The official mbed C/C SDK provides the software platform and libraries to build your applications.
Fork of mbed by
(01.May.2014) started sales! http://www.switch-science.com/catalog/1717/
(13.March.2014) updated to 0.5.0
This is a pin conversion PCB from mbed 1768/11U24 to arduino UNO.
- So if you have both mbed and arduino shields, I guess you would be happy with such a conversion board :)
Photos
- Board photo vvv
- Schematic photo vvv
- Functionality photo vvv
Latest eagle files
PCB >> /media/uploads/k4zuki/mbedshield050.brd
SCH >> /media/uploads/k4zuki/mbedshield050.sch
BIG changes from previous version
- Ethernet RJ45 connector is removed.
- http://mbed.org/components/Seeed-Ethernet-Shield-V20/ is the biggest hint to use Ethernet!
MostALL of components can be bought at Akizuki http://akizukidenshi.com/- But sorry, they do not send parts to abroad
- Pinout is changed!
arduino | 0.4.0 | 0.5.0 |
---|---|---|
D4 | p12 | p21 |
D5 | p11 | p22 |
MOSI_ | none | p11 |
MISO_ | none | p12 |
SCK_ | none | p13 |
This design has bug(s)
- I2C functional pin differs between 1768 and 11U24.
Fixed bugs here
- MiniUSB cable cannot be connected on mbed if you solder high-height electrolytic capacitor on C3.
- http://akizukidenshi.com/catalog/g/gP-05002/ is the solution to make this 100% AKIZUKI parts!
- the 6-pin ISP port is not inprimented in version 0.4.0
it will be fixed in later version 0.4.1/0.4.2/0.5.0This has beenfixed
I am doing some porting to use existing arduino shields but it may faster if you do it by yourself...
you can use arduino PinName "A0-A5,D0-D13" plus backside SPI port for easier porting.
To do this you have to edit PinName enum in
- "mbed/TARGET_LPC1768/PinNames.h" or
- "mbed/TARGET_LPC11U24/PinNames.h" as per your target mbed.
here is the actual list: This list includes define switch to switch pin assignment
part_of_PinNames.h
USBTX = P0_2, USBRX = P0_3, //from here mbeDshield mod D0=p27, D1=p28, D2=p14, D3=p13, #ifdef MBEDSHIELD_050 MOSI_=p11, MISO_=p12, SCK_=p13, D4=p21, D5=p22, #else D4=p12, D5=p11, #endif D6=p23, D7=p24, D8=p25, D9=p26, D10=p8, D11=p5, D12=p6, D13=p7, A0=p15, A1=p16, A2=p17, A3=p18, A4=p19, A5=p20, SDA=p9, SCL=p10, //mbeDshield mod ends here // Not connected NC = (int)0xFFFFFFFF
DigitalIn.h@55:d722ed6a4237, 2013-01-16 (annotated)
- Committer:
- emilmont
- Date:
- Wed Jan 16 12:56:34 2013 +0000
- Revision:
- 55:d722ed6a4237
- Parent:
- 54:71b101360fb9
- Child:
- 59:0883845fe643
Include "sleep_api.h" in "mbed.h"
Add initial IAR toolchain support
LPC I2C: better handling of status
Add sleep mode support for the LPC1768
Correct GCC "__semihost" definition
Correct GCC "_isatty" retargeting
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
emilmont | 44:24d45a770a51 | 1 | /* mbed Microcontroller Library |
emilmont | 54:71b101360fb9 | 2 | * Copyright (c) 2006-2013 ARM Limited |
emilmont | 44:24d45a770a51 | 3 | * |
emilmont | 44:24d45a770a51 | 4 | * Permission is hereby granted, free of charge, to any person obtaining a copy |
emilmont | 44:24d45a770a51 | 5 | * of this software and associated documentation files (the "Software"), to deal |
emilmont | 44:24d45a770a51 | 6 | * in the Software without restriction, including without limitation the rights |
emilmont | 44:24d45a770a51 | 7 | * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
emilmont | 44:24d45a770a51 | 8 | * copies of the Software, and to permit persons to whom the Software is |
emilmont | 44:24d45a770a51 | 9 | * furnished to do so, subject to the following conditions: |
emilmont | 44:24d45a770a51 | 10 | * |
emilmont | 44:24d45a770a51 | 11 | * The above copyright notice and this permission notice shall be included in |
emilmont | 44:24d45a770a51 | 12 | * all copies or substantial portions of the Software. |
emilmont | 44:24d45a770a51 | 13 | * |
emilmont | 44:24d45a770a51 | 14 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
emilmont | 44:24d45a770a51 | 15 | * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
emilmont | 44:24d45a770a51 | 16 | * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
emilmont | 44:24d45a770a51 | 17 | * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
emilmont | 44:24d45a770a51 | 18 | * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
emilmont | 44:24d45a770a51 | 19 | * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
