forked library
Fork of Ser23K256 by
Ser23K256.h
- Committer:
- marcelvandekamp
- Date:
- 2011-03-04
- Revision:
- 0:d049f6422506
- Child:
- 1:d8180cb9d9ab
File content as of revision 0:d049f6422506:
/** Ser23K256 - drive the Microchip 23K256 SRAM using SPI * Copyright (c) 2010 Romilly Cocking * Released under the MIT License: http://mbed.org/license/mit * * 23K256 data sheet at http://ww1.microchip.com/downloads/en/DeviceDoc/22100B.pdf * * Page-mode commands have not been implemented; I have found no need for them yet. * * Assumes spi mode is default (8,0). * * You can clock the 23K256 at up to 20MHz, so it supports the mbed's maximum SPI frequency of 12MHz. */ #include "mbed.h" #ifndef SER23K256_H #define SER23K256_H // mode codes for 23K256 #define BYTE_MODE 0x00 #define SEQUENTIAL_MODE 0x40 // command codes for 23K256 #define READ 0x03 #define WRITE 0x02 #define READ_STATUS 0x05 // called RDSR in datasheet #define WRITE_STATUS 0x01 // called WRSR in datasheet /** An interface for the Microchip 32k byte 23K256 SRAM over SPI * * * * @code * #include "mbed.h" * #include "Ser23K256.h" * * * SPI spi(p5,p6,p7); * Ser23K256 sram(spi,p14); * * int main() { * char buff[50]; * sram.write(0, 'h'); * sram.write(1, 'i'); * sram.write(2, '!'); * sram.write(3, '\0'); * for (int address = 0; address < 4; address++) { * buff[address] = sram.read(address); * } * printf("sram = %s\r\n", buff); * sram.write(0, "Hello world!",12); * sram.read(0, buff, 12); * buff[12]='\0'; * printf("now = %s\r\n", buff); *} * @endcode * connections: * chip pin 1 to mbed ncs (see below) * chip pin 2 SO to mbed MISO * chip pin 3 - no connection * chip pin 4 to mbed Gnd * chip pin 5 SI pin to mbed MOSI * chip pin 6 SCK to mbed sck * chip pin 7 (notHOLD) to mbed Vout * chip pin 8 to mbed Vout */ class Ser23K256 { public: /** Create an interface * * * @param spi An SPI object * @param ncs Not chip select pin - any free Digital pin will do */ Ser23K256(SPI& spi, PinName ncs); /** read a byte from SRAM * @param address The address to read from * @return the character at that address */ char read(int address); /** read multiple bytes from SRAM into a buffer * @param address The SRAM address to read from * @param buffer The buffer to read into (must be big enough!) * @param count The number of bytes to read */ void read(int address, char * buffer, int count); /** write a byte to SRAM * @param address The address SRAM to write to * @param byte The byte to write there */ void write(int address, char byte); /** write multiple bytes to SRAM from a buffer * @param address The SRAM address write to * @param buffer The buffer to write from * @param count The number of bytes to write */ void write(int address, char * buffer, int count); private: SPI& _spi; DigitalOut _ncs; char readStatus(); void writeStatus(char status); void prepareCommand(char command, int address); void select(); void deselect(); }; #endif