![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
Diff: mbed-os/targets/TARGET_Freescale/TARGET_K20XX/spi_api.c
- Revision:
- 0:8fdf9a60065b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-os/targets/TARGET_Freescale/TARGET_K20XX/spi_api.c Wed Oct 10 00:33:53 2018 +0000 @@ -0,0 +1,169 @@ +/* mbed Microcontroller Library + * Copyright (c) 2015 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include "mbed_assert.h" +#include "spi_api.h" + +#include <math.h> + +#include "cmsis.h" +#include "pinmap.h" +#include "clk_freqs.h" +#include "PeripheralPins.h" + +void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel) { + // determine the SPI to use + SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI); + SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO); + SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK); + SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL); + SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso); + SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel); + + obj->spi = (SPI_Type*)pinmap_merge(spi_data, spi_cntl); + MBED_ASSERT((int)obj->spi != NC); + + SIM->SCGC5 |= SIM_SCGC5_PORTC_MASK | SIM_SCGC5_PORTD_MASK; + SIM->SCGC6 |= SIM_SCGC6_SPI0_MASK; + + obj->spi->MCR &= ~(SPI_MCR_MDIS_MASK | SPI_MCR_HALT_MASK); + //obj->spi->MCR |= SPI_MCR_DIS_RXF_MASK | SPI_MCR_DIS_TXF_MASK; + + // not halt in the debug mode + obj->spi->SR |= SPI_SR_EOQF_MASK; + + // pin out the spi pins + pinmap_pinout(mosi, PinMap_SPI_MOSI); + pinmap_pinout(miso, PinMap_SPI_MISO); + pinmap_pinout(sclk, PinMap_SPI_SCLK); + if (ssel != NC) { + pinmap_pinout(ssel, PinMap_SPI_SSEL); + } +} + +void spi_free(spi_t *obj) { + // [TODO] +} +void spi_format(spi_t *obj, int bits, int mode, int slave) { + MBED_ASSERT((bits > 4) || (bits < 16)); + MBED_ASSERT((mode >= 0) && (mode <= 3)); + + uint8_t polarity = (mode & 0x2) ? 1 : 0; + uint8_t phase = (mode & 0x1) ? 1 : 0; + uint8_t old_polarity = (obj->spi->CTAR[0] & SPI_CTAR_CPOL_MASK) != 0; + + // set master/slave + if (slave) { + obj->spi->MCR &= ~SPI_MCR_MSTR_MASK; + } else { + obj->spi->MCR |= (1UL << SPI_MCR_MSTR_SHIFT); + } + + // CTAR0 is used + obj->spi->CTAR[0] &= ~(SPI_CTAR_CPHA_MASK | SPI_CTAR_CPOL_MASK | SPI_CTAR_FMSZ_MASK); + obj->spi->CTAR[0] |= (polarity << SPI_CTAR_CPOL_SHIFT) | (phase << SPI_CTAR_CPHA_SHIFT) | ((bits - 1) << SPI_CTAR_FMSZ_SHIFT); + + //If clk idle state was changed, start a dummy transmission + //This is a 'feature' in DSPI: https://community.freescale.com/thread/105526 + if ((old_polarity != polarity) && (slave == 0)) { + //Start transfer (CS should be high, so shouldn't matter) + spi_master_write(obj, 0xFFFF); + } +} + +static const uint8_t baudrate_prescaler[] = {2,3,5,7}; +static const uint16_t baudrate_scaler[] = {2,4,6,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768}; + +void spi_frequency(spi_t *obj, int hz) { + uint32_t f_error = 0; + uint32_t p_error = 0xffffffff; + uint32_t ref = 0; + uint32_t br = 0; + uint32_t ref_spr = 0; + uint32_t ref_prescaler = 0; + uint32_t ref_dr = 0; + + // bus clk + uint32_t PCLK = bus_frequency(); + + for (uint32_t i = 0; i < 4; i++) { + for (br = 0; br <= 15; br++) { + for (uint32_t dr = 0; dr < 2; dr++) { + ref = (PCLK * (1U + dr) / baudrate_prescaler[i]) / baudrate_scaler[br]; + if (ref > (uint32_t)hz) + continue; + f_error = hz - ref; + if (f_error < p_error) { + ref_spr = br; + ref_prescaler = i; + ref_dr = dr; + p_error = f_error; + } + } + } + } + + // set PBR and BR + obj->spi->CTAR[0] &= ~(SPI_CTAR_PBR_MASK | SPI_CTAR_BR_MASK | SPI_CTAR_DBR_MASK); + obj->spi->CTAR[0] |= (ref_prescaler << SPI_CTAR_PBR_SHIFT) | (ref_spr << SPI_CTAR_BR_SHIFT) | (ref_dr << SPI_CTAR_DBR_SHIFT); +} + +static inline int spi_writeable(spi_t *obj) { + return (obj->spi->SR & SPI_SR_TFFF_MASK) ? 1 : 0; +} + +static inline int spi_readable(spi_t *obj) { + return (obj->spi->SR & SPI_SR_RFDF_MASK) ? 1 : 0; +} + +int spi_master_write(spi_t *obj, int value) { + //clear RX buffer flag + obj->spi->SR |= SPI_SR_RFDF_MASK; + // wait tx buffer empty + while(!spi_writeable(obj)); + obj->spi->PUSHR = SPI_PUSHR_TXDATA(value & 0xffff) /*| SPI_PUSHR_EOQ_MASK*/; + + // wait rx buffer full + while (!spi_readable(obj)); + return obj->spi->POPR; +} + +int spi_master_block_write(spi_t *obj, const char *tx_buffer, int tx_length, + char *rx_buffer, int rx_length, char write_fill) { + int total = (tx_length > rx_length) ? tx_length : rx_length; + + for (int i = 0; i < total; i++) { + char out = (i < tx_length) ? tx_buffer[i] : write_fill; + char in = spi_master_write(obj, out); + if (i < rx_length) { + rx_buffer[i] = in; + } + } + + return total; +} + +int spi_slave_receive(spi_t *obj) { + return spi_readable(obj); +} + +int spi_slave_read(spi_t *obj) { + obj->spi->SR |= SPI_SR_RFDF_MASK; + return obj->spi->POPR; +} + +void spi_slave_write(spi_t *obj, int value) { + while (!spi_writeable(obj)); +}