![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
Diff: mbed-os/targets/TARGET_NUVOTON/TARGET_M2351/analogin_api.c
- Revision:
- 0:8fdf9a60065b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-os/targets/TARGET_NUVOTON/TARGET_M2351/analogin_api.c Wed Oct 10 00:33:53 2018 +0000 @@ -0,0 +1,115 @@ +/* mbed Microcontroller Library + * Copyright (c) 2017-2018 Nuvoton + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "analogin_api.h" + +#if DEVICE_ANALOGIN + +#include "cmsis.h" +#include "pinmap.h" +#include "PeripheralPins.h" +#include "nu_modutil.h" + +static uint32_t eadc_modinit_mask = 0; + +static const struct nu_modinit_s adc_modinit_tab[] = { + {ADC_0_0, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, EADC0_IRQn, NULL}, + {ADC_0_1, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, EADC0_IRQn, NULL}, + {ADC_0_2, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, EADC0_IRQn, NULL}, + {ADC_0_3, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, EADC0_IRQn, NULL}, + {ADC_0_4, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, EADC0_IRQn, NULL}, + {ADC_0_5, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, EADC0_IRQn, NULL}, + {ADC_0_6, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, EADC0_IRQn, NULL}, + {ADC_0_7, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, EADC0_IRQn, NULL}, + {ADC_0_8, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, EADC0_IRQn, NULL}, + {ADC_0_9, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, EADC0_IRQn, NULL}, + {ADC_0_10, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, EADC0_IRQn, NULL}, + {ADC_0_11, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, EADC0_IRQn, NULL}, + {ADC_0_12, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, EADC0_IRQn, NULL}, + {ADC_0_13, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, EADC0_IRQn, NULL}, + {ADC_0_14, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, EADC0_IRQn, NULL}, + {ADC_0_15, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, EADC0_IRQn, NULL}, +}; + +void analogin_init(analogin_t *obj, PinName pin) +{ + obj->adc = (ADCName) pinmap_peripheral(pin, PinMap_ADC); + MBED_ASSERT(obj->adc != (ADCName) NC); + + const struct nu_modinit_s *modinit = get_modinit(obj->adc, adc_modinit_tab); + MBED_ASSERT(modinit != NULL); + MBED_ASSERT(modinit->modname == (int) obj->adc); + + EADC_T *eadc_base = (EADC_T *) NU_MODBASE(obj->adc); + + // NOTE: All channels (identified by ADCName) share a ADC module. This reset will also affect other channels of the same ADC module. + if (! eadc_modinit_mask) { + /* Reset module + * + * NOTE: We must call secure version (from non-secure domain) because SYS/CLK regions are secure. + */ + SYS_ResetModule_S(modinit->rsetidx); + + /* Select IP clock source + * + * NOTE: We must call secure version (from non-secure domain) because SYS/CLK regions are secure. + */ + CLK_SetModuleClock_S(modinit->clkidx, modinit->clksrc, modinit->clkdiv); + + /* Enable IP clock + * + * NOTE: We must call secure version (from non-secure domain) because SYS/CLK regions are secure. + */ + CLK_EnableModuleClock_S(modinit->clkidx); + + // Set the ADC internal sampling time, input mode as single-end and enable the A/D converter + EADC_Open(eadc_base, EADC_CTL_DIFFEN_SINGLE_END); + } + + uint32_t chn = NU_MODSUBINDEX(obj->adc); + + // Wire pinout + pinmap_pinout(pin, PinMap_ADC); + + // Configure the sample module Nmod for analog input channel Nch and software trigger source + EADC_ConfigSampleModule(eadc_base, chn, EADC_SOFTWARE_TRIGGER, chn); + + eadc_modinit_mask |= 1 << chn; +} + +uint16_t analogin_read_u16(analogin_t *obj) +{ + EADC_T *eadc_base = (EADC_T *) NU_MODBASE(obj->adc); + uint32_t chn = NU_MODSUBINDEX(obj->adc); + + EADC_START_CONV(eadc_base, 1 << chn); + while (EADC_GET_DATA_VALID_FLAG(eadc_base, 1 << chn) != ((uint32_t) (1 << chn))); + uint16_t conv_res_12 = EADC_GET_CONV_DATA(eadc_base, chn); + // Just 12 bits are effective. Convert to 16 bits. + // conv_res_12: 0000 b11b10b9b8 b7b6b5b4 b3b2b1b0 + // conv_res_16: b11b10b9b8 b7b6b5b4 b3b2b1b0 b11b10b9b8 + uint16_t conv_res_16 = (conv_res_12 << 4) | (conv_res_12 >> 8); + + return conv_res_16; +} + +float analogin_read(analogin_t *obj) +{ + uint16_t value = analogin_read_u16(obj); + return (float) value * (1.0f / (float) 0xFFFF); +} + +#endif