![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
Diff: mbed-os/targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_K82F/drivers/fsl_lpuart.h
- Revision:
- 0:8fdf9a60065b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-os/targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_K82F/drivers/fsl_lpuart.h Wed Oct 10 00:33:53 2018 +0000 @@ -0,0 +1,814 @@ +/* + * Copyright (c) 2015-2016, Freescale Semiconductor, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * o Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * o Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * o Neither the name of Freescale Semiconductor, Inc. nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _FSL_LPUART_H_ +#define _FSL_LPUART_H_ + +#include "fsl_common.h" + +/*! + * @addtogroup lpuart_driver + * @{ + */ + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/*! @name Driver version */ +/*@{*/ +/*! @brief LPUART driver version 2.2.1. */ +#define FSL_LPUART_DRIVER_VERSION (MAKE_VERSION(2, 2, 3)) +/*@}*/ + +/*! @brief Error codes for the LPUART driver. */ +enum _lpuart_status +{ + kStatus_LPUART_TxBusy = MAKE_STATUS(kStatusGroup_LPUART, 0), /*!< TX busy */ + kStatus_LPUART_RxBusy = MAKE_STATUS(kStatusGroup_LPUART, 1), /*!< RX busy */ + kStatus_LPUART_TxIdle = MAKE_STATUS(kStatusGroup_LPUART, 2), /*!< LPUART transmitter is idle. */ + kStatus_LPUART_RxIdle = MAKE_STATUS(kStatusGroup_LPUART, 3), /*!< LPUART receiver is idle. */ + kStatus_LPUART_TxWatermarkTooLarge = MAKE_STATUS(kStatusGroup_LPUART, 4), /*!< TX FIFO watermark too large */ + kStatus_LPUART_RxWatermarkTooLarge = MAKE_STATUS(kStatusGroup_LPUART, 5), /*!< RX FIFO watermark too large */ + kStatus_LPUART_FlagCannotClearManually = MAKE_STATUS(kStatusGroup_LPUART, 6), /*!< Some flag can't manually clear */ + kStatus_LPUART_Error = MAKE_STATUS(kStatusGroup_LPUART, 7), /*!< Error happens on LPUART. */ + kStatus_LPUART_RxRingBufferOverrun = + MAKE_STATUS(kStatusGroup_LPUART, 8), /*!< LPUART RX software ring buffer overrun. */ + kStatus_LPUART_RxHardwareOverrun = MAKE_STATUS(kStatusGroup_LPUART, 9), /*!< LPUART RX receiver overrun. */ + kStatus_LPUART_NoiseError = MAKE_STATUS(kStatusGroup_LPUART, 10), /*!< LPUART noise error. */ + kStatus_LPUART_FramingError = MAKE_STATUS(kStatusGroup_LPUART, 11), /*!< LPUART framing error. */ + kStatus_LPUART_ParityError = MAKE_STATUS(kStatusGroup_LPUART, 12), /*!< LPUART parity error. */ + kStatus_LPUART_BaudrateNotSupport = + MAKE_STATUS(kStatusGroup_LPUART, 13), /*!< Baudrate is not support in current clock source */ +}; + +/*! @brief LPUART parity mode. */ +typedef enum _lpuart_parity_mode +{ + kLPUART_ParityDisabled = 0x0U, /*!< Parity disabled */ + kLPUART_ParityEven = 0x2U, /*!< Parity enabled, type even, bit setting: PE|PT = 10 */ + kLPUART_ParityOdd = 0x3U, /*!< Parity enabled, type odd, bit setting: PE|PT = 11 */ +} lpuart_parity_mode_t; + +/*! @brief LPUART data bits count. */ +typedef enum _lpuart_data_bits +{ + kLPUART_EightDataBits = 0x0U, /*!< Eight data bit */ +#if defined(FSL_FEATURE_LPUART_HAS_7BIT_DATA_SUPPORT) && FSL_FEATURE_LPUART_HAS_7BIT_DATA_SUPPORT + kLPUART_SevenDataBits = 0x1U, /*!< Seven data bit */ +#endif +} lpuart_data_bits_t; + +/*! @brief LPUART stop bit count. */ +typedef enum _lpuart_stop_bit_count +{ + kLPUART_OneStopBit = 0U, /*!< One stop bit */ + kLPUART_TwoStopBit = 1U, /*!< Two stop bits */ +} lpuart_stop_bit_count_t; + +/*! + * @brief LPUART interrupt configuration structure, default settings all disabled. + * + * This structure contains the settings for all LPUART interrupt configurations. + */ +enum _lpuart_interrupt_enable +{ +#if defined(FSL_FEATURE_LPUART_HAS_LIN_BREAK_DETECT) && FSL_FEATURE_LPUART_HAS_LIN_BREAK_DETECT + kLPUART_LinBreakInterruptEnable = (LPUART_BAUD_LBKDIE_MASK >> 8), /*!< LIN break detect. */ +#endif + kLPUART_RxActiveEdgeInterruptEnable = (LPUART_BAUD_RXEDGIE_MASK >> 8), /*!< Receive Active Edge. */ + kLPUART_TxDataRegEmptyInterruptEnable = (LPUART_CTRL_TIE_MASK), /*!