Diff: mbed-os/targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_K82F/drivers/fsl_trng.c

Revision:

0:8fdf9a60065b

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os/targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_K82F/drivers/fsl_trng.c	Wed Oct 10 00:33:53 2018 +0000
@@ -0,0 +1,1622 @@
+/*
+ * Copyright (c) 2015, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "fsl_trng.h"
+
+#if defined(FSL_FEATURE_SOC_TRNG_COUNT) && FSL_FEATURE_SOC_TRNG_COUNT
+
+/*******************************************************************************
+ * Definitions
+ *******************************************************************************/
+/* Default values for user configuration structure.*/
+#if (defined(KW40Z4_SERIES) || defined(KW41Z4_SERIES) || defined(KW31Z4_SERIES) || defined(KW21Z4_SERIES))
+#define TRNG_USER_CONFIG_DEFAULT_OSC_DIV kTRNG_RingOscDiv8
+#elif(defined(KV56F24_SERIES) || defined(KV58F24_SERIES) || defined(KL28Z7_SERIES) || defined(KL81Z7_SERIES) || \
+      defined(KL82Z7_SERIES))
+#define TRNG_USER_CONFIG_DEFAULT_OSC_DIV kTRNG_RingOscDiv4
+#elif defined(K81F25615_SERIES)
+#define TRNG_USER_CONFIG_DEFAULT_OSC_DIV kTRNG_RingOscDiv2
+#else
+#define TRNG_USER_CONFIG_DEFAULT_OSC_DIV kTRNG_RingOscDiv0
+#endif
+
+#define TRNG_USER_CONFIG_DEFAULT_LOCK 0
+#define TRNG_USER_CONFIG_DEFAULT_ENTROPY_DELAY 3200
+#define TRNG_USER_CONFIG_DEFAULT_SAMPLE_SIZE 2500
+#define TRNG_USER_CONFIG_DEFAULT_SPARSE_BIT_LIMIT 63
+#define TRNG_USER_CONFIG_DEFAULT_RETRY_COUNT 1
+#define TRNG_USER_CONFIG_DEFAULT_RUN_MAX_LIMIT 34
+
+#define TRNG_USER_CONFIG_DEFAULT_MONOBIT_MAXIMUM 1384
+#define TRNG_USER_CONFIG_DEFAULT_MONOBIT_MINIMUM (TRNG_USER_CONFIG_DEFAULT_MONOBIT_MAXIMUM - 268)
+#define TRNG_USER_CONFIG_DEFAULT_RUNBIT1_MAXIMUM 405
+#define TRNG_USER_CONFIG_DEFAULT_RUNBIT1_MINIMUM (TRNG_USER_CONFIG_DEFAULT_RUNBIT1_MAXIMUM - 178)
+#define TRNG_USER_CONFIG_DEFAULT_RUNBIT2_MAXIMUM 220
+#define TRNG_USER_CONFIG_DEFAULT_RUNBIT2_MINIMUM (TRNG_USER_CONFIG_DEFAULT_RUNBIT2_MAXIMUM - 122)
+#define TRNG_USER_CONFIG_DEFAULT_RUNBIT3_MAXIMUM 125
+#define TRNG_USER_CONFIG_DEFAULT_RUNBIT3_MINIMUM (TRNG_USER_CONFIG_DEFAULT_RUNBIT3_MAXIMUM - 88)
+#define TRNG_USER_CONFIG_DEFAULT_RUNBIT4_MAXIMUM 75
+#define TRNG_USER_CONFIG_DEFAULT_RUNBIT4_MINIMUM (TRNG_USER_CONFIG_DEFAULT_RUNBIT4_MAXIMUM - 64)
+#define TRNG_USER_CONFIG_DEFAULT_RUNBIT5_MAXIMUM 47
+#define TRNG_USER_CONFIG_DEFAULT_RUNBIT5_MINIMUM (TRNG_USER_CONFIG_DEFAULT_RUNBIT5_MAXIMUM - 46)
+#define TRNG_USER_CONFIG_DEFAULT_RUNBIT6PLUS_MAXIMUM 47
+#define TRNG_USER_CONFIG_DEFAULT_RUNBIT6PLUS_MINIMUM (TRNG_USER_CONFIG_DEFAULT_RUNBIT6PLUS_MAXIMUM - 46)
+#define TRNG_USER_CONFIG_DEFAULT_POKER_MAXIMUM 26912
+#define TRNG_USER_CONFIG_DEFAULT_POKER_MINIMUM (TRNG_USER_CONFIG_DEFAULT_POKER_MAXIMUM - 2467)
+#define TRNG_USER_CONFIG_DEFAULT_FREQUENCY_MAXIMUM 25600
+#define TRNG_USER_CONFIG_DEFAULT_FREQUENCY_MINIMUM 1600
+
+/*! @brief TRNG work mode */
+typedef enum _trng_work_mode
+{
+    kTRNG_WorkModeRun = 0U,    /*!< Run Mode. */
+    kTRNG_WorkModeProgram = 1U /*!< Program Mode. */
+} trng_work_mode_t;
+
+/*! @brief TRNG statistical check type*/
+typedef enum _trng_statistical_check
+{
+    kTRNG_StatisticalCheckMonobit =
+        1U,                        /*!< Statistical check of number of ones/zero detected during entropy generation. */
+    kTRNG_StatisticalCheckRunBit1, /*!< Statistical check of number of runs of length 1 detected during entropy
+                                      generation. */
+    kTRNG_StatisticalCheckRunBit2, /*!< Statistical check of number of runs of length 2 detected during entropy
+                                      generation. */
+    kTRNG_StatisticalCheckRunBit3, /*!< Statistical check of number of runs of length 3 detected during entropy
+                                      generation. */
+    kTRNG_StatisticalCheckRunBit4, /*!< Statistical check of number of runs of length 4 detected during entropy
+                                      generation. */
+    kTRNG_StatisticalCheckRunBit5, /*!< Statistical check of number of runs of length 5 detected during entropy
+                                      generation. */
+    kTRNG_StatisticalCheckRunBit6Plus,   /*!< Statistical check of number of runs of length 6 or more detected during
+                                            entropy generation. */
+    kTRNG_StatisticalCheckPoker,         /*!< Statistical check of "Poker Test". */
+    kTRNG_StatisticalCheckFrequencyCount /*!< Statistical check of entropy sample frequency count. */
+} trng_statistical_check_t;
+
+/*******************************************************************************
+ * TRNG_SCMISC - RNG Statistical Check Miscellaneous Register
+ ******************************************************************************/
+/*!
+ * @name Register TRNG_SCMISC, field RTY_CT[19:16] (RW)
+ *
+ * RETRY COUNT. If a statistical check fails during the TRNG Entropy Generation,
+ * the RTY_CT value indicates the number of times a retry should occur before
+ * generating an error. This field is writable only if MCTL[PRGM] bit is 1. This
+ * field will read zeroes if MCTL[PRGM] = 0. This field is cleared to 1h by writing
+ * the MCTL[RST_DEF] bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SCMISC_RTY_CT field. */
+#define TRNG_RD_SCMISC_RTY_CT(base) ((TRNG_SCMISC_REG(base) & TRNG_SCMISC_RTY_CT_MASK) >> TRNG_SCMISC_RTY_CT_SHIFT)
+
+/*! @brief Set the RTY_CT field to a new value. */
+#define TRNG_WR_SCMISC_RTY_CT(base, value) (TRNG_RMW_SCMISC(base, TRNG_SCMISC_RTY_CT_MASK, TRNG_SCMISC_RTY_CT(value)))
+/*@}*/
+
+/*******************************************************************************
+ * TRNG_SCML - RNG Statistical Check Monobit Limit Register
+ ******************************************************************************/
+/*!
+ * @brief TRNG_SCML - RNG Statistical Check Monobit Limit Register (RW)
+ *
+ * Reset value: 0x010C0568U
+ *
+ * The RNG Statistical Check Monobit Limit Register defines the allowable
+ * maximum and minimum number of ones/zero detected during entropy generation. To pass
+ * the test, the number of ones/zeroes generated must be less than the programmed
+ * maximum value, and the number of ones/zeroes generated must be greater than
+ * (maximum - range). If this test fails, the Retry Counter in SCMISC will be
+ * decremented, and a retry will occur if the Retry Count has not reached zero. If
+ * the Retry Count has reached zero, an error will be generated. Note that this
+ * offset (0xBASE_0620) is used as SCML only if MCTL[PRGM] is 1. If MCTL[PRGM] is 0,
+ * this offset is used as SCMC readback register.
+ */
+/*!
+ * @name Constants and macros for entire TRNG_SCML register
+ */
+/*@{*/
+#define TRNG_SCML_REG(base) ((base)->SCML)
+#define TRNG_RD_SCML(base) (TRNG_SCML_REG(base))
+#define TRNG_WR_SCML(base, value) (TRNG_SCML_REG(base) = (value))
+#define TRNG_RMW_SCML(base, mask, value) (TRNG_WR_SCML(base, (TRNG_RD_SCML(base) & ~(mask)) | (value)))
+/*@}*/
+/*!
+ * @name Register TRNG_SCML, field MONO_MAX[15:0] (RW)
+ *
+ * Monobit Maximum Limit. Defines the maximum allowable count taken during
+ * entropy generation. The number of ones/zeroes detected during entropy generation
+ * must be less than MONO_MAX, else a retry or error will occur. This register is
+ * cleared to 00056Bh (decimal 1387) by writing the MCTL[RST_DEF] bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SCML_MONO_MAX field. */
+#define TRNG_RD_SCML_MONO_MAX(base) ((TRNG_SCML_REG(base) & TRNG_SCML_MONO_MAX_MASK) >> TRNG_SCML_MONO_MAX_SHIFT)
+
+/*! @brief Set the MONO_MAX field to a new value. */
+#define TRNG_WR_SCML_MONO_MAX(base, value) (TRNG_RMW_SCML(base, TRNG_SCML_MONO_MAX_MASK, TRNG_SCML_MONO_MAX(value)))
+/*@}*/
+/*!
+ * @name Register TRNG_SCML, field MONO_RNG[31:16] (RW)
+ *
+ * Monobit Range. The number of ones/zeroes detected during entropy generation
+ * must be greater than MONO_MAX - MONO_RNG, else a retry or error will occur.
+ * This register is cleared to 000112h (decimal 274) by writing the MCTL[RST_DEF]
+ * bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SCML_MONO_RNG field. */
+#define TRNG_RD_SCML_MONO_RNG(base) ((TRNG_SCML_REG(base) & TRNG_SCML_MONO_RNG_MASK) >> TRNG_SCML_MONO_RNG_SHIFT)
+
+/*! @brief Set the MONO_RNG field to a new value. */
+#define TRNG_WR_SCML_MONO_RNG(base, value) (TRNG_RMW_SCML(base, TRNG_SCML_MONO_RNG_MASK, TRNG_SCML_MONO_RNG(value)))
+/*@}*/
+
+/*******************************************************************************
+ * TRNG_SCR1L - RNG Statistical Check Run Length 1 Limit Register
+ ******************************************************************************/
+
+/*!
