![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
Diff: mbed-os/targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_KL43Z/drivers/fsl_flexio_i2c_master.h
- Revision:
- 0:8fdf9a60065b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-os/targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_KL43Z/drivers/fsl_flexio_i2c_master.h Wed Oct 10 00:33:53 2018 +0000 @@ -0,0 +1,490 @@ +/* + * Copyright (c) 2015, Freescale Semiconductor, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * o Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * o Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * o Neither the name of Freescale Semiconductor, Inc. nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _FSL_FLEXIO_I2C_MASTER_H_ +#define _FSL_FLEXIO_I2C_MASTER_H_ + +#include "fsl_common.h" +#include "fsl_flexio.h" + +/*! + * @addtogroup flexio_i2c_master + * @{ + */ + +/*! @file */ + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/*! @name Driver version */ +/*@{*/ +/*! @brief FlexIO I2C master driver version 2.1.0. */ +#define FSL_FLEXIO_I2C_MASTER_DRIVER_VERSION (MAKE_VERSION(2, 1, 0)) +/*@}*/ + +/*! @brief FlexIO I2C transfer status*/ +enum _flexio_i2c_status +{ + kStatus_FLEXIO_I2C_Busy = MAKE_STATUS(kStatusGroup_FLEXIO_I2C, 0), /*!< I2C is busy doing transfer. */ + kStatus_FLEXIO_I2C_Idle = MAKE_STATUS(kStatusGroup_FLEXIO_I2C, 1), /*!< I2C is busy doing transfer. */ + kStatus_FLEXIO_I2C_Nak = MAKE_STATUS(kStatusGroup_FLEXIO_I2C, 2), /*!< NAK received during transfer. */ +}; + +/*! @brief Define FlexIO I2C master interrupt mask. */ +enum _flexio_i2c_master_interrupt +{ + kFLEXIO_I2C_TxEmptyInterruptEnable = 0x1U, /*!< Tx buffer empty interrupt enable. */ + kFLEXIO_I2C_RxFullInterruptEnable = 0x2U, /*!< Rx buffer full interrupt enable. */ +}; + +/*! @brief Define FlexIO I2C master status mask. */ +enum _flexio_i2c_master_status_flags +{ + kFLEXIO_I2C_TxEmptyFlag = 0x1U, /*!< Tx shifter empty flag. */ + kFLEXIO_I2C_RxFullFlag = 0x2U, /*!< Rx shifter full/Transfer complete flag. */ + kFLEXIO_I2C_ReceiveNakFlag = 0x4U, /*!< Receive NAK flag. */ +}; + +/*! @brief Direction of master transfer.*/ +typedef enum _flexio_i2c_direction +{ + kFLEXIO_I2C_Write = 0x0U, /*!< Master send to slave. */ + kFLEXIO_I2C_Read = 0x1U, /*!< Master receive from slave. */ +} flexio_i2c_direction_t; + +/*! @brief Define FlexIO I2C master access structure typedef. */ +typedef struct _flexio_i2c_type +{ + FLEXIO_Type *flexioBase; /*!< FlexIO base pointer. */ + uint8_t SDAPinIndex; /*!< Pin select for I2C SDA. */ + uint8_t SCLPinIndex; /*!< Pin select for I2C SCL. */ + uint8_t shifterIndex[2]; /*!< Shifter index used in FlexIO I2C. */ + uint8_t timerIndex[2]; /*!< Timer index used in FlexIO I2C. */ +} FLEXIO_I2C_Type; + +/*! @brief Define FlexIO I2C master user configuration structure. */ +typedef struct _flexio_i2c_master_config +{ + bool enableMaster; /*!< Enables the FLEXIO I2C peripheral at initialization time. */ + bool enableInDoze; /*!< Enable/disable FlexIO operation in doze mode. */ + bool enableInDebug; /*!< Enable/disable FlexIO operation in debug mode. */ + bool enableFastAccess; /*!< Enable/disable fast access to FlexIO registers, fast access requires + the FlexIO clock to be at least twice the frequency of the bus clock. */ + uint32_t baudRate_Bps; /*!< Baud rate in Bps. */ +} flexio_i2c_master_config_t; + +/*! @brief Define FlexIO I2C master transfer structure. */ +typedef struct _flexio_i2c_master_transfer +{ + uint32_t flags; /*!< Transfer flag which controls the transfer, reserved for flexio i2c. */ + uint8_t slaveAddress; /*!< 7-bit slave address. */ + flexio_i2c_direction_t direction; /*!< Transfer direction, read or write. */ + uint32_t subaddress; /*!< Sub address. Transferred MSB first. */ + uint8_t subaddressSize; /*!< Size of command buffer. */ + uint8_t volatile *data; /*!< Transfer buffer. */ + volatile size_t dataSize; /*!