< Transmit data register empty. */ + kLPUART_TransmissionCompleteInterruptEnable = (LPUART_CTRL_TCIE_MASK), /*!< Transmission complete. */ + kLPUART_RxDataRegFullInterruptEnable = (LPUART_CTRL_RIE_MASK), /*!< Receiver data register full. */ + kLPUART_IdleLineInterruptEnable = (LPUART_CTRL_ILIE_MASK), /*!< Idle line. */ + kLPUART_RxOverrunInterruptEnable = (LPUART_CTRL_ORIE_MASK), /*!< Receiver Overrun. */ + kLPUART_NoiseErrorInterruptEnable = (LPUART_CTRL_NEIE_MASK), /*!< Noise error flag. */ + kLPUART_FramingErrorInterruptEnable = (LPUART_CTRL_FEIE_MASK), /*!< Framing error flag. */ + kLPUART_ParityErrorInterruptEnable = (LPUART_CTRL_PEIE_MASK), /*!< Parity error flag. */ +#if defined(FSL_FEATURE_LPUART_HAS_FIFO) && FSL_FEATURE_LPUART_HAS_FIFO + kLPUART_TxFifoOverflowInterruptEnable = (LPUART_FIFO_TXOFE_MASK >> 8), /*!< Transmit FIFO Overflow. */ + kLPUART_RxFifoUnderflowInterruptEnable = (LPUART_FIFO_RXUFE_MASK >> 8), /*!< Receive FIFO Underflow. */ +#endif +}; + +/*! + * @brief LPUART status flags. + * + * This provides constants for the LPUART status flags for use in the LPUART functions. + */ +enum _lpuart_flags +{ + kLPUART_TxDataRegEmptyFlag = + (LPUART_STAT_TDRE_MASK), /*!< Transmit data register empty flag, sets when transmit buffer is empty */ + kLPUART_TransmissionCompleteFlag = + (LPUART_STAT_TC_MASK), /*!< Transmission complete flag, sets when transmission activity complete */ + kLPUART_RxDataRegFullFlag = + (LPUART_STAT_RDRF_MASK), /*!< Receive data register full flag, sets when the receive data buffer is full */ + kLPUART_IdleLineFlag = (LPUART_STAT_IDLE_MASK), /*!< Idle line detect flag, sets when idle line detected */ + kLPUART_RxOverrunFlag = (LPUART_STAT_OR_MASK), /*!< Receive Overrun, sets when new data is received before data is + read from receive register */ + kLPUART_NoiseErrorFlag = (LPUART_STAT_NF_MASK), /*!< Receive takes 3 samples of each received bit. If any of these + samples differ, noise flag sets */ + kLPUART_FramingErrorFlag = + (LPUART_STAT_FE_MASK), /*!< Frame error flag, sets if logic 0 was detected where stop bit expected */ + kLPUART_ParityErrorFlag = (LPUART_STAT_PF_MASK), /*!< If parity enabled, sets upon parity error detection */ +#if defined(FSL_FEATURE_LPUART_HAS_LIN_BREAK_DETECT) && FSL_FEATURE_LPUART_HAS_LIN_BREAK_DETECT + kLPUART_LinBreakFlag = (LPUART_STAT_LBKDIF_MASK), /*!< LIN break detect interrupt flag, sets when LIN break char + detected and LIN circuit enabled */ +#endif + kLPUART_RxActiveEdgeFlag = + (LPUART_STAT_RXEDGIF_MASK), /*!< Receive pin active edge interrupt flag, sets when active edge detected */ + kLPUART_RxActiveFlag = + (LPUART_STAT_RAF_MASK), /*!< Receiver Active Flag (RAF), sets at beginning of valid start bit */ +#if defined(FSL_FEATURE_LPUART_HAS_ADDRESS_MATCHING) && FSL_FEATURE_LPUART_HAS_ADDRESS_MATCHING + kLPUART_DataMatch1Flag = LPUART_STAT_MA1F_MASK, /*!< The next character to be read from LPUART_DATA matches MA1*/ + kLPUART_DataMatch2Flag = LPUART_STAT_MA2F_MASK, /*!< The next character to be read from LPUART_DATA matches MA2*/ +#endif +#if defined(FSL_FEATURE_LPUART_HAS_EXTENDED_DATA_REGISTER_FLAGS) && FSL_FEATURE_LPUART_HAS_EXTENDED_DATA_REGISTER_FLAGS + kLPUART_NoiseErrorInRxDataRegFlag = + (LPUART_DATA_NOISY_MASK >> 10), /*!< NOISY bit, sets if noise detected in current data word */ + kLPUART_ParityErrorInRxDataRegFlag = + (LPUART_DATA_PARITYE_MASK >> 10), /*!< PARITYE bit, sets if noise detected in current data word */ +#endif +#if defined(FSL_FEATURE_LPUART_HAS_FIFO) && FSL_FEATURE_LPUART_HAS_FIFO + kLPUART_TxFifoEmptyFlag = (LPUART_FIFO_TXEMPT_MASK >> 16), /*!< TXEMPT bit, sets if transmit buffer is empty */ + kLPUART_RxFifoEmptyFlag = (LPUART_FIFO_RXEMPT_MASK >> 16), /*!< RXEMPT bit, sets if receive buffer is empty */ + kLPUART_TxFifoOverflowFlag = + (LPUART_FIFO_TXOF_MASK >> 16), /*!< TXOF bit, sets if transmit buffer overflow occurred */ + kLPUART_RxFifoUnderflowFlag = + (LPUART_FIFO_RXUF_MASK >> 16), /*!