Diff: mbed-os/targets/TARGET_ARM_SSG/TARGET_IOTSS/us_ticker.c

Revision:

0:8fdf9a60065b

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os/targets/TARGET_ARM_SSG/TARGET_IOTSS/us_ticker.c	Wed Oct 10 00:33:53 2018 +0000
@@ -0,0 +1,94 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <stddef.h>
+#include "us_ticker_api.h"
+#include "PeripheralNames.h"
+
+#define US_TICKER_TIMER1      CMSDK_DUALTIMER1
+#define US_TICKER_TIMER2      CMSDK_DUALTIMER2
+#define US_TICKER_TIMER_IRQn  DUALTIMER_IRQn
+
+int us_ticker_inited = 0;
+
+void us_ticker_init(void) {
+    if (us_ticker_inited) return;
+    us_ticker_inited = 1;
+    
+    US_TICKER_TIMER1->TimerControl = 0x0; // disable timer
+    US_TICKER_TIMER2->TimerControl = 0x00; // disable timer
+    US_TICKER_TIMER1->TimerLoad = 0xFFFFFFFF;
+    US_TICKER_TIMER2->TimerLoad = 0xFFFFFFFF;
+    
+    US_TICKER_TIMER1->TimerControl = 0x62; // enable interrupt and set to 32 bit counter and set to periodic mode
+    US_TICKER_TIMER2->TimerControl = 0x42; // enable interrupt and set to 32 bit counter
+    
+    US_TICKER_TIMER1->TimerControl |= 0x80; // enable counter
+    US_TICKER_TIMER2->TimerControl |= 0x80; // enable counter
+    
+    NVIC_SetVector(US_TICKER_TIMER_IRQn, (uint32_t)us_ticker_irq_handler);
+    NVIC_EnableIRQ(US_TICKER_TIMER_IRQn);
+}
+
+uint32_t us_ticker_read() {
+    uint32_t return_value = 0;
+
+    if (!us_ticker_inited)
+        us_ticker_init();
+    return_value = ((~US_TICKER_TIMER2->TimerValue)/24);
+    return return_value;
+}
+
+void us_ticker_set_interrupt(timestamp_t timestamp) {
+    int delta = 0;
+
+    if (!us_ticker_inited)
+        us_ticker_init();
+    delta = (int)(timestamp - us_ticker_read());
+    if (delta <= 0) {
+        // This event was in the past:
+        us_ticker_irq_handler();
+        return;
+    }
+    // enable interrupt
+    US_TICKER_TIMER1->TimerControl = 0x0; // disable timer
+    US_TICKER_TIMER1->TimerControl = 0x62; // enable interrupt and set to 32 bit counter and set to periodic mode
+    US_TICKER_TIMER1->TimerLoad = (delta)*24; //initialise the timer value
+    US_TICKER_TIMER1->TimerControl |= 0x80; //enable timer
+}
+
+void us_ticker_fire_interrupt(void)
+{
+    NVIC_SetPendingIRQ(US_TICKER_TIMER_IRQn);
+}
+
+void us_ticker_disable_interrupt(void) {
+    
+    US_TICKER_TIMER1->TimerControl &= 0xDF;
+    US_TICKER_TIMER2->TimerControl &= 0xDF;
+
+}
+
+void us_ticker_clear_interrupt(void) {
+
+    US_TICKER_TIMER1->TimerIntClr = 0x1;
+    US_TICKER_TIMER2->TimerIntClr = 0x1;
+
+}
+
+void us_ticker_free(void)
+{
+
+}