Msk (0x1ul << GPIO_SMTEN_SMTEN4_Pos) /*!< GPIO_T::SMTEN: SMTEN4 Mask */ #define GPIO_SMTEN_SMTEN5_Pos (5) /*!< GPIO_T::SMTEN: SMTEN5 Position */ #define GPIO_SMTEN_SMTEN5_Msk (0x1ul << GPIO_SMTEN_SMTEN5_Pos) /*!< GPIO_T::SMTEN: SMTEN5 Mask */ #define GPIO_SMTEN_SMTEN6_Pos (6) /*!< GPIO_T::SMTEN: SMTEN6 Position */ #define GPIO_SMTEN_SMTEN6_Msk (0x1ul << GPIO_SMTEN_SMTEN6_Pos) /*!< GPIO_T::SMTEN: SMTEN6 Mask */ #define GPIO_SMTEN_SMTEN7_Pos (7) /*!< GPIO_T::SMTEN: SMTEN7 Position */ #define GPIO_SMTEN_SMTEN7_Msk (0x1ul << GPIO_SMTEN_SMTEN7_Pos) /*!< GPIO_T::SMTEN: SMTEN7 Mask */ #define GPIO_SMTEN_SMTEN8_Pos (8) /*!< GPIO_T::SMTEN: SMTEN8 Position */ #define GPIO_SMTEN_SMTEN8_Msk (0x1ul << GPIO_SMTEN_SMTEN8_Pos) /*!< GPIO_T::SMTEN: SMTEN8 Mask */ #define GPIO_SMTEN_SMTEN9_Pos (9) /*!< GPIO_T::SMTEN: SMTEN9 Position */ #define GPIO_SMTEN_SMTEN9_Msk (0x1ul << GPIO_SMTEN_SMTEN9_Pos) /*!< GPIO_T::SMTEN: SMTEN9 Mask */ #define GPIO_SMTEN_SMTEN10_Pos (10) /*!< GPIO_T::SMTEN: SMTEN10 Position */ #define GPIO_SMTEN_SMTEN10_Msk (0x1ul << GPIO_SMTEN_SMTEN10_Pos) /*!< GPIO_T::SMTEN: SMTEN10 Mask */ #define GPIO_SMTEN_SMTEN11_Pos (11) /*!< GPIO_T::SMTEN: SMTEN11 Position */ #define GPIO_SMTEN_SMTEN11_Msk (0x1ul << GPIO_SMTEN_SMTEN11_Pos) /*!< GPIO_T::SMTEN: SMTEN11 Mask */ #define GPIO_SMTEN_SMTEN12_Pos (12) /*!< GPIO_T::SMTEN: SMTEN12 Position */ #define GPIO_SMTEN_SMTEN12_Msk (0x1ul << GPIO_SMTEN_SMTEN12_Pos) /*!< GPIO_T::SMTEN: SMTEN12 Mask */ #define GPIO_SMTEN_SMTEN13_Pos (13) /*!< GPIO_T::SMTEN: SMTEN13 Position */ #define GPIO_SMTEN_SMTEN13_Msk (0x1ul << GPIO_SMTEN_SMTEN13_Pos) /*!< GPIO_T::SMTEN: SMTEN13 Mask */ #define GPIO_SMTEN_SMTEN14_Pos (14) /*!< GPIO_T::SMTEN: SMTEN14 Position */ #define GPIO_SMTEN_SMTEN14_Msk (0x1ul << GPIO_SMTEN_SMTEN14_Pos) /*!< GPIO_T::SMTEN: SMTEN14 Mask */ #define GPIO_SMTEN_SMTEN15_Pos (15) /*!< GPIO_T::SMTEN: SMTEN15 Position */ #define GPIO_SMTEN_SMTEN15_Msk (0x1ul << GPIO_SMTEN_SMTEN15_Pos) /*!< GPIO_T::SMTEN: SMTEN15 Mask */ #define GPIO_SLEWCTL_HSREN0_Pos (0) /*!