< RXUF bit, sets if receive buffer underflow occurred */ +#endif +}; + +/*! @brief LPUART configuration structure. */ +typedef struct _lpuart_config +{ + uint32_t baudRate_Bps; /*!< LPUART baud rate */ + lpuart_parity_mode_t parityMode; /*!< Parity mode, disabled (default), even, odd */ + lpuart_data_bits_t dataBitsCount; /*!< Data bits count, eight (default), seven */ + bool isMsb; /*!< Data bits order, LSB (default), MSB */ +#if defined(FSL_FEATURE_LPUART_HAS_STOP_BIT_CONFIG_SUPPORT) && FSL_FEATURE_LPUART_HAS_STOP_BIT_CONFIG_SUPPORT + lpuart_stop_bit_count_t stopBitCount; /*!< Number of stop bits, 1 stop bit (default) or 2 stop bits */ +#endif +#if defined(FSL_FEATURE_LPUART_HAS_FIFO) && FSL_FEATURE_LPUART_HAS_FIFO + uint8_t txFifoWatermark; /*!< TX FIFO watermark */ + uint8_t rxFifoWatermark; /*!< RX FIFO watermark */ +#endif + bool enableTx; /*!< Enable TX */ + bool enableRx; /*!< Enable RX */ +} lpuart_config_t; + +/*! @brief LPUART transfer structure. */ +typedef struct _lpuart_transfer +{ + uint8_t *data; /*!< The buffer of data to be transfer.*/ + size_t dataSize; /*!< The byte count to be transfer. */ +} lpuart_transfer_t; + +/* Forward declaration of the handle typedef. */ +typedef struct _lpuart_handle lpuart_handle_t; + +/*! @brief LPUART transfer callback function. */ +typedef void (*lpuart_transfer_callback_t)(LPUART_Type *base, lpuart_handle_t *handle, status_t status, void *userData); + +/*! @brief LPUART handle structure. */ +struct _lpuart_handle +{ + uint8_t *volatile txData; /*!< Address of remaining data to send. */ + volatile size_t txDataSize; /*!< Size of the remaining data to send. */ + size_t txDataSizeAll; /*!< Size of the data to send out. */ + uint8_t *volatile rxData; /*!< Address of remaining data to receive. */ + volatile size_t rxDataSize; /*!< Size of the remaining data to receive. */ + size_t rxDataSizeAll; /*!< Size of the data to receive. */ + + uint8_t *rxRingBuffer; /*!< Start address of the receiver ring buffer. */ + size_t rxRingBufferSize; /*!< Size of the ring buffer. */ + volatile uint16_t rxRingBufferHead; /*!< Index for the driver to store received data into ring buffer. */ + volatile uint16_t rxRingBufferTail; /*!< Index for the user to get data from the ring buffer. */ + + lpuart_transfer_callback_t callback; /*!< Callback function. */ + void *userData; /*!< LPUART callback function parameter.*/ + + volatile uint8_t txState; /*!< TX transfer state. */ + volatile uint8_t rxState; /*!< RX transfer state. */ + +#if defined(FSL_FEATURE_LPUART_HAS_7BIT_DATA_SUPPORT) && FSL_FEATURE_LPUART_HAS_7BIT_DATA_SUPPORT + bool isSevenDataBits; /*!< Seven data bits flag. */ +#endif +}; + +/******************************************************************************* + * API + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* _cplusplus */ + +#if defined(FSL_FEATURE_LPUART_HAS_GLOBAL) && FSL_FEATURE_LPUART_HAS_GLOBAL + +/*! + * @name Software Reset + * @{ + */ + +/*! + * @brief Resets the LPUART using software. + * + * This function resets all internal logic and registers except the Global Register. + * Remains set until cleared by software. + * + * @param base LPUART peripheral base address. + */ +static inline void LPUART_SoftwareReset(LPUART_Type *base) +{ + base->GLOBAL |= LPUART_GLOBAL_RST_MASK; + base->GLOBAL &= ~LPUART_GLOBAL_RST_MASK; +} +/* @} */ +#endif /*FSL_FEATURE_LPUART_HAS_GLOBAL*/ + +/*! + * @name Initialization and deinitialization + * @{ + */ + +/*! + * @brief Initializes an LPUART instance with the user configuration structure and the peripheral clock. + * + * This function configures the LPUART module with user-defined settings. Call the LPUART_GetDefaultConfig() function + * to configure the configuration structure and get the default configuration. + * The example below shows how to use this API to configure the LPUART. + * @code + * lpuart_config_t lpuartConfig; + * lpuartConfig.baudRate_Bps = 115200U; + * lpuartConfig.parityMode = kLPUART_ParityDisabled; + * lpuartConfig.dataBitsCount = kLPUART_EightDataBits; + * lpuartConfig.isMsb = false; + * lpuartConfig.stopBitCount = kLPUART_OneStopBit; + * lpuartConfig.txFifoWatermark = 0; + * lpuartConfig.rxFifoWatermark = 1; + * LPUART_Init(LPUART1, &lpuartConfig, 20000000U); + * @endcode + * + * @param base LPUART peripheral base address. + * @param config Pointer to a user-defined configuration structure. + * @param srcClock_Hz LPUART clock source frequency in HZ. + * @retval kStatus_LPUART_BaudrateNotSupport Baudrate is not support in current clock source. + * @retval kStatus_Success LPUART initialize succeed + */ +status_t LPUART_Init(LPUART_Type *base, const lpuart_config_t *config, uint32_t srcClock_Hz); + +/*! + * @brief Deinitializes a LPUART instance. + * + * This function waits for transmit to complete, disables TX and RX, and disables the LPUART clock. + * + * @param base LPUART peripheral base address. + */ +void LPUART_Deinit(LPUART_Type *base); + +/*! + * @brief Gets the default configuration structure. + * + * This function initializes the LPUART configuration structure to a default value. The default + * values are: + * lpuartConfig->baudRate_Bps = 115200U; + * lpuartConfig->parityMode = kLPUART_ParityDisabled; + * lpuartConfig->dataBitsCount = kLPUART_EightDataBits; + * lpuartConfig->isMsb = false; + * lpuartConfig->stopBitCount = kLPUART_OneStopBit; + * lpuartConfig->txFifoWatermark = 0; + * lpuartConfig->rxFifoWatermark = 1; + * lpuartConfig->enableTx = false; + * lpuartConfig->enableRx = false; + * + * @param config Pointer to a configuration structure. + */ +void LPUART_GetDefaultConfig(lpuart_config_t *config); + +/*! + * @brief Sets the LPUART instance baudrate. + * + * This function configures the LPUART module baudrate. This function is used to update + * the LPUART module baudrate after the LPUART module is initialized by the LPUART_Init. + * @code + * LPUART_SetBaudRate(LPUART1, 115200U, 20000000U); + * @endcode + * + * @param base LPUART peripheral base address. + * @param baudRate_Bps LPUART baudrate to be set. + * @param srcClock_Hz LPUART clock source frequency in HZ. + * @retval kStatus_LPUART_BaudrateNotSupport Baudrate is not supported in the current clock source. + * @retval kStatus_Success Set baudrate succeeded. + */ +status_t LPUART_SetBaudRate(LPUART_Type *base, uint32_t baudRate_Bps, uint32_t srcClock_Hz); + +/* @} */ + +/*! + * @name Status + * @{ + */ + +/*! + * @brief Gets LPUART status flags. + * + * This function gets all LPUART status flags. The flags are returned as the logical + * OR value of the enumerators @ref _lpuart_flags. To check for a specific status, + * compare the return value with enumerators in the @ref _lpuart_flags. + * For example, to check whether the TX is empty: + * @code + * if (kLPUART_TxDataRegEmptyFlag & LPUART_GetStatusFlags(LPUART1)) + * { + * ... + * } + * @endcode + * + * @param base LPUART peripheral base address. + * @return LPUART status flags which are ORed by the enumerators in the _lpuart_flags. + */ +uint32_t LPUART_GetStatusFlags(LPUART_Type *base); + +/*! + * @brief Clears status flags with a provided mask. + * + * This function clears LPUART status flags with a provided mask. Automatically cleared flags + * can't be cleared by this function. + * Flags that can only cleared or set by hardware are: + * kLPUART_TxDataRegEmptyFlag, kLPUART_TransmissionCompleteFlag, kLPUART_RxDataRegFullFlag, + * kLPUART_RxActiveFlag, kLPUART_NoiseErrorInRxDataRegFlag, kLPUART_ParityErrorInRxDataRegFlag, + * kLPUART_TxFifoEmptyFlag,kLPUART_RxFifoEmptyFlag + * Note: This API should be called when the Tx/Rx is idle, otherwise it takes no effects. + * + * @param base LPUART peripheral base address. + * @param mask the status flags to be cleared. The user can use the enumerators in the + * _lpuart_status_flag_t to do the OR operation and get the mask. + * @return 0 succeed, others failed. + * @retval kStatus_LPUART_FlagCannotClearManually The flag can't be cleared by this function but + * it is cleared automatically by hardware. + * @retval