+ * @brief TRNG_SCR1L - RNG Statistical Check Run Length 1 Limit Register (RW)
+ *
+ * Reset value: 0x00B20195U
+ *
+ * The RNG Statistical Check Run Length 1 Limit Register defines the allowable
+ * maximum and minimum number of runs of length 1 detected during entropy
+ * generation. To pass the test, the number of runs of length 1 (for samples of both 0
+ * and 1) must be less than the programmed maximum value, and the number of runs of
+ * length 1 must be greater than (maximum - range). If this test fails, the
+ * Retry Counter in SCMISC will be decremented, and a retry will occur if the Retry
+ * Count has not reached zero. If the Retry Count has reached zero, an error will
+ * be generated. Note that this address (0xBASE_0624) is used as SCR1L only if
+ * MCTL[PRGM] is 1. If MCTL[PRGM] is 0, this address is used as SCR1C readback
+ * register.
+ */
+/*!
+ * @name Constants and macros for entire TRNG_SCR1L register
+ */
+/*@{*/
+#define TRNG_SCR1L_REG(base) ((base)->SCR1L)
+#define TRNG_RD_SCR1L(base) (TRNG_SCR1L_REG(base))
+#define TRNG_WR_SCR1L(base, value) (TRNG_SCR1L_REG(base) = (value))
+#define TRNG_RMW_SCR1L(base, mask, value) (TRNG_WR_SCR1L(base, (TRNG_RD_SCR1L(base) & ~(mask)) | (value)))
+/*@}*/
+
+/*!
+ * @name Register TRNG_SCR1L, field RUN1_MAX[14:0] (RW)
+ *
+ * Run Length 1 Maximum Limit. Defines the maximum allowable runs of length 1
+ * (for both 0 and 1) detected during entropy generation. The number of runs of
+ * length 1 detected during entropy generation must be less than RUN1_MAX, else a
+ * retry or error will occur. This register is cleared to 01E5h (decimal 485) by
+ * writing the MCTL[RST_DEF] bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SCR1L_RUN1_MAX field. */
+#define TRNG_RD_SCR1L_RUN1_MAX(base) ((TRNG_SCR1L_REG(base) & TRNG_SCR1L_RUN1_MAX_MASK) >> TRNG_SCR1L_RUN1_MAX_SHIFT)
+
+/*! @brief Set the RUN1_MAX field to a new value. */
+#define TRNG_WR_SCR1L_RUN1_MAX(base, value) (TRNG_RMW_SCR1L(base, TRNG_SCR1L_RUN1_MAX_MASK, TRNG_SCR1L_RUN1_MAX(value)))
+/*@}*/
+
+/*!
+ * @name Register TRNG_SCR1L, field RUN1_RNG[30:16] (RW)
+ *
+ * Run Length 1 Range. The number of runs of length 1 (for both 0 and 1)
+ * detected during entropy generation must be greater than RUN1_MAX - RUN1_RNG, else a
+ * retry or error will occur. This register is cleared to 0102h (decimal 258) by
+ * writing the MCTL[RST_DEF] bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SCR1L_RUN1_RNG field. */
+#define TRNG_RD_SCR1L_RUN1_RNG(base) ((TRNG_SCR1L_REG(base) & TRNG_SCR1L_RUN1_RNG_MASK) >> TRNG_SCR1L_RUN1_RNG_SHIFT)
+
+/*! @brief Set the RUN1_RNG field to a new value. */
+#define TRNG_WR_SCR1L_RUN1_RNG(base, value) (TRNG_RMW_SCR1L(base, TRNG_SCR1L_RUN1_RNG_MASK, TRNG_SCR1L_RUN1_RNG(value)))
+/*@}*/
+
+/*******************************************************************************
+ * TRNG_SCR2L - RNG Statistical Check Run Length 2 Limit Register
+ ******************************************************************************/
+
+/*!
+ * @brief TRNG_SCR2L - RNG Statistical Check Run Length 2 Limit Register (RW)
+ *
+ * Reset value: 0x007A00DCU
+ *
+ * The RNG Statistical Check Run Length 2 Limit Register defines the allowable
+ * maximum and minimum number of runs of length 2 detected during entropy
+ * generation. To pass the test, the number of runs of length 2 (for samples of both 0
+ * and 1) must be less than the programmed maximum value, and the number of runs of
+ * length 2 must be greater than (maximum - range). If this test fails, the
+ * Retry Counter in SCMISC will be decremented, and a retry will occur if the Retry
+ * Count has not reached zero. If the Retry Count has reached zero, an error will
+ * be generated. Note that this address (0xBASE_0628) is used as SCR2L only if
+ * MCTL[PRGM] is 1. If MCTL[PRGM] is 0, this address is used as SCR2C readback
+ * register.
+ */
+/*!
+ * @name Constants and macros for entire TRNG_SCR2L register
+ */
+/*@{*/
+#define TRNG_SCR2L_REG(base) ((base)->SCR2L)
+#define TRNG_RD_SCR2L(base) (TRNG_SCR2L_REG(base))
+#define TRNG_WR_SCR2L(base, value) (TRNG_SCR2L_REG(base) = (value))
+#define TRNG_RMW_SCR2L(base, mask, value) (TRNG_WR_SCR2L(base, (TRNG_RD_SCR2L(base) & ~(mask)) | (value)))
+/*@}*/
+
+/*
+ * Constants & macros for individual TRNG_SCR2L bitfields
+ */
+
+/*!
+ * @name Register TRNG_SCR2L, field RUN2_MAX[13:0] (RW)
+ *
+ * Run Length 2 Maximum Limit. Defines the maximum allowable runs of length 2
+ * (for both 0 and 1) detected during entropy generation. The number of runs of
+ * length 2 detected during entropy generation must be less than RUN2_MAX, else a
+ * retry or error will occur. This register is cleared to 00DCh (decimal 220) by
+ * writing the MCTL[RST_DEF] bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SCR2L_RUN2_MAX field. */
+#define TRNG_RD_SCR2L_RUN2_MAX(base) ((TRNG_SCR2L_REG(base) & TRNG_SCR2L_RUN2_MAX_MASK) >> TRNG_SCR2L_RUN2_MAX_SHIFT)
+
+/*! @brief Set the RUN2_MAX field to a new value. */
+#define TRNG_WR_SCR2L_RUN2_MAX(base, value) (TRNG_RMW_SCR2L(base, TRNG_SCR2L_RUN2_MAX_MASK, TRNG_SCR2L_RUN2_MAX(value)))
+/*@}*/
+
+/*!
+ * @name Register TRNG_SCR2L, field RUN2_RNG[29:16] (RW)
+ *
+ * Run Length 2 Range. The number of runs of length 2 (for both 0 and 1)
+ * detected during entropy generation must be greater than RUN2_MAX - RUN2_RNG, else a
+ * retry or error will occur. This register is cleared to 007Ah (decimal 122) by
+ * writing the MCTL[RST_DEF] bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SCR2L_RUN2_RNG field. */
+#define TRNG_RD_SCR2L_RUN2_RNG(base) ((TRNG_SCR2L_REG(base) & TRNG_SCR2L_RUN2_RNG_MASK) >> TRNG_SCR2L_RUN2_RNG_SHIFT)
+
+/*! @brief Set the RUN2_RNG field to a new value. */
+#define TRNG_WR_SCR2L_RUN2_RNG(base, value) (TRNG_RMW_SCR2L(base, TRNG_SCR2L_RUN2_RNG_MASK, TRNG_SCR2L_RUN2_RNG(value)))
+/*@}*/
+
+/*******************************************************************************
+ * TRNG_SCR3L - RNG Statistical Check Run Length 3 Limit Register
+ ******************************************************************************/
+
+/*!
+ * @brief TRNG_SCR3L - RNG Statistical Check Run Length 3 Limit Register (RW)
+ *
+ * Reset value: 0x0058007DU
+ *
+ * The RNG Statistical Check Run Length 3 Limit Register defines the allowable
+ * maximum and minimum number of runs of length 3 detected during entropy
+ * generation. To pass the test, the number of runs of length 3 (for samples of both 0
+ * and 1) must be less than the programmed maximum value, and the number of runs of
+ * length 3 must be greater than (maximum - range). If this test fails, the
+ * Retry Counter in SCMISC will be decremented, and a retry will occur if the Retry
+ * Count has not reached zero. If the Retry Count has reached zero, an error will
+ * be generated. Note that this address (0xBASE_062C) is used as SCR3L only if
+ * MCTL[PRGM] is 1. If MCTL[PRGM] is 0, this address is used as SCR3C readback
+ * register.
+ */
+/*!
+ * @name Constants and macros for entire TRNG_SCR3L register
+ */
+/*@{*/
+#define TRNG_SCR3L_REG(base) ((base)->SCR3L)
+#define TRNG_RD_SCR3L(base) (TRNG_SCR3L_REG(base))
+#define TRNG_WR_SCR3L(base, value) (TRNG_SCR3L_REG(base) = (value))
+#define TRNG_RMW_SCR3L(base, mask, value) (TRNG_WR_SCR3L(base, (TRNG_RD_SCR3L(base) & ~(mask)) | (value)))
+/*@}*/
+
+/*
+ * Constants & macros for individual TRNG_SCR3L bitfields
+ */
+
+/*!
+ * @name Register TRNG_SCR3L, field RUN3_MAX[12:0] (RW)
+ *
+ * Run Length 3 Maximum Limit. Defines the maximum allowable runs of length 3
+ * (for both 0 and 1) detected during entropy generation. The number of runs of
+ * length 3 detected during entropy generation must be less than RUN3_MAX, else a
+ * retry or error will occur. This register is cleared to 007Dh (decimal 125) by
+ * writing the MCTL[RST_DEF] bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SCR3L_RUN3_MAX field. */
+#define TRNG_RD_SCR3L_RUN3_MAX(base) ((TRNG_SCR3L_REG(base) & TRNG_SCR3L_RUN3_MAX_MASK) >> TRNG_SCR3L_RUN3_MAX_SHIFT)
+
+/*! @brief Set the RUN3_MAX field to a new value. */
+#define TRNG_WR_SCR3L_RUN3_MAX(base, value) (TRNG_RMW_SCR3L(base, TRNG_SCR3L_RUN3_MAX_MASK, TRNG_SCR3L_RUN3_MAX(value)))
+/*@}*/
+
+/*!
