Kazuki Yamamoto
The official mbed C/C SDK provides the software platform and libraries to build your applications.
Fork of
mbed
by 
mbed official
(01.May.2014) started sales! http://www.switch-science.com/catalog/1717/
(13.March.2014) updated to 0.5.0
This is a pin conversion PCB from mbed 1768/11U24 to arduino UNO.
- So if you have both mbed and arduino shields, I guess you would be happy with such a conversion board :)
Photos
- Board photo vvv
- Schematic photo vvv
- Functionality photo vvv
Latest eagle files
PCB >> /media/uploads/k4zuki/mbedshield050.brd
SCH >> /media/uploads/k4zuki/mbedshield050.sch
BIG changes from previous version
- Ethernet RJ45 connector is removed.
- http://mbed.org/components/Seeed-Ethernet-Shield-V20/ is the biggest hint to use Ethernet!
MostALL of components can be bought at Akizuki http://akizukidenshi.com/- But sorry, they do not send parts to abroad
- Pinout is changed!
| arduino | 0.4.0 | 0.5.0 |
|---|---|---|
| D4 | p12 | p21 |
| D5 | p11 | p22 |
| MOSI_ | none | p11 |
| MISO_ | none | p12 |
| SCK_ | none | p13 |
This design has bug(s)
- I2C functional pin differs between 1768 and 11U24.
Fixed bugs here
- MiniUSB cable cannot be connected on mbed if you solder high-height electrolytic capacitor on C3.
- http://akizukidenshi.com/catalog/g/gP-05002/ is the solution to make this 100% AKIZUKI parts!
- the 6-pin ISP port is not inprimented in version 0.4.0
it will be fixed in later version 0.4.1/0.4.2/0.5.0This has beenfixed
I am doing some porting to use existing arduino shields but it may faster if you do it by yourself...
you can use arduino PinName "A0-A5,D0-D13" plus backside SPI port for easier porting.
To do this you have to edit PinName enum in
- "mbed/TARGET_LPC1768/PinNames.h" or
- "mbed/TARGET_LPC11U24/PinNames.h" as per your target mbed.
here is the actual list: This list includes define switch to switch pin assignment
part_of_PinNames.h
USBTX = P0_2,
USBRX = P0_3,
//from here mbeDshield mod
D0=p27,
D1=p28,
D2=p14,
D3=p13,
#ifdef MBEDSHIELD_050
MOSI_=p11,
MISO_=p12,
SCK_=p13,
D4=p21,
D5=p22,
#else
D4=p12,
D5=p11,
#endif
D6=p23,
D7=p24,
D8=p25,
D9=p26,
D10=p8,
D11=p5,
D12=p6,
D13=p7,
A0=p15,
A1=p16,
A2=p17,
A3=p18,
A4=p19,
A5=p20,
SDA=p9,
SCL=p10,
//mbeDshield mod ends here
// Not connected
NC = (int)0xFFFFFFFF
TARGET_LPC1768/TOOLCHAIN_IAR/LPC17xx.icf
- Committer:
- bogdanm
- Date:
- 2013-08-05
- Revision:
- 64:e3affc9e7238
- Parent:
- LPC1768/IAR/LPC17xx.icf@ 58:0954ebd79f59
- Child:
- 65:5798e58a58b1
File content as of revision 64:e3affc9e7238:
/* [ROM] */
define symbol __intvec_start__ = 0x00000000;
define symbol __region_ROM_start__ = 0x00000000;
define symbol __CRP_start__ = 0x000002FC;
define symbol __CRP_end__ = 0x000002FF;
define symbol __region_ROM_end__ = 0x0007FFFF;
/* [RAM] Vector table dynamic copy: 8_byte_aligned(49 vect * 4 bytes) = 8_byte_aligned(0xC4) = 0xC8*/
define symbol __NVIC_start__ = 0x10000000;
define symbol __NVIC_end__ = 0x100000C7;
define symbol __region_RAM_start__ = 0x100000C8;
define symbol __region_RAM_end__ = 0x1000FFDF;
define symbol _AHB_RAM_start__ = 0x2007C000;
define symbol _AHB_RAM_end__ = 0x20083FFF;
/* Memory regions */
define memory mem with size = 4G;
define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
define region AHB_RAM_region = mem:[from _AHB_RAM_start__ to _AHB_RAM_end__];
/* Stack and Heap */
define symbol __size_cstack__ = 0x800;
define symbol __size_heap__ = 0x800;
define block CSTACK with alignment = 8, size = __size_cstack__ { };
define block HEAP with alignment = 8, size = __size_heap__ { };
define block STACKHEAP with fixed order { block HEAP, block CSTACK };
initialize by copy with packing = zeros { readwrite };
do not initialize { section .noinit };
place at address mem:__intvec_start__ { section .intvec };
place at address mem:0x2FC { section CRPKEY };
place in ROM_region { readonly };
place in RAM_region { readwrite, block STACKHEAP };
place in AHB_RAM_region { section USB_RAM };
place in CRP_region { section .crp };