Diff: GHVentilatorTargetMbed.hpp

Revision:

10:09fe2b1474bf

Parent:

9:256989faeb3b

diff -r 256989faeb3b -r 09fe2b1474bf GHVentilatorTargetMbed.hpp
--- a/GHVentilatorTargetMbed.hpp	Fri Apr 10 11:56:58 2020 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,183 +0,0 @@
-/** Gravity Hookah Ventilator @version 0.x
-@link    https://github.com/KabukiStarship/SickBay.git
-@file    /TargetMbed.cpp
-@author  Cale McCollough <https://cale-mccollough.github.io>
-@license Copyright 2020 (C) Kabuki Starship <kabukistarship.com>.
-This Source Code Form is subject to the terms of the Mozilla Public License, 
-v. 2.0. If a copy of the MPL was not distributed with this file, you can obtain 
-one at <https://mozilla.org/MPL/2.0/>. */
-#pragma once
-#ifndef GHVentilatorTargetMbed
-#define GHVentilatorTargetMbed
-
-#define SickBayDebug 1
-#define Platform PlatformMbed
-#define GHVentilatorChannelCount 4
-
-// Define LLLow and LLHigh before you #include "GHVentilator.hpp"
-enum {
-  LLHigh = 1, //< Logic-level High.
-  LLLow  = 0, //< Logic-level Low.
-};
-
-#include "GHVentilator.hpp"
-#include "BMP280.hpp"
-
-namespace SickBay {
- 
-
-DigitalOut Blower(D2),
-           Status(D3),
-           Channel1Valve (D4);
-DigitalIn ChannelFlowSensor (D5);
-DigitalOut Channel2Valve (D6);
-DigitalIn Channel2FlowSensor (D7);
-DigitalOut Channel3Valve (D8);
-DigitalIn Channel3FlowSensor (D9);
-DigitalOut Channel4Valve (D10);
-DigitalIn Channel4FlowSensor (D11);
-
-void GHVentilator::BlowerTurnOff() {
-  Blower = LLLow;
-}
-
-void GHVentilator::BlowerTurnOn() {
-  Blower = LLHigh;
-}
-
-bool GHVentilator::IsOverPressure () { return Pressure > PressureMax; }
-
-bool GHVentilator::IsUnderPressure () { return Pressure < PressureMax; }
-
-void GHVentilator::Channel1ValveSet (int Value) {
-  Channel1Valve = Value;
-}
-
-void GHVentilator::Channel2ValveSet (int Value) {
-  Channel2Valve = Value;
-}
-void GHVentilator::Channel3ValveSet (int Value) {
-  Channel3Valve = Value;
-}
-void GHVentilator::Channel4ValveSet (int Value) {
-  Channel4Valve = Value;
-}
-#if GHVentilatorChannelCount >= 2
-#endif
-#if GHVentilatorChannelCount >= 3
-#endif
-#if GHVentilatorChannelCount >= 4
-#endif
-
-void GHVentilator::Run(){
-  DPrintIndent (100, "Starting GHVentilator...\r\n\r\n");
-  
-  enum {
-    TicksSecond = 250,
-    TicksCalibrate = TicksSecond * 10, //< Calibrate for 10 seconds.
-  };
-  float ChamberPressureHysteresis = 1.25f, //< +/-25% goes up and down half-way.
-        PatientPressureHysteresis = 1.01f; //< + 1% over 1 atmosphere.
-  
-  I2C Bus(A4, A5);
-  int BusAddress = BMP280SlaveAddressDefault;
-  
-   // Pressure sensor for the air tank.
-  BMP280 AtmosphereChamber(Bus, BusAddress);
-  Pressure = AtmosphereChamber.Pressure ();
-  Temperature = AtmosphereChamber.Temperature ();
-  // Atmoshperic sensor to Patient 1.
-  BMP280 Channel1Atmosphere(Bus, BusAddress + 1);
-  Channels[0].Pressure = Channel1Atmosphere.Pressure ();
-  Channels[0].Temperature = Channel1Atmosphere.Temperature ();
-  #if GHVentilatorChannelCount >= 2
-  // Atmoshperic sensor to Patient 2.
-  BMP280 Channel2Atmosphere(Bus, BusAddress + 1);
-  Channels[1].Pressure = Channel2Atmosphere.Pressure ();
-  Channels[1].Temperature = Channel2Atmosphere.Temperature ();
-  #endif
-  #if GHVentilatorChannelCount >= 3
-  // Atmoshperic sensor to Patient 3.
-  BMP280 Channel3Atmosphere(Bus, BusAddress + 2);