+ * @name Register TRNG_SCR3L, field RUN3_RNG[28:16] (RW)
+ *
+ * Run Length 3 Range. The number of runs of length 3 (for both 0 and 1)
+ * detected during entropy generation must be greater than RUN3_MAX - RUN3_RNG, else a
+ * retry or error will occur. This register is cleared to 0058h (decimal 88) by
+ * writing the MCTL[RST_DEF] bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SCR3L_RUN3_RNG field. */
+#define TRNG_RD_SCR3L_RUN3_RNG(base) ((TRNG_SCR3L_REG(base) & TRNG_SCR3L_RUN3_RNG_MASK) >> TRNG_SCR3L_RUN3_RNG_SHIFT)
+
+/*! @brief Set the RUN3_RNG field to a new value. */
+#define TRNG_WR_SCR3L_RUN3_RNG(base, value) (TRNG_RMW_SCR3L(base, TRNG_SCR3L_RUN3_RNG_MASK, TRNG_SCR3L_RUN3_RNG(value)))
+/*@}*/
+
+/*******************************************************************************
+ * TRNG_SCR4L - RNG Statistical Check Run Length 4 Limit Register
+ ******************************************************************************/
+
+/*!
+ * @brief TRNG_SCR4L - RNG Statistical Check Run Length 4 Limit Register (RW)
+ *
+ * Reset value: 0x0040004BU
+ *
+ * The RNG Statistical Check Run Length 4 Limit Register defines the allowable
+ * maximum and minimum number of runs of length 4 detected during entropy
+ * generation. To pass the test, the number of runs of length 4 (for samples of both 0
+ * and 1) must be less than the programmed maximum value, and the number of runs of
+ * length 4 must be greater than (maximum - range). If this test fails, the
+ * Retry Counter in SCMISC will be decremented, and a retry will occur if the Retry
+ * Count has not reached zero. If the Retry Count has reached zero, an error will
+ * be generated. Note that this address (0xBASE_0630) is used as SCR4L only if
+ * MCTL[PRGM] is 1. If MCTL[PRGM] is 0, this address is used as SCR4C readback
+ * register.
+ */
+/*!
+ * @name Constants and macros for entire TRNG_SCR4L register
+ */
+/*@{*/
+#define TRNG_SCR4L_REG(base) ((base)->SCR4L)
+#define TRNG_RD_SCR4L(base) (TRNG_SCR4L_REG(base))
+#define TRNG_WR_SCR4L(base, value) (TRNG_SCR4L_REG(base) = (value))
+#define TRNG_RMW_SCR4L(base, mask, value) (TRNG_WR_SCR4L(base, (TRNG_RD_SCR4L(base) & ~(mask)) | (value)))
+/*@}*/
+
+/*
+ * Constants & macros for individual TRNG_SCR4L bitfields
+ */
+
+/*!
+ * @name Register TRNG_SCR4L, field RUN4_MAX[11:0] (RW)
+ *
+ * Run Length 4 Maximum Limit. Defines the maximum allowable runs of length 4
+ * (for both 0 and 1) detected during entropy generation. The number of runs of
+ * length 4 detected during entropy generation must be less than RUN4_MAX, else a
+ * retry or error will occur. This register is cleared to 004Bh (decimal 75) by
+ * writing the MCTL[RST_DEF] bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SCR4L_RUN4_MAX field. */
+#define TRNG_RD_SCR4L_RUN4_MAX(base) ((TRNG_SCR4L_REG(base) & TRNG_SCR4L_RUN4_MAX_MASK) >> TRNG_SCR4L_RUN4_MAX_SHIFT)
+
+/*! @brief Set the RUN4_MAX field to a new value. */
+#define TRNG_WR_SCR4L_RUN4_MAX(base, value) (TRNG_RMW_SCR4L(base, TRNG_SCR4L_RUN4_MAX_MASK, TRNG_SCR4L_RUN4_MAX(value)))
+/*@}*/
+
+/*!
+ * @name Register TRNG_SCR4L, field RUN4_RNG[27:16] (RW)
+ *
+ * Run Length 4 Range. The number of runs of length 4 (for both 0 and 1)
+ * detected during entropy generation must be greater than RUN4_MAX - RUN4_RNG, else a
+ * retry or error will occur. This register is cleared to 0040h (decimal 64) by
+ * writing the MCTL[RST_DEF] bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SCR4L_RUN4_RNG field. */
+#define TRNG_RD_SCR4L_RUN4_RNG(base) ((TRNG_SCR4L_REG(base) & TRNG_SCR4L_RUN4_RNG_MASK) >> TRNG_SCR4L_RUN4_RNG_SHIFT)
+
+/*! @brief Set the RUN4_RNG field to a new value. */
+#define TRNG_WR_SCR4L_RUN4_RNG(base, value) (TRNG_RMW_SCR4L(base, TRNG_SCR4L_RUN4_RNG_MASK, TRNG_SCR4L_RUN4_RNG(value)))
+/*@}*/
+
+/*******************************************************************************
+ * TRNG_SCR5L - RNG Statistical Check Run Length 5 Limit Register
+ ******************************************************************************/
+
+/*!
+ * @brief TRNG_SCR5L - RNG Statistical Check Run Length 5 Limit Register (RW)
+ *
+ * Reset value: 0x002E002FU
+ *
+ * The RNG Statistical Check Run Length 5 Limit Register defines the allowable
+ * maximum and minimum number of runs of length 5 detected during entropy
+ * generation. To pass the test, the number of runs of length 5 (for samples of both 0
+ * and 1) must be less than the programmed maximum value, and the number of runs of
+ * length 5 must be greater than (maximum - range). If this test fails, the
+ * Retry Counter in SCMISC will be decremented, and a retry will occur if the Retry
+ * Count has not reached zero. If the Retry Count has reached zero, an error will
+ * be generated. Note that this address (0xBASE_0634) is used as SCR5L only if
+ * MCTL[PRGM] is 1. If MCTL[PRGM] is 0, this address is used as SCR5C readback
+ * register.
+ */
+/*!
+ * @name Constants and macros for entire TRNG_SCR5L register
+ */
+/*@{*/
+#define TRNG_SCR5L_REG(base) ((base)->SCR5L)
+#define TRNG_RD_SCR5L(base) (TRNG_SCR5L_REG(base))
+#define TRNG_WR_SCR5L(base, value) (TRNG_SCR5L_REG(base) = (value))
+#define TRNG_RMW_SCR5L(base, mask, value) (TRNG_WR_SCR5L(base, (TRNG_RD_SCR5L(base) & ~(mask)) | (value)))
+/*@}*/
+
+/*
+ * Constants & macros for individual TRNG_SCR5L bitfields
+ */
+
+/*!
+ * @name Register TRNG_SCR5L, field RUN5_MAX[10:0] (RW)
+ *
+ * Run Length 5 Maximum Limit. Defines the maximum allowable runs of length 5
+ * (for both 0 and 1) detected during entropy generation. The number of runs of
+ * length 5 detected during entropy generation must be less than RUN5_MAX, else a
+ * retry or error will occur. This register is cleared to 002Fh (decimal 47) by
+ * writing the MCTL[RST_DEF] bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SCR5L_RUN5_MAX field. */
+#define TRNG_RD_SCR5L_RUN5_MAX(base) ((TRNG_SCR5L_REG(base) & TRNG_SCR5L_RUN5_MAX_MASK) >> TRNG_SCR5L_RUN5_MAX_SHIFT)
+
+/*! @brief Set the RUN5_MAX field to a new value. */
+#define TRNG_WR_SCR5L_RUN5_MAX(base, value) (TRNG_RMW_SCR5L(base, TRNG_SCR5L_RUN5_MAX_MASK, TRNG_SCR5L_RUN5_MAX(value)))
+/*@}*/
+
+/*!
+ * @name Register TRNG_SCR5L, field RUN5_RNG[26:16] (RW)
+ *
+ * Run Length 5 Range. The number of runs of length 5 (for both 0 and 1)
+ * detected during entropy generation must be greater than RUN5_MAX - RUN5_RNG, else a
+ * retry or error will occur. This register is cleared to 002Eh (decimal 46) by
+ * writing the MCTL[RST_DEF] bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SCR5L_RUN5_RNG field. */
+#define TRNG_RD_SCR5L_RUN5_RNG(base) ((TRNG_SCR5L_REG(base) & TRNG_SCR5L_RUN5_RNG_MASK) >> TRNG_SCR5L_RUN5_RNG_SHIFT)
+
+/*! @brief Set the RUN5_RNG field to a new value. */
+#define TRNG_WR_SCR5L_RUN5_RNG(base, value) (TRNG_RMW_SCR5L(base, TRNG_SCR5L_RUN5_RNG_MASK, TRNG_SCR5L_RUN5_RNG(value)))
+/*@}*/
+
+/*******************************************************************************
+ * TRNG_SCR6PL - RNG Statistical Check Run Length 6+ Limit Register
+ ******************************************************************************/
+
+/*!
+ * @brief TRNG_SCR6PL - RNG Statistical Check Run Length 6+ Limit Register (RW)
+ *
+ * Reset value: 0x002E002FU
+ *
+ * The RNG Statistical Check Run Length 6+ Limit Register defines the allowable
+ * maximum and minimum number of runs of length 6 or more detected during entropy
+ * generation. To pass the test, the number of runs of length 6 or more (for
+ * samples of both 0 and 1) must be less than the programmed maximum value, and the
+ * number of runs of length 6 or more must be greater than (maximum - range). If
+ * this test fails, the Retry Counter in SCMISC will be decremented, and a retry
+ * will occur if the Retry Count has not reached zero. If the Retry Count has
+ * reached zero, an error will be generated. Note that this offset (0xBASE_0638) is
+ * used as SCR6PL only if MCTL[PRGM] is 1. If MCTL[PRGM] is 0, this offset is
+ * used as SCR6PC readback register.
+ */
+/*!
+ * @name Constants and macros for entire TRNG_SCR6PL register
+ */
+/*@{*/
+#define TRNG_SCR6PL_REG(base) ((base)->SCR6PL)
+#define TRNG_RD_SCR6PL(base) (TRNG_SCR6PL_REG(base))
+#define TRNG_WR_SCR6PL(base, value) (TRNG_SCR6PL_REG(base) = (value))
+#define TRNG_RMW_SCR6PL(base, mask, value) (TRNG_WR_SCR6PL(base, (TRNG_RD_SCR6PL(base) & ~(mask)) | (value)))
+/*@}*/
+
+/*
+ * Constants & macros for individual TRNG_SCR6PL bitfields
+ */
+
+/*!
