Kazuki Yamamoto / Mbed 2 deprecated ika_shouyu_poppoyaki

Ika Shouyu Poppoyaki - LPC82x supported

Dependencies:   MODSERIAL mbed

Fork of ika_shouyu_poppoyaki by Tedd OKANO

_user_settings.h@42:2b40666d8177, 2014-10-18 (annotated)

Committer:
k4zuki
Date:
Sat Oct 18 07:36:54 2014 +0000
Revision:
42:2b40666d8177
Parent:
41:74b9ff21098f 
LPC82x series supported (only 824 is tested)

Who changed what in which revision?

UserRevisionLine numberNew contents of line
okano 29:96e28bc1bd99 1 #ifndef MBED_ISP___USER_SETTINGS__
okano 29:96e28bc1bd99 2 #define MBED_ISP___USER_SETTINGS__
okano 26:a63e73885b21 3
k4zuki 42:2b40666d8177 4 /// file name for the binary data
okano 41:74b9ff21098f 5 // edit here if you need to use different file name or storage media
okano 41:74b9ff21098f 6 #define SOURCE_FILE "/local/bin"
okano 26:a63e73885b21 7
okano 25:33cb5ad8ae24 8
okano 25:33cb5ad8ae24 9 // "ISP_BAUD_RATE" is baud rate for ISP operation
okano 25:33cb5ad8ae24 10 #define ISP_BAUD_RATE 115200
okano 25:33cb5ad8ae24 11
okano 33:ce9fff4cbf09 12
okano 25:33cb5ad8ae24 13 // "TARGET_OPERATION_BAUD_RATE" is baud rate for USB-serial bridge operation after
okano 25:33cb5ad8ae24 14 // ISP completion.
okano 25:33cb5ad8ae24 15 // if the target application uses serial(UART) and you use the bridge feature,
okano 25:33cb5ad8ae24 16 // please set this value correctly.
okano 26:a63e73885b21 17 #define TARGET_OPERATION_BAUD_RATE 9600
okano 25:33cb5ad8ae24 18
okano 33:ce9fff4cbf09 19
okano 41:74b9ff21098f 20 // suppress "command and result" monitoring output to terminal
okano 41:74b9ff21098f 21 // the "command and result" monitoring feature is made for debugging.
okano 41:74b9ff21098f 22 #define SUPPRESS_COMMAND_RESULT_MESSAGE
okano 41:74b9ff21098f 23
okano 41:74b9ff21098f 24
okano 26:a63e73885b21 25 // enable "AUTO_PROGRAM_START" to let target starts the program after flash writing complete
okano 26:a63e73885b21 26 #define AUTO_PROGRAM_START
okano 26:a63e73885b21 27
okano 26:a63e73885b21 28
okano 34:eaca33d3e632 29 // disabling "ENABLE_WRITING" can be used for "verification only" operation.
okano 34:eaca33d3e632 30 #define ENABLE_WRITING
okano 34:eaca33d3e632 31
okano 34:eaca33d3e632 32
okano 33:ce9fff4cbf09 33 // enable "ENABLE_VERIFYING" to let perform verification by comparing "bin" file and flash read data.
okano 33:ce9fff4cbf09 34 #define ENABLE_VERIFYING
okano 29:96e28bc1bd99 35
okano 33:ce9fff4cbf09 36
okano 33:ce9fff4cbf09 37 // enable "CHECK_CRP_CODE" to check the CRP (Code Read Protection). The ISP writing will be ignored if "bin" file has CRP code.
okano 33:ce9fff4cbf09 38 #define CHECK_CRP_CODE
okano 33:ce9fff4cbf09 39
okano 33:ce9fff4cbf09 40
okano 33:ce9fff4cbf09 41 #endif // MBED_ISP___USER_SETTINGS__
okano 33:ce9fff4cbf09 42
okano 35:0b434ef4af49 43
okano 35:0b434ef4af49 44
okano 35:0b434ef4af49 45
okano 35:0b434ef4af49 46 ////////////////////////////
okano 35:0b434ef4af49 47 // FOLLOWING IS MESSAGE THAT WILL BE SHOWN WHEN COMPILE THIS CODE
okano 35:0b434ef4af49 48 // you can edit next lines if you want remove error/warning message
okano 35:0b434ef4af49 49 ///////////////////////////
okano 35:0b434ef4af49 50
okano 35:0b434ef4af49 51 #if defined( ENABLE_WRITING ) && defined( ENABLE_VERIFYING )
okano 35:0b434ef4af49 52 #define WHAT_WAS_DONE "written and verified"
okano 35:0b434ef4af49 53 #elif defined( ENABLE_WRITING ) && !defined( ENABLE_VERIFYING )
okano 35:0b434ef4af49 54 #define WHAT_WAS_DONE "written"
okano 35:0b434ef4af49 55 #warning "ENABLE_VERIFYING" in "_user_setting.h" is disabled. No verification will be performed.
okano 35:0b434ef4af49 56 #elif !defined( ENABLE_WRITING ) && defined( ENABLE_VERIFYING )
okano 35:0b434ef4af49 57 #define WHAT_WAS_DONE "verified"
okano 35:0b434ef4af49 58 #warning "ENABLE_WRITING" in "_user_setting.h" is disabled. No writing will be performed.
okano 35:0b434ef4af49 59 #else
okano 35:0b434ef4af49 60 #error both "ENABLE_WRITING" and "ENABLE_VERIFYING" are disabled ("in user_setting.h"). The program need to execute nothing
okano 35:0b434ef4af49 61 #endif
okano 35:0b434ef4af49 62