![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
Diff: mbed-os/targets/TARGET_NUVOTON/TARGET_M2351/device/Reg/ecap_reg.h
- Revision:
- 0:8fdf9a60065b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-os/targets/TARGET_NUVOTON/TARGET_M2351/device/Reg/ecap_reg.h Wed Oct 10 00:33:53 2018 +0000 @@ -0,0 +1,377 @@ +/**************************************************************************//** + * @file ecap_reg.h + * @version V1.00 + * @brief ECAP register definition header file + * + * @copyright (C) 2017 Nuvoton Technology Corp. All rights reserved. + *****************************************************************************/ +#ifndef __ECAP_REG_H__ +#define __ECAP_REG_H__ + +/*---------------------- Enhanced Input Capture Timer -------------------------*/ +/** + @addtogroup ECAP Enhanced Input Capture Timer(ECAP) + Memory Mapped Structure for ECAP Controller +@{ */ + +typedef struct +{ + + /** + * @var ECAP_T::CNT + * Offset: 0x00 Input Capture Counter (24-bit up counter) + * --------------------------------------------------------------------------------------------------- + * |Bits |Field |Descriptions + * | :----: | :----: | :---- | + * |[23:0] |CNT |Input Capture Timer/Counter + * | | |The input Capture Timer/Counter is a 24-bit up-counting counter + * | | |The clock source for the counter is from the clock divider + * @var ECAP_T::HLD0 + * Offset: 0x04 Input Capture Hold Register 0 + * --------------------------------------------------------------------------------------------------- + * |Bits |Field |Descriptions + * | :----: | :----: | :---- | + * |[23:0] |HOLD |Input Capture Counter Hold Register + * | | |When an active input capture channel detects a valid edge signal change, the ECAPCNT value is latched into the corresponding holding register + * | | |Each input channel has its own holding register named by ECAP_HLDx where x is from 0 to 2 to indicate inputs from IC0 to IC2, respectively. + * @var ECAP_T::HLD1 + * Offset: 0x08 Input Capture Hold Register 1 + * --------------------------------------------------------------------------------------------------- + * |Bits |Field |Descriptions + * | :----: | :----: | :---- | + * |[23:0] |HOLD |Input Capture Counter Hold Register + * | | |When an active input capture channel detects a valid edge signal change, the ECAPCNT value is latched into the corresponding holding register + * | | |Each input channel has its own holding register named by ECAP_HLDx where x is from 0 to 2 to indicate inputs from IC0 to IC2, respectively. + * @var ECAP_T::HLD2 + * Offset: 0x0C Input Capture Hold Register 2 + * --------------------------------------------------------------------------------------------------- + * |Bits |Field |Descriptions + * | :----: | :----: | :---- | + * |[23:0] |HOLD |Input Capture Counter Hold Register + * | | |When an active input capture channel detects a valid edge signal change, the ECAPCNT value is latched into the corresponding holding register + * | | |Each input channel has its own holding register named by ECAP_HLDx where x is from 0 to 2 to indicate inputs from IC0 to IC2, respectively. + * @var ECAP_T::CNTCMP + * Offset: 0x10 Input Capture Compare Register + * --------------------------------------------------------------------------------------------------- + * |Bits |Field |Descriptions + * | :----: | :----: | :---- | + * |[23:0] |CNTCMP |Input Capture Counter Compare Register + * | | |If the compare function is enabled (CMPEN = 1), this register (ECAP_CNTCMP) is used to compare with the capture counter (ECAP_CNT). + * | | |If the reload control is enabled (RLDEN[n] = 1, n=0~3), an overflow event or capture events will trigger the hardware to load the value of this register (ECAP_CNTCMP) into ECAP_CNT. + * @var ECAP_T::CTL0 + * Offset: 0x14 Input Capture Control Register 0 + * --------------------------------------------------------------------------------------------------- + * |Bits |Field |Descriptions + * | :----: | :----: | :---- | + * |[2:0] |NFCLKSEL |Noise Filter Clock Pre-divide Selection + * | | |To determine the sampling frequency of the Noise Filter clock + * | | |000 = CAP_CLK. + * | | |001 = CAP_CLK/2. + * | | |010 = CAP_CLK/4. + * | | |011 = CAP_CLK/16. + * | | |100 = CAP_CLK/32. + * | | |101 = CAP_CLK/64. + * |[3] |CAPNFDIS |Input Capture Noise Filter Disable Control + * | | |0 = Noise filter of Input Capture Enabled. + * | | |1 = Noise filter of Input Capture Disabled (Bypass). + * |[4] |IC0EN |Port Pin IC0 Input to Input Capture Unit Enable Control + * | | |0 = IC0 input to Input Capture Unit Disabled. + * | | |1 = IC0 input to Input Capture Unit Enabled. + * |[5] |IC1EN |Port Pin IC1 Input to Input Capture Unit Enable Control + * | | |0 = IC1 input to Input Capture Unit Disabled. + * | | |1 = IC1 input to Input Capture Unit Enabled. + * |[6] |IC2EN |Port Pin IC2 Input to Input Capture Unit Enable Control + * | | |0 = IC2 input to Input Capture Unit Disabled. + * | | |1 = IC2 input to Input Capture Unit Enabled. + * |[9:8] |CAPSEL0 |CAP0 Input Source Selection + * | | |00 = CAP0 input is from port pin ICAP0. + * | | |01 = Reserved. + * | | |10 = CAP0 input is from signal CHA of QEI controller unit n. + * | | |11 = Reserved. + * | | |Note: Input capture unit n matches QEIn, where n = 0~1. + * |[11:10] |CAPSEL1 |CAP1 Input Source Selection + * | | |00 = CAP1 input is from port pin ICAP1. + * | | |01 = Reserved. + * | | |10 = CAP1 input is from signal CHB of QEI controller unit n. + * | | |11 = Reserved. + * | | |Note: Input capture unit n matches