+ * @name Register TRNG_SCR6PL, field RUN6P_MAX[10:0] (RW)
+ *
+ * Run Length 6+ Maximum Limit. Defines the maximum allowable runs of length 6
+ * or more (for both 0 and 1) detected during entropy generation. The number of
+ * runs of length 6 or more detected during entropy generation must be less than
+ * RUN6P_MAX, else a retry or error will occur. This register is cleared to 002Fh
+ * (decimal 47) by writing the MCTL[RST_DEF] bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SCR6PL_RUN6P_MAX field. */
+#define TRNG_RD_SCR6PL_RUN6P_MAX(base) \
+    ((TRNG_SCR6PL_REG(base) & TRNG_SCR6PL_RUN6P_MAX_MASK) >> TRNG_SCR6PL_RUN6P_MAX_SHIFT)
+
+/*! @brief Set the RUN6P_MAX field to a new value. */
+#define TRNG_WR_SCR6PL_RUN6P_MAX(base, value) \
+    (TRNG_RMW_SCR6PL(base, TRNG_SCR6PL_RUN6P_MAX_MASK, TRNG_SCR6PL_RUN6P_MAX(value)))
+/*@}*/
+
+/*!
+ * @name Register TRNG_SCR6PL, field RUN6P_RNG[26:16] (RW)
+ *
+ * Run Length 6+ Range. The number of runs of length 6 or more (for both 0 and
+ * 1) detected during entropy generation must be greater than RUN6P_MAX -
+ * RUN6P_RNG, else a retry or error will occur. This register is cleared to 002Eh
+ * (decimal 46) by writing the MCTL[RST_DEF] bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SCR6PL_RUN6P_RNG field. */
+#define TRNG_RD_SCR6PL_RUN6P_RNG(base) \
+    ((TRNG_SCR6PL_REG(base) & TRNG_SCR6PL_RUN6P_RNG_MASK) >> TRNG_SCR6PL_RUN6P_RNG_SHIFT)
+
+/*! @brief Set the RUN6P_RNG field to a new value. */
+#define TRNG_WR_SCR6PL_RUN6P_RNG(base, value) \
+    (TRNG_RMW_SCR6PL(base, TRNG_SCR6PL_RUN6P_RNG_MASK, TRNG_SCR6PL_RUN6P_RNG(value)))
+/*@}*/
+
+/*******************************************************************************
+ * TRNG_PKRMAX - RNG Poker Maximum Limit Register
+ ******************************************************************************/
+
+/*!
+ * @brief TRNG_PKRMAX - RNG Poker Maximum Limit Register (RW)
+ *
+ * Reset value: 0x00006920U
+ *
+ * The RNG Poker Maximum Limit Register defines Maximum Limit allowable during
+ * the TRNG Statistical Check Poker Test. Note that this offset (0xBASE_060C) is
+ * used as PKRMAX only if MCTL[PRGM] is 1. If MCTL[PRGM] is 0, this offset is used
+ * as the PKRSQ readback register.
+ */
+/*!
+ * @name Constants and macros for entire TRNG_PKRMAX register
+ */
+/*@{*/
+#define TRNG_PKRMAX_REG(base) ((base)->PKRMAX)
+#define TRNG_RD_PKRMAX(base) (TRNG_PKRMAX_REG(base))
+#define TRNG_WR_PKRMAX(base, value) (TRNG_PKRMAX_REG(base) = (value))
+#define TRNG_RMW_PKRMAX(base, mask, value) (TRNG_WR_PKRMAX(base, (TRNG_RD_PKRMAX(base) & ~(mask)) | (value)))
+/*@}*/
+
+/*
+ * Constants & macros for individual TRNG_PKRMAX bitfields
+ */
+
+/*!
+ * @name Register TRNG_PKRMAX, field PKR_MAX[23:0] (RW)
+ *
+ * Poker Maximum Limit. During the TRNG Statistical Checks, a "Poker Test" is
+ * run which requires a maximum and minimum limit. The maximum allowable result is
+ * programmed in the PKRMAX[PKR_MAX] register. This field is writable only if
+ * MCTL[PRGM] bit is 1. This register is cleared to 006920h (decimal 26912) by
+ * writing the MCTL[RST_DEF] bit to 1. Note that the PKRMAX and PKRRNG registers
+ * combined are used to define the minimum allowable Poker result, which is PKR_MAX -
+ * PKR_RNG + 1. Note that if MCTL[PRGM] bit is 0, this register address is used
+ * to read the Poker Test Square Calculation result in register PKRSQ, as defined
+ * in the following section.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_PKRMAX_PKR_MAX field. */
+#define TRNG_RD_PKRMAX_PKR_MAX(base) ((TRNG_PKRMAX_REG(base) & TRNG_PKRMAX_PKR_MAX_MASK) >> TRNG_PKRMAX_PKR_MAX_SHIFT)
+
+/*! @brief Set the PKR_MAX field to a new value. */
+#define TRNG_WR_PKRMAX_PKR_MAX(base, value) \
+    (TRNG_RMW_PKRMAX(base, TRNG_PKRMAX_PKR_MAX_MASK, TRNG_PKRMAX_PKR_MAX(value)))
+/*@}*/
+
+/*******************************************************************************
+ * TRNG_PKRRNG - RNG Poker Range Register
+ ******************************************************************************/
+
+/*!
+ * @brief TRNG_PKRRNG - RNG Poker Range Register (RW)
+ *
+ * Reset value: 0x000009A3U
+ *
+ * The RNG Poker Range Register defines the difference between the TRNG Poker
+ * Maximum Limit and the minimum limit. These limits are used during the TRNG
+ * Statistical Check Poker Test.
+ */
+/*!
+ * @name Constants and macros for entire TRNG_PKRRNG register
+ */
+/*@{*/
+#define TRNG_PKRRNG_REG(base) ((base)->PKRRNG)
+#define TRNG_RD_PKRRNG(base) (TRNG_PKRRNG_REG(base))
+#define TRNG_WR_PKRRNG(base, value) (TRNG_PKRRNG_REG(base) = (value))
+#define TRNG_RMW_PKRRNG(base, mask, value) (TRNG_WR_PKRRNG(base, (TRNG_RD_PKRRNG(base) & ~(mask)) | (value)))
+/*@}*/
+
+/*
+ * Constants & macros for individual TRNG_PKRRNG bitfields
+ */
+
+/*!
+ * @name Register TRNG_PKRRNG, field PKR_RNG[15:0] (RW)
+ *
+ * Poker Range. During the TRNG Statistical Checks, a "Poker Test" is run which
+ * requires a maximum and minimum limit. The maximum is programmed in the
+ * RTPKRMAX[PKR_MAX] register, and the minimum is derived by subtracting the PKR_RNG
+ * value from the programmed maximum value. This field is writable only if
+ * MCTL[PRGM] bit is 1. This field will read zeroes if MCTL[PRGM] = 0. This field is
+ * cleared to 09A3h (decimal 2467) by writing the MCTL[RST_DEF] bit to 1. Note that
+ * the minimum allowable Poker result is PKR_MAX - PKR_RNG + 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_PKRRNG_PKR_RNG field. */
+#define TRNG_RD_PKRRNG_PKR_RNG(base) ((TRNG_PKRRNG_REG(base) & TRNG_PKRRNG_PKR_RNG_MASK) >> TRNG_PKRRNG_PKR_RNG_SHIFT)
+
+/*! @brief Set the PKR_RNG field to a new value. */
+#define TRNG_WR_PKRRNG_PKR_RNG(base, value) \
+    (TRNG_RMW_PKRRNG(base, TRNG_PKRRNG_PKR_RNG_MASK, TRNG_PKRRNG_PKR_RNG(value)))
+/*@}*/
+
+/*******************************************************************************
+ * TRNG_FRQMAX - RNG Frequency Count Maximum Limit Register
+ ******************************************************************************/
+
+/*!
+ * @brief TRNG_FRQMAX - RNG Frequency Count Maximum Limit Register (RW)
+ *
+ * Reset value: 0x00006400U
+ *
+ * The RNG Frequency Count Maximum Limit Register defines the maximum allowable
+ * count taken by the Entropy sample counter during each Entropy sample. During
+ * any sample period, if the count is greater than this programmed maximum, a
+ * Frequency Count Fail is flagged in MCTL[FCT_FAIL] and an error is generated. Note
+ * that this address (061C) is used as FRQMAX only if MCTL[PRGM] is 1. If
+ * MCTL[PRGM] is 0, this address is used as FRQCNT readback register.
+ */
+/*!
+ * @name Constants and macros for entire TRNG_FRQMAX register
+ */
+/*@{*/
+#define TRNG_FRQMAX_REG(base) ((base)->FRQMAX)
+#define TRNG_RD_FRQMAX(base) (TRNG_FRQMAX_REG(base))
+#define TRNG_WR_FRQMAX(base, value) (TRNG_FRQMAX_REG(base) = (value))
+#define TRNG_RMW_FRQMAX(base, mask, value) (TRNG_WR_FRQMAX(base, (TRNG_RD_FRQMAX(base) & ~(mask)) | (value)))
+/*@}*/
+
+/*
+ * Constants & macros for individual TRNG_FRQMAX bitfields
+ */
+
+/*!
+ * @name Register TRNG_FRQMAX, field FRQ_MAX[21:0] (RW)
+ *
+ * Frequency Counter Maximum Limit. Defines the maximum allowable count taken
+ * during each entropy sample. This field is writable only if MCTL[PRGM] bit is 1.
+ * This register is cleared to 000640h by writing the MCTL[RST_DEF] bit to 1.
+ * Note that if MCTL[PRGM] bit is 0, this register address is used to read the
+ * Frequency Count result in register FRQCNT, as defined in the following section.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_FRQMAX_FRQ_MAX field. */
+#define TRNG_RD_FRQMAX_FRQ_MAX(base) ((TRNG_FRQMAX_REG(base) & TRNG_FRQMAX_FRQ_MAX_MASK) >> TRNG_FRQMAX_FRQ_MAX_SHIFT)
+
+/*! @brief Set the FRQ_MAX field to a new value. */
+#define TRNG_WR_FRQMAX_FRQ_MAX(base, value) \
+    (TRNG_RMW_FRQMAX(base, TRNG_FRQMAX_FRQ_MAX_MASK, TRNG_FRQMAX_FRQ_MAX(value)))
+/*@}*/
+
+/*******************************************************************************
+ * TRNG_FRQMIN - RNG Frequency Count Minimum Limit Register
+ ******************************************************************************/
+
+/*!
+ * @brief TRNG_FRQMIN - RNG Frequency Count Minimum Limit Register (RW)
+ *
+ * Reset value: 0x00000640U
+ *
+ * The RNG Frequency Count Minimum Limit Register defines the minimum allowable
+ * count taken by the Entropy sample counter during each Entropy sample. During
+ * any sample period, if the count is less than this programmed minimum, a
+ * Frequency Count Fail is flagged in MCTL[FCT_FAIL] and an error is generated.
+ */
+/*!