kStatus_Success Status in the mask are cleared. + */ +status_t LPUART_ClearStatusFlags(LPUART_Type *base, uint32_t mask); + +/* @} */ + +/*! + * @name Interrupts + * @{ + */ + +/*! + * @brief Enables LPUART interrupts according to a provided mask. + * + * This function enables the LPUART interrupts according to a provided mask. The mask + * is a logical OR of enumeration members. See the @ref _lpuart_interrupt_enable. + * This examples shows how to enable TX empty interrupt and RX full interrupt: + * @code + * LPUART_EnableInterrupts(LPUART1,kLPUART_TxDataRegEmptyInterruptEnable | kLPUART_RxDataRegFullInterruptEnable); + * @endcode + * + * @param base LPUART peripheral base address. + * @param mask The interrupts to enable. Logical OR of @ref _uart_interrupt_enable. + */ +void LPUART_EnableInterrupts(LPUART_Type *base, uint32_t mask); + +/*! + * @brief Disables LPUART interrupts according to a provided mask. + * + * This function disables the LPUART interrupts according to a provided mask. The mask + * is a logical OR of enumeration members. See @ref _lpuart_interrupt_enable. + * This example shows how to disable the TX empty interrupt and RX full interrupt: + * @code + * LPUART_DisableInterrupts(LPUART1,kLPUART_TxDataRegEmptyInterruptEnable | kLPUART_RxDataRegFullInterruptEnable); + * @endcode + * + * @param base LPUART peripheral base address. + * @param mask The interrupts to disable. Logical OR of @ref _lpuart_interrupt_enable. + */ +void LPUART_DisableInterrupts(LPUART_Type *base, uint32_t mask); + +/*! + * @brief Gets enabled LPUART interrupts. + * + * This function gets the enabled LPUART interrupts. The enabled interrupts are returned + * as the logical OR value of the enumerators @ref _lpuart_interrupt_enable. To check + * a specific interrupt enable status, compare the return value with enumerators + * in @ref _lpuart_interrupt_enable. + * For example, to check whether the TX empty interrupt is enabled: + * @code + * uint32_t enabledInterrupts = LPUART_GetEnabledInterrupts(LPUART1); + * + * if (kLPUART_TxDataRegEmptyInterruptEnable & enabledInterrupts) + * { + * ... + * } + * @endcode + * + * @param base LPUART peripheral base address. + * @return LPUART interrupt flags which are logical OR of the enumerators in @ref _lpuart_interrupt_enable. + */ +uint32_t LPUART_GetEnabledInterrupts(LPUART_Type *base); + +#if defined(FSL_FEATURE_LPUART_HAS_DMA_ENABLE) && FSL_FEATURE_LPUART_HAS_DMA_ENABLE +/*! + * @brief Gets the LPUART data register address. + * + * This function returns the LPUART data register address, which is mainly used by the DMA/eDMA. + * + * @param base LPUART peripheral base address. + * @return LPUART data register addresses which are used both by the transmitter and receiver. + */ +static inline uint32_t LPUART_GetDataRegisterAddress(LPUART_Type *base) +{ + return (uint32_t) & (base->DATA); +} + +/*! + * @brief Enables or disables the LPUART transmitter DMA request. + * + * This function enables or disables the transmit data register empty flag, STAT[TDRE], to generate DMA requests. + * + * @param base LPUART peripheral base address. + * @param enable True to enable, false to disable. + */ +static inline void LPUART_EnableTxDMA(LPUART_Type *base, bool enable) +{ + if (enable) + { + base->BAUD |= LPUART_BAUD_TDMAE_MASK; + base->CTRL |= LPUART_CTRL_TIE_MASK; + } + else + { + base->BAUD &= ~LPUART_BAUD_TDMAE_MASK; + base->CTRL &= ~LPUART_CTRL_TIE_MASK; + } +} + +/*! + * @brief Enables or disables the LPUART receiver DMA. + * + * This function enables or disables the receiver data register full flag, STAT[RDRF], to generate DMA requests. + * + * @param base LPUART peripheral base address. + * @param enable True to enable, false to disable. + */ +static inline void LPUART_EnableRxDMA(LPUART_Type *base, bool enable) +{ + if (enable) + { + base->BAUD |= LPUART_BAUD_RDMAE_MASK; + base->CTRL |= LPUART_CTRL_RIE_MASK; + } + else + { + base->BAUD &= ~LPUART_BAUD_RDMAE_MASK; + base->CTRL &= ~LPUART_CTRL_RIE_MASK; + } +} + +/* @} */ +#endif /* FSL_FEATURE_LPUART_HAS_DMA_ENABLE */ + +/*! + * @name Bus Operations + * @{ + */ + +/*! + * @brief Enables or disables the LPUART transmitter. + * + * This function enables or disables the LPUART transmitter. + * + * @param base LPUART peripheral base address. + * @param enable True to enable, false to disable. + */ +static inline void LPUART_EnableTx(LPUART_Type *base, bool enable) +{ + if (enable) + { + base->CTRL |= LPUART_CTRL_TE_MASK; + } + else + { + base->CTRL &= ~LPUART_CTRL_TE_MASK; + } +} + +/*! + * @brief Enables or disables the LPUART receiver. + * + * This function enables or disables the LPUART receiver. + * + * @param base LPUART peripheral base address. + * @param enable True to enable, false to disable. + */ +static inline void LPUART_EnableRx(LPUART_Type *base, bool enable) +{ + if (enable) + { + base->CTRL |= LPUART_CTRL_RE_MASK; + } + else + { + base->CTRL &= ~LPUART_CTRL_RE_MASK; + } +} + +/*! + * @brief Writes to the transmitter register. + * + * This function writes data to the transmitter register directly. The upper layer must + * ensure that the TX register is empty or that the TX FIFO has room before calling this function. + * + * @param base LPUART peripheral base address. + * @param data Data write to the TX register. + */ +static inline void LPUART_WriteByte(LPUART_Type *base, uint8_t data) +{ + base->DATA = data; +} + +/*! + * @brief Reads the receiver register. + * + * This function reads data from the receiver register directly. The upper layer must + * ensure that the receiver register is full or that the RX FIFO has data before calling this function. + * + * @param base LPUART peripheral base address. + * @return Data read from data register. + */ +static inline uint8_t LPUART_ReadByte(LPUART_Type *base) +{ +#if defined(FSL_FEATURE_LPUART_HAS_7BIT_DATA_SUPPORT) && FSL_FEATURE_LPUART_HAS_7BIT_DATA_SUPPORT + uint32_t ctrl = base->CTRL; + bool isSevenDataBits = + ((ctrl & LPUART_CTRL_M7_MASK) || + ((!(ctrl & LPUART_CTRL_M7_MASK)) && (!(ctrl & LPUART_CTRL_M_MASK)) && (ctrl & LPUART_CTRL_PE_MASK))); + + if (isSevenDataBits) + { + return (base->DATA & 0x7F); + } + else + { + return base->DATA; + } +#else + return base->DATA; +#endif +} + +/*! + * @brief Writes to the transmitter register using a blocking method. + * + * This function polls the transmitter register, waits for the register to be empty or for TX FIFO to have + * room, and writes data to the transmitter buffer. + * + * @note This function does not check whether all data has been sent out to the bus. + * Before disabling the transmitter, check the kLPUART_TransmissionCompleteFlag to ensure that the transmit is + * finished. + * + * @param base LPUART peripheral base address. + * @param data Start address of the data to write. + * @param length Size of the data to write. + */ +void LPUART_WriteBlocking(LPUART_Type *base, const uint8_t *data, size_t length); + +/*! +* @brief Reads the receiver data register using a blocking method. + * + * This function polls the receiver register, waits for the receiver register full or receiver FIFO + * has data, and reads data from the TX register. + * + * @param base LPUART peripheral base address. + * @param data Start address of the buffer to store the received data. + * @param length Size of the buffer. + * @retval kStatus_LPUART_RxHardwareOverrun Receiver overrun happened while receiving data. + * @retval kStatus_LPUART_NoiseError Noise error happened while receiving data. + * @retval kStatus_LPUART_FramingError Framing error happened while receiving data. + * @retval kStatus_LPUART_ParityError Parity error happened while receiving data. + * @retval kStatus_Success Successfully received all data. + */ +status_t LPUART_ReadBlocking(LPUART_Type *base, uint8_t *data, size_t length); + +/* @} */ + +/*! + * @name Transactional + * @{ + */ + +/*! + * @brief Initializes the LPUART handle. + * + * This function initializes the LPUART handle, which can be used for other LPUART + * transactional