< Transfer size. */ +} flexio_i2c_master_transfer_t; + +/*! @brief FlexIO I2C master handle typedef. */ +typedef struct _flexio_i2c_master_handle flexio_i2c_master_handle_t; + +/*! @brief FlexIO I2C master transfer callback typedef. */ +typedef void (*flexio_i2c_master_transfer_callback_t)(FLEXIO_I2C_Type *base, + flexio_i2c_master_handle_t *handle, + status_t status, + void *userData); + +/*! @brief Define FlexIO I2C master handle structure. */ +struct _flexio_i2c_master_handle +{ + flexio_i2c_master_transfer_t transfer; /*!< FlexIO I2C master transfer copy. */ + size_t transferSize; /*!< Total bytes to be transferred. */ + uint8_t state; /*!< Transfer state maintained during transfer. */ + flexio_i2c_master_transfer_callback_t completionCallback; /*!< Callback function called at transfer event. */ + /*!< Callback function called at transfer event. */ + void *userData; /*!< Callback parameter passed to callback function. */ +}; + +/******************************************************************************* + * API + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /*_cplusplus*/ + +/*! + * @name Initialization and deinitialization + * @{ + */ + +/*! + * @brief Ungates the FlexIO clock, resets the FlexIO module, and configures the FlexIO I2C + * hardware configuration. + * + * Example + @code + FLEXIO_I2C_Type base = { + .flexioBase = FLEXIO, + .SDAPinIndex = 0, + .SCLPinIndex = 1, + .shifterIndex = {0,1}, + .timerIndex = {0,1} + }; + flexio_i2c_master_config_t config = { + .enableInDoze = false, + .enableInDebug = true, + .enableFastAccess = false, + .baudRate_Bps = 100000 + }; + FLEXIO_I2C_MasterInit(base, &config, srcClock_Hz); + @endcode + * + * @param base pointer to FLEXIO_I2C_Type structure. + * @param masterConfig pointer to flexio_i2c_master_config_t structure. + * @param srcClock_Hz FlexIO source clock in Hz. +*/ +void FLEXIO_I2C_MasterInit(FLEXIO_I2C_Type *base, flexio_i2c_master_config_t *masterConfig, uint32_t srcClock_Hz); + +/*! + * @brief De-initializes the FlexIO I2C master peripheral. Calling this API gates the FlexIO clock, + * so the FlexIO I2C master module can't work unless call FLEXIO_I2C_MasterInit. + * + * @param base pointer to FLEXIO_I2C_Type structure. + */ +void FLEXIO_I2C_MasterDeinit(FLEXIO_I2C_Type *base); + +/*! + * @brief Gets the default configuration to configure the FlexIO module. The configuration + * can be used directly for calling FLEXIO_I2C_MasterInit(). + * + * Example: + @code + flexio_i2c_master_config_t config; + FLEXIO_I2C_MasterGetDefaultConfig(&config); + @endcode + * @param masterConfig pointer to flexio_i2c_master_config_t structure. +*/ +void FLEXIO_I2C_MasterGetDefaultConfig(flexio_i2c_master_config_t *masterConfig); + +/*! + * @brief Enables/disables the FlexIO module operation. + * + * @param base pointer to FLEXIO_I2C_Type structure. + * @param enable pass true to enable module, false to disable module. +*/ +static inline void FLEXIO_I2C_MasterEnable(FLEXIO_I2C_Type *base, bool enable) +{ + if (enable) + { + base->flexioBase->CTRL |= FLEXIO_CTRL_FLEXEN_MASK; + } + else + { + base->flexioBase->CTRL &= ~FLEXIO_CTRL_FLEXEN_MASK; + } +} + +/* @} */ + +/*! + * @name Status + * @{ + */ + +/*! + * @brief Gets the FlexIO I2C master status flags. + * + * @param base pointer to FLEXIO_I2C_Type structure + * @return status flag, use status flag to AND #_flexio_i2c_master_status_flags could get the related status. +*/ + +uint32_t FLEXIO_I2C_MasterGetStatusFlags(FLEXIO_I2C_Type *base); + +/*! + * @brief Clears the FlexIO I2C master status flags. + * + * @param base pointer to FLEXIO_I2C_Type structure. + * @param mask status flag. + * The parameter could be any combination of the following values: + * @arg kFLEXIO_I2C_RxFullFlag + * @arg kFLEXIO_I2C_ReceiveNakFlag +*/ + +void FLEXIO_I2C_MasterClearStatusFlags(FLEXIO_I2C_Type *base, uint32_t mask); + +/*@}*/ + +/*! + * @name Interrupts + * @{ + */ + +/*! + * @brief Enables the FlexIO i2c master interrupt requests. + * + * @param base pointer to FLEXIO_I2C_Type structure. + * @param mask interrupt source. + * Currently only one interrupt request source: + * @arg kFLEXIO_I2C_TransferCompleteInterruptEnable + */ +void FLEXIO_I2C_MasterEnableInterrupts(FLEXIO_I2C_Type *base, uint32_t mask); + +/*! + * @brief Disables the FlexIO I2C master interrupt requests. + * + * @param base pointer to FLEXIO_I2C_Type