+ * @name Constants and macros for entire TRNG_FRQMIN register
+ */
+/*@{*/
+#define TRNG_FRQMIN_REG(base) ((base)->FRQMIN)
+#define TRNG_RD_FRQMIN(base) (TRNG_FRQMIN_REG(base))
+#define TRNG_WR_FRQMIN(base, value) (TRNG_FRQMIN_REG(base) = (value))
+#define TRNG_RMW_FRQMIN(base, mask, value) (TRNG_WR_FRQMIN(base, (TRNG_RD_FRQMIN(base) & ~(mask)) | (value)))
+/*@}*/
+
+/*
+ * Constants & macros for individual TRNG_FRQMIN bitfields
+ */
+
+/*!
+ * @name Register TRNG_FRQMIN, field FRQ_MIN[21:0] (RW)
+ *
+ * Frequency Count Minimum Limit. Defines the minimum allowable count taken
+ * during each entropy sample. This field is writable only if MCTL[PRGM] bit is 1.
+ * This field will read zeroes if MCTL[PRGM] = 0. This field is cleared to 0000h64
+ * by writing the MCTL[RST_DEF] bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_FRQMIN_FRQ_MIN field. */
+#define TRNG_RD_FRQMIN_FRQ_MIN(base) ((TRNG_FRQMIN_REG(base) & TRNG_FRQMIN_FRQ_MIN_MASK) >> TRNG_FRQMIN_FRQ_MIN_SHIFT)
+
+/*! @brief Set the FRQ_MIN field to a new value. */
+#define TRNG_WR_FRQMIN_FRQ_MIN(base, value) \
+    (TRNG_RMW_FRQMIN(base, TRNG_FRQMIN_FRQ_MIN_MASK, TRNG_FRQMIN_FRQ_MIN(value)))
+/*@}*/
+
+/*******************************************************************************
+ * TRNG_MCTL - RNG Miscellaneous Control Register
+ ******************************************************************************/
+
+/*!
+ * @brief TRNG_MCTL - RNG Miscellaneous Control Register (RW)
+ *
+ * Reset value: 0x00012001U
+ *
+ * This register is intended to be used for programming, configuring and testing
+ * the RNG. It is the main register to read/write, in order to enable Entropy
+ * generation, to stop entropy generation and to block access to entropy registers.
+ * This is done via the special TRNG_ACC and PRGM bits below. The RNG
+ * Miscellaneous Control Register is a read/write register used to control the RNG's True
+ * Random Number Generator (TRNG) access, operation and test. Note that in many
+ * cases two RNG registers share the same address, and a particular register at the
+ * shared address is selected based upon the value in the PRGM field of the MCTL
+ * register.
+ */
+/*!
+ * @name Constants and macros for entire TRNG_MCTL register
+ */
+/*@{*/
+#define TRNG_MCTL_REG(base) ((base)->MCTL)
+#define TRNG_RD_MCTL(base) (TRNG_MCTL_REG(base))
+#define TRNG_WR_MCTL(base, value) (TRNG_MCTL_REG(base) = (value))
+#define TRNG_RMW_MCTL(base, mask, value) (TRNG_WR_MCTL(base, (TRNG_RD_MCTL(base) & ~(mask)) | (value)))
+/*@}*/
+
+/*!
+ * @name Register TRNG_MCTL, field FOR_SCLK[7] (RW)
+ *
+ * Force System Clock. If set, the system clock is used to operate the TRNG,
+ * instead of the ring oscillator. This is for test use only, and indeterminate
+ * results may occur. This bit is writable only if PRGM bit is 1, or PRGM bit is
+ * being written to 1 simultaneously to writing this bit. This bit is cleared by
+ * writing the RST_DEF bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_MCTL_FOR_SCLK field. */
+#define TRNG_RD_MCTL_FOR_SCLK(base) ((TRNG_MCTL_REG(base) & TRNG_MCTL_FOR_SCLK_MASK) >> TRNG_MCTL_FOR_SCLK_SHIFT)
+
+/*! @brief Set the FOR_SCLK field to a new value. */
+#define TRNG_WR_MCTL_FOR_SCLK(base, value) \
+    (TRNG_RMW_MCTL(base, (TRNG_MCTL_FOR_SCLK_MASK | TRNG_MCTL_ERR_MASK), TRNG_MCTL_FOR_SCLK(value)))
+/*@}*/
+
+/*!
+ * @name Register TRNG_MCTL, field OSC_DIV[3:2] (RW)
+ *
+ * Oscillator Divide. Determines the amount of dividing done to the ring
+ * oscillator before it is used by the TRNG.This field is writable only if PRGM bit is
+ * 1, or PRGM bit is being written to 1 simultaneously to writing this field. This
+ * field is cleared to 00 by writing the RST_DEF bit to 1.
+ *
+ * Values:
+ * - 0b00 - use ring oscillator with no divide
+ * - 0b01 - use ring oscillator divided-by-2
+ * - 0b10 - use ring oscillator divided-by-4
+ * - 0b11 - use ring oscillator divided-by-8
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_MCTL_OSC_DIV field. */
+#define TRNG_RD_MCTL_OSC_DIV(base) ((TRNG_MCTL_REG(base) & TRNG_MCTL_OSC_DIV_MASK) >> TRNG_MCTL_OSC_DIV_SHIFT)
+
+/*! @brief Set the OSC_DIV field to a new value. */
+#define TRNG_WR_MCTL_OSC_DIV(base, value) \
+    (TRNG_RMW_MCTL(base, (TRNG_MCTL_OSC_DIV_MASK | TRNG_MCTL_ERR_MASK), TRNG_MCTL_OSC_DIV(value)))
+/*@}*/
+
+/*!
+ * @name Register TRNG_MCTL, field SAMP_MODE[1:0] (RW)
+ *
+ * Sample Mode. Determines the method of sampling the ring oscillator while
+ * generating the Entropy value:This field is writable only if PRGM bit is 1, or PRGM
+ * bit is being written to 1 simultaneously with writing this field. This field
+ * is cleared to 01 by writing the RST_DEF bit to 1.
+ *
+ * Values:
+ * - 0b00 - use Von Neumann data into both Entropy shifter and Statistical
+ *     Checker
+ * - 0b01 - use raw data into both Entropy shifter and Statistical Checker
+ * - 0b10 - use Von Neumann data into Entropy shifter. Use raw data into
+ *     Statistical Checker
+ * - 0b11 - reserved.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_MCTL_SAMP_MODE field. */
+#define TRNG_RD_MCTL_SAMP_MODE(base) ((TRNG_MCTL_REG(base) & TRNG_MCTL_SAMP_MODE_MASK) >> TRNG_MCTL_SAMP_MODE_SHIFT)
+
+/*! @brief Set the SAMP_MODE field to a new value. */
+#define TRNG_WR_MCTL_SAMP_MODE(base, value) \
+    (TRNG_RMW_MCTL(base, (TRNG_MCTL_SAMP_MODE_MASK | TRNG_MCTL_ERR_MASK), TRNG_MCTL_SAMP_MODE(value)))
+/*@}*/
+
+/*!
+ * @name Register TRNG_MCTL, field PRGM[16] (RW)
+ *
+ * Programming Mode Select. When this bit is 1, the TRNG is in Program Mode,
+ * otherwise it is in Run Mode. No Entropy value will be generated while the TRNG is
+ * in Program Mode. Note that different RNG registers are accessible at the same
+ * address depending on whether PRGM is set to 1 or 0. This is noted in the RNG
+ * register descriptions.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_MCTL_PRGM field. */
+#define TRNG_RD_MCTL_PRGM(base) ((TRNG_MCTL_REG(base) & TRNG_MCTL_PRGM_MASK) >> TRNG_MCTL_PRGM_SHIFT)
+
+/*! @brief Set the PRGM field to a new value. */
+#define TRNG_WR_MCTL_PRGM(base, value) \
+    (TRNG_RMW_MCTL(base, (TRNG_MCTL_PRGM_MASK | TRNG_MCTL_ERR_MASK), TRNG_MCTL_PRGM(value)))
+/*@}*/
+
+/*!
+ * @name Register TRNG_MCTL, field RST_DEF[6] (WO)
+ *
+ * Reset Defaults. Writing a 1 to this bit clears various TRNG registers, and
+ * bits within registers, to their default state. This bit is writable only if PRGM
+ * bit is 1, or PRGM bit is being written to 1 simultaneously to writing this
+ * bit. Reading this bit always produces a 0.
+ */
+/*@{*/
+/*! @brief Set the RST_DEF field to a new value. */
+#define TRNG_WR_MCTL_RST_DEF(base, value) \
+    (TRNG_RMW_MCTL(base, (TRNG_MCTL_RST_DEF_MASK | TRNG_MCTL_ERR_MASK), TRNG_MCTL_RST_DEF(value)))
+/*@}*/
+
+/*!
+ * @name Register TRNG_MCTL, field TRNG_ACC[5] (RW)
+ *
+ * TRNG Access Mode. If this bit is set to 1, the TRNG will generate an Entropy
+ * value that can be read via the ENT0-ENT15 registers. The Entropy value may be
+ * read once the ENT VAL bit is asserted. Also see ENTa register descriptions
+ * (For a = 0 to 15).
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_MCTL_TRNG_ACC field. */
+#define TRNG_RD_MCTL_TRNG_ACC(base) ((TRNG_MCTL_REG(base) & TRNG_MCTL_TRNG_ACC_MASK) >> TRNG_MCTL_TRNG_ACC_SHIFT)
+
+/*! @brief Set the TRNG_ACC field to a new value. */
+#define TRNG_WR_MCTL_TRNG_ACC(base, value) \
+    (TRNG_RMW_MCTL(base, (TRNG_MCTL_TRNG_ACC_MASK | TRNG_MCTL_ERR_MASK), TRNG_MCTL_TRNG_ACC(value)))
+/*@}*/
+
+/*!
+ * @name Register TRNG_MCTL, field TSTOP_OK[13] (RO)
+ *
+ * TRNG_OK_TO_STOP. Software should check that this bit is a 1 before
+ * transitioning RNG to low power mode (RNG clock stopped). RNG turns on the TRNG
+ * free-running ring oscillator whenever new entropy is being generated and turns off the
+ * ring oscillator when entropy generation is complete. If the RNG clock is
+ * stopped while the TRNG ring oscillator is running, the oscillator will continue
+ * running even though the RNG clock is stopped. TSTOP_OK is asserted when the TRNG
+ * ring oscillator is not running. and therefore it is ok to stop the RNG clock.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_MCTL_TSTOP_OK field. */
+#define TRNG_RD_MCTL_TSTOP_OK(base) ((TRNG_MCTL_REG(base) & TRNG_MCTL_TSTOP_OK_MASK) >> TRNG_MCTL_TSTOP_OK_SHIFT)
+/*@}*/
+
+/*!
+ * @name Register TRNG_MCTL, field ENT_VAL[10] (RO)
+ *
+ * Read only: Entropy Valid. Will assert only if TRNG ACC bit is set, and then
+ * after an entropy value is generated. Will be cleared when ENT15 is read. (ENT0
+ * through ENT14 should be read before reading ENT15).