QEIn, where n = 0~1. + * |[13:12] |CAPSEL2 |CAP2 Input Source Selection + * | | |00 = CAP2 input is from port pin ICAP2. + * | | |01 = Reserved. + * | | |10 = CAP2 input is from signal CHX of QEI controller unit n. + * | | |11 = Reserved. + * | | |Note: Input capture unit n matches QEIn, where n = 0~1. + * |[16] |CAPIEN0 |Input Capture Channel 0 Interrupt Enable Control + * | | |0 = The flag CAPTF0 can trigger Input Capture interrupt Disabled. + * | | |1 = The flag CAPTF0 can trigger Input Capture interrupt Enabled. + * |[17] |CAPIEN1 |Input Capture Channel 1 Interrupt Enable Control + * | | |0 = The flag CAPTF1 can trigger Input Capture interrupt Disabled. + * | | |1 = The flag CAPTF1 can trigger Input Capture interrupt Enabled. + * |[18] |CAPIEN2 |Input Capture Channel 2 Interrupt Enable Control + * | | |0 = The flag CAPTF2 can trigger Input Capture interrupt Disabled. + * | | |1 = The flag CAPTF2 can trigger Input Capture interrupt Enabled. + * |[20] |OVIEN |CAPOVF Trigger Input Capture Interrupt Enable Control + * | | |0 = The flag CAPOVF can trigger Input Capture interrupt Disabled. + * | | |1 = The flag CAPOVF can trigger Input Capture interrupt Enabled. + * |[21] |CMPIEN |CAPCMPF Trigger Input Capture Interrupt Enable Control + * | | |0 = The flag CAPCMPF can trigger Input Capture interrupt Disabled. + * | | |1 = The flag CAPCMPF can trigger Input Capture interrupt Enabled. + * |[24] |CNTEN |Input Capture Counter Start Counting Control + * | | |Setting this bit to 1, the capture counter (ECAP_CNT) starts up-counting synchronously with the clock from the . + * | | |0 = ECAP_CNT stop counting. + * | | |1 = ECAP_CNT starts up-counting. + * |[25] |CMPCLREN |Input Capture Counter Cleared by Compare-match Control + * | | |If this bit is set to 1, the capture counter (ECAP_CNT) will be cleared to 0 when the compare-match event (CAPCMPF = 1) occurs. + * | | |0 = Compare-match event (CAPCMPF) can clear capture counter (ECAP_CNT) Disabled. + * | | |1 = Compare-match event (CAPCMPF) can clear capture counter (ECAP_CNT) Enabled. + * |[28] |CMPEN |Compare Function Enable Control + * | | |The compare function in input capture timer/counter is to compare the dynamic counting ECAP_CNT with the compare register ECAP_CNTCMP, if ECAP_CNT value reaches ECAP_CNTCMP, the flag CAPCMPF will be set. + * | | |0 = The compare function Disabled. + * | | |1 = The compare function Enabled. + * |[29] |CAPEN |Input Capture Timer/Counter Enable Control + * | | |0 = Input Capture function Disabled. + * | | |1 = Input Capture function Enabled. + * @var ECAP_T::CTL1 + * Offset: 0x18 Input Capture Control Register 1 + * --------------------------------------------------------------------------------------------------- + * |Bits |Field |Descriptions + * | :----: | :----: | :---- | + * |[1:0] |EDGESEL0 |Channel 0 Captured Edge Selection + * | | |Input capture0 can detect falling edge change only, rising edge change only or both edge change + * | | |00 = Detect rising edge only. + * | | |01 = Detect falling edge only. + * | | |1x = Detect both rising and falling edge. + * |[3:2] |EDGESEL1 |Channel 1 Captured Edge Selection + * | | |Input capture1 can detect falling edge change only, rising edge change only or both edge change + * | | |00 = Detect rising edge only. + * | | |01 = Detect falling edge only. + * | | |1x = Detect both rising and falling edge. + * |[5:4] |EDGESEL2 |Channel 2 Captured Edge Selection + * | | |Input capture2 can detect falling edge change only, rising edge change only or both edge changes + * | | |00 = Detect rising edge only. + * | | |01 = Detect falling edge only. + * | | |1x = Detect both rising and falling edge. + * |[8] |CAP0RLDEN |Capture Counteru2019s Reload Function Triggered by Event CAPTE0 Enable Bit + * | | |0 = The reload triggered by Event CAPTE0 Disabled. + * | | |1 = The reload triggered by Event CAPTE0 Enabled. + * |[9] |CAP1RLDEN |Capture Counteru2019s Reload Function Triggered by Event CAPTE1 Enable Bit + * | | |0 = The reload triggered by Event CAPTE1 Disabled. + * | | |1 = The reload triggered by Event CAPTE1 Enabled. + * |[10] |CAP2RLDEN |Capture Counteru2019s Reload Function Triggered by Event CAPTE2 Enable Bit + * | | |0 = The reload triggered by Event CAPTE2 Disabled. + * | | |1 = The reload triggered by Event CAPTE2 Enabled. + * |[11] |OVRLDEN |Capture Counteru2019s Reload Function Triggered by Overflow Enable Bit + * | | |0 = The reload triggered by CAPOV Disabled. + * | | |1 = The reload triggered by CAPOV Enabled. + * |[14:12] |CLKSEL |Capture Timer Clock Divide Selection + * | | |The capture timer clock has a pre-divider with eight divided options controlled by CLKSEL[2:0]. + * | | |000 = CAP_CLK/1. + * | | |001 = CAP_CLK/4. + * | | |010 = CAP_CLK/16. + * | | |011 = CAP_CLK/32. + * | | |100 = CAP_CLK/64. + * | | |101 = CAP_CLK/96. + * | | |110 = CAP_CLK/112. + * | | |111 = CAP_CLK/128. + * |[17:16] |CNTSRCSEL |Capture Timer/Counter Clock Source Selection + * | | |Select the capture timer/counter clock source. + * | | |00 = CAP_CLK (default). + * | | |01 = CAP0. + * | | |10 = CAP1. + * | | |11 = CAP2. + * |[20] |CAP0CLREN |Capture Counter Cleared by Capture Event0 Control + * | | |0 = Event CAPTE0 can clear capture counter (ECAP_CNT) Disabled. + * | | |1 = Event CAPTE0 can clear capture counter (ECAP_CNT) Enabled. + * |[21] |CAP1CLREN |Capture Counter Cleared by Capture Event1 Control + * | | |0 = Event CAPTE1 can clear capture counter (ECAP_CNT) Disabled. + * | | |1 = Event CAPTE1 can clear capture counter (ECAP_CNT) Enabled. + * |[22] |CAP2CLREN |Capture Counter Cleared by Capture Event2 Control + * | | |0 = Event CAPTE2 can clear capture counter (ECAP_CNT) Disabled. + * | | |1 = Event CAPTE2 can clear capture counter (ECAP_CNT) Enabled. + * @var ECAP_T::STATUS + * Offset: 0x1C Input Capture Status Register + * --------------------------------------------------------------------------------------------------- + * |Bits |Field |Descriptions + * | :----: | :----: | :---- | + * |[0] |CAPTF0 |Input Capture Channel 0 Triggered Flag + * | | |When the input capture channel 0 detects a valid edge change at CAP0 input, it will set flag CAPTF0 to high. + * | | |0 = No valid edge change has been detected at CAP0 input since last clear. + * | | |1 = At least a valid edge change has been detected at CAP0 input since last clear. + * | | |Note: This bit is only cleared by writing 1 to it. + * |[1] |CAPTF1 |Input Capture Channel 1 Triggered Flag + * | | |When the input capture channel 1 detects a valid edge change at CAP1 input, it will set flag CAPTF1 to high. + * | | |0 = No valid edge change has been detected at CAP1 input since last clear. + * | | |1 = At least a valid edge change has been detected at CAP1 input since last clear. + * | | |Note: This bit is only cleared by writing 1 to it. + * |[2] |CAPTF2 |Input Capture Channel 2 Triggered Flag + * | | |When the input capture channel 2 detects a valid edge change at CAP2 input, it will set flag CAPTF2 to high. + * | | |0 = No valid edge change has been detected at CAP2 input since last clear. + * | | |1 = At least a valid edge change has been detected at CAP2 input since last clear. + * | | |Note: This bit is only cleared by writing 1 to it. + * |[4] |CAPCMPF |Input Capture Compare-match Flag + * | | |If the input capture compare function is enabled, the flag is set by hardware when capture counter (ECAP_CNT) up counts and reaches the ECAP_CNTCMP value. + * | | |0 = ECAP_CNT has not matched ECAP_CNTCMP value since last clear. + * | | |1 = ECAP_CNT has matched ECAP_CNTCMP value at least once since last clear. + * | | |Note: This bit is only cleared by writing 1 to it. + * |[5] |CAPOVF |Input Capture Counter Overflow Flag + * | | |Flag is set by hardware when counter (ECAP_CNT) overflows from 0x00FF_FFFF to zero. + * | | |0 = No overflow event has occurred since last clear. + * | | |1 = Overflow event(s) has/have occurred since last clear. + * | | |Note: This bit is only cleared by writing 1 to it. + * |[6] |CAP0 |Value of Input Channel 0, CAP0 (Read Only) + * | | |Reflecting the value of input channel 0, CAP0 + * | | |(The bit is read only and write is ignored) + * |[7] |CAP1 |Value of Input Channel 1, CAP1 (Read Only) + * | | |Reflecting the value of input channel 1, CAP1 + * | | |(The bit is read only and write is ignored) + * |[8] |CAP2 |Value of Input Channel 2, CAP2 (Read Only) + * | | |Reflecting the value of input channel 2, CAP2. + * | | |(The bit is read only and write is ignored) + */ + __IO uint32_t CNT; /*!