APIs. Usually, for a specified LPUART instance, + * call this API once to get the initialized handle. + * + * The LPUART driver supports the "background" receiving, which means that user can set up + * an RX ring buffer optionally. Data received is stored into the ring buffer even when the + * user doesn't call the LPUART_TransferReceiveNonBlocking() API. If there is already data received + * in the ring buffer, the user can get the received data from the ring buffer directly. + * The ring buffer is disabled if passing NULL as @p ringBuffer. + * + * @param base LPUART peripheral base address. + * @param handle LPUART handle pointer. + * @param callback Callback function. + * @param userData User data. + */ +void LPUART_TransferCreateHandle(LPUART_Type *base, + lpuart_handle_t *handle, + lpuart_transfer_callback_t callback, + void *userData); +/*! + * @brief Transmits a buffer of data using the interrupt method. + * + * This function send data using an interrupt method. This is a non-blocking function, which + * returns directly without waiting for all data written to the transmitter register. When + * all data is written to the TX register in the ISR, the LPUART driver calls the callback + * function and passes the @ref kStatus_LPUART_TxIdle as status parameter. + * + * @note The kStatus_LPUART_TxIdle is passed to the upper layer when all data are written + * to the TX register. However, there is no check to ensure that all the data sent out. Before disabling the TX, + * check the kLPUART_TransmissionCompleteFlag to ensure that the transmit is finished. + * + * @param base LPUART peripheral base address. + * @param handle LPUART handle pointer. + * @param xfer LPUART transfer structure, see #lpuart_transfer_t. + * @retval kStatus_Success Successfully start the data transmission. + * @retval kStatus_LPUART_TxBusy Previous transmission still not finished, data not all written to the TX register. + * @retval kStatus_InvalidArgument Invalid argument. + */ +status_t LPUART_TransferSendNonBlocking(LPUART_Type *base, lpuart_handle_t *handle, lpuart_transfer_t *xfer); + +/*! + * @brief Sets up the RX ring buffer. + * + * This function sets up the RX ring buffer to a specific UART handle. + * + * When the RX ring buffer is used, data received is stored into the ring buffer even when + * the user doesn't call the UART_TransferReceiveNonBlocking() API. If there is already data received + * in the ring buffer, the user can get the received data from the ring buffer directly. + * + * @note When using RX ring buffer, one byte is reserved for internal use. In other + * words, if @p ringBufferSize is 32, then only 31 bytes are used for saving data. + * + * @param base LPUART peripheral base address. + * @param handle LPUART handle pointer. + * @param ringBuffer Start address of ring buffer for background receiving. Pass NULL to disable the ring buffer. + * @param ringBufferSize size of the ring buffer. + */ +void LPUART_TransferStartRingBuffer(LPUART_Type *base, + lpuart_handle_t *handle, + uint8_t *ringBuffer, + size_t ringBufferSize); + +/*! + * @brief Aborts the background transfer and uninstalls the ring buffer. + * + * This function aborts the background transfer and uninstalls the ring buffer. + * + * @param base LPUART peripheral base address. + * @param handle LPUART handle pointer. + */ +void LPUART_TransferStopRingBuffer(LPUART_Type *base, lpuart_handle_t *handle); + +/*! + * @brief Aborts the interrupt-driven data transmit. + * + * This function aborts the interrupt driven data sending. The user can get the remainBtyes to find out + * how many bytes are not sent out. + * + * @param base LPUART peripheral base address. + * @param handle LPUART handle pointer. + */ +void LPUART_TransferAbortSend(LPUART_Type *base, lpuart_handle_t *handle); + +/*! + * @brief Gets the number of bytes that have been written to the LPUART transmitter register. + * + * This function gets the number of bytes that have been written to LPUART TX + * register