< GPIO_T::SLEWCTL: HSREN0 Position */ #define GPIO_SLEWCTL_HSREN0_Msk (0x1ul << GPIO_SLEWCTL_HSREN0_Pos) /*!< GPIO_T::SLEWCTL: HSREN0 Mask */ #define GPIO_SLEWCTL_HSREN1_Pos (1) /*!< GPIO_T::SLEWCTL: HSREN1 Position */ #define GPIO_SLEWCTL_HSREN1_Msk (0x1ul << GPIO_SLEWCTL_HSREN1_Pos) /*!< GPIO_T::SLEWCTL: HSREN1 Mask */ #define GPIO_SLEWCTL_HSREN2_Pos (2) /*!< GPIO_T::SLEWCTL: HSREN2 Position */ #define GPIO_SLEWCTL_HSREN2_Msk (0x1ul << GPIO_SLEWCTL_HSREN2_Pos) /*!< GPIO_T::SLEWCTL: HSREN2 Mask */ #define GPIO_SLEWCTL_HSREN3_Pos (3) /*!< GPIO_T::SLEWCTL: HSREN3 Position */ #define GPIO_SLEWCTL_HSREN3_Msk (0x1ul << GPIO_SLEWCTL_HSREN3_Pos) /*!< GPIO_T::SLEWCTL: HSREN3 Mask */ #define GPIO_SLEWCTL_HSREN4_Pos (4) /*!< GPIO_T::SLEWCTL: HSREN4 Position */ #define GPIO_SLEWCTL_HSREN4_Msk (0x1ul << GPIO_SLEWCTL_HSREN4_Pos) /*!< GPIO_T::SLEWCTL: HSREN4 Mask */ #define GPIO_SLEWCTL_HSREN5_Pos (5) /*!< GPIO_T::SLEWCTL: HSREN5 Position */ #define GPIO_SLEWCTL_HSREN5_Msk (0x1ul << GPIO_SLEWCTL_HSREN5_Pos) /*!< GPIO_T::SLEWCTL: HSREN5 Mask */ #define GPIO_SLEWCTL_HSREN6_Pos (6) /*!< GPIO_T::SLEWCTL: HSREN6 Position */ #define GPIO_SLEWCTL_HSREN6_Msk (0x1ul << GPIO_SLEWCTL_HSREN6_Pos) /*!< GPIO_T::SLEWCTL: HSREN6 Mask */ #define GPIO_SLEWCTL_HSREN7_Pos (7) /*!< GPIO_T::SLEWCTL: HSREN7 Position */ #define GPIO_SLEWCTL_HSREN7_Msk (0x1ul << GPIO_SLEWCTL_HSREN7_Pos) /*!< GPIO_T::SLEWCTL: HSREN7 Mask */ #define GPIO_SLEWCTL_HSREN8_Pos (8) /*!< GPIO_T::SLEWCTL: HSREN8 Position */ #define GPIO_SLEWCTL_HSREN8_Msk (0x1ul << GPIO_SLEWCTL_HSREN8_Pos) /*!< GPIO_T::SLEWCTL: HSREN8 Mask */ #define GPIO_SLEWCTL_HSREN9_Pos (9) /*!< GPIO_T::SLEWCTL: HSREN9 Position */ #define GPIO_SLEWCTL_HSREN9_Msk (0x1ul << GPIO_SLEWCTL_HSREN9_Pos) /*!< GPIO_T::SLEWCTL: HSREN9 Mask */ #define GPIO_SLEWCTL_HSREN10_Pos (10) /*!< GPIO_T::SLEWCTL: HSREN10 Position */ #define GPIO_SLEWCTL_HSREN10_Msk (0x1ul << GPIO_SLEWCTL_HSREN10_Pos) /*!< GPIO_T::SLEWCTL: HSREN10 Mask */ #define GPIO_SLEWCTL_HSREN11_Pos (11) /*!< GPIO_T::SLEWCTL: HSREN11 Position */ #define GPIO_SLEWCTL_HSREN11_Msk (0x1ul << GPIO_SLEWCTL_HSREN11_Pos) /*!