The official mbed C/C SDK provides the software platform and libraries to build your applications.
Fork of mbed by
(01.May.2014) started sales! http://www.switch-science.com/catalog/1717/
(13.March.2014) updated to 0.5.0
This is a pin conversion PCB from mbed 1768/11U24 to arduino UNO.
- So if you have both mbed and arduino shields, I guess you would be happy with such a conversion board :)
Photos
- Board photo vvv
- Schematic photo vvv
- Functionality photo vvv
Latest eagle files
PCB >> /media/uploads/k4zuki/mbedshield050.brd
SCH >> /media/uploads/k4zuki/mbedshield050.sch
BIG changes from previous version
- Ethernet RJ45 connector is removed.
- http://mbed.org/components/Seeed-Ethernet-Shield-V20/ is the biggest hint to use Ethernet!
MostALL of components can be bought at Akizuki http://akizukidenshi.com/- But sorry, they do not send parts to abroad
- Pinout is changed!
arduino | 0.4.0 | 0.5.0 |
---|---|---|
D4 | p12 | p21 |
D5 | p11 | p22 |
MOSI_ | none | p11 |
MISO_ | none | p12 |
SCK_ | none | p13 |
This design has bug(s)
- I2C functional pin differs between 1768 and 11U24.
Fixed bugs here
- MiniUSB cable cannot be connected on mbed if you solder high-height electrolytic capacitor on C3.
- http://akizukidenshi.com/catalog/g/gP-05002/ is the solution to make this 100% AKIZUKI parts!
- the 6-pin ISP port is not inprimented in version 0.4.0
it will be fixed in later version 0.4.1/0.4.2/0.5.0This has beenfixed
I am doing some porting to use existing arduino shields but it may faster if you do it by yourself...
you can use arduino PinName "A0-A5,D0-D13" plus backside SPI port for easier porting.
To do this you have to edit PinName enum in
- "mbed/TARGET_LPC1768/PinNames.h" or
- "mbed/TARGET_LPC11U24/PinNames.h" as per your target mbed.
here is the actual list: This list includes define switch to switch pin assignment
part_of_PinNames.h
USBTX = P0_2, USBRX = P0_3, //from here mbeDshield mod D0=p27, D1=p28, D2=p14, D3=p13, #ifdef MBEDSHIELD_050 MOSI_=p11, MISO_=p12, SCK_=p13, D4=p21, D5=p22, #else D4=p12, D5=p11, #endif D6=p23, D7=p24, D8=p25, D9=p26, D10=p8, D11=p5, D12=p6, D13=p7, A0=p15, A1=p16, A2=p17, A3=p18, A4=p19, A5=p20, SDA=p9, SCL=p10, //mbeDshield mod ends here // Not connected NC = (int)0xFFFFFFFF
TARGET_LPC1768/TOOLCHAIN_GCC_ARM/LPC1768.ld
- Committer:
- bogdanm
- Date:
- 2013-08-05
- Revision:
- 64:e3affc9e7238
- Parent:
- LPC1768/GCC_ARM/LPC1768.ld@ 44:24d45a770a51
- Child:
- 65:5798e58a58b1
File content as of revision 64:e3affc9e7238:
/* Linker script for mbed LPC1768 */ /* Linker script to configure memory regions. */ MEMORY { FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 512K RAM (rwx) : ORIGIN = 0x100000C8, LENGTH = 0x7F38 USB_RAM(rwx) : ORIGIN = 0x2007C000, LENGTH = 16K ETH_RAM(rwx) : ORIGIN = 0x20080000, LENGTH = 16K } /* Linker script to place sections and symbol values. Should be used together * with other linker script that defines memory regions FLASH and RAM. * It references following symbols, which must be defined in code: * Reset_Handler : Entry of reset handler * * It defines following symbols, which code can use without definition: * __exidx_start * __exidx_end * __etext * __data_start__ * __preinit_array_start * __preinit_array_end * __init_array_start * __init_array_end * __fini_array_start * __fini_array_end * __data_end__ * __bss_start__ * __bss_end__ * __end__ * end * __HeapLimit * __StackLimit * __StackTop * __stack */ ENTRY(Reset_Handler) SECTIONS { .text : { KEEP(*(.isr_vector)) *(.text*) KEEP(*(.init)) KEEP(*(.fini)) /* .ctors */ *crtbegin.o(.ctors) *crtbegin?.o(.ctors) *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) *(SORT(.ctors.*)) *(.ctors) /* .dtors */ *crtbegin.o(.dtors) *crtbegin?.o(.dtors) *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) *(SORT(.dtors.*)) *(.dtors) *(.rodata*) KEEP(*(.eh_frame*)) } > FLASH .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } > FLASH __exidx_start = .; .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } > FLASH __exidx_end = .; __etext = .; .data : AT (__etext) { __data_start__ = .; *(vtable) *(.data*) . = ALIGN(4); /* preinit data */ PROVIDE (__preinit_array_start = .); KEEP(*(.preinit_array)) PROVIDE (__preinit_array_end = .); . = ALIGN(4); /* init data */ PROVIDE (__init_array_start = .); KEEP(*(SORT(.init_array.*))) KEEP(*(.init_array)) PROVIDE (__init_array_end = .); . = ALIGN(4); /* finit data */ PROVIDE (__fini_array_start = .); KEEP(*(SORT(.fini_array.*))) KEEP(*(.fini_array)) PROVIDE (__fini_array_end = .); . = ALIGN(4); /* All data end */ __data_end__ = .; } > RAM .bss : { __bss_start__ = .; *(.bss*) *(COMMON) __bss_end__ = .; } > RAM .heap : { __end__ = .; end = __end__; *(.heap*) __HeapLimit = .; } > RAM /* .stack_dummy section doesn't contains any symbols. It is only * used for linker to calculate size of stack sections, and assign * values to stack symbols later */ .stack_dummy : { *(.stack) } > RAM /* Set stack top to end of RAM, and stack limit move down by * size of stack_dummy section */ __StackTop = ORIGIN(RAM) + LENGTH(RAM); __StackLimit = __StackTop - SIZEOF(.stack_dummy); PROVIDE(__stack = __StackTop); /* Check if data + heap + stack exceeds RAM limit */ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") }