< [0x0000] Input Capture Counter */ + __IO uint32_t HLD0; /*!< [0x0004] Input Capture Hold Register 0 */ + __IO uint32_t HLD1; /*!< [0x0008] Input Capture Hold Register 1 */ + __IO uint32_t HLD2; /*!< [0x000c] Input Capture Hold Register 2 */ + __IO uint32_t CNTCMP; /*!< [0x0010] Input Capture Compare Register */ + __IO uint32_t CTL0; /*!< [0x0014] Input Capture Control Register 0 */ + __IO uint32_t CTL1; /*!< [0x0018] Input Capture Control Register 1 */ + __IO uint32_t STATUS; /*!< [0x001c] Input Capture Status Register */ + +} ECAP_T; + +/** + @addtogroup ECAP_CONST ECAP Bit Field Definition + Constant Definitions for ECAP Controller +@{ */ + +#define ECAP_CNT_CNT_Pos (0) /*!< ECAP_T::CNT: CNT Position */ +#define ECAP_CNT_CNT_Msk (0xfffffful << ECAP_CNT_CNT_Pos) /*!< ECAP_T::CNT: CNT Mask */ + +#define ECAP_HLD0_HOLD_Pos (0) /*!< ECAP_T::HLD0: HOLD Position */ +#define ECAP_HLD0_HOLD_Msk (0xfffffful << ECAP_HLD0_HOLD_Pos) /*!< ECAP_T::HLD0: HOLD Mask */ + +#define ECAP_HLD1_HOLD_Pos (0) /*!< ECAP_T::HLD1: HOLD Position */ +#define ECAP_HLD1_HOLD_Msk (0xfffffful << ECAP_HLD1_HOLD_Pos) /*!< ECAP_T::HLD1: HOLD Mask */ + +#define ECAP_HLD2_HOLD_Pos (0) /*!< ECAP_T::HLD2: HOLD Position */ +#define ECAP_HLD2_HOLD_Msk (0xfffffful << ECAP_HLD2_HOLD_Pos) /*!< ECAP_T::HLD2: HOLD Mask */ + +#define ECAP_CNTCMP_CNTCMP_Pos (0) /*!< ECAP_T::CNTCMP: CNTCMP Position */ +#define ECAP_CNTCMP_CNTCMP_Msk (0xfffffful << ECAP_CNTCMP_CNTCMP_Pos) /*!< ECAP_T::CNTCMP: CNTCMP Mask */ + +#define ECAP_CTL0_NFCLKSEL_Pos (0) /*!< ECAP_T::CTL0: NFCLKSEL Position */ +#define ECAP_CTL0_NFCLKSEL_Msk (0x7ul << ECAP_CTL0_NFCLKSEL_Pos) /*!< ECAP_T::CTL0: NFCLKSEL Mask */ + +#define ECAP_CTL0_CAPNFDIS_Pos (3) /*!< ECAP_T::CTL0: CAPNFDIS Position */ +#define ECAP_CTL0_CAPNFDIS_Msk (0x1ul << ECAP_CTL0_CAPNFDIS_Pos) /*!< ECAP_T::CTL0: CAPNFDIS Mask */ + +#define ECAP_CTL0_IC0EN_Pos (4) /*!< ECAP_T::CTL0: IC0EN Position */ +#define ECAP_CTL0_IC0EN_Msk (0x1ul << ECAP_CTL0_IC0EN_Pos) /*!< ECAP_T::CTL0: IC0EN Mask */ + +#define ECAP_CTL0_IC1EN_Pos (5) /*!< ECAP_T::CTL0: IC1EN Position */ +#define ECAP_CTL0_IC1EN_Msk (0x1ul << ECAP_CTL0_IC1EN_Pos) /*!< ECAP_T::CTL0: IC1EN Mask */ + +#define ECAP_CTL0_IC2EN_Pos (6) /*!< ECAP_T::CTL0: IC2EN Position */ +#define ECAP_CTL0_IC2EN_Msk (0x1ul << ECAP_CTL0_IC2EN_Pos) /*!< ECAP_T::CTL0: IC2EN Mask */ + +#define ECAP_CTL0_CAPSEL0_Pos (8) /*!< ECAP_T::CTL0: CAPSEL0 Position */ +#define ECAP_CTL0_CAPSEL0_Msk (0x3ul << ECAP_CTL0_CAPSEL0_Pos) /*!< ECAP_T::CTL0: CAPSEL0 Mask */ + +#define ECAP_CTL0_CAPSEL1_Pos (10) /*!