-  Channels[2].Pressure = Channel3Atmosphere.Pressure ();
-  Channels[2].Temperature = Channel3Atmosphere.Temperature ();
-  #endif
-  #if GHVentilatorChannelCount >= 4
-  // Atmoshperic sensor to Patient 4.
-  BMP280 Channel4Atmosphere(Bus, BusAddress + 3);
-  Channels[3].Pressure = Channel4Atmosphere.Pressure ();
-  Channels[3].Temperature = Channel4Atmosphere.Temperature ();
-  #endif
-  
-  Init (TicksSecond, TicksPEEP,
-        ChamberPressureHysteresis, PatientPressureHysteresis);
-  
-  // Make sure you don't start the UpdateTicker until everything is setup to
-  // enter the Configuration State.
-  Ticker UpdateTicker;    //< The x times per second update ticker.
-  UpdateTicker.attach (callback(this, &GHVentilator::Update), 
-                       1.0f / float (TicksSecond));
-  
-  while (1) { // Poll the pressure and temperature.
-    Temperature = AtmosphereChamber.Temperature ();
-    Pressure  = AtmosphereChamber.Pressure();
-    
-    GHVentilatorChannel* Channel = &Channels[0];
-    Channel->Temperature = Channel1Atmosphere.Temperature ();
-    Channel->Pressure  = Channel1Atmosphere.Pressure();
-    Channel = &Channels[1];
-    #if GHVentilatorChannelCount >= 2
-    Channel->Temperature = Channel2Atmosphere.Temperature ();
-    Channel->Pressure  = Channel2Atmosphere.Pressure();
-    #endif
-    Channel = &Channels[2];
-    #if GHVentilatorChannelCount >= 3
-    Channel->Temperature = Channel3Atmosphere.Temperature ();
-    Channel->Pressure  = Channel3Atmosphere.Pressure();
-    #endif
-    Channel = &Channels[3];
-    #if GHVentilatorChannelCount >= 4
-    Channel->Temperature = Channel4Atmosphere.Temperature ();
-    Channel->Pressure  = Channel4Atmosphere.Pressure();
-    #endif
-  }
-}
-/*
-void RemoteTicksSecondSetHandle(Arguments* input, Reply* output) {
-  // Arguments are already parsed into argv array of char*
-  DDPrintf("Object name = %s\n",input->obj_name);
-  DPrintf("Method name = %s\n",input->method_name);
-  for (int i=0; i < input->argc; i++)
-  DPrintf("argv[%1d] = %s \n",i,input->argv[i]);
-  
-  // Alternatively the arguments can be recovered as the types expected
-  // by repeated calls to getArg()
-  int arg0 = input->getArg<int>();  // Expecting argv[0] to be int
-  DPrintf("Expecting argv[0] to be int = %d\n",arg0);
-  int arg1 = input->getArg<int>();  // Expecting argv[1] to be int
-  DPrintf("Expecting argv[1] to be int = %d\n",arg1);
- 
-  // The output parameter string is generated by calls to putData, which separates them with spaces.
-  output->putData(arg0);
-  output->putData(arg1);
-}
- 
-void HandleTicksInhaleExhaleSet(Arguments* input, Reply* output) {
-  DPrintf("\n? Object name=\"%s\" method_name=\"%s\" <",input->obj_name,input->method_name);
-  for (int i=0; i < input->argc; i++)
-    DPrintf("argv[%1d] = %s \n",i,input->argv[i]);
-  
-  int Index = input->getArg<int>();
-  int TicksInhale = input->getArg<int>();
-  int TicksExhale = input->getArg<int>();
- 
-  // The output parameter string is generated by calls to putData, which separates them with spaces.
-  output->putData(Channel->TicksInhaleExhaleSet(TicksInhale, TicksExhale));
-}
-
-
-RPCFunction TicksSecondSet(&HandleTicksSecondSet, "TicksSecondSet"),
-            InhaleExhaleTicksSet(&HandleTicksInhaleExhaleSet, "InhaleTicksSet");
-          */  
-} //< namespace SickBay
-#endif
\ No newline at end of file