![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
mbed-os/targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_K82F/device/system_MK82F25615.c
- Committer:
- kadonotakashi
- Date:
- 2018-10-10
- Revision:
- 0:8fdf9a60065b
File content as of revision 0:8fdf9a60065b:
/* ** ################################################################### ** Processors: MK82FN256CAx15 ** MK82FN256VDC15 ** MK82FN256VLL15 ** MK82FN256VLQ15 ** ** Compilers: Keil ARM C/C++ Compiler ** Freescale C/C++ for Embedded ARM ** GNU C Compiler ** IAR ANSI C/C++ Compiler for ARM ** ** Reference manual: K82P121M150SF5RM, Rev. 0, May 2015 ** Version: rev. 1.2, 2015-07-29 ** Build: b151216 ** ** Abstract: ** Provides a system configuration function and a global variable that ** contains the system frequency. It configures the device and initializes ** the oscillator (PLL) that is part of the microcontroller device. ** ** Copyright (c) 2015 Freescale Semiconductor, Inc. ** All rights reserved. ** ** Redistribution and use in source and binary forms, with or without modification, ** are permitted provided that the following conditions are met: ** ** o Redistributions of source code must retain the above copyright notice, this list ** of conditions and the following disclaimer. ** ** o Redistributions in binary form must reproduce the above copyright notice, this ** list of conditions and the following disclaimer in the documentation and/or ** other materials provided with the distribution. ** ** o Neither the name of Freescale Semiconductor, Inc. nor the names of its ** contributors may be used to endorse or promote products derived from this ** software without specific prior written permission. ** ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ** ** http: www.freescale.com ** mail: support@freescale.com ** ** Revisions: ** - rev. 1.0 (2015-04-09) ** Initial version ** - rev. 1.1 (2015-05-28) ** Update according to the reference manual Rev. 0. ** - rev. 1.2 (2015-07-29) ** Correction of backward compatibility. ** ** ################################################################### */ /*! * @file MK82F25615 * @version 1.2 * @date 2015-07-29 * @brief Device specific configuration file for MK82F25615 (implementation file) * * Provides a system configuration function and a global variable that contains * the system frequency. It configures the device and initializes the oscillator * (PLL) that is part of the microcontroller device. */ #include <stdint.h> #include "fsl_device_registers.h" /* ---------------------------------------------------------------------------- -- Core clock ---------------------------------------------------------------------------- */ uint32_t SystemCoreClock = DEFAULT_SYSTEM_CLOCK; /* ---------------------------------------------------------------------------- -- SystemInit() ---------------------------------------------------------------------------- */ void SystemInit (void) { #if ((__FPU_PRESENT == 1) && (__FPU_USED == 1)) SCB->CPACR |= ((3UL << 10*2) | (3UL << 11*2)); /* set CP10, CP11 Full Access */ #endif /* ((__FPU_PRESENT == 1) && (__FPU_USED == 1)) */ #if (DISABLE_WDOG) /* WDOG->UNLOCK: WDOGUNLOCK=0xC520 */ WDOG->UNLOCK = WDOG_UNLOCK_WDOGUNLOCK(0xC520); /* Key 1 */ /* WDOG->UNLOCK: WDOGUNLOCK=0xD928 */ WDOG->UNLOCK = WDOG_UNLOCK_WDOGUNLOCK(0xD928); /* Key 2 */ /* WDOG->STCTRLH: ?=0,DISTESTWDOG=0,BYTESEL=0,TESTSEL=0,TESTWDOG=0,?=0,?