![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
mbed-os/targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_K82F/drivers/fsl_sim.h
- Committer:
- kadonotakashi
- Date:
- 2018-10-10
- Revision:
- 0:8fdf9a60065b
File content as of revision 0:8fdf9a60065b:
/* * Copyright (c) 2015, Freescale Semiconductor, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * o Redistributions of source code must retain the above copyright notice, this list * of conditions and the following disclaimer. * * o Redistributions in binary form must reproduce the above copyright notice, this * list of conditions and the following disclaimer in the documentation and/or * other materials provided with the distribution. * * o Neither the name of Freescale Semiconductor, Inc. nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _FSL_SIM_H_ #define _FSL_SIM_H_ #include "fsl_common.h" /*! @addtogroup sim */ /*! @{*/ /******************************************************************************* * Definitions *******************************************************************************/ /*! @name Driver version */ /*@{*/ #define FSL_SIM_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) /*!< Driver version 2.0.0 */ /*@}*/ #if (defined(FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR) && FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR) /*!@brief USB voltage regulator enable setting. */ enum _sim_usb_volt_reg_enable_mode { kSIM_UsbVoltRegEnable = SIM_SOPT1_USBREGEN_MASK, /*!< Enable voltage regulator. */ kSIM_UsbVoltRegEnableInLowPower = SIM_SOPT1_USBVSTBY_MASK, /*!< Enable voltage regulator in VLPR/VLPW modes. */ kSIM_UsbVoltRegEnableInStop = SIM_SOPT1_USBSSTBY_MASK, /*!< Enable voltage regulator in STOP/VLPS/LLS/VLLS modes. */ kSIM_UsbVoltRegEnableInAllModes = SIM_SOPT1_USBREGEN_MASK | SIM_SOPT1_USBSSTBY_MASK | SIM_SOPT1_USBVSTBY_MASK /*!< Enable voltage regulator in all power modes. */ }; #endif /* (defined(FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR) && FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR) */ /*!@brief Unique ID. */ typedef struct _sim_uid { #if defined(SIM_UIDH) uint32_t H; /*!< UIDH. */ #endif uint32_t MH; /*!< UIDMH. */ uint32_t ML; /*!< UIDML. */ uint32_t L; /*!< UIDL. */ } sim_uid_t; /*!@brief Flash enable mode. */ enum _sim_flash_mode { kSIM_FlashDisableInWait = SIM_FCFG1_FLASHDOZE_MASK, /*!< Disable flash in wait mode. */ kSIM_FlashDisable = SIM_FCFG1_FLASHDIS_MASK /*!< Disable flash in normal mode. */ }; /******************************************************************************* * API ******************************************************************************/ #if defined(__cplusplus) extern "C" { #endif /* __cplusplus*/ #if (defined(FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR) && FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR) /*! * @brief Sets the USB voltage regulator setting. * * This function configures whether the USB voltage regulator is enabled in * normal RUN mode, STOP/VLPS/LLS/VLLS modes, and VLPR/VLPW modes. The configurations * are passed in as mask value of \ref _sim_usb_volt_reg_enable_mode. For example, to enable * USB voltage regulator in RUN/VLPR/VLPW modes and disable in STOP/VLPS/LLS/VLLS mode, * use: * * SIM_SetUsbVoltRegulatorEnableMode(kSIM_UsbVoltRegEnable | kSIM_UsbVoltRegEnableInLowPower); * * @param mask USB voltage regulator enable setting. */ void SIM_SetUsbVoltRegulatorEnableMode(uint32_t mask); #endif /* FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR */ /*! * @brief Gets the unique identification register value. * * @param uid Pointer to the structure to save the UID value. */ void SIM_GetUniqueId(sim_uid_t *uid); /*! * @brief Sets the flash enable mode. * * @param mode The mode to set; see \ref _sim_flash_mode for mode details. */ static inline void SIM_SetFlashMode(uint8_t mode) { SIM->FCFG1 = mode; } #if defined(__cplusplus) } #endif /* __cplusplus*/ /*! @}*/ #endif /* _FSL_SIM_H_ */