< GPIO_T::SLEWCTL: HSREN11 Mask */ #define GPIO_SLEWCTL_HSREN12_Pos (12) /*!< GPIO_T::SLEWCTL: HSREN12 Position */ #define GPIO_SLEWCTL_HSREN12_Msk (0x1ul << GPIO_SLEWCTL_HSREN12_Pos) /*!< GPIO_T::SLEWCTL: HSREN12 Mask */ #define GPIO_SLEWCTL_HSREN13_Pos (13) /*!< GPIO_T::SLEWCTL: HSREN13 Position */ #define GPIO_SLEWCTL_HSREN13_Msk (0x1ul << GPIO_SLEWCTL_HSREN13_Pos) /*!< GPIO_T::SLEWCTL: HSREN13 Mask */ #define GPIO_SLEWCTL_HSREN14_Pos (14) /*!< GPIO_T::SLEWCTL: HSREN14 Position */ #define GPIO_SLEWCTL_HSREN14_Msk (0x1ul << GPIO_SLEWCTL_HSREN14_Pos) /*!< GPIO_T::SLEWCTL: HSREN14 Mask */ #define GPIO_SLEWCTL_HSREN15_Pos (15) /*!< GPIO_T::SLEWCTL: HSREN15 Position */ #define GPIO_SLEWCTL_HSREN15_Msk (0x1ul << GPIO_SLEWCTL_HSREN15_Pos) /*!< GPIO_T::SLEWCTL: HSREN15 Mask */ #define GPIO_PUSEL_PUSEL0_Pos (0) /*!< GPIO_T::PUSEL: PUSEL0 Position */ #define GPIO_PUSEL_PUSEL0_Msk (0x3ul << GPIO_PUSEL_PUSEL0_Pos) /*!< GPIO_T::PUSEL: PUSEL0 Mask */ #define GPIO_PUSEL_PUSEL1_Pos (2) /*!< GPIO_T::PUSEL: PUSEL1 Position */ #define GPIO_PUSEL_PUSEL1_Msk (0x3ul << GPIO_PUSEL_PUSEL1_Pos) /*!< GPIO_T::PUSEL: PUSEL1 Mask */ #define GPIO_PUSEL_PUSEL2_Pos (4) /*!< GPIO_T::PUSEL: PUSEL2 Position */ #define GPIO_PUSEL_PUSEL2_Msk (0x3ul << GPIO_PUSEL_PUSEL2_Pos) /*!< GPIO_T::PUSEL: PUSEL2 Mask */ #define GPIO_PUSEL_PUSEL3_Pos (6) /*!< GPIO_T::PUSEL: PUSEL3 Position */ #define GPIO_PUSEL_PUSEL3_Msk (0x3ul << GPIO_PUSEL_PUSEL3_Pos) /*!< GPIO_T::PUSEL: PUSEL3 Mask */ #define GPIO_PUSEL_PUSEL4_Pos (8) /*!< GPIO_T::PUSEL: PUSEL4 Position */ #define GPIO_PUSEL_PUSEL4_Msk (0x3ul << GPIO_PUSEL_PUSEL4_Pos) /*!< GPIO_T::PUSEL: PUSEL4 Mask */ #define GPIO_PUSEL_PUSEL5_Pos (10) /*!< GPIO_T::PUSEL: PUSEL5 Position */ #define GPIO_PUSEL_PUSEL5_Msk (0x3ul << GPIO_PUSEL_PUSEL5_Pos) /*!< GPIO_T::PUSEL: PUSEL5 Mask */ #define GPIO_PUSEL_PUSEL6_Pos (12) /*!< GPIO_T::PUSEL: PUSEL6 Position */ #define GPIO_PUSEL_PUSEL6_Msk (0x3ul << GPIO_PUSEL_PUSEL6_Pos) /*!< GPIO_T::PUSEL: PUSEL6 Mask */ #define GPIO_PUSEL_PUSEL7_Pos (14) /*!< GPIO_T::PUSEL: PUSEL7 Position */ #define GPIO_PUSEL_PUSEL7_Msk (0x3ul << GPIO_PUSEL_PUSEL7_Pos) /*!