=1,WAITEN=1,STOPEN=1,DBGEN=0,ALLOWUPDATE=1,WINEN=0,IRQRSTEN=0,CLKSRC=1,WDOGEN=0 */ WDOG->STCTRLH = WDOG_STCTRLH_BYTESEL(0x00) | WDOG_STCTRLH_WAITEN_MASK | WDOG_STCTRLH_STOPEN_MASK | WDOG_STCTRLH_ALLOWUPDATE_MASK | WDOG_STCTRLH_CLKSRC_MASK | 0x0100U; #endif /* (DISABLE_WDOG) */ } /* ---------------------------------------------------------------------------- -- SystemCoreClockUpdate() ---------------------------------------------------------------------------- */ void SystemCoreClockUpdate (void) { uint32_t MCGOUTClock; /* Variable to store output clock frequency of the MCG module */ uint16_t Divider; if ((MCG->C1 & MCG_C1_CLKS_MASK) == 0x00U) { /* Output of FLL or PLL is selected */ if ((MCG->C6 & MCG_C6_PLLS_MASK) == 0x00U) { /* FLL is selected */ if ((MCG->C1 & MCG_C1_IREFS_MASK) == 0x00U) { /* External reference clock is selected */ switch (MCG->C7 & MCG_C7_OSCSEL_MASK) { case 0x00U: MCGOUTClock = CPU_XTAL_CLK_HZ; /* System oscillator drives MCG clock */ break; case 0x01U: MCGOUTClock = CPU_XTAL32k_CLK_HZ; /* RTC 32 kHz oscillator drives MCG clock */ break; case 0x02U: default: MCGOUTClock = CPU_INT_IRC_CLK_HZ; /* IRC 48MHz oscillator drives MCG clock */ break; } if (((MCG->C2 & MCG_C2_RANGE_MASK) != 0x00U) && ((MCG->C7 & MCG_C7_OSCSEL_MASK) != 0x01U)) { switch (MCG->C1 & MCG_C1_FRDIV_MASK) { case 0x38U: Divider = 1536U; break; case 0x30U: Divider = 1280U; break; default: Divider = (uint16_t)(32LU << ((MCG->C1 & MCG_C1_FRDIV_MASK) >> MCG_C1_FRDIV_SHIFT)); break; } } else {/* ((MCG->C2 & MCG_C2_RANGE_MASK) != 0x00U) */ Divider = (uint16_t)(1LU << ((MCG->C1 & MCG_C1_FRDIV_MASK) >> MCG_C1_FRDIV_SHIFT)); } MCGOUTClock = (MCGOUTClock / Divider); /* Calculate the divided FLL reference clock */ } else { /* (!((MCG->C1 & MCG_C1_IREFS_MASK) == 0x00U)) */ MCGOUTClock = CPU_INT_SLOW_CLK_HZ; /* The slow internal reference clock is selected */ } /* (!((MCG->C1 & MCG_C1_IREFS_MASK) == 0x00U)) */ /* Select correct multiplier to calculate the MCG output clock */ switch (MCG->C4 & (MCG_C4_DMX32_MASK | MCG_C4_DRST_DRS_MASK)) { case 0x00U: MCGOUTClock *= 640U; break; case 0x20U: MCGOUTClock *= 1280U; break; case 0x40U: MCGOUTClock *= 1920U; break; case 0x60U: MCGOUTClock *= 2560U; break; case 0x80U: MCGOUTClock *= 732U; break; case 0xA0U: MCGOUTClock *= 1464U; break; case 0xC0U: MCGOUTClock *= 2197U; break; case 0xE0U: MCGOUTClock *= 2929U; break; default: break; } } else { /* (!((MCG->C6 & MCG_C6_PLLS_MASK) == 0x00U)) */ /* PLL is selected */ Divider = (((uint16_t)MCG->C5 & MCG_C5_PRDIV_MASK) + 0x01U); MCGOUTClock = (uint32_t)(CPU_XTAL_CLK_HZ / Divider); /* Calculate the PLL reference clock */ Divider = (((uint16_t)MCG->C6 & MCG_C6_VDIV_MASK) + 16U); MCGOUTClock *= Divider; /* Calculate the VCO output clock */ MCGOUTClock /= 2; /* Calculate the MCG output clock */ } /* (!((MCG->C6 & MCG_C6_PLLS_MASK) == 0x00U)) */ } else if ((MCG->C1 & MCG_C1_CLKS_MASK) == 0x40U) { /* Internal reference clock is selected */ if ((MCG->C2 & MCG_C2_IRCS_MASK) == 0x00U) { MCGOUTClock = CPU_INT_SLOW_CLK_HZ; /* Slow internal reference clock selected */ } else { /* (!((MCG->C2 & MCG_C2_IRCS_MASK) == 0x00U)) */ Divider = (uint16_t)(0x01LU << ((MCG->SC & MCG_SC_FCRDIV_MASK) >> MCG_SC_FCRDIV_SHIFT)); MCGOUTClock = (uint32_t) (CPU_INT_FAST_CLK_HZ / Divider); /* Fast internal reference clock selected */ } /* (!((MCG->C2 & MCG_C2_IRCS_MASK) == 0x00U)) */ } else if ((MCG->C1 & MCG_C1_CLKS_MASK) == 0x80U) { /* External reference clock is selected */ switch (MCG->C7 & MCG_C7_OSCSEL_MASK) { case 0x00U: MCGOUTClock = CPU_XTAL_CLK_HZ; /* System oscillator drives MCG clock */ break; case 0x01U: MCGOUTClock = CPU_XTAL32k_CLK_HZ; /* RTC 32 kHz oscillator drives MCG clock */ break; case 0x02U: default: MCGOUTClock = CPU_INT_IRC_CLK_HZ; /* IRC 48MHz oscillator drives MCG clock */ break; } } else { /* (!((MCG->C1 & MCG_C1_CLKS_MASK) == 0x80U)) */ /* Reserved value */ return; } /* (!((MCG->C1 & MCG_C1_CLKS_MASK) == 0x80U)) */ SystemCoreClock = (MCGOUTClock / (0x01U + ((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV1_MASK) >> SIM_CLKDIV1_OUTDIV1_SHIFT))); }