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_MCTL_ENT_VAL field. */
+#define TRNG_RD_MCTL_ENT_VAL(base) ((TRNG_MCTL_REG(base) & TRNG_MCTL_ENT_VAL_MASK) >> TRNG_MCTL_ENT_VAL_SHIFT)
+/*@}*/
+
+/*!
+ * @name Register TRNG_MCTL, field ERR[12] (W1C)
+ *
+ * Read: Error status. 1 = error detected. 0 = no error.Write: Write 1 to clear
+ * errors. Writing 0 has no effect.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_MCTL_ERR field. */
+#define TRNG_RD_MCTL_ERR(base) ((TRNG_MCTL_REG(base) & TRNG_MCTL_ERR_MASK) >> TRNG_MCTL_ERR_SHIFT)
+
+/*! @brief Set the ERR field to a new value. */
+#define TRNG_WR_MCTL_ERR(base, value) (TRNG_RMW_MCTL(base, TRNG_MCTL_ERR_MASK, TRNG_MCTL_ERR(value)))
+/*@}*/
+
+/*******************************************************************************
+ * TRNG_SDCTL - RNG Seed Control Register
+ ******************************************************************************/
+
+/*!
+ * @brief TRNG_SDCTL - RNG Seed Control Register (RW)
+ *
+ * Reset value: 0x0C8009C4U
+ *
+ * The RNG Seed Control Register contains two fields. One field defines the
+ * length (in system clocks) of each Entropy sample (ENT_DLY), and the other field
+ * indicates the number of samples that will taken during each TRNG Entropy
+ * generation (SAMP_SIZE).
+ */
+/*!
+ * @name Constants and macros for entire TRNG_SDCTL register
+ */
+/*@{*/
+#define TRNG_SDCTL_REG(base) ((base)->SDCTL)
+#define TRNG_RD_SDCTL(base) (TRNG_SDCTL_REG(base))
+#define TRNG_WR_SDCTL(base, value) (TRNG_SDCTL_REG(base) = (value))
+#define TRNG_RMW_SDCTL(base, mask, value) (TRNG_WR_SDCTL(base, (TRNG_RD_SDCTL(base) & ~(mask)) | (value)))
+/*@}*/
+
+/*
+ * Constants & macros for individual TRNG_SDCTL bitfields
+ */
+
+/*!
+ * @name Register TRNG_SDCTL, field SAMP_SIZE[15:0] (RW)
+ *
+ * Sample Size. Defines the total number of Entropy samples that will be taken
+ * during Entropy generation. This field is writable only if MCTL[PRGM] bit is 1.
+ * This field will read zeroes if MCTL[PRGM] = 0. This field is cleared to 09C4h
+ * (decimal 2500) by writing the MCTL[RST_DEF] bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SDCTL_SAMP_SIZE field. */
+#define TRNG_RD_SDCTL_SAMP_SIZE(base) ((TRNG_SDCTL_REG(base) & TRNG_SDCTL_SAMP_SIZE_MASK) >> TRNG_SDCTL_SAMP_SIZE_SHIFT)
+
+/*! @brief Set the SAMP_SIZE field to a new value. */
+#define TRNG_WR_SDCTL_SAMP_SIZE(base, value) \
+    (TRNG_RMW_SDCTL(base, TRNG_SDCTL_SAMP_SIZE_MASK, TRNG_SDCTL_SAMP_SIZE(value)))
+/*@}*/
+
+/*!
+ * @name Register TRNG_SDCTL, field ENT_DLY[31:16] (RW)
+ *
+ * Entropy Delay. Defines the length (in system clocks) of each Entropy sample
+ * taken. This field is writable only if MCTL[PRGM] bit is 1. This field will read
+ * zeroes if MCTL[PRGM] = 0. This field is cleared to 0C80h (decimal 3200) by
+ * writing the MCTL[RST_DEF] bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SDCTL_ENT_DLY field. */
+#define TRNG_RD_SDCTL_ENT_DLY(base) ((TRNG_SDCTL_REG(base) & TRNG_SDCTL_ENT_DLY_MASK) >> TRNG_SDCTL_ENT_DLY_SHIFT)
+
+/*! @brief Set the ENT_DLY field to a new value. */
+#define TRNG_WR_SDCTL_ENT_DLY(base, value) (TRNG_RMW_SDCTL(base, TRNG_SDCTL_ENT_DLY_MASK, TRNG_SDCTL_ENT_DLY(value)))
+/*@}*/
+
+/*******************************************************************************
+ * TRNG_SBLIM - RNG Sparse Bit Limit Register
+ ******************************************************************************/
+
+/*!
+ * @brief TRNG_SBLIM - RNG Sparse Bit Limit Register (RW)
+ *
+ * Reset value: 0x0000003FU
+ *
+ * The RNG Sparse Bit Limit Register is used when Von Neumann sampling is
+ * selected during Entropy Generation. It defines the maximum number of consecutive Von
+ * Neumann samples which may be discarded before an error is generated. Note
+ * that this address (0xBASE_0614) is used as SBLIM only if MCTL[PRGM] is 1. If
+ * MCTL[PRGM] is 0, this address is used as TOTSAM readback register.
+ */
+/*!
+ * @name Constants and macros for entire TRNG_SBLIM register
+ */
+/*@{*/
+#define TRNG_SBLIM_REG(base) ((base)->SBLIM)
+#define TRNG_RD_SBLIM(base) (TRNG_SBLIM_REG(base))
+#define TRNG_WR_SBLIM(base, value) (TRNG_SBLIM_REG(base) = (value))
+#define TRNG_RMW_SBLIM(base, mask, value) (TRNG_WR_SBLIM(base, (TRNG_RD_SBLIM(base) & ~(mask)) | (value)))
+/*@}*/
+
+/*
+ * Constants & macros for individual TRNG_SBLIM bitfields
+ */
+
+/*!
+ * @name Register TRNG_SBLIM, field SB_LIM[9:0] (RW)
+ *
+ * Sparse Bit Limit. During Von Neumann sampling (if enabled by MCTL[SAMP_MODE],
+ * samples are discarded if two consecutive raw samples are both 0 or both 1. If
+ * this discarding occurs for a long period of time, it indicates that there is
+ * insufficient Entropy. The Sparse Bit Limit defines the maximum number of
+ * consecutive samples that may be discarded before an error is generated. This field
+ * is writable only if MCTL[PRGM] bit is 1. This register is cleared to 03hF by
+ * writing the MCTL[RST_DEF] bit to 1. Note that if MCTL[PRGM] bit is 0, this
+ * register address is used to read the Total Samples count in register TOTSAM, as
+ * defined in the following section.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SBLIM_SB_LIM field. */
+#define TRNG_RD_SBLIM_SB_LIM(base) ((TRNG_SBLIM_REG(base) & TRNG_SBLIM_SB_LIM_MASK) >> TRNG_SBLIM_SB_LIM_SHIFT)
+
+/*! @brief Set the SB_LIM field to a new value. */
+#define TRNG_WR_SBLIM_SB_LIM(base, value) (TRNG_RMW_SBLIM(base, TRNG_SBLIM_SB_LIM_MASK, TRNG_SBLIM_SB_LIM(value)))
+/*@}*/
+
+/*******************************************************************************
+ * TRNG_SCMISC - RNG Statistical Check Miscellaneous Register
+ ******************************************************************************/
+
+/*!
+ * @brief TRNG_SCMISC - RNG Statistical Check Miscellaneous Register (RW)
+ *
+ * Reset value: 0x0001001FU
+ *
+ * The RNG Statistical Check Miscellaneous Register contains the Long Run
+ * Maximum Limit value and the Retry Count value. This register is accessible only when
+ * the MCTL[PRGM] bit is 1, otherwise this register will read zeroes, and cannot
+ * be written.
+ */
+/*!
+ * @name Constants and macros for entire TRNG_SCMISC register
+ */
+/*@{*/
+#define TRNG_SCMISC_REG(base) ((base)->SCMISC)
+#define TRNG_RD_SCMISC(base) (TRNG_SCMISC_REG(base))
+#define TRNG_WR_SCMISC(base, value) (TRNG_SCMISC_REG(base) = (value))
+#define TRNG_RMW_SCMISC(base, mask, value) (TRNG_WR_SCMISC(base, (TRNG_RD_SCMISC(base) & ~(mask)) | (value)))
+/*@}*/
+
+/*
+ * Constants & macros for individual TRNG_SCMISC bitfields
+ */
+
+/*!
+ * @name Register TRNG_SCMISC, field LRUN_MAX[7:0] (RW)
+ *
+ * LONG RUN MAX LIMIT. This value is the largest allowable number of consecutive
+ * samples of all 1, or all 0, that is allowed during the Entropy generation.
+ * This field is writable only if MCTL[PRGM] bit is 1. This field will read zeroes
+ * if MCTL[PRGM] = 0. This field is cleared to 22h by writing the MCTL[RST_DEF]
+ * bit to 1.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SCMISC_LRUN_MAX field. */
+#define TRNG_RD_SCMISC_LRUN_MAX(base) \
+    ((TRNG_SCMISC_REG(base) & TRNG_SCMISC_LRUN_MAX_MASK) >> TRNG_SCMISC_LRUN_MAX_SHIFT)
+
+/*! @brief Set the LRUN_MAX field to a new value. */
+#define TRNG_WR_SCMISC_LRUN_MAX(base, value) \
+    (TRNG_RMW_SCMISC(base, TRNG_SCMISC_LRUN_MAX_MASK, TRNG_SCMISC_LRUN_MAX(value)))
+/*@}*/
+
+/*******************************************************************************
+ * TRNG_ENT - RNG TRNG Entropy Read Register
+ ******************************************************************************/
+
+/*!
+ * @brief TRNG_ENT - RNG TRNG Entropy Read Register (RO)
+ *
+ * Reset value: 0x00000000U
+ *
+ * The RNG TRNG can be programmed to generate an entropy value that is readable
+ * via the SkyBlue bus. To do this, set the MCTL[TRNG_ACC] bit to 1. Once the
+ * entropy value has been generated, the MCTL[ENT_VAL] bit will be set to 1. At this
+ * point, ENT0 through ENT15 may be read to retrieve the 512-bit entropy value.
+ * Note that once ENT15 is read, the entropy value will be cleared and a new
+ * value will begin generation, so it is important that ENT15 be read last. These
+ * registers are readable only when MCTL[PRGM] = 0 (Run Mode), MCTL[TRNG_ACC] = 1
+ * (TRNG access mode) and MCTL[ENT_VAL] = 1, otherwise zeroes will be read.
+ */
+/*!
