The official mbed C/C SDK provides the software platform and libraries to build your applications.
Fork of mbed by
(01.May.2014) started sales! http://www.switch-science.com/catalog/1717/
(13.March.2014) updated to 0.5.0
This is a pin conversion PCB from mbed 1768/11U24 to arduino UNO.
- So if you have both mbed and arduino shields, I guess you would be happy with such a conversion board :)
Photos
- Board photo vvv
- Schematic photo vvv
- Functionality photo vvv
Latest eagle files
PCB >> /media/uploads/k4zuki/mbedshield050.brd
SCH >> /media/uploads/k4zuki/mbedshield050.sch
BIG changes from previous version
- Ethernet RJ45 connector is removed.
- http://mbed.org/components/Seeed-Ethernet-Shield-V20/ is the biggest hint to use Ethernet!
MostALL of components can be bought at Akizuki http://akizukidenshi.com/- But sorry, they do not send parts to abroad
- Pinout is changed!
arduino | 0.4.0 | 0.5.0 |
---|---|---|
D4 | p12 | p21 |
D5 | p11 | p22 |
MOSI_ | none | p11 |
MISO_ | none | p12 |
SCK_ | none | p13 |
This design has bug(s)
- I2C functional pin differs between 1768 and 11U24.
Fixed bugs here
- MiniUSB cable cannot be connected on mbed if you solder high-height electrolytic capacitor on C3.
- http://akizukidenshi.com/catalog/g/gP-05002/ is the solution to make this 100% AKIZUKI parts!
- the 6-pin ISP port is not inprimented in version 0.4.0
it will be fixed in later version 0.4.1/0.4.2/0.5.0This has beenfixed
I am doing some porting to use existing arduino shields but it may faster if you do it by yourself...
you can use arduino PinName "A0-A5,D0-D13" plus backside SPI port for easier porting.
To do this you have to edit PinName enum in
- "mbed/TARGET_LPC1768/PinNames.h" or
- "mbed/TARGET_LPC11U24/PinNames.h" as per your target mbed.
here is the actual list: This list includes define switch to switch pin assignment
part_of_PinNames.h
USBTX = P0_2, USBRX = P0_3, //from here mbeDshield mod D0=p27, D1=p28, D2=p14, D3=p13, #ifdef MBEDSHIELD_050 MOSI_=p11, MISO_=p12, SCK_=p13, D4=p21, D5=p22, #else D4=p12, D5=p11, #endif D6=p23, D7=p24, D8=p25, D9=p26, D10=p8, D11=p5, D12=p6, D13=p7, A0=p15, A1=p16, A2=p17, A3=p18, A4=p19, A5=p20, SDA=p9, SCL=p10, //mbeDshield mod ends here // Not connected NC = (int)0xFFFFFFFF
Diff: BusInOut.h
- Revision:
- 65:5798e58a58b1
- Parent:
- 59:0883845fe643
diff -r e3affc9e7238 -r 5798e58a58b1 BusInOut.h --- a/BusInOut.h Mon Aug 05 12:28:09 2013 +0300 +++ b/BusInOut.h Mon Aug 12 13:17:46 2013 +0300 @@ -1,93 +1,93 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#ifndef MBED_BUSINOUT_H -#define MBED_BUSINOUT_H - -#include "DigitalInOut.h" - -namespace mbed { - -/** A digital input output bus, used for setting the state of a collection of pins - */ -class BusInOut { - -public: - - /** Create an BusInOut, connected to the specified pins - * - * @param p<n> DigitalInOut pin to connect to bus bit p<n> (p5-p30, NC) - * - * @note - * It is only required to specify as many pin variables as is required - * for the bus; the rest will default to NC (not connected) - */ - BusInOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC, - PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC, - PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC, - PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC); - - BusInOut(PinName pins[16]); - - virtual ~BusInOut(); - - /* Group: Access Methods */ - - /** Write the value to the output bus - * - * @param value An integer specifying a bit to write for every corresponding DigitalInOut pin - */ - void write(int value); - - - /** Read the value currently output on the bus - * - * @returns - * An integer with each bit corresponding to associated DigitalInOut pin setting - */ - int read(); - - /** Set as an output - */ - void output(); - - /** Set as an input - */ - void input(); - - /** Set the input pin mode - * - * @param mode PullUp, PullDown, PullNone - */ - void mode(PinMode pull); - -#ifdef MBED_OPERATORS - /** A shorthand for write() - */ - BusInOut& operator= (int v); - BusInOut& operator= (BusInOut& rhs); - - /** A shorthand for read() - */ - operator int(); -#endif - -protected: - DigitalInOut* _pin[16]; -}; - -} // namespace mbed - -#endif +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_BUSINOUT_H +#define MBED_BUSINOUT_H + +#include "DigitalInOut.h" + +namespace mbed { + +/** A digital input output bus, used for setting the state of a collection of pins + */ +class BusInOut { + +public: + + /** Create an BusInOut, connected to the specified pins + * + * @param p<n> DigitalInOut pin to connect to bus bit p<n> (p5-p30, NC) + * + * @note + * It is only required to specify as many pin variables as is required + * for the bus; the rest will default to NC (not connected) + */ + BusInOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC, + PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC, + PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC, + PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC); + + BusInOut(PinName pins[16]); + + virtual ~BusInOut(); + + /* Group: Access Methods */ + + /** Write the value to the output bus + * + * @param value An integer specifying a bit to write for every corresponding DigitalInOut pin + */ + void write(int value); + + + /** Read the value currently output on the bus + * + * @returns + * An integer with each bit corresponding to associated DigitalInOut pin setting + */ + int read(); + + /** Set as an output + */ + void output(); + + /** Set as an input + */ + void input(); + + /** Set the input pin mode + * + * @param mode PullUp, PullDown, PullNone + */ + void mode(PinMode pull); + +#ifdef MBED_OPERATORS + /** A shorthand for write() + */ + BusInOut& operator= (int v); + BusInOut& operator= (BusInOut& rhs); + + /** A shorthand for read() + */ + operator int(); +#endif + +protected: + DigitalInOut* _pin[16]; +}; + +} // namespace mbed + +#endif