< ECAP_T::CTL0: CAPSEL1 Position */ +#define ECAP_CTL0_CAPSEL1_Msk (0x3ul << ECAP_CTL0_CAPSEL1_Pos) /*!< ECAP_T::CTL0: CAPSEL1 Mask */ + +#define ECAP_CTL0_CAPSEL2_Pos (12) /*!< ECAP_T::CTL0: CAPSEL2 Position */ +#define ECAP_CTL0_CAPSEL2_Msk (0x3ul << ECAP_CTL0_CAPSEL2_Pos) /*!< ECAP_T::CTL0: CAPSEL2 Mask */ + +#define ECAP_CTL0_CAPIEN0_Pos (16) /*!< ECAP_T::CTL0: CAPIEN0 Position */ +#define ECAP_CTL0_CAPIEN0_Msk (0x1ul << ECAP_CTL0_CAPIEN0_Pos) /*!< ECAP_T::CTL0: CAPIEN0 Mask */ + +#define ECAP_CTL0_CAPIEN1_Pos (17) /*!< ECAP_T::CTL0: CAPIEN1 Position */ +#define ECAP_CTL0_CAPIEN1_Msk (0x1ul << ECAP_CTL0_CAPIEN1_Pos) /*!< ECAP_T::CTL0: CAPIEN1 Mask */ + +#define ECAP_CTL0_CAPIEN2_Pos (18) /*!< ECAP_T::CTL0: CAPIEN2 Position */ +#define ECAP_CTL0_CAPIEN2_Msk (0x1ul << ECAP_CTL0_CAPIEN2_Pos) /*!< ECAP_T::CTL0: CAPIEN2 Mask */ + +#define ECAP_CTL0_OVIEN_Pos (20) /*!< ECAP_T::CTL0: OVIEN Position */ +#define ECAP_CTL0_OVIEN_Msk (0x1ul << ECAP_CTL0_OVIEN_Pos) /*!< ECAP_T::CTL0: OVIEN Mask */ + +#define ECAP_CTL0_CMPIEN_Pos (21) /*!< ECAP_T::CTL0: CMPIEN Position */ +#define ECAP_CTL0_CMPIEN_Msk (0x1ul << ECAP_CTL0_CMPIEN_Pos) /*!< ECAP_T::CTL0: CMPIEN Mask */ + +#define ECAP_CTL0_CNTEN_Pos (24) /*!< ECAP_T::CTL0: CNTEN Position */ +#define ECAP_CTL0_CNTEN_Msk (0x1ul << ECAP_CTL0_CNTEN_Pos) /*!< ECAP_T::CTL0: CNTEN Mask */ + +#define ECAP_CTL0_CMPCLREN_Pos (25) /*!< ECAP_T::CTL0: CMPCLREN Position */ +#define ECAP_CTL0_CMPCLREN_Msk (0x1ul << ECAP_CTL0_CMPCLREN_Pos) /*!< ECAP_T::CTL0: CMPCLREN Mask */ + +#define ECAP_CTL0_CMPEN_Pos (28) /*!< ECAP_T::CTL0: CMPEN Position */ +#define ECAP_CTL0_CMPEN_Msk (0x1ul << ECAP_CTL0_CMPEN_Pos) /*!< ECAP_T::CTL0: CMPEN Mask */ + +#define ECAP_CTL0_CAPEN_Pos (29) /*!< ECAP_T::CTL0: CAPEN Position */ +#define ECAP_CTL0_CAPEN_Msk (0x1ul << ECAP_CTL0_CAPEN_Pos) /*!< ECAP_T::CTL0: CAPEN Mask */ + +#define ECAP_CTL1_EDGESEL0_Pos (0) /*!< ECAP_T::CTL1: EDGESEL0 Position */ +#define ECAP_CTL1_EDGESEL0_Msk (0x3ul << ECAP_CTL1_EDGESEL0_Pos) /*!< ECAP_T::CTL1: EDGESEL0 Mask */ + +#define ECAP_CTL1_EDGESEL1_Pos (2) /*!< ECAP_T::CTL1: EDGESEL1 Position */ +#define ECAP_CTL1_EDGESEL1_Msk (0x3ul << ECAP_CTL1_EDGESEL1_Pos) /*!< ECAP_T::CTL1: EDGESEL1 Mask */ + +#define ECAP_CTL1_EDGESEL2_Pos (4) /*!< ECAP_T::CTL1: EDGESEL2 Position */ +#define ECAP_CTL1_EDGESEL2_Msk (0x3ul << ECAP_CTL1_EDGESEL2_Pos) /*!< ECAP_T::CTL1: EDGESEL2 Mask */ + +#define ECAP_CTL1_CAP0RLDEN_Pos (8) /*!< ECAP_T::CTL1: CAP0RLDEN Position */ +#define ECAP_CTL1_CAP0RLDEN_Msk (0x1ul << ECAP_CTL1_CAP0RLDEN_Pos) /*!< ECAP_T::CTL1: CAP0RLDEN Mask */ + +#define ECAP_CTL1_CAP1RLDEN_Pos (9) /*!< ECAP_T::CTL1: CAP1RLDEN Position */ +#define ECAP_CTL1_CAP1RLDEN_Msk (0x1ul << ECAP_CTL1_CAP1RLDEN_Pos) /*!< ECAP_T::CTL1: CAP1RLDEN Mask */ + +#define ECAP_CTL1_CAP2RLDEN_Pos (10) /*!