+ * @name Constants and macros for entire TRNG_ENT register
+ */
+/*@{*/
+#define TRNG_ENT_REG(base, index) ((base)->ENT[index])
+#define TRNG_RD_ENT(base, index) (TRNG_ENT_REG(base, index))
+/*@}*/
+
+/*******************************************************************************
+ * TRNG_SEC_CFG - RNG Security Configuration Register
+ ******************************************************************************/
+
+/*!
+ * @brief TRNG_SEC_CFG - RNG Security Configuration Register (RW)
+ *
+ * Reset value: 0x00000000U
+ *
+ * The RNG Security Configuration Register is a read/write register used to
+ * control the test mode, programmability and state modes of the RNG. Many bits are
+ * place holders for this version. More configurability will be added here. Clears
+ * on asynchronous reset. For SA-TRNG releases before 2014/July/01, offsets 0xA0
+ * to 0xAC used to be 0xB0 to 0xBC respectively. So, update newer tests that use
+ * these registers, if hard coded.
+ */
+/*!
+ * @name Constants and macros for entire TRNG_SEC_CFG register
+ */
+/*@{*/
+#define TRNG_SEC_CFG_REG(base) ((base)->SEC_CFG)
+#define TRNG_RD_SEC_CFG(base) (TRNG_SEC_CFG_REG(base))
+#define TRNG_WR_SEC_CFG(base, value) (TRNG_SEC_CFG_REG(base) = (value))
+#define TRNG_RMW_SEC_CFG(base, mask, value) (TRNG_WR_SEC_CFG(base, (TRNG_RD_SEC_CFG(base) & ~(mask)) | (value)))
+/*@}*/
+
+/*!
+ * @name Register TRNG_SEC_CFG, field NO_PRGM[1] (RW)
+ *
+ * If set the TRNG registers cannot be programmed. That is, regardless of the
+ * TRNG access mode in the SA-TRNG Miscellaneous Control Register.
+ *
+ * Values:
+ * - 0b0 - Programability of registers controlled only by the RNG Miscellaneous
+ *     Control Register's access mode bit.
+ * - 0b1 - Overides RNG Miscellaneous Control Register access mode and prevents
+ *     TRNG register programming.
+ */
+/*@{*/
+/*! @brief Read current value of the TRNG_SEC_CFG_NO_PRGM field. */
+#define TRNG_RD_SEC_CFG_NO_PRGM(base) \
+    ((TRNG_SEC_CFG_REG(base) & TRNG_SEC_CFG_NO_PRGM_MASK) >> TRNG_SEC_CFG_NO_PRGM_SHIFT)
+
+/*! @brief Set the NO_PRGM field to a new value. */
+#define TRNG_WR_SEC_CFG_NO_PRGM(base, value) \
+    (TRNG_RMW_SEC_CFG(base, TRNG_SEC_CFG_NO_PRGM_MASK, TRNG_SEC_CFG_NO_PRGM(value)))
+/*@}*/
+
+/*******************************************************************************
+ * Prototypes
+ *******************************************************************************/
+static status_t trng_ApplyUserConfig(TRNG_Type *base, const trng_config_t *userConfig);
+static status_t trng_SetRetryCount(TRNG_Type *base, uint8_t retry_count);
+static status_t trng_SetStatisticalCheckLimit(TRNG_Type *base,
+                                              trng_statistical_check_t statistical_check,
+                                              const trng_statistical_check_limit_t *limit);
+static uint32_t trng_ReadEntropy(TRNG_Type *base, uint32_t index);
+
+/*******************************************************************************
+ * Code
+ ******************************************************************************/
+
+/*FUNCTION*********************************************************************
+ *
+ * Function Name : TRNG_InitUserConfigDefault
+ * Description   :  Initializes user configuration structure to default settings.
+ *
+ *END*************************************************************************/
+status_t TRNG_GetDefaultConfig(trng_config_t *userConfig)
+{
+    status_t result;
+
+    if (userConfig != 0)
+    {
+        userConfig->lock = TRNG_USER_CONFIG_DEFAULT_LOCK;
+        userConfig->clockMode = kTRNG_ClockModeRingOscillator;
+        userConfig->ringOscDiv = TRNG_USER_CONFIG_DEFAULT_OSC_DIV;
+        userConfig->sampleMode = kTRNG_SampleModeRaw;
+        userConfig->entropyDelay = TRNG_USER_CONFIG_DEFAULT_ENTROPY_DELAY;
+        userConfig->sampleSize = TRNG_USER_CONFIG_DEFAULT_SAMPLE_SIZE;
+        userConfig->sparseBitLimit = TRNG_USER_CONFIG_DEFAULT_SPARSE_BIT_LIMIT;
+
+        /* Statistical Check Parameters.*/
+        userConfig->retryCount = TRNG_USER_CONFIG_DEFAULT_RETRY_COUNT;
+        userConfig->longRunMaxLimit = TRNG_USER_CONFIG_DEFAULT_RUN_MAX_LIMIT;
+
+        userConfig->monobitLimit.maximum = TRNG_USER_CONFIG_DEFAULT_MONOBIT_MAXIMUM;
+        userConfig->monobitLimit.minimum = TRNG_USER_CONFIG_DEFAULT_MONOBIT_MINIMUM;
+        userConfig->runBit1Limit.maximum = TRNG_USER_CONFIG_DEFAULT_RUNBIT1_MAXIMUM;
+        userConfig->runBit1Limit.minimum = TRNG_USER_CONFIG_DEFAULT_RUNBIT1_MINIMUM;
+        userConfig->runBit2Limit.maximum = TRNG_USER_CONFIG_DEFAULT_RUNBIT2_MAXIMUM;
+        userConfig->runBit2Limit.minimum = TRNG_USER_CONFIG_DEFAULT_RUNBIT2_MINIMUM;
+        userConfig->runBit3Limit.maximum = TRNG_USER_CONFIG_DEFAULT_RUNBIT3_MAXIMUM;
+        userConfig->runBit3Limit.minimum = TRNG_USER_CONFIG_DEFAULT_RUNBIT3_MINIMUM;
+        userConfig->runBit4Limit.maximum = TRNG_USER_CONFIG_DEFAULT_RUNBIT4_MAXIMUM;
+        userConfig->runBit4Limit.minimum = TRNG_USER_CONFIG_DEFAULT_RUNBIT4_MINIMUM;
+        userConfig->runBit5Limit.maximum = TRNG_USER_CONFIG_DEFAULT_RUNBIT5_MAXIMUM;
+        userConfig->runBit5Limit.minimum = TRNG_USER_CONFIG_DEFAULT_RUNBIT5_MINIMUM;
+        userConfig->runBit6PlusLimit.maximum = TRNG_USER_CONFIG_DEFAULT_RUNBIT6PLUS_MAXIMUM;
+        userConfig->runBit6PlusLimit.minimum = TRNG_USER_CONFIG_DEFAULT_RUNBIT6PLUS_MINIMUM;
+        userConfig->pokerLimit.maximum = TRNG_USER_CONFIG_DEFAULT_POKER_MAXIMUM;
+        userConfig->pokerLimit.minimum = TRNG_USER_CONFIG_DEFAULT_POKER_MINIMUM;
+        userConfig->frequencyCountLimit.maximum = TRNG_USER_CONFIG_DEFAULT_FREQUENCY_MAXIMUM;
+        userConfig->frequencyCountLimit.minimum = TRNG_USER_CONFIG_DEFAULT_FREQUENCY_MINIMUM;
+
+        result = kStatus_Success;
+    }
+    else
+    {
+        result = kStatus_InvalidArgument;
+    }
+
+    return result;
+}
+
+/*!
+ * @brief Sets the TRNG retry count.
+ *
+ * This function sets the retry counter which defines the number of times a
+ * statistical check may fails during the TRNG Entropy Generation before
+ * generating an error.
+*/
+static status_t trng_SetRetryCount(TRNG_Type *base, uint8_t retry_count)
+{
+    status_t status;
+
+    if ((retry_count >= 1u) && (retry_count <= 15u))
+    {
+        /* Set retry count.*/
+        TRNG_WR_SCMISC_RTY_CT(base, retry_count);
+        status = kStatus_Success;
+    }
+    else
+    {
+        status = kStatus_InvalidArgument;
+    }
+    return status;
+}
+
+/*!
+ * @brief Sets statistical check limits.
+ *
+ * This function is used to set minimum and maximum limits of statistical checks.