< GPIO_T::PUSEL: PUSEL7 Mask */ #define GPIO_PUSEL_PUSEL8_Pos (16) /*!< GPIO_T::PUSEL: PUSEL8 Position */ #define GPIO_PUSEL_PUSEL8_Msk (0x3ul << GPIO_PUSEL_PUSEL8_Pos) /*!< GPIO_T::PUSEL: PUSEL8 Mask */ #define GPIO_PUSEL_PUSEL9_Pos (18) /*!< GPIO_T::PUSEL: PUSEL9 Position */ #define GPIO_PUSEL_PUSEL9_Msk (0x3ul << GPIO_PUSEL_PUSEL9_Pos) /*!< GPIO_T::PUSEL: PUSEL9 Mask */ #define GPIO_PUSEL_PUSEL10_Pos (20) /*!< GPIO_T::PUSEL: PUSEL10 Position */ #define GPIO_PUSEL_PUSEL10_Msk (0x3ul << GPIO_PUSEL_PUSEL10_Pos) /*!< GPIO_T::PUSEL: PUSEL10 Mask */ #define GPIO_PUSEL_PUSEL11_Pos (22) /*!< GPIO_T::PUSEL: PUSEL11 Position */ #define GPIO_PUSEL_PUSEL11_Msk (0x3ul << GPIO_PUSEL_PUSEL11_Pos) /*!< GPIO_T::PUSEL: PUSEL11 Mask */ #define GPIO_PUSEL_PUSEL12_Pos (24) /*!< GPIO_T::PUSEL: PUSEL12 Position */ #define GPIO_PUSEL_PUSEL12_Msk (0x3ul << GPIO_PUSEL_PUSEL12_Pos) /*!< GPIO_T::PUSEL: PUSEL12 Mask */ #define GPIO_PUSEL_PUSEL13_Pos (26) /*!< GPIO_T::PUSEL: PUSEL13 Position */ #define GPIO_PUSEL_PUSEL13_Msk (0x3ul << GPIO_PUSEL_PUSEL13_Pos) /*!< GPIO_T::PUSEL: PUSEL13 Mask */ #define GPIO_PUSEL_PUSEL14_Pos (28) /*!< GPIO_T::PUSEL: PUSEL14 Position */ #define GPIO_PUSEL_PUSEL14_Msk (0x3ul << GPIO_PUSEL_PUSEL14_Pos) /*!< GPIO_T::PUSEL: PUSEL14 Mask */ #define GPIO_PUSEL_PUSEL15_Pos (30) /*!< GPIO_T::PUSEL: PUSEL15 Position */ #define GPIO_PUSEL_PUSEL15_Msk (0x3ul << GPIO_PUSEL_PUSEL15_Pos) /*!< GPIO_T::PUSEL: PUSEL15 Mask */ #define GPIO_DBCTL_DBCLKSEL_Pos (0) /*!< GPIO_T::DBCTL: DBCLKSEL Position */ #define GPIO_DBCTL_DBCLKSEL_Msk (0xful << GPIO_DBCTL_DBCLKSEL_Pos) /*!< GPIO_T::DBCTL: DBCLKSEL Mask */ #define GPIO_DBCTL_DBCLKSRC_Pos (4) /*!< GPIO_T::DBCTL: DBCLKSRC Position */ #define GPIO_DBCTL_DBCLKSRC_Msk (0x1ul << GPIO_DBCTL_DBCLKSRC_Pos) /*!< GPIO_T::DBCTL: DBCLKSRC Mask */ #define GPIO_DBCTL_ICLKON_Pos (5) /*!< GPIO_T::DBCTL: ICLKON Position */ #define GPIO_DBCTL_ICLKON_Msk (0x1ul << GPIO_DBCTL_ICLKON_Pos) /*!< GPIO_T::DBCTL: ICLKON Mask */ /**@}*/ /* GPIO_CONST */ /**@}*/ /* end of GPIO register group */ #endif /* __GPIO_REG_H__ */