emilmont | 44:24d45a770a51 | 20 | * SOFTWARE. |
emilmont | 44:24d45a770a51 | 21 | */ |
simon.ford@mbed.co.uk | 0:82220227f4fa | 22 | #ifndef MBED_DIGITALIN_H |
simon.ford@mbed.co.uk | 0:82220227f4fa | 23 | #define MBED_DIGITALIN_H |
simon.ford@mbed.co.uk | 0:82220227f4fa | 24 | |
rolf.meyer@arm.com | 11:1c1ebd0324fa | 25 | #include "platform.h" |
emilmont | 44:24d45a770a51 | 26 | |
emilmont | 44:24d45a770a51 | 27 | #include "gpio_api.h" |
simon.ford@mbed.co.uk | 0:82220227f4fa | 28 | |
simon.ford@mbed.co.uk | 0:82220227f4fa | 29 | namespace mbed { |
simon.ford@mbed.co.uk | 0:82220227f4fa | 30 | |
emilmont | 43:e2ed12d17f06 | 31 | /** A digital input, used for reading the state of a pin |
simon.ford@mbed.co.uk | 5:62573be585e9 | 32 | * |
simon.ford@mbed.co.uk | 5:62573be585e9 | 33 | * Example: |
emilmont | 43:e2ed12d17f06 | 34 | * @code |
emilmont | 43:e2ed12d17f06 | 35 | * // Flash an LED while a DigitalIn is true |
emilmont | 55:d722ed6a4237 | 36 | * |
emilmont | 43:e2ed12d17f06 | 37 | * #include "mbed.h" |
emilmont | 55:d722ed6a4237 | 38 | * |
emilmont | 43:e2ed12d17f06 | 39 | * DigitalIn enable(p5); |
emilmont | 43:e2ed12d17f06 | 40 | * DigitalOut led(LED1); |
emilmont | 55:d722ed6a4237 | 41 | * |
emilmont | 43:e2ed12d17f06 | 42 | * int main() { |
emilmont | 43:e2ed12d17f06 | 43 | * while(1) { |
emilmont | 43:e2ed12d17f06 | 44 | * if(enable) { |
emilmont | 43:e2ed12d17f06 | 45 | * led = !led; |
emilmont | 43:e2ed12d17f06 | 46 | * } |
emilmont | 43:e2ed12d17f06 | 47 | * wait(0.25); |
emilmont | 43:e2ed12d17f06 | 48 | * } |
emilmont | 43:e2ed12d17f06 | 49 | * } |
emilmont | 43:e2ed12d17f06 | 50 | * @endcode |
simon.ford@mbed.co.uk | 0:82220227f4fa | 51 | */ |
emilmont | 44:24d45a770a51 | 52 | class DigitalIn { |
simon.ford@mbed.co.uk | 0:82220227f4fa | 53 | |
simon.ford@mbed.co.uk | 0:82220227f4fa | 54 | public: |
emilmont | 43:e2ed12d17f06 | 55 | /** Create a DigitalIn connected to the specified pin |
rolf.meyer@arm.com | 11:1c1ebd0324fa | 56 | * |
emilmont | 43:e2ed12d17f06 | 57 | * @param pin DigitalIn pin to connect to |
emilmont | 43:e2ed12d17f06 | 58 | * @param name (optional) A string to identify the object |
rolf.meyer@arm.com | 11:1c1ebd0324fa | 59 | */ |
emilmont | 44:24d45a770a51 | 60 | DigitalIn(PinName pin) { |
emilmont | 44:24d45a770a51 | 61 | gpio_init(&gpio, pin, PIN_INPUT); |
emilmont | 44:24d45a770a51 | 62 | } |
emilmont | 55:d722ed6a4237 | 63 | |
emilmont | 43:e2ed12d17f06 | 64 | /** Read the input, represented as 0 or 1 (int) |
rolf.meyer@arm.com | 11:1c1ebd0324fa | 65 | * |
emilmont | 43:e2ed12d17f06 | 66 | * @returns |
emilmont | 55:d722ed6a4237 | 67 | * An integer representing the state of the input pin, |
emilmont | 43:e2ed12d17f06 | 68 | * 0 for logical 0, 1 for logical 1 |
simon.ford@mbed.co.uk | 5:62573be585e9 | 69 | */ |
simon.ford@mbed.co.uk | 18:b3c9f16cbb96 | 70 | int read() { |
emilmont | 44:24d45a770a51 | 71 | return gpio_read(&gpio); |
simon.ford@mbed.co.uk | 18:b3c9f16cbb96 | 72 | } |
emilmont | 55:d722ed6a4237 | 73 | |
emilmont | 43:e2ed12d17f06 | 74 | /** Set the input pin mode |
rolf.meyer@arm.com | 11:1c1ebd0324fa | 75 | * |
emilmont | 43:e2ed12d17f06 | 76 | * @param mode PullUp, PullDown, PullNone, OpenDrain |
simon.ford@mbed.co.uk | 5:62573be585e9 | 77 | */ |
emilmont | 44:24d45a770a51 | 78 | void mode(PinMode pull) { |
emilmont | 44:24d45a770a51 | 79 | gpio_mode(&gpio, pull); |
emilmont | 44:24d45a770a51 | 80 | } |
emilmont | 55:d722ed6a4237 | 81 | |
emilmont | 44:24d45a770a51 | 82 | #ifdef MBED_OPERATORS |
emilmont | 43:e2ed12d17f06 | 83 | /** An operator shorthand for read() |
simon.ford@mbed.co.uk | 0:82220227f4fa | 84 | */ |
simon.ford@mbed.co.uk | 18:b3c9f16cbb96 | 85 | operator int() { |
simon.ford@mbed.co.uk | 18:b3c9f16cbb96 | 86 | return read(); |
simon.ford@mbed.co.uk | 18:b3c9f16cbb96 | 87 | } |
rolf.meyer@arm.com | 11:1c1ebd0324fa | 88 | #endif |
simon.ford@mbed.co.uk | 5:62573be585e9 | 89 | |
simon.ford@mbed.co.uk | 0:82220227f4fa | 90 | protected: |
emilmont | 44:24d45a770a51 | 91 | gpio_t gpio; |
simon.ford@mbed.co.uk | 0:82220227f4fa | 92 | }; |
simon.ford@mbed.co.uk | 0:82220227f4fa | 93 | |
rolf.meyer@arm.com | 11:1c1ebd0324fa | 94 | } // namespace mbed |
simon.ford@mbed.co.uk | 0:82220227f4fa | 95 | |
simon.ford@mbed.co.uk | 1:6b7f447ca868 | 96 | #endif |