structure. + * @param mask interrupt source. + */ +void FLEXIO_I2C_MasterDisableInterrupts(FLEXIO_I2C_Type *base, uint32_t mask); + +/*@}*/ + +/*! + * @name Bus Operations + * @{ + */ + +/*! + * @brief Sets the FlexIO I2C master transfer baudrate. + * + * @param base pointer to FLEXIO_I2C_Type structure + * @param baudRate_Bps the baud rate value in HZ + * @param srcClock_Hz source clock in HZ + */ +void FLEXIO_I2C_MasterSetBaudRate(FLEXIO_I2C_Type *base, uint32_t baudRate_Bps, uint32_t srcClock_Hz); + +/*! + * @brief Sends START + 7-bit address to the bus. + * + * @note This is API should be called when transfer configuration is ready to send a START signal + * and 7-bit address to the bus. This is a non-blocking API, which returns directly after the address + * is put into the data register but not address transfer finished on the bus. Ensure that + * the kFLEXIO_I2C_RxFullFlag status is asserted before calling this API. + * @param base pointer to FLEXIO_I2C_Type structure. + * @param address 7-bit address. + * @param direction transfer direction. + * This parameter is one of the values in flexio_i2c_direction_t: + * @arg kFLEXIO_I2C_Write: Transmit + * @arg kFLEXIO_I2C_Read: Receive + */ + +void FLEXIO_I2C_MasterStart(FLEXIO_I2C_Type *base, uint8_t address, flexio_i2c_direction_t direction); + +/*! + * @brief Sends the stop signal on the bus. + * + * @param base pointer to FLEXIO_I2C_Type structure. + */ +void FLEXIO_I2C_MasterStop(FLEXIO_I2C_Type *base); + +/*! + * @brief Sends the repeated start signal on the bus. + * + * @param base pointer to FLEXIO_I2C_Type structure. + */ +void FLEXIO_I2C_MasterRepeatedStart(FLEXIO_I2C_Type *base); + +/*! + * @brief Sends the stop signal when transfer is still on-going. + * + * @param base pointer to FLEXIO_I2C_Type structure. + */ +void FLEXIO_I2C_MasterAbortStop(FLEXIO_I2C_Type *base); + +/*! + * @brief Configures the sent ACK/NAK for the following byte. + * + * @param base pointer to FLEXIO_I2C_Type structure. + * @param enable true to configure send ACK, false configure to send NAK. + */ +void FLEXIO_I2C_MasterEnableAck(FLEXIO_I2C_Type *base, bool enable); + +/*! + * @brief Sets the number of bytes to be transferred from a start signal to a stop signal. + * + * @note Call this API before a transfer begins because the timer generates a number of clocks according + * to the number of bytes that need to be transferred. + * + * @param base pointer to FLEXIO_I2C_Type structure. + * @param count number of bytes need to be transferred from a start signal to a re-start/stop signal + * @retval kStatus_Success Successfully configured the count. + * @retval kStatus_InvalidArgument Input argument is invalid. +*/ +status_t FLEXIO_I2C_MasterSetTransferCount(FLEXIO_I2C_Type *base, uint8_t count); + +/*! + * @brief Writes one byte of data to the I2C bus. + * + * @note This is a non-blocking API, which returns directly after the data is put into the + * data register but not data transfer finished on the bus. Ensure that + * the TxEmptyFlag is asserted before calling this API. + * + * @param base pointer to FLEXIO_I2C_Type structure. + * @param data a byte of data. + */ +static inline void FLEXIO_I2C_MasterWriteByte(FLEXIO_I2C_Type *base, uint32_t data) +{ + base->flexioBase->SHIFTBUFBBS[base->shifterIndex[0]] = data; +} + +/*! + * @brief Reads one byte of data from the I2C bus. + * + * @note This is a non-blocking API, which returns directly after the data is read from the + * data register. Ensure that the data is ready in the register. + * + * @param base pointer to FLEXIO_I2C_Type structure. + * @return data byte read. + */ +static inline uint8_t FLEXIO_I2C_MasterReadByte(FLEXIO_I2C_Type *base) +{ + return base->flexioBase->SHIFTBUFBIS[base->shifterIndex[1]]; +} + +/*! + * @brief Sends a buffer of data in bytes. + * + * @note This function blocks via polling until all bytes have been sent. + * + * @param base pointer to FLEXIO_I2C_Type structure. + * @param txBuff The data bytes to send. + * @param txSize The number of data bytes to send. + * @retval kStatus_Success Successfully write data. + * @retval kStatus_FLEXIO_I2C_Nak