![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
Diff: mbed-os/targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_K82F/drivers/fsl_rtc.h
- Revision:
- 0:8fdf9a60065b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-os/targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_K82F/drivers/fsl_rtc.h Wed Oct 10 00:33:53 2018 +0000 @@ -0,0 +1,414 @@ +/* + * Copyright (c) 2015, Freescale Semiconductor, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * o Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * o Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * o Neither the name of Freescale Semiconductor, Inc. nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _FSL_RTC_H_ +#define _FSL_RTC_H_ + +#include "fsl_common.h" + +/*! + * @addtogroup rtc + * @{ + */ + + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/*! @name Driver version */ +/*@{*/ +#define FSL_RTC_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) /*!< Version 2.0.0 */ +/*@}*/ + +/*! @brief List of RTC interrupts */ +typedef enum _rtc_interrupt_enable +{ + kRTC_TimeInvalidInterruptEnable = RTC_IER_TIIE_MASK, /*!< Time invalid interrupt.*/ + kRTC_TimeOverflowInterruptEnable = RTC_IER_TOIE_MASK, /*!< Time overflow interrupt.*/ + kRTC_AlarmInterruptEnable = RTC_IER_TAIE_MASK, /*!< Alarm interrupt.*/ + kRTC_SecondsInterruptEnable = RTC_IER_TSIE_MASK /*!< Seconds interrupt.*/ +} rtc_interrupt_enable_t; + +/*! @brief List of RTC flags */ +typedef enum _rtc_status_flags +{ + kRTC_TimeInvalidFlag = RTC_SR_TIF_MASK, /*!< Time invalid flag */ + kRTC_TimeOverflowFlag = RTC_SR_TOF_MASK, /*!< Time overflow flag */ + kRTC_AlarmFlag = RTC_SR_TAF_MASK /*!< Alarm flag*/ +} rtc_status_flags_t; + +#if (defined(FSL_FEATURE_RTC_HAS_OSC_SCXP) && FSL_FEATURE_RTC_HAS_OSC_SCXP) + +/*! @brief List of RTC Oscillator capacitor load settings */ +typedef enum _rtc_osc_cap_load +{ + kRTC_Capacitor_2p = RTC_CR_SC2P_MASK, /*!< 2 pF capacitor load */ + kRTC_Capacitor_4p = RTC_CR_SC4P_MASK, /*!< 4 pF capacitor load */ + kRTC_Capacitor_8p = RTC_CR_SC8P_MASK, /*!< 8 pF capacitor load */ + kRTC_Capacitor_16p = RTC_CR_SC16P_MASK /*!< 16 pF capacitor load */ +} rtc_osc_cap_load_t; + +#endif /* FSL_FEATURE_SCG_HAS_OSC_SCXP */ + +/*! @brief Structure is used to hold the date and time */ +typedef struct _rtc_datetime +{ + uint16_t year; /*!< Range from 1970 to 2099.*/ + uint8_t month; /*!< Range from 1 to 12.*/ + uint8_t day; /*!< Range from 1 to 31 (depending on month).*/ + uint8_t hour; /*!< Range from 0 to 23.*/ + uint8_t minute; /*!< Range from 0 to 59.*/ + uint8_t second; /*!< Range from 0 to 59.*/ +} rtc_datetime_t; + +/*! + * @brief RTC config structure + * + * This structure holds the configuration settings for the RTC peripheral. To initialize this + * structure to reasonable defaults, call the RTC_GetDefaultConfig() function and pass a + * pointer to your config structure instance. + * + * The config struct can be made const so it resides in flash + */ +typedef struct _rtc_config +{ + bool wakeupSelect; /*!< true: Wakeup pin outputs the 32 KHz clock; + false:Wakeup pin used to wakeup the chip */ + bool updateMode; /*!< true: Registers can be written even when locked under certain + conditions, false: No writes allowed when registers are locked */ + bool supervisorAccess; /*!< true: Non-supervisor accesses are allowed; + false: Non-supervisor accesses are not supported */ + uint32_t compensationInterval; /*!< Compensation interval that is written to the CIR field in RTC TCR Register */ + uint32_t compensationTime; /*!