by an interrupt method. + * + * @param base LPUART peripheral base address. + * @param handle LPUART handle pointer. + * @param count Send bytes count. + * @retval kStatus_NoTransferInProgress No send in progress. + * @retval kStatus_InvalidArgument Parameter is invalid. + * @retval kStatus_Success Get successfully through the parameter \p count; + */ +status_t LPUART_TransferGetSendCount(LPUART_Type *base, lpuart_handle_t *handle, uint32_t *count); + +/*! + * @brief Receives a buffer of data using the interrupt method. + * + * This function receives data using an interrupt method. This is a non-blocking function + * which returns without waiting to ensure that all data are received. + * If the RX ring buffer is used and not empty, the data in the ring buffer is copied and + * the parameter @p receivedBytes shows how many bytes are copied from the ring buffer. + * After copying, if the data in the ring buffer is not enough for read, the receive + * request is saved by the LPUART driver. When the new data arrives, the receive request + * is serviced first. When all data is received, the LPUART driver notifies the upper layer + * through a callback function and passes a status parameter @ref kStatus_UART_RxIdle. + * For example, the upper layer needs 10 bytes but there are only 5 bytes in ring buffer. + * The 5 bytes are copied to xfer->data, which returns with the + * parameter @p receivedBytes set to 5. For the remaining 5 bytes, the newly arrived data is + * saved from xfer->data[5]. When 5 bytes are received, the LPUART driver notifies the upper layer. + * If the RX ring buffer is not enabled, this function enables the RX and RX interrupt + * to receive data to xfer->data. When all data is received, the upper layer is notified. + * + * @param base LPUART peripheral base address. + * @param handle LPUART handle pointer. + * @param xfer LPUART transfer structure, see #uart_transfer_t. + * @param receivedBytes Bytes received from the ring buffer directly. + * @retval kStatus_Success Successfully queue the transfer into the transmit queue. + * @retval kStatus_LPUART_RxBusy Previous receive request is not finished. + * @retval kStatus_InvalidArgument Invalid argument. + */ +status_t LPUART_TransferReceiveNonBlocking(LPUART_Type *base, + lpuart_handle_t *handle, + lpuart_transfer_t *xfer, + size_t *receivedBytes); + +/*! + * @brief Aborts the interrupt-driven data receiving. + * + * This function aborts the interrupt-driven data receiving. The user can get the remainBytes to find out + * how many bytes not received yet. + * + * @param base LPUART peripheral base address. + * @param handle LPUART handle pointer. + */ +void LPUART_TransferAbortReceive(LPUART_Type *base, lpuart_handle_t *handle); + +/*! + * @brief Gets the number of bytes that have been received. + * + * This function gets the number of bytes that have been received. + * + * @param base LPUART peripheral base address. + * @param handle LPUART handle pointer. + * @param count Receive bytes count. + * @retval kStatus_NoTransferInProgress No receive in progress. + * @retval kStatus_InvalidArgument Parameter is invalid. + * @retval kStatus_Success Get successfully through the parameter \p count; + */ +status_t LPUART_TransferGetReceiveCount(LPUART_Type *base, lpuart_handle_t *handle, uint32_t *count); + +/*! + * @brief LPUART IRQ handle function. + * + * This function handles the LPUART transmit and receive IRQ request. + * + * @param base LPUART peripheral base address. + * @param handle LPUART handle pointer. + */ +void LPUART_TransferHandleIRQ(LPUART_Type *base, lpuart_handle_t *handle); + +/*! + * @brief LPUART Error IRQ handle function. + * + * This function handles the LPUART error IRQ request. + * + * @param base LPUART peripheral base address. + * @param handle LPUART handle pointer. + */ +void LPUART_TransferHandleErrorIRQ(LPUART_Type *base, lpuart_handle_t *handle); + +/* @} */ + +#if defined(__cplusplus) +} +#endif + +/*! @}*/ + +#endif /* _FSL_LPUART_H_ */