< ECAP_T::CTL1: CAP2RLDEN Position */ +#define ECAP_CTL1_CAP2RLDEN_Msk (0x1ul << ECAP_CTL1_CAP2RLDEN_Pos) /*!< ECAP_T::CTL1: CAP2RLDEN Mask */ + +#define ECAP_CTL1_OVRLDEN_Pos (11) /*!< ECAP_T::CTL1: OVRLDEN Position */ +#define ECAP_CTL1_OVRLDEN_Msk (0x1ul << ECAP_CTL1_OVRLDEN_Pos) /*!< ECAP_T::CTL1: OVRLDEN Mask */ + +#define ECAP_CTL1_CLKSEL_Pos (12) /*!< ECAP_T::CTL1: CLKSEL Position */ +#define ECAP_CTL1_CLKSEL_Msk (0x7ul << ECAP_CTL1_CLKSEL_Pos) /*!< ECAP_T::CTL1: CLKSEL Mask */ + +#define ECAP_CTL1_CNTSRCSEL_Pos (16) /*!< ECAP_T::CTL1: CNTSRCSEL Position */ +#define ECAP_CTL1_CNTSRCSEL_Msk (0x3ul << ECAP_CTL1_CNTSRCSEL_Pos) /*!< ECAP_T::CTL1: CNTSRCSEL Mask */ + +#define ECAP_CTL1_CAP0CLREN_Pos (20) /*!< ECAP_T::CTL1: CAP0CLREN Position */ +#define ECAP_CTL1_CAP0CLREN_Msk (0x1ul << ECAP_CTL1_CAP0CLREN_Pos) /*!< ECAP_T::CTL1: CAP0CLREN Mask */ + +#define ECAP_CTL1_CAP1CLREN_Pos (21) /*!< ECAP_T::CTL1: CAP1CLREN Position */ +#define ECAP_CTL1_CAP1CLREN_Msk (0x1ul << ECAP_CTL1_CAP1CLREN_Pos) /*!< ECAP_T::CTL1: CAP1CLREN Mask */ + +#define ECAP_CTL1_CAP2CLREN_Pos (22) /*!< ECAP_T::CTL1: CAP2CLREN Position */ +#define ECAP_CTL1_CAP2CLREN_Msk (0x1ul << ECAP_CTL1_CAP2CLREN_Pos) /*!< ECAP_T::CTL1: CAP2CLREN Mask */ + +#define ECAP_STATUS_CAPTF0_Pos (0) /*!< ECAP_T::STATUS: CAPTF0 Position */ +#define ECAP_STATUS_CAPTF0_Msk (0x1ul << ECAP_STATUS_CAPTF0_Pos) /*!< ECAP_T::STATUS: CAPTF0 Mask */ + +#define ECAP_STATUS_CAPTF1_Pos (1) /*!< ECAP_T::STATUS: CAPTF1 Position */ +#define ECAP_STATUS_CAPTF1_Msk (0x1ul << ECAP_STATUS_CAPTF1_Pos) /*!< ECAP_T::STATUS: CAPTF1 Mask */ + +#define ECAP_STATUS_CAPTF2_Pos (2) /*!< ECAP_T::STATUS: CAPTF2 Position */ +#define ECAP_STATUS_CAPTF2_Msk (0x1ul << ECAP_STATUS_CAPTF2_Pos) /*!< ECAP_T::STATUS: CAPTF2 Mask */ + +#define ECAP_STATUS_CAPCMPF_Pos (4) /*!< ECAP_T::STATUS: CAPCMPF Position */ +#define ECAP_STATUS_CAPCMPF_Msk (0x1ul << ECAP_STATUS_CAPCMPF_Pos) /*!< ECAP_T::STATUS: CAPCMPF Mask */ + +#define ECAP_STATUS_CAPOVF_Pos (5) /*!< ECAP_T::STATUS: CAPOVF Position */ +#define ECAP_STATUS_CAPOVF_Msk (0x1ul << ECAP_STATUS_CAPOVF_Pos) /*!< ECAP_T::STATUS: CAPOVF Mask */ + +#define ECAP_STATUS_CAP0_Pos (8) /*!< ECAP_T::STATUS: CAP0 Position */ +#define ECAP_STATUS_CAP0_Msk (0x1ul << ECAP_STATUS_CAP0_Pos) /*!< ECAP_T::STATUS: CAP0 Mask */ + +#define ECAP_STATUS_CAP1_Pos (9) /*!< ECAP_T::STATUS: CAP1 Position */ +#define ECAP_STATUS_CAP1_Msk (0x1ul << ECAP_STATUS_CAP1_Pos) /*!< ECAP_T::STATUS: CAP1 Mask */ + +#define ECAP_STATUS_CAP2_Pos (10) /*!< ECAP_T::STATUS: CAP2 Position */ +#define ECAP_STATUS_CAP2_Msk (0x1ul << ECAP_STATUS_CAP2_Pos) /*!< ECAP_T::STATUS: CAP2 Mask */ + +/**@}*/ /* ECAP_CONST */ +/**@}*/ /* end of ECAP register group */ + + +#endif /* __ECAP_REG_H__ */