Receive NAK during writing data. + */ +status_t FLEXIO_I2C_MasterWriteBlocking(FLEXIO_I2C_Type *base, const uint8_t *txBuff, uint8_t txSize); + +/*! + * @brief Receives a buffer of bytes. + * + * @note This function blocks via polling until all bytes have been received. + * + * @param base pointer to FLEXIO_I2C_Type structure. + * @param rxBuff The buffer to store the received bytes. + * @param rxSize The number of data bytes to be received. + */ +void FLEXIO_I2C_MasterReadBlocking(FLEXIO_I2C_Type *base, uint8_t *rxBuff, uint8_t rxSize); + +/*! + * @brief Performs a master polling transfer on the I2C bus. + * + * @note The API does not return until the transfer succeeds or fails due + * to receiving NAK. + * + * @param base pointer to FLEXIO_I2C_Type structure. + * @param handle pointer to flexio_i2c_master_handle_t structure which stores the transfer state. + * @param xfer pointer to flexio_i2c_master_transfer_t structure. + * @return status of status_t. + */ +status_t FLEXIO_I2C_MasterTransferBlocking(FLEXIO_I2C_Type *base, + flexio_i2c_master_handle_t *handle, + flexio_i2c_master_transfer_t *xfer); +/*@}*/ + +/*Transactional APIs*/ + +/*! + * @name Transactional + * @{ + */ + +/*! + * @brief Initializes the I2C handle which is used in transactional functions. + * + * @param base pointer to FLEXIO_I2C_Type structure. + * @param handle pointer to flexio_i2c_master_handle_t structure to store the transfer state. + * @param callback pointer to user callback function. + * @param userData user param passed to the callback function. + * @retval kStatus_Success Successfully create the handle. + * @retval kStatus_OutOfRange The FlexIO type/handle/isr table out of range. + */ +status_t FLEXIO_I2C_MasterTransferCreateHandle(FLEXIO_I2C_Type *base, + flexio_i2c_master_handle_t *handle, + flexio_i2c_master_transfer_callback_t callback, + void *userData); + +/*! + * @brief Performs a master interrupt non-blocking transfer on the I2C bus. + * + * @note The API returns immediately after the transfer initiates. + * Call FLEXIO_I2C_MasterGetTransferCount to poll the transfer status to check whether + * the transfer is finished. If the return status is not kStatus_FLEXIO_I2C_Busy, the transfer + * is finished. + * + * @param base pointer to FLEXIO_I2C_Type structure + * @param handle pointer to flexio_i2c_master_handle_t structure which stores the transfer state + * @param xfer pointer to flexio_i2c_master_transfer_t structure + * @retval kStatus_Success Successfully start a transfer. + * @retval kStatus_FLEXIO_I2C_Busy FLEXIO I2C is not idle, is running another transfer. + */ +status_t FLEXIO_I2C_MasterTransferNonBlocking(FLEXIO_I2C_Type *base, + flexio_i2c_master_handle_t *handle, + flexio_i2c_master_transfer_t *xfer); + +/*! + * @brief Gets the master transfer status during a interrupt non-blocking transfer. + * + * @param base pointer to FLEXIO_I2C_Type structure. + * @param handle pointer to flexio_i2c_master_handle_t structure which stores the transfer state. + * @param count Number of bytes transferred so far by the non-blocking transaction. + * @retval kStatus_InvalidArgument count is Invalid. + * @retval kStatus_Success Successfully return the count. + */ +status_t FLEXIO_I2C_MasterTransferGetCount(FLEXIO_I2C_Type *base, flexio_i2c_master_handle_t *handle, size_t *count); + +/*! + * @brief Aborts an interrupt non-blocking transfer early. + * + * @note This API can be called at any time when an interrupt non-blocking transfer initiates + * to abort the transfer early. + * + * @param base pointer to FLEXIO_I2C_Type structure + * @param handle pointer to flexio_i2c_master_handle_t structure which stores the transfer state + */ +void FLEXIO_I2C_MasterTransferAbort(FLEXIO_I2C_Type *base, flexio_i2c_master_handle_t *handle); + +/*! + * @brief Master interrupt handler. + * + * @param i2cType pointer to FLEXIO_I2C_Type structure + * @param i2cHandle pointer to flexio_i2c_master_transfer_t structure + */ +void FLEXIO_I2C_MasterTransferHandleIRQ(void *i2cType, void *i2cHandle); + +/*@}*/ + +#if defined(__cplusplus) +} +#endif /*_cplusplus*/ +/*@}*/ + +#endif /*_FSL_FLEXIO_I2C_MASTER_H_*/