![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
Diff: mbed-os/targets/TARGET_Atmel/TARGET_SAM_CortexM4/gpio_api.c
- Revision:
- 0:8fdf9a60065b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-os/targets/TARGET_Atmel/TARGET_SAM_CortexM4/gpio_api.c Wed Oct 10 00:33:53 2018 +0000 @@ -0,0 +1,77 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2015 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include "mbed_assert.h" +#include "PinNames.h" +#include "gpio_object.h" +#include "gpio_api.h" +#include "compiler.h" +#include "ioport.h" + +extern uint8_t g_sys_init; + +uint32_t gpio_set(PinName pin) +{ + MBED_ASSERT(pin != (PinName)NC); + return (1UL << (pin % 32)); +} + +void gpio_init(gpio_t *obj, PinName pin) +{ + MBED_ASSERT(pin != (PinName)NC); + if (g_sys_init == 0) { + sysclk_init(); + system_board_init(); + g_sys_init = 1; + } + obj->pin = pin; + + ioport_set_pin_dir(pin, IOPORT_DIR_INPUT); + ioport_set_pin_mode(pin, IOPORT_MODE_PULLUP); +} + +void gpio_mode(gpio_t *obj, PinMode mode) +{ + MBED_ASSERT(obj->pin != (PinName)NC); + obj->mode = mode; + switch (mode) { + case PullNone : + ioport_set_pin_mode(obj->pin, IOPORT_MODE_OPEN_DRAIN); + break; + case PullUp: + ioport_set_pin_mode(obj->pin, IOPORT_MODE_PULLUP); + break; + case PullDown: + ioport_set_pin_mode(obj->pin, IOPORT_MODE_PULLDOWN); + break; + } +} + +void gpio_dir(gpio_t *obj, PinDirection direction) +{ + MBED_ASSERT(obj->pin != (PinName)NC); + obj->direction = direction; + switch (direction) { + case PIN_INPUT : + ioport_set_pin_dir(obj->pin, IOPORT_DIR_INPUT); + break; + case PIN_OUTPUT: + ioport_set_pin_dir(obj->pin, IOPORT_DIR_OUTPUT); + break; + case PIN_INPUT_OUTPUT: + ioport_set_pin_dir(obj->pin, IOPORT_DIR_OUTPUT); + break; + } +}