< Compensation time that is written to the TCR field in RTC TCR Register */ +} rtc_config_t; + +/******************************************************************************* + * API + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @name Initialization and deinitialization + * @{ + */ + +/*! + * @brief Ungates the RTC clock and configures the peripheral for basic operation. + * + * This function issues a software reset if the timer invalid flag is set. + * + * @note This API should be called at the beginning of the application using the RTC driver. + * + * @param base RTC peripheral base address + * @param config Pointer to the user's RTC configuration structure. + */ +void RTC_Init(RTC_Type *base, const rtc_config_t *config); + +/*! + * @brief Stops the timer and gate the RTC clock. + * + * @param base RTC peripheral base address + */ +static inline void RTC_Deinit(RTC_Type *base) +{ + /* Stop the RTC timer */ + base->SR &= ~RTC_SR_TCE_MASK; + +#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) + /* Gate the module clock */ + CLOCK_DisableClock(kCLOCK_Rtc0); +#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */ +} + +/*! + * @brief Fills in the RTC config struct with the default settings. + * + * The default values are as follows. + * @code + * config->wakeupSelect = false; + * config->updateMode = false; + * config->supervisorAccess = false; + * config->compensationInterval = 0; + * config->compensationTime = 0; + * @endcode + * @param config Pointer to the user's RTC configuration structure. + */ +void RTC_GetDefaultConfig(rtc_config_t *config); + +/*! @}*/ + +/*! + * @name Current Time & Alarm + * @{ + */ + +/*! + * @brief Sets the RTC date and time according to the given time structure. + * + * The RTC counter must be stopped prior to calling this function because writes to the RTC + * seconds register fail if the RTC counter is running. + * + * @param base RTC peripheral base address + * @param datetime Pointer to the structure where the date and time details are stored. + * + * @return kStatus_Success: Success in setting the time and starting the RTC + * kStatus_InvalidArgument: Error because the datetime format is incorrect + */ +status_t RTC_SetDatetime(RTC_Type *base, const rtc_datetime_t *datetime); + +/*! + * @brief Gets the RTC time and stores it in the given time structure. + * + * @param base RTC peripheral base address + * @param datetime Pointer to the structure where the date and time details are stored. + */ +void RTC_GetDatetime(RTC_Type *base, rtc_datetime_t *datetime); + +/*! + * @brief Sets the RTC alarm time. + * + * The function checks whether the specified alarm time is greater than the present + * time. If not, the function does not set the alarm and returns an error. + * + * @param base RTC peripheral base address + * @param alarmTime Pointer to the structure where the alarm time is stored. + * + * @return kStatus_Success: success in setting the RTC alarm + * kStatus_InvalidArgument: Error because the alarm datetime format is incorrect + * kStatus_Fail: Error because the alarm time has already passed + */ +status_t RTC_SetAlarm(RTC_Type *base, const rtc_datetime_t *alarmTime); + +/*! + * @brief Returns the RTC alarm time. + * + * @param base RTC peripheral base address + * @param datetime Pointer to the structure where the alarm date and time details are stored. + */ +void RTC_GetAlarm(RTC_Type *base, rtc_datetime_t *datetime); + +/*! @}*/ + +/*! + * @name Interrupt Interface + * @{ + */ + +/*! + * @brief Enables the selected RTC interrupts. + * + * @param base RTC peripheral base address + * @param mask The interrupts to enable. This is a logical OR of members of the + * enumeration ::rtc_interrupt_enable_t + */ +static inline void RTC_EnableInterrupts(RTC_Type *base, uint32_t mask) +{ + base->IER |= mask; +} + +/*! + * @brief Disables the selected RTC interrupts. + * + * @param base RTC peripheral base address + * @param mask The interrupts to enable. This is a logical OR of members of the + * enumeration ::rtc_interrupt_enable_t + */ +static inline void RTC_DisableInterrupts(RTC_Type *base, uint32_t mask) +{ + base->IER &= ~mask; +} + +/*! + * @brief Gets the enabled RTC interrupts. + * + * @param base RTC peripheral base address + * + * @return The enabled interrupts. This is the logical OR of members of the + * enumeration ::rtc_interrupt_enable_t + */ +static inline uint32_t RTC_GetEnabledInterrupts(RTC_Type *base) +{ + return (base->IER & (RTC_IER_TIIE_MASK | RTC_IER_TOIE_MASK | RTC_IER_TAIE_MASK | RTC_IER_TSIE_MASK)); +} + +/*! @}*/ + +/*! + * @name Status Interface + * @{ + */ + +/*! + * @brief Gets the RTC status flags. + * + * @param base RTC peripheral base address + * + * @return The status flags. This is the logical OR of members of the + * enumeration ::rtc_status_flags_t + */ +static inline uint32_t RTC_GetStatusFlags(RTC_Type *base) +{ + return (base->SR & (RTC_SR_TIF_MASK | RTC_SR_TOF_MASK | RTC_SR_TAF_MASK)); +} + +/*! + * @brief Clears the RTC status flags. + * + * @param base RTC peripheral base address + * @param mask The status flags to clear. This is a logical OR of members of the + * enumeration ::rtc_status_flags_t + */ +void RTC_ClearStatusFlags(RTC_Type *base, uint32_t mask); + +/*! @}*/ + +/*! + * @name Timer Start and Stop + * @{ + */ + +/*! + * @brief Starts the RTC time counter. + * + * After calling this function, the timer counter increments once a second provided SR[TOF] or + * SR[TIF] are not set. + * + * @param base RTC peripheral base address + */ +static inline void RTC_StartTimer(RTC_Type *base) +{ + base->SR |= RTC_SR_TCE_MASK; +} + +/*! + * @brief Stops the RTC time counter. + * + * RTC's seconds register can be written to only when the timer is stopped. + * + * @param base RTC peripheral base address + */ +static inline void RTC_StopTimer(RTC_Type *base) +{ + base->SR &= ~RTC_SR_TCE_MASK; +} + +/*! @}*/ + +#if (defined(FSL_FEATURE_RTC_HAS_OSC_SCXP) && FSL_FEATURE_RTC_HAS_OSC_SCXP) + +/*! + * @brief This function sets the specified capacitor configuration for the RTC oscillator. + * + * @param base RTC peripheral base address + * @param capLoad Oscillator loads to enable. This is a logical OR of members of the + * enumeration ::rtc_osc_cap_load_t + */ +static inline void RTC_SetOscCapLoad(RTC_Type *base, uint32_t capLoad) +{ + uint32_t reg = base->CR; + + reg &= ~(RTC_CR_SC2P_MASK | RTC_CR_SC4P_MASK | RTC_CR_SC8P_MASK | RTC_CR_SC16P_MASK); + reg |= capLoad; + + base->CR = reg; +} + +#endif /* FSL_FEATURE_SCG_HAS_OSC_SCXP */ + +/*! + * @brief Performs a software reset on the RTC module. + * + * This resets all RTC registers except for the SWR bit and the RTC_WAR and RTC_RAR + * registers. The SWR bit is cleared by software explicitly clearing it. + * + * @param base RTC peripheral base address + */ +static inline void RTC_Reset(RTC_Type *base) +{ + base->CR |= RTC_CR_SWR_MASK; + base->CR &= ~RTC_CR_SWR_MASK; + + /* Set TSR register to 0x1 to avoid the timer invalid (TIF) bit being set in the SR register */ + base->TSR = 1U; +} + +#if defined(FSL_FEATURE_RTC_HAS_MONOTONIC) && (FSL_FEATURE_RTC_HAS_MONOTONIC) + +/*! + * @name Monotonic counter functions + * @{ + */ + +/*! + * @brief Reads the values of the Monotonic Counter High and Monotonic Counter Low and returns + * them as a single value. + * + * @param base RTC peripheral base address + * @param counter Pointer to variable where the value is stored. + */ +void RTC_GetMonotonicCounter(RTC_Type *base, uint64_t *counter); + +/*! + * @brief Writes values Monotonic Counter High and Monotonic Counter Low by decomposing + * the given single value. + * + * @param base RTC peripheral base address + * @param counter Counter value + */ +void RTC_SetMonotonicCounter(RTC_Type *base, uint64_t counter); + +/*! + * @brief Increments the Monotonic Counter by one. + * + * Increments the Monotonic Counter (registers RTC_MCLR and RTC_MCHR accordingly) by setting + * the monotonic counter enable (MER[MCE]) and then writing to the RTC_MCLR register. A write to the + * monotonic counter low that causes it to overflow also increments the monotonic counter high. + * + * @param base RTC peripheral base address + * + * @return kStatus_Success: success + * kStatus_Fail: error occurred, either time invalid or monotonic overflow flag was found + */ +status_t RTC_IncrementMonotonicCounter(RTC_Type *base); + +/*! @}*/ + +#endif /* FSL_FEATURE_RTC_HAS_MONOTONIC */ + +#if defined(__cplusplus) +} +#endif + +/*! @}*/ + +#endif /* _FSL_RTC_H_ */