+ *
+ */
+static status_t trng_SetStatisticalCheckLimit(TRNG_Type *base,
+                                              trng_statistical_check_t statistical_check,
+                                              const trng_statistical_check_limit_t *limit)
+{
+    uint32_t range;
+    status_t status = kStatus_Success;
+
+    if (limit && (limit->maximum > limit->minimum))
+    {
+        range = limit->maximum - limit->minimum; /* Registers use range instead of minimum value.*/
+
+        switch (statistical_check)
+        {
+            case kTRNG_StatisticalCheckMonobit: /* Allowable maximum and minimum number of ones/zero detected during
+                                                   entropy generation. */
+                if ((range <= 0xffffu) && (limit->maximum <= 0xffffu))
+                {
+                    TRNG_WR_SCML_MONO_MAX(base, limit->maximum);
+                    TRNG_WR_SCML_MONO_RNG(base, range);
+                }
+                else
+                {
+                    status = kStatus_InvalidArgument;
+                }
+                break;
+            case kTRNG_StatisticalCheckRunBit1: /* Allowable maximum and minimum number of runs of length 1 detected
+                                                   during entropy generation. */
+                if ((range <= 0x7fffu) && (limit->maximum <= 0x7fffu))
+                {
+                    TRNG_WR_SCR1L_RUN1_MAX(base, limit->maximum);
+                    TRNG_WR_SCR1L_RUN1_RNG(base, range);
+                }
+                else
+                {
+                    status = kStatus_InvalidArgument;
+                }
+                break;
+            case kTRNG_StatisticalCheckRunBit2: /* Allowable maximum and minimum number of runs of length 2 detected
+                                                   during entropy generation. */
+                if ((range <= 0x3fffu) && (limit->maximum <= 0x3fffu))
+                {
+                    TRNG_WR_SCR2L_RUN2_MAX(base, limit->maximum);
+                    TRNG_WR_SCR2L_RUN2_RNG(base, range);
+                }
+                else
+                {
+                    status = kStatus_InvalidArgument;
+                }
+                break;
+            case kTRNG_StatisticalCheckRunBit3: /* Allowable maximum and minimum number of runs of length 3 detected
+                                                   during entropy generation. */
+                if ((range <= 0x1fffu) && (limit->maximum <= 0x1fffu))
+                {
+                    TRNG_WR_SCR3L_RUN3_MAX(base, limit->maximum);
+                    TRNG_WR_SCR3L_RUN3_RNG(base, range);
+                }
+                else
+                {
+                    status = kStatus_InvalidArgument;
+                }
+                break;
+            case kTRNG_StatisticalCheckRunBit4: /* Allowable maximum and minimum number of runs of length 4 detected
+                                                   during entropy generation. */
+                if ((range <= 0xfffu) && (limit->maximum <= 0xfffu))
+                {
+                    TRNG_WR_SCR4L_RUN4_MAX(base, limit->maximum);
+                    TRNG_WR_SCR4L_RUN4_RNG(base, range);
+                }
+                else
+                {
+                    status = kStatus_InvalidArgument;
+                }
+                break;
+            case kTRNG_StatisticalCheckRunBit5: /* Allowable maximum and minimum number of runs of length 5 detected
+                                                   during entropy generation. */
+                if ((range <= 0x7ffu) && (limit->maximum <= 0x7ffu))
+                {
+                    TRNG_WR_SCR5L_RUN5_MAX(base, limit->maximum);
+                    TRNG_WR_SCR5L_RUN5_RNG(base, range);
+                }
+                else
+                {
+                    status = kStatus_InvalidArgument;
+                }
+                break;
+            case kTRNG_StatisticalCheckRunBit6Plus: /* Allowable maximum and minimum number of length 6 or more detected
+                                                       during entropy generation */
+                if ((range <= 0x7ffu) && (limit->maximum <= 0x7ffu))
+                {
+                    TRNG_WR_SCR6PL_RUN6P_MAX(base, limit->maximum);
+                    TRNG_WR_SCR6PL_RUN6P_RNG(base, range);
+                }
+                else
+                {
+                    status = kStatus_InvalidArgument;
+                }
+                break;
+            case kTRNG_StatisticalCheckPoker: /* Allowable maximum and minimum limit of "Poker Test" detected during
+                                                 entropy generation . */
+                if ((range <= 0xffffu) && (limit->maximum <= 0xffffffu))
+                {
+                    TRNG_WR_PKRMAX_PKR_MAX(base, limit->maximum);
+                    TRNG_WR_PKRRNG_PKR_RNG(base, range);
+                }
+                else
+                {
+                    status = kStatus_InvalidArgument;
+                }
+                break;
+            case kTRNG_StatisticalCheckFrequencyCount: /* Allowable maximum and minimum limit of entropy sample frquency
+                                                          count during entropy generation . */
+                if ((limit->minimum <= 0x3fffffu) && (limit->maximum <= 0x3fffffu))
+                {
+                    TRNG_WR_FRQMAX_FRQ_MAX(base, limit->maximum);
+                    TRNG_WR_FRQMIN_FRQ_MIN(base, limit->minimum);
+                }
+                else
+                {
+                    status = kStatus_InvalidArgument;
+                }
+                break;
+            default:
+                status = kStatus_InvalidArgument;
+                break;
+        }
+    }
+
+    return status;
+}
+
+/*FUNCTION*********************************************************************
+ *
+ * Function Name : trng_ApplyUserConfig
+ * Description   : Apply user configuration settings to TRNG module.
+ *
+ *END*************************************************************************/
+static status_t trng_ApplyUserConfig(TRNG_Type *base, const trng_config_t *userConfig)
+{
+    status_t status;
+
+    if (((status = trng_SetRetryCount(base, userConfig->retryCount)) == kStatus_Success) &&
+        ((status = trng_SetStatisticalCheckLimit(base, kTRNG_StatisticalCheckMonobit, &userConfig->monobitLimit)) ==
+         kStatus_Success) &&
+        ((status = trng_SetStatisticalCheckLimit(base, kTRNG_StatisticalCheckRunBit1, &userConfig->runBit1Limit)) ==
+         kStatus_Success) &&
+        ((status = trng_SetStatisticalCheckLimit(base, kTRNG_StatisticalCheckRunBit2, &userConfig->runBit2Limit)) ==
+         kStatus_Success) &&
+        ((status = trng_SetStatisticalCheckLimit(base, kTRNG_StatisticalCheckRunBit3, &userConfig->runBit3Limit)) ==
+         kStatus_Success) &&
+        ((status = trng_SetStatisticalCheckLimit(base, kTRNG_StatisticalCheckRunBit4, &userConfig->runBit4Limit)) ==
+         kStatus_Success) &&
+        ((status = trng_SetStatisticalCheckLimit(base, kTRNG_StatisticalCheckRunBit5, &userConfig->runBit5Limit)) ==
+         kStatus_Success) &&
+        ((status = trng_SetStatisticalCheckLimit(base, kTRNG_StatisticalCheckRunBit6Plus,
+                                                 &userConfig->runBit6PlusLimit)) == kStatus_Success) &&
+        ((status = trng_SetStatisticalCheckLimit(base, kTRNG_StatisticalCheckPoker, &userConfig->pokerLimit)) ==
+         kStatus_Success) &&
+        ((status = trng_SetStatisticalCheckLimit(base, kTRNG_StatisticalCheckFrequencyCount,
+                                                 &userConfig->frequencyCountLimit)) == kStatus_Success))
+    {
+        TRNG_WR_MCTL_FOR_SCLK(base, userConfig->clockMode);
+        TRNG_WR_MCTL_OSC_DIV(base, userConfig->ringOscDiv);
+        TRNG_WR_MCTL_SAMP_MODE(base, userConfig->sampleMode);
+        TRNG_WR_SDCTL_ENT_DLY(base, userConfig->entropyDelay);
+        TRNG_WR_SDCTL_SAMP_SIZE(base, userConfig->sampleSize);
+        TRNG_WR_SBLIM_SB_LIM(base, userConfig->sparseBitLimit);
+        TRNG_WR_SCMISC_LRUN_MAX(base, userConfig->longRunMaxLimit);
+    }
+
+    return status;
+}
+
+/*!
+ * @brief Gets a entry data from the TRNG.
+ *
+ * This function gets an entropy data from TRNG.
+ * Entropy data is spread over TRNG_ENT_COUNT registers.
+ * Read register number is defined by index parameter.
+*/
+static uint32_t trng_ReadEntropy(TRNG_Type *base, uint32_t index)
+{
+    uint32_t data;
+
+    index = index % TRNG_ENT_COUNT; /* This way we can use incremental index without limit control from application.*/
+
+    data = TRNG_RD_ENT(base, index);
+
+    if (index == (TRNG_ENT_COUNT - 1))
+    {
+        /* Dummy read. Defect workaround.
+         * TRNG could not clear ENT_VAL  flag automatically, application
+         * had to do a dummy reading operation for anyone TRNG register
+         * to clear it firstly, then to read the RTENT0 to RTENT15 again */
+        index = TRNG_RD_ENT(base, 0);
+    }
+
+    return data;
+}
+
+status_t TRNG_Init(TRNG_Type *base, const trng_config_t *userConfig)
+{
+    status_t result;
+
+    /* Check input parameters.*/
+    if ((base != 0) && (userConfig != 0))
+    {
+#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
+        /* Enable the clock gate. */
+        CLOCK_EnableClock(kCLOCK_Trng0);
+#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
+
+        /* Reset the registers of TRNG module to reset state. */
+        /* Must be in program mode.*/
+        TRNG_WR_MCTL_PRGM(base, kTRNG_WorkModeProgram);
+        /* Reset Defaults.*/
+        TRNG_WR_MCTL_RST_DEF(base, 1);
+
+        /* Set configuration.*/
+        if ((result = trng_ApplyUserConfig(base, userConfig)) == kStatus_Success)
+        {
+            /* Start entropy generation.*/
+            /* Set to Run mode.*/
+            TRNG_WR_MCTL_PRGM(base, kTRNG_WorkModeRun);
+            /* Enable TRNG Access Mode. To generate an Entropy
+            * value that can be read via the true0-true15 registers.*/
+            TRNG_WR_MCTL_TRNG_ACC(base, 1);
+
+            if (userConfig->lock == 1) /* Disable programmability of TRNG registers. */
+            {
+                TRNG_WR_SEC_CFG_NO_PRGM(base, 1);
+            }
+
+            result = kStatus_Success;
+        }
+    }
+    else
+    {
+        result = kStatus_InvalidArgument;
+    }
+
+    return result;
+}
+
+void TRNG_Deinit(TRNG_Type *base)
+{
+    /* Check input parameters.*/
+    if (base)
+    {
+        /* Move to program mode. Stop entropy generation.*/
+        TRNG_WR_MCTL_PRGM(base, kTRNG_WorkModeProgram);
+
+        /* Check before clock stop.
+         TRNG turns on the TRNG free-running ring oscillator whenever new entropy
+         is being generated and turns off the ring oscillator when entropy generation
+         is complete. If the TRNG clock is stopped while the TRNG ring oscillator
+         is running, the oscillator continues running though the RNG clock.
+         is stopped. */
+        while (TRNG_RD_MCTL_TSTOP_OK(base) == 0)
+        {
+        }
+
+#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
+        /* Disable Clock*/
+        CLOCK_DisableClock(kCLOCK_Trng0);
+#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
+    }
+}
+
+status_t TRNG_GetRandomData(TRNG_Type *base, void *data, size_t dataSize)
+{
+    status_t result = kStatus_Success;
+    uint32_t random_32;
+    uint8_t *random_p;
+    uint32_t random_size;
+    uint8_t *data_p = (uint8_t *)data;
+    uint32_t i;
+    int index = 0;
+
+    /* Check input parameters.*/
+    if (base && data && dataSize)
+    {
+        do
+        {
+            /* Wait for Valid or Error flag*/
+            while ((TRNG_RD_MCTL_ENT_VAL(base) == 0) && (TRNG_RD_MCTL_ERR(base) == 0))
+            {
+            }
+
+            /* Check HW error.*/
+            if (TRNG_RD_MCTL_ERR(base))
+            {
+                result = kStatus_Fail; /* TRNG module error occurred */
+                /* Clear error.*/
+                TRNG_WR_MCTL_ERR(base, 1);
+                break; /* No sense stay here.*/
+            }
+
+            /* Read Entropy.*/
+            random_32 = trng_ReadEntropy(base, index++);
+
+            random_p = (uint8_t *)&random_32;
+
+            if (dataSize < sizeof(random_32))
+            {
+                random_size = dataSize;
+            }
+            else
+            {
+                random_size = sizeof(random_32);
+            }
+
+            for (i = 0U; i < random_size; i++)
+            {
+                *data_p++ = *random_p++;
+            }
+
+            dataSize -= random_size;
+        } while (dataSize > 0);
+
+        /* Start a new entropy generation.
+        It is done by reading of the last entropy register.*/
+        if ((index % TRNG_ENT_COUNT) != (TRNG_ENT_COUNT - 1))
+        {
+            trng_ReadEntropy(base, (TRNG_ENT_COUNT - 1));
+        }
+    }
+    else
+    {
+        result = kStatus_InvalidArgument;
+    }
+
+    return result;
+}
+
+#endif /* FSL_FEATURE_SOC_TRNG_COUNT */