Diff: BMP280.h

Revision:

9:256989faeb3b

Parent:

6:b2672da545f1

diff -r fa5cc1397510 -r 256989faeb3b BMP280.h
--- a/BMP280.h	Thu Apr 09 03:18:31 2020 +0000
+++ b/BMP280.h	Fri Apr 10 11:56:58 2020 +0000
@@ -14,14 +14,14 @@
 #pragma once
 #ifndef BME280MbedDecl
 #define BME280MbedDecl
-
+ 
 #include <mbedBug.h>
-
+ 
 //#define _DEBUG
-// default address with SDO High 0x77
-// address with SDO LOW 0x76
+// default BusAddress with SDO High 0x77
+// BusAddress with SDO LOW 0x76
 #define BMP280SlaveAddressDefault (0x77)
-
+ 
  
 /** A BME280 environmental sensor
 A library to read environmental temperature and pressure using Bosch BME280. */
@@ -30,44 +30,35 @@
   public:
   
     enum {
-      // The default I2C slave address.
+      // The default I2C slave BusAddress.
       SlaveAddress = BMP280SlaveAddressDefault
     };
-
-    /* Creates a BME280 instance connected to specified I2C pins and address.
-    @param SDA I2C-bus SDA pin
-    @param SCL I2C-bus SCL pin
-    @param SlaveAddress (option) I2C-bus address (default: 0x77) */
-    BMP280(PinName SDA, PinName SCK, 
-           char SlaveAddress = BMP280SlaveAddressDefault);
-
-    /* Creates a BME280 instance connected to the I2C pins and address.
+ 
+    /* Creates a BME280 instance connected to the I2C pins and BusAddress.
      *
      * @param i2c_obj I2C object (instance)
-     * @param SlaveAddress (option) I2C-bus address (default: 0x77)
+     * @param SlaveAddress (option) I2C-bus BusAddress (default: 0x77)
      */
     BMP280(I2C &Bus, char SlaveAddress = BMP280SlaveAddressDefault);
-
-    ~BMP280();
-
+ 
     /* Initializa BME280 sensor
     Configure sensor setting and read parameters for calibration */
     void Initialize();
-
+ 
     /* Read the current temperature value (degree Celsius) from BME280 sensor */
-    float Temperature();
-
+    int32_t Temperature();
+ 
     /* Read the current pressure value (hectopascal)from BME280 sensor */
-    float Pressure();
-
+    uint32_t Pressure();
+ 
     /* Read the current humidity value (humidity %) from BME280 sensor */
     //float HumidityGet();
-
+ 
 private:
-
+ 
     I2C         *i2c_p;
-    I2C         &i2c;
-    char        address;
+    I2C         &Bus;
+    char        BusAddress;
     uint16_t    dig_T1;
     int16_t     dig_T2, dig_T3;
     uint16_t    dig_P1;
@@ -75,8 +66,9 @@
     uint16_t    dig_H1, dig_H3;
     int16_t     dig_H2, dig_H4, dig_H5, dig_H6;
     int32_t     t_fine;
-
+ 
 };
-
+ 
 #undef SlaveAddressDefault
 #endif
+ 
\ No newline at end of file